]> pilppa.com Git - linux-2.6-omap-h63xx.git/log
linux-2.6-omap-h63xx.git
16 years agoupdate the BLK_DEV_HD help text
Adrian Bunk [Wed, 16 Jul 2008 18:33:47 +0000 (20:33 +0200)]
update the BLK_DEV_HD help text

Many people will see this option the first time now that it is in
drivers/block/

Make it clear that virtually noone needs it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: rmk@arm.linux.org.uk
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agomove ide/legacy/hd.c to drivers/block/
Adrian Bunk [Wed, 16 Jul 2008 18:33:47 +0000 (20:33 +0200)]
move ide/legacy/hd.c to drivers/block/

This patch moves hd.c to drivers/block/

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: rmk@arm.linux.org.uk
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide/legacy/hd.c: use late_initcall()
Adrian Bunk [Wed, 16 Jul 2008 18:33:47 +0000 (20:33 +0200)]
ide/legacy/hd.c: use late_initcall()

Since the later move to drivers/block/ will break the link order,
the module_init() has to become a late_initcall().

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: rmk@arm.linux.org.uk
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoremove BLK_DEV_HD_ONLY
Adrian Bunk [Wed, 16 Jul 2008 18:33:47 +0000 (20:33 +0200)]
remove BLK_DEV_HD_ONLY

After commit 80aa31cb460d12c1e02327b43eceb3eebc6e7090
(ide: remove CONFIG_BLK_DEV_HD_IDE config option (take 2))
the indirection through BLK_DEV_HD_ONLY is no longer required.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: rmk@arm.linux.org.uk
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: endian annotations in ide-floppy.c
Harvey Harrison [Wed, 16 Jul 2008 18:33:47 +0000 (20:33 +0200)]
ide: endian annotations in ide-floppy.c

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-floppy: zero out the whole struct ide_atapi_pc on init
Borislav Petkov [Wed, 16 Jul 2008 18:33:47 +0000 (20:33 +0200)]
ide-floppy: zero out the whole struct ide_atapi_pc on init

This is a precaution just to make sure a new pc is clean when allocated.

There should be no functional change introduced by this patch.

[bart: ported it over IDE changes]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-floppy: fold idefloppy_create_test_unit_ready_cmd into idefloppy_open
Borislav Petkov [Wed, 16 Jul 2008 18:33:46 +0000 (20:33 +0200)]
ide-floppy: fold idefloppy_create_test_unit_ready_cmd into idefloppy_open

There's no need for this function since it is used only once.

[bart: ported it over IDE changes]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: move request prep chunk from cdrom_do_newpc_cont to rq issue path
Borislav Petkov [Wed, 16 Jul 2008 18:33:46 +0000 (20:33 +0200)]
ide-cd: move request prep chunk from cdrom_do_newpc_cont to rq issue path

As a nice side effect, this minimizes the IRQ handler execution time.

There should be no functionality change resulting from this patch.

[bart: remove extra newlines from ide_cd_do_request()]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: move request prep from cdrom_start_rw_cont to rq issue path
Borislav Petkov [Wed, 16 Jul 2008 18:33:46 +0000 (20:33 +0200)]
ide-cd: move request prep from cdrom_start_rw_cont to rq issue path

... by factoring out the rq preparation code into a separate
function called in the request routine.  As a nice side effect,
this minimizes the IRQ handler execution time.

There should be no functionality change resulting from this patch.

[bart: s/HWGROUP()/drive->hwif->hwgroup/ and remove extra newline]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: move request prep from cdrom_start_seek_continuation to rq issue path
Borislav Petkov [Wed, 16 Jul 2008 18:33:46 +0000 (20:33 +0200)]
ide-cd: move request prep from cdrom_start_seek_continuation to rq issue path

... by factoring out the rq preparation code into a separate
function called in the request routine.  As a nice side effect,
this minimizes the IRQ handler execution time.

There should be no functionality change resulting from this patch.

[bart: s/HWGROUP()/drive->hwif->hwgroup/ and remove extra newlines]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: fold cdrom_start_seek into ide_cd_do_request
Borislav Petkov [Wed, 16 Jul 2008 18:33:46 +0000 (20:33 +0200)]
ide-cd: fold cdrom_start_seek into ide_cd_do_request

Do what the compiler does anyway: inline a function that is used only once.

This saves us the overhead of a function call and the function is small enough
to be embedded in the callsite anyways.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: simplify request issuing path
Borislav Petkov [Wed, 16 Jul 2008 18:33:46 +0000 (20:33 +0200)]
ide-cd: simplify request issuing path

Call cdrom_start_packet_command() only from the ->do_request() routine.
As a nice side effect, this improves code readability a bit.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: mv ide_do_rw_cdrom ide_cd_do_request
Borislav Petkov [Wed, 16 Jul 2008 18:33:45 +0000 (20:33 +0200)]
ide-cd: mv ide_do_rw_cdrom ide_cd_do_request

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: cdrom_start_seek: remove unused argument block
Borislav Petkov [Wed, 16 Jul 2008 18:33:45 +0000 (20:33 +0200)]
ide-cd: cdrom_start_seek: remove unused argument block

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: ide_do_rw_cdrom: add the catch-all bad request case to the if-else block
Borislav Petkov [Wed, 16 Jul 2008 18:33:45 +0000 (20:33 +0200)]
ide-cd: ide_do_rw_cdrom: add the catch-all bad request case to the if-else block

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: remove ide_cd_drain_data and ide_cd_pad_transfer
Borislav Petkov [Wed, 16 Jul 2008 18:33:45 +0000 (20:33 +0200)]
ide-cd: remove ide_cd_drain_data and ide_cd_pad_transfer

Use the generic ide_pad_transfer() helper instead.

[bart: fixup ide_cd_drain_data() -> ide_pad_transfer() conversion]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: remove wait-for-idle-controller bit in cdrom_start_packet_command
Borislav Petkov [Wed, 16 Jul 2008 18:33:45 +0000 (20:33 +0200)]
ide-cd: remove wait-for-idle-controller bit in cdrom_start_packet_command

This is done in the request issue path anyway.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agosgiioc4: call ide_find_port_slot() later
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:44 +0000 (20:33 +0200)]
sgiioc4: call ide_find_port_slot() later

Move ide_find_port_slot() call closer to ide_device_add().

This is basically a preparation for the future changes.

Cc: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoswarm: call ide_find_port_slot() later
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:44 +0000 (20:33 +0200)]
swarm: call ide_find_port_slot() later

Move ide_find_port_slot() call closer to ide_device_add().

This is basically a preparation for the future changes.

Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoicside: always try to probe first interface
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:44 +0000 (20:33 +0200)]
icside: always try to probe first interface

Try to probe first interface even if ide_hwifs[]'s slot for the second
interface cannot be obtained.

While at it:

- Add DRV_NAME define and use it for request_dma() instead of hwif->name.

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agorapide: fix rapide_probe() return value
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:44 +0000 (20:33 +0200)]
rapide: fix rapide_probe() return value

Return -ENOENT on ide_find_port() failure.

While at it:

- Cleanup rapide_probe() a bit.

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove needless includes from setup-pci.c (take 2)
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:44 +0000 (20:33 +0200)]
ide: remove needless includes from setup-pci.c (take 2)

v2:
* sparc build fix. (From Stephen Rothwell)

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove needless includes from ide-taskfile.c (take 2)
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:44 +0000 (20:33 +0200)]
ide: remove needless includes from ide-taskfile.c (take 2)

v2:

On Sunday 15 June 2008, Geert Uytterhoeven wrote:
> As ide-taskfile.c uses scatterlists, it should include <linux/scatterlist.h>.

(v1 broke IDE build on m68k, thanks to Geert for finding the bug)

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove needless includes from ide.c
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:43 +0000 (20:33 +0200)]
ide: remove needless includes from ide.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove superfluous BUG_ON() from set_geometry_intr()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:43 +0000 (20:33 +0200)]
ide: remove superfluous BUG_ON() from set_geometry_intr()

ide_set_handler() bugs on ->handler == NULL so no need to do it
in set_geometry_intr().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: allow any command requesting DMA data phase for HDIO_DRIVE_TASKFILE
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:43 +0000 (20:33 +0200)]
ide: allow any command requesting DMA data phase for HDIO_DRIVE_TASKFILE

Allow any command requesting DMA data phase for HDIO_DRIVE_TASKFILE ioctl
and remove no longer needed task_dma_ok()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-pnp: print driver banner message early
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:43 +0000 (20:33 +0200)]
ide-pnp: print driver banner message early

Print driver banner message early and without interface number.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-h8300: print driver banner message early
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:43 +0000 (20:33 +0200)]
ide-h8300: print driver banner message early

Print driver banner message early and without interface number.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: print message on error in ide_find_port_slot()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:42 +0000 (20:33 +0200)]
ide: print message on error in ide_find_port_slot()

* Add DRV_NAME define to ide-h8300.c.

* Fix ide-h8300.c, swarm.c and sgiioc4.c to set .name field in
  struct ide_port_info to DRV_NAME, then convert these host drivers
  to use ide_find_port_slot() instead of ide_find_port().

* Print message on error in ide_find_port_slot().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide_platform: use struct ide_port_info
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:42 +0000 (20:33 +0200)]
ide_platform: use struct ide_port_info

Convert the driver to use struct ide_port_info.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-h8300: use struct ide_port_info
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:42 +0000 (20:33 +0200)]
ide-h8300: use struct ide_port_info

Convert the driver to use struct ide_port_info.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agorapide: use struct ide_port_info
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:42 +0000 (20:33 +0200)]
rapide: use struct ide_port_info

Convert the driver to use struct ide_port_info.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agocmd640: add ->init_dev method
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:42 +0000 (20:33 +0200)]
cmd640: add ->init_dev method

Convert the driver to use ->init_dev method instead of open-coding devices
init in cmd640x_init().

While at it:

- fix printk()-s to use KERN_INFO level instead of the default KERN_ERR

- use DRV_NAME define in printk()-s

- set proper ->pio_mask also for CONFIG_BLK_DEV_CMD640_ENHANCED=n

There should be no functional changes caused by this patch
(except fixing printk()-s levels).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: ->port_init_devs -> ->init_dev
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:42 +0000 (20:33 +0200)]
ide: ->port_init_devs -> ->init_dev

Change ->port_init_devs method to take 'ide_drive_t *' as an argument
instead of 'ide_hwif_t *' and rename it to ->init_dev.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agocmd640: fix warm-plug support for the secondary interface
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:41 +0000 (20:33 +0200)]
cmd640: fix warm-plug support for the secondary interface

Register secondary interface also when user requested not to probe devices.

While at it:

- remove write-only second_port_toggled variable

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agopowerpc/ide: remove mpc8xx-ide driver
Arnd Bergmann [Wed, 16 Jul 2008 18:33:41 +0000 (20:33 +0200)]
powerpc/ide: remove mpc8xx-ide driver

This driver was only used by arch/ppc code and is obsolete
now with the move to common arch/powerpc code.

[bart: port it over IDE tree, remove leftover 'choice' from Kconfig]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoswarm: use struct ide_port_info
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:41 +0000 (20:33 +0200)]
swarm: use struct ide_port_info

Convert the driver to use struct ide_port_info.

There should be no functional changes caused by this patch.

Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Tested-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: tighten checks on PCI BARs in ide_hwif_configure()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:41 +0000 (20:33 +0200)]
ide: tighten checks on PCI BARs in ide_hwif_configure()

Alan has fixed PCI layer handling of PCI IDE in Compatibility mode so
PCI BAR 0/1 (and/or 2/3) content reported by kernel should never be zero.

Tighten checks on PCI BARs and also fix printk() message while on it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agosgiioc4: use driver name for resource allocation
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:41 +0000 (20:33 +0200)]
sgiioc4: use driver name for resource allocation

Cc: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoicside: use ide_init_port_hw()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:41 +0000 (20:33 +0200)]
icside: use ide_init_port_hw()

* Move ide_find_port() and default_hwif_mmiops() calls from icside_setup()
  to icside_register_v{5,6}().

* Convert icside_setup() to initialize hw_regs_t instead ide_hwif_t
  and icside_register_v{5,6}() to use ide_init_port_hw().

* Rename icside_setup() to icside_setup_ports().

There should be no functional changes caused by this patch.

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoicside: don't use hwif->hwif_data
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:40 +0000 (20:33 +0200)]
icside: don't use hwif->hwif_data

* Move ecard_set_drvdata() from icside_probe() to icside_register_v{5,6}(),
  then use state->ioc_base instead of hwif->hwif_data in icside_maskproc()
  and icside_dma_test_irq().

While at it:

* Add sel field to struct icside_state, then use state->{sel,ioc_base}
  instead of ->{select,config}_data in icside_dma_setup().

There should be no functional changes caused by this patch.

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cs: use struct ide_port_info
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:40 +0000 (20:33 +0200)]
ide-cs: use struct ide_port_info

Convert the driver to use struct ide_port_info.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide_4drives: use struct ide_port_info
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:40 +0000 (20:33 +0200)]
ide_4drives: use struct ide_port_info

Convert the driver to use struct ide_port_info - as a nice side-effect
this fixes hwif->channel initialization.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoau1xxx-ide: don't use hwif->hwif_data
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:40 +0000 (20:33 +0200)]
au1xxx-ide: don't use hwif->hwif_data

* Use &auide_hwif directly instead of using hwif->hwif_data.

While at it:

* No need to initialize hwif->{select,config}_data.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: set hwif->dev in ide_init_port_hw() (take 2)
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:40 +0000 (20:33 +0200)]
ide: set hwif->dev in ide_init_port_hw() (take 2)

* Add 'parent' field to hw_regs_t for optional parent device pointer (needed
  by macio PMAC IDE controllers) and set hwif->dev in ide_init_port_hw().

* Update au1xxx-ide.c, sgiioc4.c, pmac.c and setup-pci.c accordingly.

v2:

* Update scc_pata.c.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: make ide_hwifs[] static
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:40 +0000 (20:33 +0200)]
ide: make ide_hwifs[] static

Move ide_hwifs[] from ide.c to ide-probe.c and make it static.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: fix hwif-s initialization
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:39 +0000 (20:33 +0200)]
ide: fix hwif-s initialization

* Add ide_hwifs[] entry initialization to ide_find_port_slot()
  and remove ide_init_port_data() calls from host drivers.

* Unexport ide_init_port_data().

* Remove no longer needed init_ide_data().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: move PIO blacklist to ide-pio-blacklist.c
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:39 +0000 (20:33 +0200)]
ide: move PIO blacklist to ide-pio-blacklist.c

Move PIO blacklist to ide-pio-blacklist.c.

While at it:

- fix comment

- fix whitespace damage

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove no longer used ide_pio_timings[]
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:39 +0000 (20:33 +0200)]
ide: remove no longer used ide_pio_timings[]

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: move ide_pio_cycle_time() to ide-timings.c
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:39 +0000 (20:33 +0200)]
ide: move ide_pio_cycle_time() to ide-timings.c

All ide_pio_cycle_time() users already select CONFIG_IDE_TIMINGS
so move the function from ide-lib.c to ide-timings.c.

While at it:

- convert ide_pio_cycle_time() to use ide_timing_find_mode()

- cleanup ide_pio_cycle_time() a bit

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-pmac: convert to use ide_timing_find_mode()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:38 +0000 (20:33 +0200)]
ide-pmac: convert to use ide_timing_find_mode()

Also update my Copyrights while at it.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-mpc8xx: convert to use ide_timing_find_mode()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:38 +0000 (20:33 +0200)]
ide-mpc8xx: convert to use ide_timing_find_mode()

Also fix (disabled) debugging code while at it.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agosl82c105: convert to use ide_timing_find_mode()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:38 +0000 (20:33 +0200)]
sl82c105: convert to use ide_timing_find_mode()

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agocy82c693: convert to use ide_timing_find_mode()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:38 +0000 (20:33 +0200)]
cy82c693: convert to use ide_timing_find_mode()

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agocmd64x: convert to use ide_timing_find_mode()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:38 +0000 (20:33 +0200)]
cmd64x: convert to use ide_timing_find_mode()

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agocmd640: convert to use ide_timing_find_mode()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:38 +0000 (20:33 +0200)]
cmd640: convert to use ide_timing_find_mode()

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoalim15x3: convert to use ide_timing_find_mode()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:37 +0000 (20:33 +0200)]
alim15x3: convert to use ide_timing_find_mode()

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoqd65xx: convert to use ide_timing_find_mode()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:37 +0000 (20:33 +0200)]
qd65xx: convert to use ide_timing_find_mode()

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoht6560b: convert to use ide_timing_find_mode()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:37 +0000 (20:33 +0200)]
ht6560b: convert to use ide_timing_find_mode()

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoali14xx: convert to use ide_timing_find_mode()
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:37 +0000 (20:33 +0200)]
ali14xx: convert to use ide_timing_find_mode()

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: convert ide-timing.h to ide-timings.c library (take 2)
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:37 +0000 (20:33 +0200)]
ide: convert ide-timing.h to ide-timings.c library (take 2)

* Don't include ide-timing.h in cs5535 and sis5513 host drivers
  (they don't need it currently).

* Convert ide-timing.h to ide-timings.c library and add CONFIG_IDE_TIMINGS
  config option to be selected by host drivers using the library.

While at it:

- fix ide_timing_find_mode() placement

v2:
* Add missing EXPORT_SYMBOLs. (Stephen Rothwell <sfr@canb.auug.org.au>)

There should be no functional changes caused by this patch.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: checkpatch.pl fixes for ide-timing.h
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:36 +0000 (20:33 +0200)]
ide: checkpatch.pl fixes for ide-timing.h

Also fix placement of comments in ide_timing_compute() while at it.

There should be no functional changes caused by this patch
(md5sum was verified to be the same before/after the patch).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove XFER_* masks from ide-timing.h
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:36 +0000 (20:33 +0200)]
ide: remove XFER_* masks from ide-timing.h

* Check requested xfer mode against xfer modes instead of XFER_* masks
  in ide_timing_compute() and cs5535.c::cs5535_set_speed().

* Remove XFER_[MODE,MWDMA,EPIO,PIO] masks.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: move some bits from ide-timing.h to <linux/ide.h>
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:36 +0000 (20:33 +0200)]
ide: move some bits from ide-timing.h to <linux/ide.h>

Move struct ide_timing and IDE_TIMING_* defines to <linux/ide.h>
from drivers/ide/ide-timing.h.

While at it:

- use u8/u16 instead of short for struct ide_timing fields

- use enum for IDE_TIMING_*

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: use u8 for xfer modes in ide-timing.h
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:36 +0000 (20:33 +0200)]
ide: use u8 for xfer modes in ide-timing.h

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove unused XFER_UDMA_SLOW
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:36 +0000 (20:33 +0200)]
ide: remove unused XFER_UDMA_SLOW

Remove unused XFER_UDMA_SLOW from ide_timing[].

While at it:

- fix re-defining XFER_PIO_5 (no need to define it in ide-timing.h as
  it is defined in <linux/ata.h> which is included by <linux/hdreg.h>)

- fix whitespace damage

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: remove needless includes from ide-lib.c
Bartlomiej Zolnierkiewicz [Wed, 16 Jul 2008 18:33:35 +0000 (20:33 +0200)]
ide: remove needless includes from ide-lib.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoBAST: Remove old IDE driver
Ben Dooks [Fri, 20 Jun 2008 18:53:35 +0000 (20:53 +0200)]
BAST: Remove old IDE driver

Remove the old BAST IDE driver, as we are now using the platform-pata
support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: use the dma safe check for REQ_TYPE_ATA_PC
FUJITA Tomonori [Wed, 16 Jul 2008 18:33:35 +0000 (20:33 +0200)]
ide: use the dma safe check for REQ_TYPE_ATA_PC

This uses the dma safe check for REQ_TYPE_ATA_PC. The dma safe check
is used for only sg requests but it should be used for other non fs
commands.

This uses blk_queue_update_dma_pad to make the intention clear though
ide don't use the blk APIs so it doesn't change anything.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: avoid DMA on the stack for REQ_TYPE_ATA_PC
FUJITA Tomonori [Wed, 16 Jul 2008 18:33:35 +0000 (20:33 +0200)]
ide: avoid DMA on the stack for REQ_TYPE_ATA_PC

Some REQ_TYPE_ATA_PC commands uses the stack buffers for DMA, which
leads to memory corruption on a non-coherent platform.

With regard to alignment and padding, ide-cd has the the dma safe
check for sg requests and REQ_TYPE_ATA_PC. This adds the stack buffer
check to that check.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: it821x in pass-through mode segfaults in 2.6.26-stable
Dimitri Gorokhovik [Wed, 16 Jul 2008 18:33:34 +0000 (20:33 +0200)]
ide: it821x in pass-through mode segfaults in 2.6.26-stable

The driver of ITE8212 in pass-through mode (it8212.noraid=1 on cmndline)
attempts to use the field `.dma_host_set' of the struct ide_dma_ops in
`ide_config_drive_speed' which is set to NULL by default.

So give a value to all fields of the struct ide_dma_ops.

Signed-off-by: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Wed, 16 Jul 2008 02:04:58 +0000 (19:04 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (249 commits)
  powerpc: Fix pte_update for CONFIG_PTE_64BIT and !PTE_ATOMIC_UPDATES
  powerpc: Fix a build problem on ppc32 with new DMA_ATTRs
  ibm_newemac: Add MII mode support to the EMAC RGMII bridge.
  powerpc: Don't spin on sync instruction at boot time
  powerpc: Add VSX load/store alignment exception handler
  powerpc: fix giveup_vsx to save registers correctly
  powerpc: support for latencytop
  powerpc: Remove unnecessary condition when sanity-checking WIMG bits
  powerpc: Add PPC_FEATURE_PSERIES_PERFMON_COMPAT
  powerpc: Add driver for Barrier Synchronization Register
  powerpc: mman.h export fixups
  powerpc/fsl: update crypto node definition and device tree instances
  powerpc/fsl: Refactor device bindings
  powerpc/85xx: Minor fixes for 85xxds and 8536ds board.
  powerpc: Add 82xx/83xx/86xx to 6xx Multiplatform
  powerpc/85xx: publish of device for cds platforms
  powerpc/booke: don't reinitialize time base
  powerpc/86xx: Refactor pic init
  powerpc/CPM: Add i2c pins to dts and board setup
  cpm_uart: Support uart_wait_until_sent()
  ...

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Linus Torvalds [Wed, 16 Jul 2008 01:58:04 +0000 (18:58 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (102 commits)
  [SCSI] scsi_dh: fix kconfig related build errors
  [SCSI] sym53c8xx: Fix bogus sym_que_entry re-implementation of container_of
  [SCSI] scsi_cmnd.h: remove double inclusion of linux/blkdev.h
  [SCSI] make struct scsi_{host,target}_type static
  [SCSI] fix locking in host use of blk_plug_device()
  [SCSI] zfcp: Cleanup external header file
  [SCSI] zfcp: Cleanup code in zfcp_erp.c
  [SCSI] zfcp: zfcp_fsf cleanup.
  [SCSI] zfcp: consolidate sysfs things into one file.
  [SCSI] zfcp: Cleanup of code in zfcp_aux.c
  [SCSI] zfcp: Cleanup of code in zfcp_scsi.c
  [SCSI] zfcp: Move status accessors from zfcp to SCSI include file.
  [SCSI] zfcp: Small QDIO cleanups
  [SCSI] zfcp: Adapter reopen for large number of unsolicited status
  [SCSI] zfcp: Fix error checking for ELS ADISC requests
  [SCSI] zfcp: wait until adapter is finished with ERP during auto-port
  [SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver
  [SCSI] sg: Add target reset support
  [SCSI] lib: Add support for the T10 (SCSI) Data Integrity Field CRC
  [SCSI] sd: Move scsi_disk() accessor function to sd.h
  ...

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Wed, 16 Jul 2008 01:57:38 +0000 (18:57 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  Revert crypto: prng - Deterministic CPRNG

16 years agoftrace: ftrace.txt updates
Steven Rostedt [Tue, 15 Jul 2008 14:57:33 +0000 (10:57 -0400)]
ftrace: ftrace.txt updates

This patch includes ftrace.txt updates that address (mostly) comments from
Andrew Morton. It also includes updates that were suggested by Randy
Dunlap, John Kacur and David Teigland.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge commit 'origin/master'
Benjamin Herrenschmidt [Wed, 16 Jul 2008 01:07:59 +0000 (11:07 +1000)]
Merge commit 'origin/master'

Manual merge of:

arch/powerpc/Kconfig
arch/powerpc/kernel/stacktrace.c
arch/powerpc/mm/slice.c
arch/ppc/kernel/smp.c

16 years agoMerge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux...
Linus Torvalds [Tue, 15 Jul 2008 23:29:18 +0000 (16:29 -0700)]
Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix TSC build error on 32bit

16 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 15 Jul 2008 22:01:29 +0000 (15:01 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (54 commits)
  [MIPS] Remove mips_machtype for LASAT machines
  [MIPS] Remove mips_machtype from EMMA2RH machines
  [MIPS] Remove mips_machtype from ARC based machines
  [MIPS] MTX-1 flash partition setup move to platform devices registration
  [MIPS] TXx9: cleanup and fix some sparse warnings
  [MIPS] TXx9: rename asm-mips/mach-jmr3927 to asm-mips/mach-tx39xx
  [MIPS] remove machtype for group Toshiba
  [MIPS] separate rbtx4927_time_init() and rbtx4937_time_init()
  [MIPS] separate rbtx4927_arch_init() and rbtx4937_arch_init()
  [MIPS] txx9_cpu_clock setup move to rbtx4927_time_init()
  [MIPS] txx9_board_vec set directly without mips_machtype
  [MIPS] IP22: Add platform device for Indy volume buttons
  [MIPS] cmbvr4133: Remove support
  [MIPS] remove wrppmc_machine_power_off()
  [MIPS] replace inline assembler to cpu_wait()
  [MIPS] IP22/28: Add platform devices for HAL2
  [MIPS] TXx9: Update and merge defconfigs
  [MIPS] TXx9: Make single kernel can support multiple boards
  [MIPS] TXx9: Update defconfigs
  [MIPS] TXx9: Reorganize PCI code
  ...

16 years agoDon't crash on IOMMU overflow in A100U2W driver
Mikulas Patocka [Tue, 15 Jul 2008 21:19:55 +0000 (17:19 -0400)]
Don't crash on IOMMU overflow in A100U2W driver

Handle IOMMU overflow correctly, by retrying.  IOMMU errors can happen
and drivers must deal with them.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoBUG_ON on kernel misbehavior on A100U2W driver
Mikulas Patocka [Tue, 15 Jul 2008 21:18:38 +0000 (17:18 -0400)]
BUG_ON on kernel misbehavior on A100U2W driver

With broken Sparc64 IOMMU accounting, the kernel submits larger requests
then allowed.  Better to crash on BUG than corrupt memory.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoAdd udelay to A100U2W SCSI driver
Mikulas Patocka [Tue, 15 Jul 2008 21:16:38 +0000 (17:16 -0400)]
Add udelay to A100U2W SCSI driver

udelay is required on Sun Ultra 5.

I don't know any reason or explanation for this, it was found purely
experimentally.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoFix endianity in A100U2W SCSI driver
Mikulas Patocka [Tue, 15 Jul 2008 21:15:41 +0000 (17:15 -0400)]
Fix endianity in A100U2W SCSI driver

Support big endian systems in a100u2w driver.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agogeneric ipi function calls: wait on alloc failure fallback
Jeremy Fitzhardinge [Tue, 15 Jul 2008 20:22:49 +0000 (13:22 -0700)]
generic ipi function calls: wait on alloc failure fallback

When a GFP_ATOMIC allocation fails, it falls back to allocating the
data on the stack and converting it to a waiting call.

Make sure we actually wait in this case.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'generic-ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 15 Jul 2008 21:02:33 +0000 (14:02 -0700)]
Merge branch 'generic-ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'generic-ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (22 commits)
  generic-ipi: more merge fallout
  generic-ipi: merge fix
  x86, visws: use mach-default/entry_arch.h
  x86, visws: fix generic-ipi build
  generic-ipi: fixlet
  generic-ipi: fix s390 build bug
  generic-ipi: fix linux-next tree build failure
  fix: "smp_call_function: get rid of the unused nonatomic/retry argument"
  fix: "smp_call_function: get rid of the unused nonatomic/retry argument"
  fix "smp_call_function: get rid of the unused nonatomic/retry argument"
  on_each_cpu(): kill unused 'retry' parameter
  smp_call_function: get rid of the unused nonatomic/retry argument
  sh: convert to generic helpers for IPI function calls
  parisc: convert to generic helpers for IPI function calls
  mips: convert to generic helpers for IPI function calls
  m32r: convert to generic helpers for IPI function calls
  arm: convert to generic helpers for IPI function calls
  alpha: convert to generic helpers for IPI function calls
  ia64: convert to generic helpers for IPI function calls
  powerpc: convert to generic helpers for IPI function calls
  ...

Fix trivial conflicts due to rcu updates in kernel/rcupdate.c manually

16 years agoMerge branch 'core/rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 15 Jul 2008 20:59:31 +0000 (13:59 -0700)]
Merge branch 'core/rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core/rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (23 commits)
  rcu classic: update qlen when cpu offline
  rcu: make rcutorture even more vicious: invoke RCU readers from irq handlers (timers)
  rcu: make quiescent rcutorture less power-hungry
  rcu, rcutorture: make quiescent rcutorture less power-hungry
  rcu: make rcutorture more vicious: reinstate boot-time testing
  rcu: make rcutorture more vicious: add stutter feature
  rcutorture: WARN_ON_ONCE(1) when detecting an error
  rcu: remove unused field struct rcu_data::rcu_tasklet
  Revert "prohibit rcutorture from being compiled into the kernel"
  rcu: fix nf_conntrack_helper.c build bug
  rculist.h: fix include in net/netfilter/nf_conntrack_netlink.c
  rcu: remove duplicated include in kernel/rcupreempt.c
  rcu: remove duplicated include in kernel/rcupreempt_trace.c
  RCU, rculist.h: fix list iterators
  rcu: fix rcu_try_flip_waitack_needed() to prevent grace-period stall
  rculist.h: use the rcu API
  rcu: split list.h and move rcu-protected lists into rculist.h
  sched: 1Q08 RCU doc update, add call_rcu_sched()
  rcu: add call_rcu_sched() and friends to rcutorture
  rcu: add rcu_barrier_sched() and rcu_barrier_bh()
  ...

16 years agomm: fix build on non-mmu machines
Sebastian Siewior [Tue, 15 Jul 2008 20:28:46 +0000 (22:28 +0200)]
mm: fix build on non-mmu machines

Commit 1ea0704e0d aka "mm: add a ptep_modify_prot transaction abstraction"

caused:

|  CC      init/main.o
|In file included from include2/asm/pgtable.h:68,
|                 from /home/bigeasy/git/linux-2.6-m68k/include/linux/mm.h:39,
|                 from include2/asm/uaccess.h:8,
|                 from /home/bigeasy/git/linux-2.6-m68k/include/linux/poll.h:13,
|                 from /home/bigeasy/git/linux-2.6-m68k/include/linux/rtc.h:113,
|                 from /home/bigeasy/git/linux-2.6-m68k/include/linux/efi.h:19,
|                 from /home/bigeasy/git/linux-2.6-m68k/init/main.c:43:
|/linux-2.6/include/asm-generic/pgtable.h: In function '__ptep_modify_prot_start':
|/linux-2.6/include/asm-generic/pgtable.h:209: error: implicit declaration of function 'ptep_get_and_clear'
|/linux-2.6/include/asm-generic/pgtable.h:209: error: incompatible types in return
|/linux-2.6/include/asm-generic/pgtable.h: In function '__ptep_modify_prot_commit':
|/linux-2.6/include/asm-generic/pgtable.h:220: error: implicit declaration of function 'set_pte_at'
|make[2]: *** [init/main.o] Error 1
|make[1]: *** [init] Error 2
|make: *** [sub-make] Error 2

on my m68knommu box.

Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoftrace: maintainer
Steven Rostedt [Tue, 15 Jul 2008 17:28:14 +0000 (13:28 -0400)]
ftrace: maintainer

I'm willing to take responsibility for ftrace, and follow up on any
issues that arise due to it.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agox86: fix TSC build error on 32bit
Thomas Gleixner [Tue, 15 Jul 2008 20:08:04 +0000 (22:08 +0200)]
x86: fix TSC build error on 32bit

Dave Hansen reported a build error on 32bit which went unnoticed
as newer gcc versions seem to optimize unused static functions
away before compiling them.

Make vread_tsc() depend on CONFIG_X86_64

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agogeneric-ipi: more merge fallout
Ingo Molnar [Tue, 15 Jul 2008 20:08:52 +0000 (22:08 +0200)]
generic-ipi: more merge fallout

fix more API change fallout in recently merged upstream changes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agogeneric-ipi: merge fix
Ingo Molnar [Tue, 15 Jul 2008 20:03:56 +0000 (22:03 +0200)]
generic-ipi: merge fix

fix merge fallout:

arch/x86/pci/amd_bus.c: In function ‘enable_pci_io_ecs':
arch/x86/pci/amd_bus.c:581: error: too many arguments to function ‘on_each_cpu'

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoMerge branch 'generic-ipi' into generic-ipi-for-linus
Ingo Molnar [Tue, 15 Jul 2008 19:55:59 +0000 (21:55 +0200)]
Merge branch 'generic-ipi' into generic-ipi-for-linus

Conflicts:

arch/powerpc/Kconfig
arch/s390/kernel/time.c
arch/x86/kernel/apic_32.c
arch/x86/kernel/cpu/perfctr-watchdog.c
arch/x86/kernel/i8259_64.c
arch/x86/kernel/ldt.c
arch/x86/kernel/nmi_64.c
arch/x86/kernel/smpboot.c
arch/x86/xen/smp.c
include/asm-x86/hw_irq_32.h
include/asm-x86/hw_irq_64.h
include/asm-x86/mach-default/irq_vectors.h
include/asm-x86/mach-voyager/irq_vectors.h
include/asm-x86/smp.h
kernel/Makefile

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoMerge branch 'sbp2-spindown' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee139...
Linus Torvalds [Tue, 15 Jul 2008 19:39:44 +0000 (12:39 -0700)]
Merge branch 'sbp2-spindown' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'sbp2-spindown' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: sbp2: spin disks down on suspend and shutdown
  firewire: fw-sbp2: spin disks down on suspend and shutdown
  ieee1394: sbp2: fix spindown for PL-3507 and TSB42AA9 firmwares
  firewire: fw-sbp2: fix spindown for PL-3507 and TSB42AA9 firmwares
  scsi: sd: optionally set power condition in START STOP UNIT

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Tue, 15 Jul 2008 19:39:13 +0000 (12:39 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: don't respond to broadcast write requests
  firewire: clean up fw_card reference counting
  firewire: clean up some includes
  firewire: remove unused struct members
  firewire: implement broadcast_channel CSR for 1394a compliance
  ieee1394: dump mmapped iso buffers in core files
  ieee1394: raw1394: Push the BKL down into the driver ioctls
  ieee1394: video1394: reorder module init, prepare BKL removal
  ieee1394: reduce log noise about config ROM CRC errors

16 years agoMerge branch 'core/rcu' into core/rcu-for-linus
Ingo Molnar [Tue, 15 Jul 2008 19:10:12 +0000 (21:10 +0200)]
Merge branch 'core/rcu' into core/rcu-for-linus

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Tue, 15 Jul 2008 18:26:14 +0000 (11:26 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab: rename slab_destroy_objs
  slub: current is always valid
  slub: Add check for kfree() of non slab objects.

16 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Tue, 15 Jul 2008 18:18:10 +0000 (11:18 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  AHCI: Remove an unnecessary flush from ahci_qc_issue
  AHCI: speed up resume
  [libata] Add support for VPD page b1
  ata: endianness annotations in pata drivers
  libata-eh: update atapi_eh_request_sense() to take @dev instead of @qc
  [libata] sata_svw: update code comments relating to data corruption
  libata/ahci: enclosure management support
  libata: improve EH internal command timeout handling
  libata: use ULONG_MAX to terminate reset timeout table
  libata: improve EH retry delay handling
  libata: consistently use msecs for time durations

16 years agoMerge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Tue, 15 Jul 2008 18:16:05 +0000 (11:16 -0700)]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (56 commits)
  i2c: Add detection capability to new-style drivers
  i2c: Call client_unregister for new-style devices too
  i2c: Clean up old chip drivers
  i2c-ibm_iic: Register child nodes
  i2c: New-style EEPROM driver using device IDs
  i2c: Export the i2c_bus_type symbol
  i2c-au1550: Fix PM support
  i2c-dev: Delete empty detach_client callback
  i2c: Drop stray references to lm_sensors
  i2c: Check for ACPI resource conflicts
  i2c-ocores: basic PM support
  i2c-sibyte: SWARM I2C board initialization
  i2c-i801: Fix handling of error conditions
  i2c-i801: Rename local variable temp to status
  i2c-i801: Properly report bus arbitration loss
  i2c-i801: Remove verbose debugging messages
  i2c-algo-pcf: Drop unused struct members
  i2c-algo-pcf: Multi-master lost-arbitration improvement
  i2c: Deprecate the legacy gpio drivers
  i2c-pxa: Initialize early
  ...

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Tue, 15 Jul 2008 18:15:36 +0000 (11:15 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (80 commits)
  ide-floppy: fix unfortunate function naming
  ide-tape: unify idetape_create_read/write_cmd
  ide: add ide_pc_intr() helper
  ide-{floppy,scsi}: read Status Register before stopping DMA engine
  ide-scsi: add more debugging to idescsi_pc_intr()
  ide-scsi: use pc->callback
  ide-floppy: add more debugging to idefloppy_pc_intr()
  ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled
  ide-tape: add ide_tape_io_buffers() helper
  ide-tape: factor out DSC handling from idetape_pc_intr()
  ide-{floppy,tape}: move checking of ->failed_pc to ->callback
  ide: add ide_issue_pc() helper
  ide: add PC_FLAG_DRQ_INTERRUPT pc flag
  ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc()
  ide: add ide_transfer_pc() helper
  ide-scsi: set drive->scsi flag for devices handled by the driver
  ide-{cd,floppy,tape}: remove checking for drive->scsi
  ide: add PC_FLAG_ZIP_DRIVE pc flag
  ide-tape: factor out waiting for good ireason from idetape_transfer_pc()
  ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc()
  ...

16 years agoide-floppy: fix unfortunate function naming
Borislav Petkov [Tue, 15 Jul 2008 19:22:03 +0000 (21:22 +0200)]
ide-floppy: fix unfortunate function naming

mv idefloppy_transfer_pc1 idefloppy_start_pc_transfer
mv idefloppy_transfer_pc2 idefloppy_transfer_pc

which describes their functionality and disambiguates them. There should be no
functionality change introduced by this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-tape: unify idetape_create_read/write_cmd
Borislav Petkov [Tue, 15 Jul 2008 19:22:03 +0000 (21:22 +0200)]
ide-tape: unify idetape_create_read/write_cmd

A straightforward one. There should be no functional change resulting from this
change.

[bart: minor fixups]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>