Alexey Dobriyan [Sat, 30 Aug 2008 02:03:34 +0000 (06:03 +0400)]
x86: make setup_xstate_init() __init
WARNING: vmlinux.o(.text+0x22453): Section mismatch in reference from the function setup_xstate_init() to the function .init.text:__alloc_bootmem()
The function setup_xstate_init() references the function __init __alloc_bootmem().
This is often because setup_xstate_init lacks a __init annotation or the annotation of __alloc_bootmem is wrong.
H. Peter Anvin [Thu, 28 Aug 2008 05:05:45 +0000 (22:05 -0700)]
x86: cpufeature: fix SMX flag
Impact: "smx" flags showed as "safer" in /proc/cpuinfo
The SMX feature flag is the so-called "safer mode"... I had put that
in quotes, but that flagged it as a cpuinfo flag name. Remove the
quotes to correct the flag name in /proc/cpuinfo.
H. Peter Anvin [Thu, 28 Aug 2008 01:53:07 +0000 (18:53 -0700)]
x86: cpufeature: add Intel features from CPUID and AVX specs
Add all Intel CPUID features currently documented in the CPUID spec
(AP-485, 241618-032, Dec 2007) and the AVX Programming Reference
(319433-003, Aug 2008).
H. Peter Anvin [Thu, 28 Aug 2008 00:56:44 +0000 (17:56 -0700)]
x86: generate names for /proc/cpuinfo from <asm/cpufeature.h>
We have had a number of cases where <asm/cpufeature.h> (and its
predecessors) have diverged substantially from the names list in
/proc/cpuinfo. This patch generates the latter from the former.
It retains the option for explicitly overriding the strings, but by
making that require a separate action it should at least be less
likely to happen.
It would be good to do a future pass and rename strings that are
gratuituously different in the kernel (/proc/cpuinfo is a userspace
interface and must remain constant.)
H. Peter Anvin [Mon, 25 Aug 2008 22:06:35 +0000 (15:06 -0700)]
x86: update defconfigs
Enable some option commonly used by testers in defconfig, including
some very common device drivers and network boot support. defconfig
is still not meant to be a kitchen-sink configuration.
H. Peter Anvin [Tue, 26 Aug 2008 05:39:15 +0000 (22:39 -0700)]
x86: msr: fix bogus return values from rdmsr_safe/wrmsr_safe
Impact: bogus error codes (+other?) on x86-64
The rdmsr_safe/wrmsr_safe routines have macros for the handling of the
edx:eax arguments. Those macros take a variable number of assembly
arguments. This is rather inherently incompatible with using
%digit-style escapes in the inline assembly; replace those with
%[name]-style escapes.
This fixes miscompilation on x86-64, which at the very least caused
bogus return values. It is possible that this could also corrupt the
return value; I am not sure.
H. Peter Anvin [Tue, 26 Aug 2008 00:35:25 +0000 (17:35 -0700)]
x86: cpuid: correct return value on partial operations
Return the correct return value when the CPUID driver partially
completes a request (we should return the number of bytes actually
read or written, instead of the error code.)
H. Peter Anvin [Tue, 26 Aug 2008 00:34:27 +0000 (17:34 -0700)]
x86: msr: correct return value on partial operations
Return the correct return value when the MSR driver partially
completes a request (we should return the number of bytes actually
read or written, instead of the error code.)
H. Peter Anvin [Tue, 26 Aug 2008 00:07:14 +0000 (17:07 -0700)]
smp: have smp_call_function_single() detect invalid CPUs
Have smp_call_function_single() return invalid CPU indicies and return
-ENXIO. This function is already executed inside a
get_cpu()..put_cpu() which locks out CPU removal, so rather than
having the higher layers doing another layer of locking to guard
against unplugged CPUs do the test here.
Yinghai Lu [Mon, 25 Aug 2008 07:56:08 +0000 (00:56 -0700)]
x86: fix HPET regression in 2.6.26 versus 2.6.25, check hpet against BAR, v3
David Witbrodt tracked down (and bisected) a hpet bootup hang on his
system to the following problem: a BIOS bug made the hpet device
visible as a generic PCI device. If e820 reserved entries happen to
be registered first in the resource tree [which v2.6.26 started doing],
then the PCI code will reallocate that device's BAR to some other
address - breaking timer IRQs and hanging the system.
( Normally hpet devices are hidden by the BIOS from the OS's PCI
discovery via chipset magic. Sometimes the hpet is not a PCI device
at all. )
Solve this fundamental fragility by making non-PCI platform drivers
insert resources into the resource tree even if it overlaps the e820
reserved entry, to keep the resource manager from updating the BAR.
Also do these checks for the ioapic and mmconfig addresses, and emit
a warning if this happens.
Bisected-by: David Witbrodt <dawitbro@sbcglobal.net> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Tested-by: David Witbrodt <dawitbro@sbcglobal.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Arjan van de Ven [Sun, 24 Aug 2008 04:45:21 +0000 (21:45 -0700)]
Fix oops in acer_wmi driver (acer_wmi_init)
The acer_wmi driver does a DMI scan for quirks, and then sets flags into the
"interface" datastructure for some cases. However, the quirks happen real early
before "interface" is per se initialized from NULL.
The patch below 1) adds a NULL pointer check and 2) (re)runs the quirks at the
end, when "interface" has it's final value.
Reported-by: kerneloops.org Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk> CC: stable@vger.kernel.org Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
ipv6: protocol for address routes
icmp: icmp_sk() should not use smp_processor_id() in preemptible code
pkt_sched: Fix qdisc list locking
pkt_sched: Fix qdisc_watchdog() vs. dev_deactivate() race
sctp: fix potential panics in the SCTP-AUTH API.
x86 MCE: Fix CPU hotplug problem with multiple multicore AMD CPUs
During CPU hot-remove the sysfs directory created by
threshold_create_bank(), defined in
arch/x86/kernel/cpu/mcheck/mce_amd_64.c, has to be removed before
its parent directory, created by mce_create_device(), defined in
arch/x86/kernel/cpu/mcheck/mce_64.c . Moreover, when the CPU in
question is hotplugged again, obviously the latter has to be created
before the former. At present, the right ordering is not enforced,
because all of these operations are carried out by CPU hotplug
notifiers which are not appropriately ordered with respect to each
other. This leads to serious problems on systems with two or more
multicore AMD CPUs, among other things during suspend and hibernation.
Fix the problem by placing threshold bank CPU hotplug callbacks in
mce_cpu_callback(), so that they are invoked at the right places,
if defined. Additionally, use kobject_del() to remove the sysfs
directory associated with the kobject created by
kobject_create_and_add() in threshold_create_bank(), to prevent the
kernel from crashing during CPU hotplug operations on systems with
two or more multicore AMD CPUs.
This patch fixes bug #11337.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Andi Kleen <andi@firstfloor.org> Tested-by: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Robert Richter [Fri, 22 Aug 2008 18:23:37 +0000 (20:23 +0200)]
x86: fix: do not run code in amd_bus.c on non-AMD CPUs
Jan Beulich wrote:
> Even worse - this would even try to access the MSR on non-AMD CPUs
> (currently probably prevented just by the fact that only AMD ones use
> family values of 0x10 or higher).
This patch adds cpu vendor check to the postcore_initcalls.
Reported-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
This fixes a problem spotted with zebra, but not sure if it is
necessary a kernel problem. With IPV6 when an address is added to an
interface, Zebra creates a duplicate RIB entry, one as a connected
route, and other as a kernel route.
When an address is added to an interface the RTN_NEWADDR message
causes Zebra to create a connected route. In IPV4 when an address is
added to an interface a RTN_NEWROUTE message is set to user space with
the protocol RTPROT_KERNEL. Zebra ignores these messages, because it
already has the connected route.
The problem is that route created in IPV6 has route protocol ==
RTPROT_BOOT. Was this a design decision or a bug? This fixes it. Same
patch applies to both net-2.6 and stable.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
BUG: using smp_processor_id() in preemptible [00000000] code: tracepath/3205
caller is icmp_sk+0x15/0x30
Pid: 3205, comm: tracepath Not tainted 2.6.27-rc4 #1
Linus Torvalds [Fri, 22 Aug 2008 15:37:07 +0000 (08:37 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Update documentation to remind users to update mke2fs.conf
ext4: Fix small file fragmentation
ext4: Initialize writeback_index to 0 when allocating a new inode
ext4: make sure ext4_has_free_blocks returns 0 for ENOSPC
ext4: journal credit fix for the delayed allocation's writepages() function
ext4: Rework the ext4_da_writepages() function
ext4: journal credits reservation fixes for DIO, fallocate
ext4: journal credits reservation fixes for extent file writepage
ext4: journal credits calulation cleanup and fix for non-extent writepage
ext4: Fix bug where we return ENOSPC even though we have plenty of inodes
ext4: don't try to resize if there are no reserved gdt blocks left
ext4: Use ext4_discard_reservations instead of mballoc-specific call
ext4: Fix ext4_dx_readdir hash collision handling
ext4: Fix delalloc release block reservation for truncate
ext4: Fix potential truncate BUG due to i_prealloc_list being non-empty
ext4: Handle unwritten extent properly with delayed allocation
Linus Torvalds [Fri, 22 Aug 2008 15:36:20 +0000 (08:36 -0700)]
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
nohz: fix wrong event handler after online an offlined cpu
Linus Torvalds [Fri, 22 Aug 2008 15:23:53 +0000 (08:23 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: work around MTRR mask setting, v2
x86: fix section mismatch warning - uv_cpu_init
x86: fix VMI for early params
x86: fix two modpost warnings in mm/init_64.c
x86: fix 1:1 mapping init on 64-bit (memory hotplug case)
x86: work around MTRR mask setting
x86: PAT Update validate_pat_support for intel CPUs
devmem, x86: PAT Change /dev/mem mmap with O_SYNC to use UC_MINUS
x86: PAT proper tracking of set_memory_uc and friends
x86: fix BUG: unable to handle kernel paging request (numaq_tsc_disable)
x86: export pv_lock_ops non-GPL
x86, mmiotrace: silence section mismatch warning - leave_uniprocessor
x86: use WARN() in arch/x86/kernel
x86: use WARN() in arch/x86/mm/ioremap.c
werror: fix pci calgary
x86: fix oprofile + hibernation badness
x86, SGI UV: hardcode the TLB flush interrupt system vector
x86: fix Xorg startup/shutdown slowdown with PAT
x86: fix "kernel won't boot on a Cyrix MediaGXm (Geode)"
x86 iommu: remove unneeded parenthesis
Linus Torvalds [Fri, 22 Aug 2008 15:22:33 +0000 (08:22 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
[libata] pata_it821x: fix warning
libata: Fix a large collection of DMA mode mismatches
ahci: sis controllers actually can do PMP
pata_via: clean up recent tf_load changes
libata: restore SControl on detach
libata: use ata_link_printk() when printing SError
libata: always do follow-up SRST if hardreset returned -EAGAIN
libata: fix EH action overwriting in ata_eh_reset()
sata_mv: add the Gen IIE flag to the SoC devices.
ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs
ahci: RAID mode SATA patch for Intel Ibex Peak DeviceIDs
sata_mv: don't issue two DMA commands concurrently
libata: implement no[hs]rst force params
Linus Torvalds [Fri, 22 Aug 2008 15:21:48 +0000 (08:21 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IPoIB: Fix deadlock on RTNL in ipoib_stop()
IB/ipath: Fix incorrect check for max physical address in TID
IB/ipath: Fix lost UD send work request
Herbert Xu [Fri, 22 Aug 2008 15:04:06 +0000 (01:04 +1000)]
crypto: authenc - Avoid using clobbered request pointer
Authenc works in two stages for encryption, it first encrypts and
then computes an ICV. The context memory of the request is used
by both operations. The problem is that when an asynchronous
encryption completes, we will compute the ICV and then reread the
context memory of the encryption to get the original request.
It just happens that we have a buffer of 16 bytes in front of the
request pointer, so ICVs of 16 bytes (such as SHA1) do not trigger
the bug. However, any attempt to uses a larger ICV instantly kills
the machine when the first asynchronous encryption is completed.
This patch fixes this by saving the request pointer before we start
the ICV computation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Takashi Iwai [Fri, 22 Aug 2008 13:24:22 +0000 (15:24 +0200)]
ALSA: hda - Fix call of alc888_coef_init()
Using init_hook to call alc888_coef_init() is problematic for configurations
that already set another init_hook. Better to put it in alc_init() as is
(although it looks a bit hackish).
Marcin Slusarz [Thu, 21 Aug 2008 18:49:05 +0000 (20:49 +0200)]
x86: fix section mismatch warning - uv_cpu_init
WARNING: vmlinux.o(.cpuinit.text+0x3cc4): Section mismatch in reference from the function uv_cpu_init() to the function .init.text:uv_system_init()
The function __cpuinit uv_cpu_init() references
a function __init uv_system_init().
If uv_system_init is only used by uv_cpu_init then
annotate uv_system_init with a matching annotation.
uv_system_init was ment to be called only once, so do it from codepath
(native_smp_prepare_cpus) which is called once, right before activation
of other cpus (smp_init).
Note: old code relied on uv_node_to_blade being initialized to 0,
but it'a not initialized from anywhere.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jarek Poplawski [Fri, 22 Aug 2008 10:24:05 +0000 (03:24 -0700)]
pkt_sched: Fix qdisc list locking
Since some qdiscs call qdisc_tree_decrease_qlen() (so qdisc_lookup())
without rtnl_lock(), adding and deleting from a qdisc list needs
additional locking. This patch adds global spinlock qdisc_list_lock
and wrapper functions for modifying the list. It is considered as a
temporary solution until hfsc_dequeue(), netem_dequeue() and
tbf_dequeue() (or qdisc_tree_decrease_qlen()) are redone.
With feedback from Herbert Xu and David S. Miller.
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Garzik [Fri, 22 Aug 2008 06:33:23 +0000 (02:33 -0400)]
[libata] pata_it821x: fix warning
Reported by Andrew Morton:
drivers/ata/pata_it821x.c: In function 'it821x_port_start':
drivers/ata/pata_it821x.c:609: warning: 'mtype' may be used uninitialized in
this function
Alan Cox [Fri, 1 Aug 2008 08:18:34 +0000 (09:18 +0100)]
libata: Fix a large collection of DMA mode mismatches
Dave Müller sent a diff for the pata_oldpiix that highlighted a problem
where a lot of the ATA drivers assume dma_mode == 0 means "no DMA" while
the core code uses 0xFF.
This turns out to have other consequences such as code doing >= XFER_UDMA_0
also catching 0xFF as UDMAlots. Fortunately it doesn't generally affect
set_dma_mode, although some drivers call back into their own set mode code
from other points.
Having been through the drivers I've added helpers for using_udma/using_mwdma
dma_enabled so that people don't open code ranges that may change (eg if UDMA8
appears somewhere)
Thanks to David for the initial bits
[and added fix for pata_oldpiix from and signed-off-by Dave Mueller
<dave.mueller@gmx.ch> -jg]
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Fri, 1 Aug 2008 03:51:43 +0000 (12:51 +0900)]
ahci: sis controllers actually can do PMP
SIS controllers were blacklisted for PMP as enabling it made device
detection fail whether the device was PMP or not - the natural
conclusion was the controller chokes on SRST w/ pmp==15. However, it
turned out that the controller just didn't like issuing SRST after
hardreset w/o clearing SError first. Interestingly, the SRST itself
succeeds but the following commands fail.
If SError is cleared between hardreset and SRST, which is the default
behavior now, everything works fine and SIS controllers work with PMPs
happily.
Remove PMP blacklisting for SIS AHCIs.
Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Piter PUNK <piterpunk@slackware.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Save SControl during probing and restore it on detach. This prevents
adjustments made by libata drivers to seep into the next driver which
gets attached (be it a libata one or not).
It's not clear whether SControl also needs to be restored on suspend.
The next system to have control (ACPI or kexec'd kernel) would
probably like to see the original SControl value but there's no
guarantee that a link is gonna keep working after SControl is adjusted
without a reset and adding a reset and modified recovery cycle soley
for this is an overkill. For now, do it only for detach.
Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
libata: always do follow-up SRST if hardreset returned -EAGAIN
As an optimization, follow-up SRST used to be skipped if
classification wasn't requested even when hardreset requested it via
-EAGAIN. However, some hardresets can't wait for device readiness and
skipping SRST can cause timeout or other failures during revalidation.
Always perform follow-up SRST if hardreset returns -EAGAIN. This
makes reset paths more predictable and thus less error-prone.
While at it, move hardreset error checking such that it's done right
after hardreset is finished. This simplifies followup SRST condition
check a bit and makes the reset path easier to modify.
Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
libata: fix EH action overwriting in ata_eh_reset()
ehc->i.action got accidentally overwritten to ATA_EH_HARD/SOFTRESET in
ata_eh_reset(). The original intention was to clear reset action
which wasn't selected. This can cause unexpected behavior when other
EH actions are scheduled together with reset. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Wed, 13 Aug 2008 11:24:16 +0000 (20:24 +0900)]
sata_mv: don't issue two DMA commands concurrently
sata_mv allowed issuing two DMA commands concurrently which the
hardware allows. Unfortunately, libata core layer isn't ready for
this yet and spews ugly warning message and malfunctions on this.
Don't allow concurrent DMA commands for now.
Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Jan Beulich [Thu, 21 Aug 2008 13:27:22 +0000 (14:27 +0100)]
x86: fix 1:1 mapping init on 64-bit (memory hotplug case)
While I don't have a hotplug capable system at hand, I think two issues need
fixing:
- pud_phys (in kernel_physical_ampping_init()) would remain uninitialized in
the after_bootmem case
- the locking done just around phys_pmd_{init,update}() would leave out pgd
updates, and it was needlessly covering code portions that do allocations
(perhaps using a more friendly gfp value in alloc_low_page() would then be
possible)
Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yinghai Lu [Fri, 22 Aug 2008 03:24:24 +0000 (20:24 -0700)]
x86: work around MTRR mask setting
Joshua Hoblitt reported that only 3 GB of his 16 GB of RAM is
usable. Booting with mtrr_show showed us the BIOS-initialized
MTRR settings - which are all wrong.
So the root cause is that the BIOS has not set the mask correctly:
Linus Torvalds [Thu, 21 Aug 2008 23:31:08 +0000 (16:31 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 5212/1: pxa: fix build error when CPU_PXA310 is not defined
[ARM] 5208/1: fsg-setup.c fixes
[ARM] fix impd1.c build warning
[ARM] e400 config use MFP
[ARM] e740 config use MFP
[ARM] Fix eseries IRQ limit
[ARM] clocklib: Update users of aliases to new API
[ARM] clocklib: Allow dynamic alias creation
[ARM] eseries: whitespace fixes and cleanup
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
pnp: fix "add acpi:* modalias entries"
UIO: generic irq handling for some uio platform devices
UIO: uio_pdrv: fix license specification
UIO: uio_pdrv: fix memory leak
block: drop references taken by class_find_device()
block: fix partial read() of /proc/{partitions,diskstats}
PM: Remove WARN_ON from device_pm_add
driver core: add init_name to struct device
PM: don't skip device PM init when CONFIG_PM_SLEEP isn't set and CONFIG_PM is set
driver model: anti-oopsing medicine
dev_printk(): constify the `dev' argument
drivers/base/driver.c: remove unused to_dev() macro
Documentation: HOWTO-ja_JP-sync patch
Japanese translation of Documentation/SubmitChecklist
kobject: Replace ALL occurrences of '/' with '!' instead of only the first one.
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp.
USB: automatically enable RHSC interrupts
USB: Don't rebind before "complete" callback
USB: Add new PM callback methods for USB
USB: Defer Set-Interface for suspended devices
USB: Add udev argument to interface suspend/resume functions
USB: cdc-acm: don't unlock acm->mutex on error path
MUSB: Fix index register corruption seen with g_ether and Windows host
usb: musb: get rid of MUSB_LOGLEVEL and use parameter
usb: musb: get rid of procfs entry
USB: Fix pxa27x_udc usb speed handling.
USB: cdc-acm: quirk for Conexant CX93010 USB modem
USB: fix bug in usb_unlink_anchored_urbs()
usb-serial: option support HSDPA modem A2502
USB: ISP1760: fixed trivial math in comment
Gerald Schaefer [Thu, 21 Aug 2008 17:46:40 +0000 (19:46 +0200)]
[S390] dcssblk: fix race in dcssblk_add_store()
Concurrently adding the same segment may lead to duplicate device_register()
calls, which will trigger an error in kobject code:
"... don't try to register things with the same name in the same directory".
This patch adds a check to avoid this.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[S390] cio: call ccw driver notify function with lock held
Calling a ccw driver's notify function without the ccw device lock
held opens up a race window between discovery and handling of a change
in the device operational state. As a result, the device driver may
encounter unexpected device malfunction, leading to out-of-retry
situations or similar.
Remove race by extending the ccw device lock from state change
discovery to the calling of the notify function.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stefan Weinhuber [Thu, 21 Aug 2008 17:46:38 +0000 (19:46 +0200)]
[S390] dasd: fix data size for PSF/PRSSD command
The Perform Subsystem Function/Prepare for Read Subsystem Data
command requires 12 bytes of parameter data, but the respective data
structure dasd_psf_prssd_data has a length of 16 bytes.
Current storage servers ignore the obsolete bytes, but older models
fail to execute the command and report an incorrect length error.
This causes the device initilization for these devices to fail.
To fix this problem we need to correct the dasd_psf_prssd_data
structure and shorten it to the correct length.
Reported-by: Ivan Warren <ivan@vmfacility.fr> Reviewed-by: Ivan Warren <ivan@vmfacility.fr> Tested-by: Ivan Warren <ivan@vmfacility.fr> CC: stable <stable@kernel.org> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Eric Sandeen [Thu, 21 Aug 2008 17:46:37 +0000 (19:46 +0200)]
[S390] fix ext2_find_next_bit
ext4 does not work on s390 because ext2_find_next_bit is broken. Fortunately
this function is only used by ext4. The function uses ffs which does not work
analog to ffz. The result of ffs has an offset of 1 which is not taken into
account. To fix this use the low level __ffs_word function directly instead
of the ill defined ffs.
In addition the patch improves find_next_zero_bit and ext2_find_next_zero_bit
by passing the bit offset into __ffz_word instead of adding it after the
function call returned.
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Jan Glauber [Thu, 21 Aug 2008 17:46:35 +0000 (19:46 +0200)]
[S390] qdio: remove the module_get & module_put pair
Increasing the qdio reference count for every used subchannel
is unnecessary since unloading qdio (if build as a module) is
only possible if other modules that use qdio are unloaded.
Unloading modules that use qdio in turn requires that these
modules shut down all qdio subchannels. Therefore the additional
module_get reference is not needed.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Jan Glauber [Thu, 21 Aug 2008 17:46:34 +0000 (19:46 +0200)]
[S390] qdio: improve s390 debug feature usage
Improve s390 debug feature usage:
- log busy bit in dbf
- increase size of dbf views
- consistent logging of qdio api calls to setup view
- print subchannel number so one can associate the interface
with the dbf data
- only log events to one view
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Jan Glauber [Thu, 21 Aug 2008 17:46:33 +0000 (19:46 +0200)]
[S390] qdio: prevent oopsing if qdio_establish fails
If qdio_establish fails we call qdio_shutdown to cleanup the
qdio subchannel. The tiq_list entry may not be valid at that
time, therefore we must ignore queues with an invalid list entry
in tiqdio_remove_input_queues.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ever since commit 43ca5c3a1cefdaa09231d64485b8f676118bf1e0 ([S390] Convert
monitor calls to function calls.), the kernel refused to IPL with spinlock
debugging enabled.
Julien Brunel [Thu, 21 Aug 2008 17:46:30 +0000 (19:46 +0200)]
[S390] drivers/s390: Use an IS_ERR test rather than a NULL test
In case of error, functions dasd_kmalloc_request and idal_buffer_alloc
return an ERR pointer, but never return the NULL pointer. So after a
call to one of these functions, a NULL test should be replaced by an
IS_ERR test.
A simplified version of the semantic patch that makes this change is
as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@correct_null_test@
expression x,E;
statement S1, S2;
@@
x =
(
dasd_kmalloc_request(...)
|
idal_buffer_alloc(...)
)
<... when != x = E
if (
(
- x@p2 != NULL
+ ! IS_ERR ( x )
|
- x@p2 == NULL
+ IS_ERR( x )
)
)
S1
else S2
...>
? x = E;
// </smpl>
Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
USB: sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp.
sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp.
usb 1-2: new high speed USB device using ehci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: USB2VGA dongle found at address 4
usb 1-2: Allocated 8 output buffers
usb 1-2: 8MB 1 ch/1 r SDR SDRAM, bus width 32
usb 1-2: New USB device found, idVendor=0711, idProduct=0918
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Signed-off-by: Stefan Lippers-Hollmann <s.L-H@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Wed, 20 Aug 2008 21:22:05 +0000 (17:22 -0400)]
USB: automatically enable RHSC interrupts
This patch (as1069c) changes the way OHCI root-hub status-change
interrupts are enabled. Currently a special HCD method,
hub_irq_enable(), is called when the hub driver is finished using a
root hub. This approach turns out to be subject to races, resulting
in unnecessary polling.
The patch does away with the method entirely. Instead, the driver
automatically enables the RHSC interrupt when no more status changes
are present. This scheme is safe with controllers using
level-triggered semantics for their interrupt flags.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 12 Aug 2008 18:34:14 +0000 (14:34 -0400)]
USB: Don't rebind before "complete" callback
This patch (as1130) fixes an incompatibility between the new PM
infrastructure and USB power management. We are not allowed to call
drivers' probe routines during a system sleep transition between the
"prepare" and "complete" callbacks, but that's exactly what we do when
a driver doesn't have full suspend/resume support. Such drivers are
unbound during the "suspend" call and reprobed during the "resume" call.
The patch causes the reprobe step to be skipped if the "complete"
callback hasn't been issued yet, i.e., if the interface's
dev.power.status field is not equal to DPM_ON. Thus during the
"resume" callback nothing bad will happen, and during the final
"complete" callback the reprobing will occur as desired.
This fixes the problem reported in Bugzilla #11263.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 12 Aug 2008 18:34:10 +0000 (14:34 -0400)]
USB: Add new PM callback methods for USB
This patch (as1129) adds support for the new PM callbacks to usbcore.
The new callbacks merely invoke the same old USB power management
routines as the old ones did.
A minor improvement is that the callbacks are present only in the
"USB-device" device_type structure, rather than in the bus_type
structure. This way they will be invoked only for USB devices, not
for USB interfaces. The core USB PM routines automatically handle
suspending and resuming interfaces along with their devices.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 12 Aug 2008 18:33:59 +0000 (14:33 -0400)]
USB: Defer Set-Interface for suspended devices
This patch (as1128) fixes one of the problems related to the new PM
infrastructure. We are not allowed to register new child devices
during the middle of a system sleep transition, but unbinding a USB
driver causes the core to automatically install altsetting 0 and
thereby create new endpoint pseudo-devices.
The patch fixes this problem (and the related problem that installing
altsetting 0 will fail if the device is suspended) by deferring the
Set-Interface call until some later time when it is legal and can
succeed. Possible later times are: when a new driver is being probed
for the interface, and when the interface is being resumed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 12 Aug 2008 18:33:27 +0000 (14:33 -0400)]
USB: Add udev argument to interface suspend/resume functions
This patch (as1127) makes a minor change to the prototypes of the
usb_suspend_interface() and usb_resume_interface() routines. Now the
usb_device structure is passed as an argument, instead of being
computed on-the-fly from the usb_interface argument.
It makes the code look simpler, even if it really isn't much different
from before.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alexey Dobriyan [Wed, 20 Aug 2008 23:56:04 +0000 (16:56 -0700)]
USB: cdc-acm: don't unlock acm->mutex on error path
On Wed, Jul 23, 2008 at 03:52:36PM +0300, Andrei Popa wrote:
> I installed gnokii-0.6.22-r2 and gave the command "gnokii --identify"
> and the kernel oopsed:
>
> BUG: unable to handle kernel NULL pointer dereference at 00000458
> IP: [<c0444b52>] mutex_unlock+0x0/0xb
> [<c03830ae>] acm_tty_open+0x4c/0x214
Anand Gadiyar [Thu, 21 Aug 2008 14:51:00 +0000 (20:21 +0530)]
MUSB: Fix index register corruption seen with g_ether and Windows host
If Indexed Mode register accesses are enabled, the ep0_rxstate()
function calls musb_g_ep0_giveback() before writing to the CSR
register. When control returns to this ep0_rxstate, the index
register contents are over-written. This causes the CSR register
write to fail.
Fixed by writing the correct value into the index register before
writing to the CSR.
This was observed only in ep0_rxstate() with g_ether loaded and
the device connected to a MS Windows host PC. Anticipatively fixed
ep0_txstate() as well.
Robert Jarzmik [Mon, 11 Aug 2008 16:28:13 +0000 (18:28 +0200)]
USB: Fix pxa27x_udc usb speed handling.
The new composite framework revealed a weakness in the
pxa27x_udc driver gadget register function. Instead of
checking if speed asked for was USB_LOW_SPEED upon
usb_gadget_register() to deny service, it checked only
for USB_FULL_SPEED, thus denying service to usb high
speed capable gadgets (like g_ether).
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eric Sandeen [Thu, 14 Aug 2008 13:25:40 +0000 (08:25 -0500)]
USB: cdc-acm: quirk for Conexant CX93010 USB modem
This patch gets my Rosewill RNX-56USB USB modem (with Conexant CX93010
chipset) up and running to the point where I can send AT commands and
retrieve caller ID data, which is all I want to do with it.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hiroshi Miura [Tue, 19 Aug 2008 08:58:25 +0000 (10:58 +0200)]
usb-serial: option support HSDPA modem A2502
This patch support NTT DoCoMo A2502 3G/HSDPA modem on option driver.
It is produced by AnyDATA Corp. and also sold as KT Freetelecom (Korea) ADU 620UW.
It support 3.6Mbps/7.2Mbps hight speed communication.
I have tested A2502 with NTT DoCoMo MoperaU ISP service.
Magnus Damm [Fri, 11 Jul 2008 09:55:27 +0000 (18:55 +0900)]
UIO: generic irq handling for some uio platform devices
This is V3 of uio_pdrv_genirq.c, a platform driver for UIO with
generic IRQ handling code. This driver is very similar to the regular
UIO platform driver, but is only suitable for devices that are
connected to the interrupt controller using unique interrupt lines.
The uio_pdrv_genirq driver includes generic interrupt handling code
which disables the serviced interrupt in the interrupt controller
and makes the user space driver responsible for acknowledging the
interrupt in the device and reenabling the interrupt in the interrupt
controller.
Shared interrupts are not supported since the in-kernel interrupt
handler will disable the interrupt line in the interrupt controller,
and in a shared interrupt configuration this will stop other devices
from delivering interrupts.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kay Sievers [Sat, 16 Aug 2008 12:30:30 +0000 (14:30 +0200)]
block: fix partial read() of /proc/{partitions,diskstats}
The proc files get truncated if they do not fit into the buffer with
a single read(). We need to move the seq_file index from the callback
of class_find_device() to the caller of class_find_device(), to keep
its value across multiple invocations of the callback.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix message in device_pm_add() saying that the device will not be
added to dpm_list, although in fact the device is going to be added
to the list regardless of the ordering violation.
Remove the WARN_ON(true) triggered in that situation, because it is
hit by USB very often and spams the users' logs.
This patch fixes bug #11263
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Thu, 7 Aug 2008 17:06:12 +0000 (13:06 -0400)]
PM: don't skip device PM init when CONFIG_PM_SLEEP isn't set and CONFIG_PM is set
This patch (as1124) fixes a couple of bugs in the PM core. The new
dev->power.status field should be initialized regardless of whether
CONFIG_PM_SLEEP is enabled, and similarly dpm_sysfs_add() should be
called whenever CONFIG_PM is enabled.
The patch separates out the call to dpm_sysfs_add() from the call to
device_pm_add(). As a result device_pm_add() can no longer return an
error, so its return type is changed to void.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Romit Dasgupta <romit@ti.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / linux-2.6-omap-h63xx.git / log