Michael Chan [Fri, 21 Dec 2007 03:56:37 +0000 (19:56 -0800)]
[BNX2]: Introduce new bnx2_napi structure.
Introduce a bnx2_napi structure that will hold a napi_struct and
other fields to handle NAPI polling for the napi_struct. Various tx
and rx indexes and status block pointers will be moved from the main
bnx2 structure to this bnx2_napi structure.
Most NAPI path functions are modified to be passed this bnx2_napi
struct pointer.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Fri, 21 Dec 2007 03:56:09 +0000 (19:56 -0800)]
[BNX2]: Restructure IRQ datastructures.
Add a table to keep track of multiple IRQs and restructure the IRQ
request and free functions so that they can be easily expanded to
handle multiple IRQs.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 12 Dec 2007 19:19:57 +0000 (11:19 -0800)]
[BNX2]: Enable S/G for jumbo RX.
If the MTU requires more than 1 page for the SKB, enable the page ring
and calculate the size of the page ring. This will guarantee order-0
allocation regardless of the MTU size.
Fixup loopback test packet size so that we don't deal with the pages
during loopback test.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 12 Dec 2007 19:17:43 +0000 (11:17 -0800)]
[BNX2]: Restructure RX ring init. code.
Factor out the common functions that will be used to initialize the
normal RX rings and the page rings.
Change the copybreak constant RX_COPY_THRESH to 128. This same
constant will be used for the max. size of the linear SKB when pages
are used. Copybreak will be turned off when pages are used.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Schmidt [Wed, 12 Dec 2007 19:01:43 +0000 (11:01 -0800)]
[IPIP]: Allow rebinding the tunnel to another interface
Once created, an IP tunnel can't be bound to another device.
(reported as https://bugzilla.redhat.com/show_bug.cgi?id=419671)
To reproduce:
# create a tunnel:
ip tunnel add tunneltest0 mode ipip remote 10.0.0.1 dev eth0
# try to change the bounding device from eth0 to eth1:
ip tunnel change tunneltest0 dev eth1
# show the result:
ip tunnel show tunneltest0
tunneltest0: ip/ip remote 10.0.0.1 local any dev eth0 ttl inherit
Notice the bound device has not changed from eth0 to eth1.
This patch fixes it. When changing the binding, it also recalculates the
MTU according to the new bound device's MTU.
If the change is acceptable, I'll do the same for GRE and SIT tunnels.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 12 Dec 2007 18:44:43 +0000 (10:44 -0800)]
[IPSEC]: Add ICMP host relookup support
RFC 4301 requires us to relookup ICMP traffic that does not match any
policies using the reverse of its payload. This patch implements this
for ICMP traffic that originates from or terminates on localhost.
This is activated on outbound with the new policy flag XFRM_POLICY_ICMP,
and on inbound by the new state flag XFRM_STATE_ICMP.
On inbound the policy check is now performed by the ICMP protocol so
that it can repeat the policy check where necessary.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 12 Dec 2007 18:44:16 +0000 (10:44 -0800)]
[IPSEC]: Added xfrm_decode_session_reverse and xfrmX_policy_check_reverse
RFC 4301 requires us to relookup ICMP traffic that does not match any
policies using the reverse of its payload. This patch adds the functions
xfrm_decode_session_reverse and xfrmX_policy_check_reverse so we can get
the reverse flow to perform such a lookup.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Wed, 12 Dec 2007 16:23:08 +0000 (14:23 -0200)]
[TFRC]: Remove previous loss intervals implementation
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Wed, 12 Dec 2007 16:06:14 +0000 (14:06 -0200)]
[CCID3]: Interface CCID3 code with newer Loss Intervals Database
This hooks up the TFRC Loss Interval database with CCID 3 packet reception.
In addition, it makes the CCID-specific computation of the first loss
interval (which requires access to all the guts of CCID3) local to ccid3.c.
The patch also fixes an omission in the DCCP code, that of a default /
fallback RTT value (defined in section 3.4 of RFC 4340 as 0.2 sec); while
at it, the upper bound of 4 seconds for an RTT sample has been reduced to
match the initial TCP RTO value of 3 seconds from[RFC 1122, 4.2.3.1].
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Wed, 12 Dec 2007 16:03:01 +0000 (14:03 -0200)]
[TFRC]: CCID3 (and CCID4) needs to access these inlines
This moves two inlines back to packet_history.h: these are not private
to packet_history.c, but are needed by CCID3/4 to detect whether a new
loss is indicated, or whether a loss is already pending.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Further, documentation of ccid3_hc_rx_sock (capitalisation) is made consistent.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Wed, 12 Dec 2007 15:50:51 +0000 (13:50 -0200)]
[TFRC]: Ringbuffer to track loss interval history
A ringbuffer-based implementation of loss interval history is easier to
maintain, allocate, and update.
The `swap' routine to keep the RX history sorted is due to and was written
by Arnaldo Carvalho de Melo, simplifying an earlier macro-based variant.
Details:
* access to the Loss Interval Records via macro wrappers (with safety checks);
* simplified, on-demand allocation of entries (no extra memory consumption on
lossless links); cache allocation is local to the module / exported as service;
* provision of RFC-compliant algorithm to re-compute average loss interval;
* provision of comprehensive, new loss detection algorithm
- support for all cases of loss, including re-ordered/duplicate packets;
- waiting for NDUPACK=3 packets to fill the hole;
- updating loss records when a late-arriving packet fills a hole.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Wed, 12 Dec 2007 14:28:40 +0000 (12:28 -0200)]
[TFRC]: Loss interval code needs the macros/inlines that were moved
This moves the inlines (which were previously declared as macros) back into
packet_history.h since the loss detection code needs to be able to read entries
from the RX history in order to create the relevant loss entries: it needs at
least tfrc_rx_hist_loss_prev() and tfrc_rx_hist_last_rcv(), which in turn
require the definition of the other inlines (macros).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Wed, 12 Dec 2007 14:24:49 +0000 (12:24 -0200)]
[TFRC]: Put RX/TX initialisation into tfrc.c
This separates RX/TX initialisation and puts all packet history / loss intervals
initialisation into tfrc.c.
The organisation is uniform: slab declaration -> {rx,tx}_init() -> {rx,tx}_exit()
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Tue, 11 Dec 2007 12:19:17 +0000 (04:19 -0800)]
[NETNS]: struct net content re-work (v3)
Recently David Miller and Herbert Xu pointed out that struct net becomes
overbloated and un-maintainable. There are two solutions:
- provide a pointer to a network subsystem definition from struct net.
This costs an additional dereferrence
- place sub-system definition into the structure itself. This will speedup
run-time access at the cost of recompilation time
The second approach looks better for us. Other sub-systems will follow.
Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Tue, 11 Dec 2007 10:25:35 +0000 (02:25 -0800)]
[IPV6]: make the protocol initialization to return an error code
This patchset makes the different protocols to return an error code, so
the af_inet6 module can check the initialization was correct or not.
The raw6 was taken into account to be consistent with the rest of the
protocols, but the registration is at the same place.
Because the raw6 has its own init function, the proto and the ops structure
can be moved inside the raw6.c file.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Tue, 11 Dec 2007 10:25:01 +0000 (02:25 -0800)]
[IPV6]: make inet6_register_protosw to return an error code
This patch makes the inet6_register_protosw to return an error code.
The different protocols can be aware the registration was successful or
not and can pass the error to the initial caller, af_inet6.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Tue, 11 Dec 2007 10:23:54 +0000 (02:23 -0800)]
[IPV6]: make extended headers to return an error at initialization
This patch factorize the code for the differents init functions for rthdr,
nodata, destopt in a single function exthdrs_init.
This function returns an error so the af_inet6 module can check correctly
the initialization.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Tue, 11 Dec 2007 10:23:18 +0000 (02:23 -0800)]
[IPV6]: make flowlabel to return an error
This patch makes the flowlab subsystem to return an error code and makes
some cleanup with procfs ifdefs.
The af_inet6 will use the flowlabel init return code to check the initialization
was correct.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 11 Dec 2007 10:17:40 +0000 (02:17 -0800)]
[IPV4]: Cleanup sysctl manipulations in devinet.c
This includes:
* moving neigh_sysctl_(un)register calls inside
devinet_sysctl_(un)register ones, as they are always
called in pairs;
* making __devinet_sysctl_unregister() to unregister
the ipv4_devconf struct, while original devinet_sysctl_unregister()
works with the in_device to handle both - devconf and
neigh sysctls;
* make stubs for CONFIG_SYSCTL=n case to get rid of
in-code ifdefs.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Tue, 11 Dec 2007 10:12:04 +0000 (02:12 -0800)]
[TCP]: Use BUILD_BUG_ON for tcp_skb_cb size checking
The sizeof(struct tcp_skb_cb) should not be less than the
sizeof(skb->cb). This is checked in net/ipv4/tcp.c, but
this check can be made more gracefully.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 11 Dec 2007 10:00:30 +0000 (02:00 -0800)]
[NET]: dst_ifdown() cleanup
This cleanup shrinks size of net/core/dst.o on i386 from 1299 to 1289 bytes.
(This is because dev_hold()/dev_put() are doing atomic_inc()/atomic_dec() and
force compiler to re-evaluate memory contents.)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 11 Dec 2007 09:53:43 +0000 (01:53 -0800)]
[IPSEC]: Add xfrm_input_state helper
This patch adds the xfrm_input_state helper function which returns the
current xfrm state being processed on the input path given an sk_buff.
This is currently only used by xfrm_input but will be used by ESP upon
asynchronous resumption.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Sat, 8 Dec 2007 18:26:59 +0000 (16:26 -0200)]
[CCID3]: HC-receiver should not insert timestamps as HC-sender doesn't uses it
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Sat, 8 Dec 2007 18:08:41 +0000 (16:08 -0200)]
[TFRC]: The function tfrc_rx_hist_entry_delete() is not used anymore
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Sat, 8 Dec 2007 17:08:08 +0000 (15:08 -0200)]
[TFRC]: Move comment.
Moved up the comment "Receiver routines" above the first occurrence of
RX history routines.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[NET]: Remove unused "mibalign" argument for snmp_mib_init().
With fixes from Arnaldo Carvalho de Melo.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Sat, 8 Dec 2007 08:14:54 +0000 (00:14 -0800)]
[IPV6]: route6 remove ifdef for fib_rules
The patch defines the usual static inline functions when the code is
disabled for fib6_rules. That's allow to remove some ifdef in route.c
file and make the code a little more clear.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Sat, 8 Dec 2007 08:14:11 +0000 (00:14 -0800)]
[IPV6]: remove ifdef in route6 for xfrm6
The following patch create the usual static inline functions to disable
the xfrm6_init and xfrm6_fini function when XFRM is off.
That's allow to remove some ifdef and make the code a little more clear.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Sat, 8 Dec 2007 08:13:32 +0000 (00:13 -0800)]
[IPV6]: create route6 proc init-fini functions
Make the proc creation/destruction to be a separate function. That
allows to remove the #ifdef CONFIG_PROC_FS in the init/fini function
and make them more readable.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Sat, 8 Dec 2007 08:11:51 +0000 (00:11 -0800)]
[NET] sysctl: prepare core tables to point to netns variables
Some of ctl variables are going to be on the struct
net. Here's the way to adjust the ->data pointer on the
ctl_table-s to point on the right variable.
Since some pointers still point on the global variables,
I keep turning the write bits off on such tables.
This looks to become a common procedure for net sysctls,
so later parts of this code may migrate to some more
generic place.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Sat, 8 Dec 2007 08:09:24 +0000 (00:09 -0800)]
[NET] sysctl: make the sys.net.core sysctls per-namespace
Making them per-namespace is required for the following
two reasons:
First, some ctl values have a per-namespace meaning.
Second, making them writable from the sub-namespace
is an isolation hole.
So I introduce the pernet operations to create these
tables. For init_net I use the existing statically
declared tables, for sub-namespace they are duplicated
and the write bits are removed from the mode.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Cheng [Fri, 7 Dec 2007 08:51:11 +0000 (00:51 -0800)]
[XFRM] net/xfrm/xfrm_state.c: use LIST_HEAD instead of LIST_HEAD_INIT
single list_head variable initialized with LIST_HEAD_INIT could almost
always can be replaced with LIST_HEAD declaration, this shrinks the code
and looks better.
Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Cheng [Fri, 7 Dec 2007 08:50:43 +0000 (00:50 -0800)]
[X25]: use LIST_HEAD instead of LIST_HEAD_INIT
single list_head variable initialized with LIST_HEAD_INIT could almost
always can be replaced with LIST_HEAD declaration, this shrinks the code
and looks better.
Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Cheng [Fri, 7 Dec 2007 08:50:15 +0000 (00:50 -0800)]
[LAPB] net/lapb/lapb_iface.c: use LIST_HEAD instead of LIST_HEAD_INIT
single list_head variable initialized with LIST_HEAD_INIT could almost
always can be replaced with LIST_HEAD declaration, this shrinks the code
and looks better.
Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Cheng [Fri, 7 Dec 2007 08:49:47 +0000 (00:49 -0800)]
[IPV4] net/ipv4/cipso_ipv4.c: use LIST_HEAD instead of LIST_HEAD_INIT
single list_head variable initialized with LIST_HEAD_INIT could almost
always can be replaced with LIST_HEAD declaration, this shrinks the code
and looks better.
Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Cheng [Fri, 7 Dec 2007 08:49:17 +0000 (00:49 -0800)]
[NET] net/core/dev.c: use LIST_HEAD instead of LIST_HEAD_INIT
single list_head variable initialized with LIST_HEAD_INIT could almost
always can be replaced with LIST_HEAD declaration, this shrinks the code
and looks better.
Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[IPV4]: Move trie_local and trie_main into the proc iterator.
We only use these variables when displaying the trie in proc so
place them into the iterator to make this explicit. We should
probably do something smarter to handle the CONFIG_IP_MULTIPLE_TABLES
case but at least this makes it clear that the silliness is limited
to the display in /proc.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
[IPV4]: Remove ip_fib_local_table and ip_fib_main_table defines.
There are only 2 users and it doesn't hurt to call fib_get_table
instead, and it makes it easier to make the fib network namespace
aware.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Fri, 7 Dec 2007 08:45:16 +0000 (00:45 -0800)]
[IPV6] route6/fib6: Don't panic a kmem_cache_create.
If the kmem_cache_creation fails, the kernel will panic. It is
acceptable if the system is booting, but if the ipv6 protocol is
compiled as a module and it is loaded after the system has booted, do
we want to panic instead of just failing to initialize the protocol ?
The init function is now returning an error and this one is checked
for protocol initialization. So the ipv6 protocol will safely fails.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Fri, 7 Dec 2007 08:44:29 +0000 (00:44 -0800)]
[IPV6]: Make af_inet6 to check ip6_route_init return value.
The af_inet6 initialization function does not check the return code of
the route initilization, so if something goes wrong, the protocol
initialization will continue anyway. This patch takes into account
the modification made in the different route's initialization
subroutines to check the return value and to make the protocol
initialization to fail.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Fri, 7 Dec 2007 08:43:48 +0000 (00:43 -0800)]
[IPV6]: Make ip6_route_init to return an error code.
The route initialization function does not return any value to notify
if the initialization is successful or not. This patch checks all
calls made for the initilization in order to return a value for the
caller.
Unfortunately, proc_net_fops_create will return a NULL pointer if
CONFIG_PROC_FS is off, so we can not check the return code without an
ifdef CONFIG_PROC_FS block in the ip6_route_init function.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Fri, 7 Dec 2007 08:42:52 +0000 (00:42 -0800)]
[IPV6]: Make fib6_rules_init to return an error code.
When the fib_rules initialization finished, no return code is provided
so there is no way to know, for the caller, if the initialization has
been successful or has failed. This patch fix that.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Fri, 7 Dec 2007 08:42:11 +0000 (00:42 -0800)]
[IPV6]: Make xfrm6_init to return an error code.
The xfrm initialization function does not return any error code, so if
there is an error, the caller can not be advise of that. This patch
checks the return code of the different called functions in order to
return a successful or failed initialization.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Fri, 7 Dec 2007 08:40:34 +0000 (00:40 -0800)]
[IPV6]: Make fib6_init to return an error code.
If there is an error in the initialization function, nothing is
followed up to the caller. So I add a return value to be set for the
init function.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Credit here goes to Gerrit Renker, that provided the initial implementation for
this new codebase.
I modified it just to try to make it closer to the existing API, renaming some
functions, add namespacing and fix one bug where the tfrc_rx_hist_alloc was not
freeing the allocated ring entries on the error path.
Original changeset comment from Gerrit:
-----------
This provides a new, self-contained and generic RX history service for TFRC
based protocols.
Details:
* new data structure, initialisation and cleanup routines;
* allocation of dccp_rx_hist entries local to packet_history.c,
as a service exported by the dccp_tfrc_lib module.
* interface to automatically track highest-received seqno;
* receiver-based RTT estimation (needed for instance by RFC 3448, 6.3.1);
* a generic function to test for `data packets' as per RFC 4340, sec. 7.7.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 6 Dec 2007 14:29:07 +0000 (12:29 -0200)]
[CCID3]: The receiver of a half-connection does not set window counter values
Only the sender sets window counters [RFC 4342, sections 5 and 8.1].
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This is in preparation for merging the new rx history code written by Gerrit Renker.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This is in preparation for merging the new rx history code written by Gerrit Renker.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[TFRC]: Rename tfrc_tx_hist to tfrc_tx_hist_slab, for consistency
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 6 Dec 2007 14:27:15 +0000 (12:27 -0200)]
[DCCP]: Introduce generic function to test for `data packets'
as per RFC 4340, sec. 7.7.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 6 Dec 2007 14:26:38 +0000 (12:26 -0200)]
[TFRC]: Provide central source file and debug facility
This patch changes the tfrc_lib module in the following manner:
(1) a dedicated tfrc source file to call the packet history &
loss interval init/exit functions.
(2) a dedicated tfrc_pr_debug macro with toggle switch `tfrc_debug'.
Commiter note: renamed tfrc_module.c to tfrc.c, and made CONFIG_IP_DCCP_CCID3
select IP_DCCP_TFRC_LIB.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Thu, 6 Dec 2007 05:19:44 +0000 (21:19 -0800)]
[ARP]: Minus one level of indentation in arp_req_set
The ATF_PUBL requests are handled completely separate from
the others. Emphasize it with a separate function. This also
reduces the indentation level.
The same issue exists with the arp_delete_request, but
when I tried to make it in one patch diff produced completely
unreadable patch. So I split it into two, but they may be
done with one commit.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Thu, 6 Dec 2007 05:14:28 +0000 (21:14 -0800)]
[IPV4] ROUTE: Clean up proc files creation.
The rt_cache, stats/rt_cache and rt_acct(optional) files
creation looks a bit messy. Clean this out and join them
to other proc-related functions under the proper ifdef.
The struct net * argument in a new function will help net
namespaces patches look nicer.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Thu, 6 Dec 2007 05:13:48 +0000 (21:13 -0800)]
[IPV4] ROUTE: Collect proc-related functions together
The net/ipv4/route.c file declares some entries for proc
to dump some routing info. The reading functions are
scattered over this file - collect them together.
Besides, remove a useless IP_RT_ACCT_CPU macro.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 5 Dec 2007 09:53:40 +0000 (01:53 -0800)]
[UDP]: Only increment counter on first peek/recv
The previous move of the the UDP inDatagrams counter caused each
peek of the same packet to be counted separately. This may be
undesirable.
This patch fixes this by adding a bit to sk_buff to record whether
this packet has already been seen through skb_recv_datagram. We
then only increment the counter when the packet is seen for the
first time.
The only dodgy part is the fact that skb_recv_datagram doesn't have
a good way of returning this new bit of information. So I've added
a new function __skb_recv_datagram that does return this and made
skb_recv_datagram a wrapper around it.
The plan is to eventually replace all uses of skb_recv_datagram with
this new function at which time it can be renamed its proper name.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 11 Dec 2007 19:30:32 +0000 (11:30 -0800)]
[UDP]: Restore missing inDatagrams increments
The previous move of the the UDP inDatagrams counter caused the
counting of encapsulated packets, SUNRPC data (as opposed to call)
packets and RXRPC packets to go missing.
This patch restores all of these.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 5 Dec 2007 09:50:24 +0000 (01:50 -0800)]
[IPV6]: Eliminate difference in actions of sysctl and proc handler for conf.all.forwarding
The only difference in this case is that updating all.forwarding
causes the update in default.forwarding when done via proc, but
not via the system call.
Besides, this consolidates a good portion of code.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 5 Dec 2007 09:44:58 +0000 (01:44 -0800)]
[INET]: Merge sys.net.ipv4.ip_forward and sys.net.ipv4.conf.all.forwarding
AFAIS these two entries should do the same thing - change the
forwarding state on ipv4_devconf and on all the devices.
I propose to merge the handlers together using ctl paths.
The inet_forward_change() is static after this and I move
it higher to be closer to other "propagation" helpers and
to avoid diff making patches based on { and } matching :)
i.e. - make them easier to read.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Fri, 25 Jan 2008 01:04:49 +0000 (17:04 -0800)]
[TR]: Use ctl paths to register net/token-ring/ table
The same thing for token-ring - use ctl paths and get
rid of external references on the tr_table.
Unfortunately, I couldn't split this patch into cleanup and
use-the-paths parts.
As a lame excuse I can say, that the cleanup is just moving
the tr_table from one file to another - closet to a single
variable, that this ctl table tunes. Since the source file
becomes empty after the move, I remove it.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-2.6-omap-h63xx.git / log