drivers/block/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

drivers/ata/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

include/acpi/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

drivers/acpi/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

arch/um: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

include/asm-parisc/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

arch/parisc/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

include/asm-mips/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

arch/mips/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

arch/m32r/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

arch/h8300/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

include/asm-arm/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

arch/arm/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

MAINTAINERS: update Corey Thomas email address

On Sat, 2007-12-22 at 18:08 -0500, Corey Thomas wrote:
> This email, coreythomas@charter.net is good.  ISP change.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

MAINTAINERS: remove Adam Fritzler, remove his email address in other sources

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

asm-*/compat.h: fix typo in comment

Signed-off-by: Marcin Ślusarz <marcin.slusarz@gmail.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

doc: use correct debugfs mountpoint

Use the normal, expected mountpoint in the relay(fs) example
for debugfs.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

dio: fix kernel-doc notation

Fix kernel-doc in drivers/dio/ so that it is formatted correctly
and the parameter names match the function parameters.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-By: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

Documentation/BUG-HUNTING whitespace cleanup

Just a little whitespace cleanup patch for Documentation/BUG-HUNTING

Signed-off-by: Clemens Koller <clemens.koller@anagramm.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

Remove one useless extern declaration

The file exit.c contains one useless extern declaration of sem_exit().
Moreover, it refers to nothing.

This trivial patch removes it.

Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

time: delete comments that refer to noexistent symbols

Function do_timer_interrupt_hook() don't take argument regs,
and structure hrtimer_sleeper don't have member cb_pending.
So delete comments refering to these symbols.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

Documentation: missing proc/$PID/stat field

There's a missing field in the /proc/$PID/stat output documented in
Documentation/filesystems/proc.txt.

Signed-off-by: Adrian Bunk <bunk@kernel.org>

radix_tree.h trivial comment correction

There is an unmatched parenthesis in the locking commentary of radix_tree.h
which is trivially fixed by the patch below.

Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

correct missing a double quote in configfs.txt

Signed-off-by: Masatake YAMATO <jet@gyve.org>
Acked-by: Joel Becker <Joel.Becker@oracle.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

jonada720: remove duplicate include

Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

bf54x: remove duplicate include

Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

gameport: remove duplicate include

Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

vga.h: Fix prepocessor warning

Mark comment as comment, fixes:
include/asm/vga.h:6:8: warning: extra tokens at end of #endif directive

Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

move frv docs one level up

My first guess for "fujitsu" was it might be related to the
fujitsu-laptop.c driver...

Move the frv directory one level up since frv is the name of the
architecture in the Linux kernel.

Signed-off-by: Adrian Bunk <bunk@kernel.org>

remove Documentation/smp.txt

After seeing the filename I'd have expected something about the
implementation of SMP in the Linux kernel - not some notes on kernel
configuration and building trivialities noone would search at this
place.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alan Cox <alan@redhat.com>

Spelling fixes: lenght->length

Signed-off-by: Paulius Zaleckas <pauliusz@yahoo.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

Documentation:  Clarify when module debugging actually works.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

Documentation:  Remove references to dead "st0x" and "tmc8xx" parms.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

Documentation:  Update to refer to correct "rcupdate" module name

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

Documentation:  "decnet=" should read "decnet.addr=".

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

Typoes:  "whith" -> "with"

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

Fix a small number of "memeber" typoes.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

linux/dma-mapping.h: rename macro to prevent multiple inclusion

Having the macro to prevent multiple inclusion of
include/linux/dma-mapping.h contain the prefix "_ASM" is just begging
for possible confusion some day.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

Correct explanations of "find_next" bit routines.

Correct the obvious "copy and paste" errors explaining some of the
"find_next" routines.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

fix typo 'the same the\>'

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

SERIAL_NETX_CONSOLE provides console for NetX, not IMX

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

use the newc archive format as requested by initramfs

This is a documentation followup to 2e591bbc0d563e12f5a260fbbca0df7d5810910e

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

Documentation: fix type error

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

Coding style fix drivers/serial/icom.h

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

remove obsolete contact information from CREDITS

Signed-off-by: Adrian Bunk <bunk@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (95 commits)
  ide-tape: remove idetape_config_t typedef
  ide-tape: remove mtio.h related comments
  ide-tape: make function name more accurate
  ide-tape: remove unused sense packet commands.
  ide-tape: use generic byteorder macros
  ide-tape: remove EXPERIMENTAL driver status
  ide-tape: use generic scsi commands
  ide-tape: remove struct idetape_block_size_page_t
  ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t
  ide-tape: remove struct idetape_parameter_block_descriptor_t
  ide-tape: remove struct idetape_medium_partition_page_t
  ide-tape: remove struct idetape_data_compression_page_t
  ide-tape: remove struct idetape_inquiry_result_t
  ide-tape: remove struct idetape_capabilities_page_t
  ide-tape: remove IDETAPE_DEBUG_BUGS
  ide-tape: remove IDETAPE_DEBUG_INFO
  ide-tape: dump gcw fields on error in idetape_identify_device()
  ide-tape: remove struct idetape_mode_parameter_header_t
  ide-tape: remove struct idetape_request_sense_result_t
  ide-tape: remove dead code
  ...

fix writev regression: pan hanging unkillable and un-straceable

Frederik Himpe reported an unkillable and un-straceable pan process.

Zero length iovecs can go into an infinite loop in writev, because the
iovec iterator does not always advance over them.

The sequence required to trigger this is not trivial. I think it
requires that a zero-length iovec be followed by a non-zero-length iovec
which causes a pagefault in the atomic usercopy. This causes the writev
code to drop back into single-segment copy mode, which then tries to
copy the 0 bytes of the zero-length iovec; a zero length copy looks like
a failure though, so it loops.

Put a test into iov_iter_advance to catch zero-length iovecs. We could
just put the test in the fallback path, but I feel it is more robust to
skip over zero-length iovecs throughout the code (iovec iterator may be
used in filesystems too, so it should be robust).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: sbp2: fix bogus s/g access change

ide-tape: remove idetape_config_t typedef

Since this is used only in idetape_blkdev_ioctl(), remove the typedef and make
the struct function-local.

Bart:
- s/sizeof(struct idetape_config)/sizeof(config)/

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove mtio.h related comments

Those are already in mtio.h.

Bart:
- undo 'unsigned int/unsigned long' -> 'uint/ulong' conversion

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: make function name more accurate

idetape_active_next_stage() was rather ambiguous wrt its purpose. Make that
more explicit and remove superfluous comment.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove unused sense packet commands.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: use generic byteorder macros

This is not a network driver.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove EXPERIMENTAL driver status

ide-tape has depended on EXPERIMENTAL for ages. Change that since the driver is
being only maintained now.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: use generic scsi commands

Also, remove those which weren't used.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove struct idetape_block_size_page_t

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t

They seem just to sit there completely unused.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove struct idetape_parameter_block_descriptor_t

Also, shorten function name idetape_get_blocksize_from_block_descriptor() and
move its definition up thereby getting rid of its forward declaration.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove struct idetape_medium_partition_page_t

There should be no functional changes resulting from this patch.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove struct idetape_data_compression_page_t

There should be no functional changes resulting from this patch.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove struct idetape_inquiry_result_t

There should be no functional changes resulting from this patch.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove struct idetape_capabilities_page_t

All those 2-byte values denoting the different capabilities are being written to
the local copy of the caps buffer without being converted to big endian for
simplicity of usage and shorter code later.  Also, we add some comments stating
which are the fields of the caps page in question in order to alleviate the
cryptic pointer casting exercises as in e.g. idetape_get_mode_sense_results().

There should be no functional changes resulting from this patch.

Bart:
- remove two needless "!!"

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove IDETAPE_DEBUG_BUGS

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove IDETAPE_DEBUG_INFO

The device capabilities are probed for during device initialization so this
info is available through proc/ioctl() und it is redundant here.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: dump gcw fields on error in idetape_identify_device()

Cc: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove struct idetape_mode_parameter_header_t

Bart:
- remove 'capabilities->speed' chunk
- re-add brackets to block_descrp assignment

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove struct idetape_request_sense_result_t

Bart:
- remove unnecessary comment change
- remove two needless "!!"

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: remove dead code

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: move historical changelog to Documentation/ide/ChangeLog.ide-tape.1995-2002

Also, cleanup whitespace and update comments.

Bart:
- remove reference to drivers/block/ide.c
- move driver documentation to Documentation/ide/ide-tape.txt

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-cs: use ide_std_init_ports()

No reason to use ide_init_hwif_ports() in ide-cs (as a nice side-effect
this makes ide-cs work on archs that don't define IDE_ARCH_OBSOLETE_INIT).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: move check_dma_crc() to ide-dma.c

* Move check_dma_crc() to ide-dma.c and add inline version for
  CONFIG_BLK_DEV_IDEDMA=n case.

* Rename check_dma_crc() to ide_check_dma_crc().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: remove ide_auto_reduce_xfer()

While at it:

* Remove needless '!drive->crc_count' check.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: move drive->crc_count check out from check_dma_crc()

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: remove ide_ata66_check()

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: remove set_transfer()

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: unexport SELECT_DRIVE()

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-scsi: remove needless SELECT_DRIVE() call

SELECT_DRIVE() is called by IDE core code in start_request() before device
driver's ->do_request method.  In ide-scsi case ->do_request is implemented
by idescsi_do_request() which is also the only user of idescsi_issue_pc().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: use __ide_set_handler() in ide_execute_command()

* Use __ide_set_handler() in ide_execute_command().

While at it:

* Fix whitespace damage in ide_execute_command().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: remove SATA_*_REG macros

* siimage.c: use hwif->sata_scr[SATA_{ERROR,STATUS}_OFFSET] instead of
  SATA_{ERROR,STATUS}_REG macros.

* Remove no longer needed SATA_*_REG macros.

While at it:

* Remove needless SATA Status register read from sil_sata_reset_poll().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: remove ->nice0 and ->nice2 fields from ide_drive_t

* ->nice0 and ->nice2 ide_drive_t fields are always zero so remove them.

* IDE_NICE_0 and IDE_NICE_2 defines from <linux/hdreg.h> are no longer
  used by any kernel code so cover them with #ifndef/#endif __KERNEL__.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: convert ->straight8 field in ide_hwif_t to bit flag

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: remove unused ->auto_poll field from ide_hwif_t

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-probe: remove needless Status register reads

* Cache value read from the Status register in 'stat' variable in do_probe()
  and enable_nest(), then remove remove needless Status register reads.

While at it:

* Add proper KERN_* levels to printk() calls.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-cris: use ide_execute_command()

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

trm290: use ide_execute_command()

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-scsi: use ide_execute_command()

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-tape: use ide_execute_command()

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: move create_proc_ide_drives() call to ide_device_add_all()

* Un-static create_proc_ide_drives() and call it from ide_device_add_all().

While at it:
* Rename create_proc_ide_drives() to ide_proc_port_register_devices().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: move hwif->present check out from ide_proc_register_port()

Move hwif->present check out from ide_proc_register_port() to
ide_device_add_all().

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: factor out devices setup from ide_acpi_init()

* Factor out devices setup from ide_acpi_init() to
  ide_acpi_port_init_devices().

* Call ide_acpi_port_init_devices() in ide_device_add_all().

While at it:
* Remove no longer needed 'drive' field from struct ide_acpi_drive_link.

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-acpi: remove dead code from do_drive_get_GTF()

These pointers are always setup in ide_acpi_init().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-acpi: remove needless exports

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: move ide_acpi_init() call to ide_device_add_all()

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: factor out devices setup from init_irq()

* Factor out devices setup from init_irq() to ide_port_setup_devices().

While at it:
* Do devices setup after printing port information.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: factor out adding drive to hwgroup from init_irq()

Factor out adding drive to hwgroup from init_irq() to
ide_add_drive_to_hwgroup().

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: move hwif->rqsize init from ide_init_queue() to init_irq()

Move hwif->rqsize init from ide_init_queue() to init_irq().

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: merge init_gendisk() into hwif_register_devices()

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: call init_gendisk() after ide_acpi_init()

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: move blk_register_region() call out from init_gendisk()

Move blk_register_region() call out from init_gendisk() to hwif_init().

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: skip not present devices in init_gendisk()

No need to initialize drive->gendev and waste memory on IDE settings
for not present devices.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>