x86_32: remove __PAGE_KERNEL(_EXEC)
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Older x86-32 processors do not support global mappings (PGD), so must
only use it if the processor supports it.

The _PAGE_KERNEL* flags always have _PAGE_KERNEL set, since logically
we always want it set.

This is OK even on processors which do not support PGD, since all
_PAGE flags are masked with __supported_pte_mask before being turned
into a real in-pagetable pte.  On 32-bit systems, __supported_pte_mask
is initialized to not contain _PAGE_GLOBAL, and it is then added if
the CPU is found to support it.

The x86-32 code used to use __PAGE_KERNEL/__PAGE_KERNEL_EXEC for this
purpose, but they're now redundant and can be removed.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: always set _PAGE_GLOBAL in _PAGE_KERNEL* flags

Consistently set _PAGE_GLOBAL in _PAGE_KERNEL flags.  This makes 32-
and 64-bit code consistent, and removes some special cases where
__PAGE_KERNEL* did not have _PAGE_GLOBAL set, causing confusion as a
result of the inconsistencies.

This patch only affects x86-64, which generally always supports PGD.
The x86-32 patch is next.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86_64/setup: unconditionally populate the pgd

When allocating a new pud, unconditionally populate the pgd (why did
we bother to create a new pud if we weren't going to populate it?).

This will only happen if the pgd slot was empty, since any existing
pud will be reused.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix "x86: let setup_arch call init_apic_mappings for 32bit"

add back this line lost from trap_init():

        set_trap_gate(0,  &divide_error);

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move prefill_possible_map calling early, fix

fix:

arch/x86/kernel/built-in.o: In function `setup_arch':
: undefined reference to `prefill_possible_map'

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move prefill_possible_map calling early

call it right after we are done with MADT/mptable handling, instead of
doing that in setup_per_cpu_areas() later on...

this way for_possible_cpu() can be used early.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move init_cpu_to_node after get_smp_config

when acpi=off, cpu_to_apicid is ready after get_smp_config
so need to move init_cpu_to_node after it.

otherwise, we will get wrong cpu->node mapping, and it will rely on
amd_detect_cmp() to correct it - but that is too late as
setup_per_cpu_data is already called before that so  we will get
per_cpu_data on the wrong node.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge zones_sizes_init for numa and non numa on 32-bit

move out e820_register_active_regions from non numa zones_sizes_init()
and remove numa version zones_sizes_init().

and let 32 bit call remove_all_active_ranges() in setup_arch() directly
like 64-bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: do not printout if we do not find setup_data

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: make early_res_to_bootmem print out less 80 width chars

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: change copy_e820_map to append_e820_map

so it has a more meaningful name.
also change it to static.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix documentation bug about relocatability

This patch fixes a small bug in documentation: x86_64 also has now
the ability to build a relocatable kernel.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: vgoyal@redhat.com
Cc: kexec@lists.infradead.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: find offset for crashkernel reservation automatically

This patch removes the need of the crashkernel=...@offset parameter to define
a fixed offset for crashkernel reservation. That feature can be used together
with a relocatable kernel where the kexec-tools relocate the kernel and
get the actual offset from /proc/iomem.

The use case is a kernel where the .text+.data+.bss is after 16M physical
memory (debug kernel with lockdep on x86_64 can cause that) which caused a
major pain in autoconfiguration in our distribution.

Also, that patch unifies crashdump architectures a bit since IA64 has
that semantics from the very beginning of the kdump port.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: vgoyal@redhat.com
Cc: Bernhard Walle <bwalle@suse.de>
Cc: kexec@lists.infradead.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: cleanup e820_setup_gap(), v2

e820_search_gap also take a end_addr parameter to limit search from
start_addr to end_addr.

Signed-off-by: AloK N Kataria <akataria@vmware.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: "lenb@kernel.org" <lenb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add check for node passed to node_to_cpumask, v3

  * When CONFIG_DEBUG_PER_CPU_MAPS is set, the node passed to
    node_to_cpumask and node_to_cpumask_ptr should be validated.
    If invalid, then a dump_stack is performed and a zero cpumask
    is returned.

v2: Slightly different version to remove a compiler warning.
v3: Redone to reflect moving setup.c -> setup_percpu.c

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: "akpm@linux-foundation.org" <akpm@linux-foundation.org>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix CPA self-test for "x86/paravirt: groundwork for 64-bit Xen support"

Ingo Molnar wrote:
> -tip auto-testing found pagetable corruption (CPA self-test failure):
>
> [   32.956015] CPA self-test:
> [   32.958822]  4k 2048 large 508 gb 0 x 2556[ffff880000000000-ffff88003fe00000] miss 0
> [   32.964000] CPA ffff88001d54e000: bad pte 1d4000e3
> [   32.968000] CPA ffff88001d54e000: unexpected level 2
> [   32.972000] CPA ffff880022c5d000: bad pte 22c000e3
> [   32.976000] CPA ffff880022c5d000: unexpected level 2
> [   32.980000] CPA ffff8800200ce000: bad pte 200000e3
> [   32.984000] CPA ffff8800200ce000: unexpected level 2
> [   32.988000] CPA ffff8800210f0000: bad pte 210000e3
>
> config and full log can be found at:
>
>  http://redhat.com/~mingo/misc/config-Mon_Jun_30_11_11_51_CEST_2008.bad
>  http://redhat.com/~mingo/misc/log-Mon_Jun_30_11_11_51_CEST_2008.bad

Phew.  OK, I've worked this out.  Short version is that's it's a false
alarm, and there was no real failure here.  Long version:

    * I changed the code to create the physical mapping pagetables to
      reuse any existing mapping rather than replace it.   Specifically,
      reusing an pud pointed to by the pgd caused this symptom to appear.
    * The specific PUD being reused is the one created statically in
      head_64.S, which creates an initial 1GB mapping.
    * That mapping doesn't have _PAGE_GLOBAL set on it, due to the
      inconsistency between __PAGE_* and PAGE_*.
    * The CPA test attempts to clear _PAGE_GLOBAL, and then checks to
      see that the resulting range is 1) shattered into 4k pages, and 2)
      has no _PAGE_GLOBAL.
    * However, since it didn't have _PAGE_GLOBAL on that range to start
      with, change_page_attr_clear() had nothing to do, and didn't
      bother shattering the range,
    * resulting in the reported messages

The simple fix is to set _PAGE_GLOBAL in level2_ident_pgt.

An additional fix to make CPA testing more robust by using some other
pagetable bit (one of the unused available-to-software ones).  This
would solve spurious CPA test warnings under Xen which uses _PAGE_GLOBAL
for its own purposes (ie, not under guest control).

Also, we should revisit the use of _PAGE_GLOBAL in asm-x86/pgtable.h,
and use it consistently, and drop MAKE_GLOBAL.  The first time I
proposed it it caused breakages in the very early CPA code; with luck
that's all fixed now.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: don't reallocate pgt for node0

kva ram already mapped right after away, so don't need to get that for low ram.
avoid wasting one copy of pgdat.

also add node id in early_res name in case we get it from find_e820_area.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move reserve_setup_data to setup.c

Ying Huang would like setup_data to be reserved, but not included in the
no save range.

Here we try to modify the e820 table to reserve that range early.
also add that in early_res in case bootloader messes up with the ramdisk.

other solution would be
1. add early_res_to_highmem...
2. early_res_to_e820...
but they could reserve another type memory wrongly, if early_res has some
resource reserved early, and not needed later, but it is not removed from
early_res in time. Like the RAMDISK (already handled).

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: andi@firstfloor.org
Tested-by: Huang, Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, paravirt, 64-bit: fix compile errors with IA32_EMULATION off

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

- x86: move early_ioremap prototypes to io.h

now that the early-ioremap code is unified, move the prototypes too from
io_32.h to io.h.

this fixes:

arch/x86/kernel/setup.c:531: error: implicit declaration of function ‘early_ioremap_init'

on 64-bit.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: setup_arch() && early_ioremap_init()

Looks like the setup.c unification missed the early_ioremap init from
the early_ioremap unification.  Unconditionally call early_ioremap_init().

needed for "x86/paravirt: groundwork for 64-bit Xen support".

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: nmi_watchdog - documentation fix - v2

typo fixes from Randy Dunlap and Alan Cox.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: nmi_watchdog - documentation fix

nmi_watchdog is set to NMI_NONE by default (ie disabled) on _any_
mode so lets fix documentation too.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use disable_apic in 32bit

change the enable_local_apic to static force_enable_local_apic for 32bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix init_memory_mapping over boundary, v4

use PMD_SHIFT to calculate boundary also adjust size for pre-allocated
table size

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix warning in e820_reserve_resources with 32bit

when 64bit resource is not enabled, we get:

arch/x86/kernel/e820.c: In function ‘e820_reserve_resources’:
arch/x86/kernel/e820.c:1217: warning: comparison is always false due to limited range of data type

because res->start/end is resource_t aka u32. it will overflow.

fix it with temp end of u64

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix init_memory_mapping over boundary v3

some ram-end boundary only has page alignment, instead of 2M alignment.

v2: make init_memory_mapping more solid: start could be any value other than 0
v3: fix NON PAE by handling left over in kernel_physical_mapping

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86_64: fix non-paravirt compilation

Make sure SWAPGS and PARAVIRT_ADJUST_EXCEPTION_FRAME are properly
defined when CONFIG_PARAVIRT is off.

Fixes Ingo's build failure:
arch/x86/kernel/entry_64.S: Assembler messages:
arch/x86/kernel/entry_64.S:1201: Error: invalid character '_' in mnemonic
arch/x86/kernel/entry_64.S:1205: Error: invalid character '_' in mnemonic
arch/x86/kernel/entry_64.S:1209: Error: invalid character '_' in mnemonic
arch/x86/kernel/entry_64.S:1213: Error: invalid character '_' in mnemonic

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: let setup_arch call init_apic_mappings for 32bit

instead of calling it from trap_init()

also move init ioapic mapping out of apic_32.c

so 32 bit do same as 64 bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: early res print out alignment v2

v2: fix print info to cont

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/paravirt: groundwork for 64-bit Xen support, fix #2

Ingo Molnar wrote:
> that fixed the build but now we've got a boot crash with this config:
>
>  time.c: Detected 2010.304 MHz processor.
>  spurious 8259A interrupt: IRQ7.
>  BUG: unable to handle kernel NULL pointer dereference at  0000000000000000
>  IP: [<0000000000000000>]
>  PGD 0
>  Thread overran stack, or stack corrupted
>  Oops: 0010 [1] SMP
>  CPU 0
>

I don't know if this will fix this bug, but it's definitely a bugfix.
It was trashing random pages by overwriting them with pagetables...

Don't trash a large pmd's data when mapping physical memory.
This is a bugfix for "x86_64: adjust mapping of physical pagetables
to work with Xen".

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/paravirt: groundwork for 64-bit Xen support, fix

Ingo Molnar wrote:
> * Jeremy Fitzhardinge <jeremy@goop.org> wrote:
>
>
>>> It quickly broke the build in testing:
>>>
>>>  include/asm/pgalloc.h: In function ‘paravirt_pgd_free':
>>>  include/asm/pgalloc.h:14: error: parameter name omitted
>>>  arch/x86/kernel/entry_64.S: In file included from
>>> arch/x86/kernel/traps_64.c:51:include/asm/pgalloc.h: In function
>>> ‘paravirt_pgd_free':
>>>  include/asm/pgalloc.h:14: error: parameter name omitted
>>>
>>>
>> No, looks like my fault.  The non-PARAVIRT version of
>> paravirt_pgd_free() is:
>>
>> static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *) {}
>>
>> but C doesn't like missing parameter names, even if unused.
>>
>> This should fix it:
>>
>
> that fixed the build but now we've got a boot crash with this config:
>
>  time.c: Detected 2010.304 MHz processor.
>  spurious 8259A interrupt: IRQ7.
>  BUG: unable to handle kernel NULL pointer dereference at  0000000000000000
>  IP: [<0000000000000000>]
>  PGD 0
>  Thread overran stack, or stack corrupted
>  Oops: 0010 [1] SMP
>  CPU 0
>
> with:
>
>   http://redhat.com/~mingo/misc/config-Thu_Jun_26_12_46_46_CEST_2008.bad
>

Use SWAPGS_UNSAFE_STACK in ia32entry.S in the places where the active
stack is the usermode stack.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move fix mapping page table range early

do that in init_memory_mapping

also remove one init_ohci1394_dma_on_all_controllers

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: clean up ARCH_SETUP

asm-x86/paravirt.h already have protection with CONFIG_PARAVIRT inside

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: limit E820 map when a user-defined memory map is specified

This patch brings back limiting of the E820 map when a user-defined
E820 map is specified. While the behaviour of i386 (32 bit) was to limit
the E820 map (and /proc/iomem), the behaviour of x86-64 (64 bit) was not to
limit.

That patch limits the E820 map again for both x86 architectures.

Code was tested for compilation and booting on a 32 bit and 64 bit system.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: kexec@lists.infradead.org
Cc: vgoyal@redhat.com
Cc: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix pte allocation in "x86: introduce init_memory_mapping for 32bit"

The patch "x86: introduce init_memory_mapping for 32bit" does not allocate
enough space for PTEs if the CPU does not implement PSE.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/paravirt, 64-bit: make load_gs_index() a paravirt operation

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/paravirt, 64-bit: add adjust_exception_frame

64-bit Xen pushes a couple of extra words onto an exception frame.
Add a hook to deal with them.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: swapgs pvop with a user-stack can never be called

It's never safe to call a swapgs pvop when the user stack is current -
it must be inline replaced.  Rather than making a call, the
SWAPGS_UNSAFE_STACK pvop always just puts "swapgs" as a placeholder,
which must either be replaced inline or trap'n'emulated (somehow).

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: ia32entry: replace privileged instructions with pvops

Replace privileged instructions with the corresponding pvops in
ia32entry.S.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/paravirt: add sysret/sysexit pvops for returning to 32-bit compatibility userspace

In a 64-bit system, we need separate sysret/sysexit operations to
return to a 32-bit userspace.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/paravirt, 64-bit: don't restore user rsp within sysret

There's no need to combine restoring the user rsp within the sysret
pvop, so split it out.  This makes the pvop's semantics closer to the
machine instruction.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/paravirt: split sysret and sysexit

Don't conflate sysret and sysexit; they're different instructions with
different semantics, and may be in use at the same time (at least
within the same kernel, depending on whether its an Intel or AMD
system).

sysexit - just return to userspace, does no register restoration of
    any kind; must explicitly atomically enable interrupts.

sysret - reloads flags from r11, so no need to explicitly enable
    interrupts on 64-bit, responsible for restoring usermode %gs

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use __KERNEL_DS as SS when returning to a kernel thread

This is needed when the kernel is running on RING3, such as under Xen.
x86_64 has a weird feature that makes it #GP on iret when SS is a null
descriptor.

This need to be tested on bare metal to make sure it doesn't cause any
problems. AMD specs say SS is always ignored (except on iret?).

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: save %fs and %gs before load_TLS() and arch_leave_lazy_cpu_mode()

We must do this because load_TLS() may need to clear %fs and %gs.
(e.g. under Xen).

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: __switch_to(): move arch_leave_lazy_cpu_mode() to the right place

We must leave lazy mode before switching the %fs and %gs selectors.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: split set_pte_vaddr()

We will need to set a pte on l3_user_pgt. Extract set_pte_vaddr_pud()
from set_pte_vaddr(), that will accept the l3 page table as parameter.

This change should be a no-op for existing code.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: PSE no longer a hard requirement

Because Xen doesn't support PSE mappings in guests, all code which
assumed the presence of PSE has been changed to fall back to smaller
mappings if necessary.  As a result, PSE is optional rather than
required (though still used whereever possible).

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: create small vmemmap mappings if PSE not available

If PSE is not available, then fall back to 4k page mappings for the
vmemmap area.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: adjust mapping of physical pagetables to work with Xen

This makes a few of changes to the construction of the initial
pagetables to work better with paravirt_ops/Xen.  The main areas
are:

 1. Support non-PSE mapping of memory, since Xen doesn't currently
    allow 2M pages to be mapped in guests.

 2. Make sure that the ioremap alias of all pages are dropped before
    attaching the new page to the pagetable.  This avoids having
    writable aliases of pagetable pages.

 3. Preserve existing pagetable entries, rather than overwriting.  Its
    possible that a fair amount of pagetable has already been constructed,
    so reuse what's already in place rather than ignoring and overwriting it.

The algorithm relies on the invariant that any page which is part of
the kernel pagetable is itself mapped in the linear memory area.  This
way, it can avoid using ioremap on a pagetable page.

The invariant holds because it maps memory from low to high addresses,
and also allocates memory from low to high.  Each allocated page can
map at least 2M of address space, so the mapped area will always
progress much faster than the allocated area.  It relies on the early
boot code mapping enough pages to get started.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: split x86_64_start_kernel

Split x86_64_start_kernel() into two pieces:

   The first essentially cleans up after head_64.S.  It clears the
   bss, zaps low identity mappings, sets up some early exception
   handlers.

   The second part preserves the boot data, reserves the kernel's
   text/data/bss, pagetables and ramdisk, and then starts the kernel
   proper.

This split is so that Xen can call the second part to do the set up it
needs done.  It doesn't need any of the first part setups, because it
doesn't boot via head_64.S, and its redundant or actively damaging.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: add FIX_PARAVIRT_BOOTMAP fixmap slot

This matches 32 bit.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

paravirt/x86, 64-bit: move __PAGE_OFFSET to leave a space for hypervisor

Set __PAGE_OFFSET to the most negative possible address +
16*PGDIR_SIZE.  The gap is to allow a space for a hypervisor to fit.
The gap is more or less arbitrary, but it's what Xen needs.

When booting native, kernel/head_64.S has a set of compile-time
generated pagetables used at boot time.  This patch removes their
absolutely hard-coded layout, and makes it parameterised on
__PAGE_OFFSET (and __START_KERNEL_map).

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/paravirt: define PARA_INDIRECT for indirect asm calls

On 32-bit it's best to use a %cs: prefix to access memory where the
other segments may not bet set up properly yet.  On 64-bit it's best
to use a rip-relative addressing mode.  Define PARA_INDIRECT() to
abstract this and generate the proper addressing mode in each case.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/paravirt: add debugging for missing operations

Rather than just jumping to 0 when there's a missing operation, raise a BUG.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: preallocate and prepopulate separately

Jan Beulich points out that vmalloc_sync_all() assumes that the
kernel's pmd is always expected to be present in the pgd.  The current
pgd construction code will add the pgd to the pgd_list before its pmds
have been pre-populated, thereby making it visible to
vmalloc_sync_all().

However, because pgd_prepopulate_pmd also does the allocation, it may
block and cannot be done under spinlock.

The solution is to preallocate the pmds out of the spinlock, then
populate them while holding the pgd_list lock.

This patch also pulls the pmd preallocation and mop-up functions out
to be common, assuming that the compiler will generate no code for
them when PREALLOCTED_PMDS is 0.  Also, there's no need for pgd_ctor
to clear the pgd again, since it's allocated as a zeroed page.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86/paravirt: add a pgd_alloc/free hooks

Add hooks which are called at pgd_alloc/free time.  The pgd_alloc hook
may return an error code, which if non-zero, causes the pgd allocation
to be failed.  The hooks may be used to allocate/free auxillary
per-pgd information.

also fix:

> * Ingo Molnar <mingo@elte.hu> wrote:
>
>  include/asm/pgalloc.h: In function ‘paravirt_pgd_free':
>  include/asm/pgalloc.h:14: error: parameter name omitted
>  arch/x86/kernel/entry_64.S: In file included from
>  arch/x86/kernel/traps_64.c:51:include/asm/pgalloc.h: In function ‘paravirt_pgd_free':
>  include/asm/pgalloc.h:14: error: parameter name omitted

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: simplify vmalloc_sync_all

vmalloc_sync_all() is only called from register_die_notifier and
alloc_vm_area.  Neither is on any performance-critical paths, so
vmalloc_sync_all() itself is not on any hot paths.

Given that the optimisations in vmalloc_sync_all add a fair amount of
code and complexity, and are fairly hard to evaluate for correctness,
it's better to just remove them to simplify the code rather than worry
about its absolute performance.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: add sync_cmpxchg

Add sync_cmpxchg to match 32-bit's sync_cmpxchg.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: add prototype for x86_64_start_kernel()

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: build fix

fix:

In file included from arch/x86/kernel/setup.c:118:
include/asm/highmem.h:64: error: expected identifier or ‘(' before ‘do'
include/asm/highmem.h:64: error: expected identifier or ‘(' before ‘while'
include/asm/highmem.h:67: error: expected identifier or ‘(' before ‘do'
include/asm/highmem.h:67: error: expected identifier or ‘(' before ‘while'

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove extra newline from setup.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: we only have init_pg_tables_end for 32bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: change some functions in setup.c to static

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: make x86_find_smp_config depends on 64 bit too

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move parse elfvorehdr back to setup.c

Signed-off-by: Yinghai <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move reserve_standard_io_resources back to setup.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move back crashkernel back to setup.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move parse_setup_data back to setup.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: move boot_params back to setup.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: rename setup_32.c to setup.c

and let 64 bit use that instead of setup_64.c

[ mingo@elte.hu ]

x86: build fix

fix:

arch/x86/kernel/setup.c: In function ‘setup_arch':
arch/x86/kernel/setup.c:561: error: implicit declaration of function ‘efi_reserve_early'

and:

arch/x86/kernel/setup.c:766: error: implicit declaration of function 'init_cpu_to_node'

and:

arch/x86/kernel/setup.c:676: warning: operation on 'max_pfn_mapped' may be undefined

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: space to tab in setup_arch

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge 64bit setup_arch into setup_32

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add extra includes for 64bit support

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: put global variable for 32bit all together

those variables are not needed by 64 bit.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: update reserve_initrd to support 64bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: we can use full bootmem after have init_memory_mapping

So remove outdated comments

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: rename setup.c to setup_percpu.c

some functions need to be moved to setup_numa.c
after we merge setup32/64.c, some funcs need to be moved back to setup.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix memory setup bug

interesting...

[    0.000000]   mapped low ram: 0 - 20000000
[    0.000000]   low ram: 00000000 - 1fff0000
[    0.000000]   bootmap 00002000 - 00006000

max_pfn_mapped > max_low_pfn?

it seems init_memory_mapping reveals an old bug.

please check attached test patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, crashdump, /proc/vmcore: remove CONFIG_EXPERIMENTAL from kdump

I would suggest to remove the "experimental" status from Kdump.
Kdump is now in the kernel since a long time and used by Enterprise
distributions. I don't think that "experimental" is true any more.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: vgoyal@redhat.com
Cc: kexec@lists.infradead.org
Cc: Bernhard Walle <bwalle@suse.de>
Cc: akpm@linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86 boot: only pick up additional EFI memmap if add_efi_memmap flag

Applies on top of the previous patch:
  x86 boot: add code to add BIOS provided EFI memory entries to kernel

Instead of always adding EFI memory map entries (if present) to the
memory map after initially finding either E820 BIOS memory map entries
and/or kernel command line memmap entries, -instead- only add such
additional EFI memory map entries if the kernel boot option:

    add_efi_memmap

is specified.

Requiring this 'add_efi_memmap' option is backward compatible with
kernels that didn't load such additional EFI memory map entries in
the first place, and it doesn't override a configuration that tries
to replace all E820 or EFI BIOS memory map entries with ones given
entirely on the kernel command line.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Cc: "Jack Steiner" <steiner@sgi.com>
Cc: "Mike Travis" <travis@sgi.com>
Cc: "Huang
Cc: Ying" <ying.huang@intel.com>
Cc: "Andi Kleen" <andi@firstfloor.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

mm, generic, x86 boot: more tweaks to hex prints of some pfn addresses

Fix some problems with (and applies on top of) a previous patch:
  x86 boot: show pfn addresses in hex not decimal in some kernel info printks

Primarily change "0x%8lx" format, which displays with a right aligned
space filled hex number (spaces between the "0x" prefix and the number),
into "%0#10lx" format, which zero fills instead of space fills, and
which uses the printf flag '#' to request the "0x" prefix instead of
hard coding it.

Also replace some other "0x%lx" formats with "%#lx", making use of the
'#' printf flag again.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Cc: "Jack Steiner" <steiner@sgi.com>
Cc: "Mike Travis" <travis@sgi.com>
Cc: "Huang
Cc: Ying" <ying.huang@intel.com>
Cc: "Andi Kleen" <andi@firstfloor.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: cleanup e820_setup_gap(), add e820_search_gap(), v2

This is a preparatory patch for the next patch in series.
Moves some code from e820_setup_gap to a new function e820_search_gap.
This patch is a part of a bug fix where we walk the ACPI table to calculate
a gap for PCI optional devices.

v1->v2: Patch on top of tip/master.
Fixes a bug introduced in the last patch about the typeof "last".
Also the new function e820_search_gap now returns if we found a gap in
e820_map.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: lenb@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove end_pfn in 64bit

and use max_pfn directly.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: numa 32 using apicid_2_node to get node for logical_apicid

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: change size if e820_update/remove_range

in case someone using crazy parameter while calling them.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: add table_top check for alloc_low_page in 64 bit

that range is from find_e820_area, so don't try to use end_pfn to see
if out of boundary...use table_top instead to avoid possible strange
result while cross the boundary...

also change early_printk to printk, because init_memory_mapping is after
early param parsing, and console=uart8250 already working at that time.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: get max_pfn_mapped in init_memory_mapping

so don't shift that in the loop

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix e820_update_range size when overlapping

before that we relay on sanitize_e820_map to remove the overlap.

but e820_update_range(,,E820_RESERVED, E820_RAM) will not work

this patch fix that

who is going to use this?

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: introduce init_memory_mapping for 32bit #3

move kva related early backto initmem_init for numa32

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: introduce init_memory_mapping for 32bit #2

moving relocate_initrd early

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: introduce init_memory_mapping for 32bit #1

... so can we use mem below max_low_pfn earlier.

this allows us to move several functions more early instead of waiting
to after paging_init.

That includes moving relocate_initrd() earlier in the bootup, and kva
related early setup done in initmem_init. (in followup patches)

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: unify mmu_context.h

Some amount of asm-x86/mmu_context.h can be unified, including
activate_mm paravirt hook.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: unify pgd_index

pgd_index is common for 32 and 64-bit, so move it to a common place.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: use __pgd() on mk_kernel_pgd()

Use __pgd() on mk_kernel_pgd()

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: add gate_offset() and gate_segment() macros

For calculating the offset from struct gate_struct fields.

[ gate_offset and gate_segment were broken for 32-bit. ]

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: unify early_ioremap

The 32-bit early_ioremap will work equally well for 64-bit, so just use it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: use p??_populate() to attach pages to pagetable

Use the _populate() functions to attach new pages to a pagetable, to
make sure the right paravirt_ops calls get called.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, 64-bit: use write_gdt_entry in vsyscall_set_cpu

Use write_gdt_entry to generate the special vgetcpu descriptor in the
vsyscall page.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove open-coded save/load segment operations

This removes a pile of buggy open-coded implementations of savesegment
and loadsegment.

(They are buggy because they don't have memory barriers to prevent
them from being reordered with respect to memory accesses.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>