]> pilppa.com Git - linux-2.6-omap-h63xx.git/log
linux-2.6-omap-h63xx.git
16 years ago[NET] smc91x: Make smc91x use IRQ resource trigger flags
Russell King [Mon, 14 Jan 2008 22:30:10 +0000 (22:30 +0000)]
[NET] smc91x: Make smc91x use IRQ resource trigger flags

smc91x is shared between many different platforms.  Each platform needs
to specify the interrupt type, and in some cases the irq type depends
on more than just the build configuration - it depends on runtime
checks.

Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide
a way for these flags to be passed via the IRQ resource itself.

Note that IRQF_TRIGGER_* constants are intentionally defined to correspond
with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that
the low bits of PCI iomem resources correspond with the BAR flag bits.

Also provide a way to configure smc91x to read the IRQ flags from the
resource.  Once all platforms have been converted over (signified
by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should
be removed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
16 years ago[ARM] pxa: add default config for littleton
eric miao [Fri, 21 Dec 2007 03:18:48 +0000 (11:18 +0800)]
[ARM] pxa: add default config for littleton

default to

- PXA300/PXA310 support only (there isn't any littleton board with PXA320
  processor for now)

- smc91x ethernet support with NFS rootfs

- LCD framebuffer support with graphics console

Signed-off-by: eric miao <eric.miao>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)
eric miao [Thu, 13 Dec 2007 02:41:43 +0000 (10:41 +0800)]
[ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4664/1: Add basic support for HTC Magician PDA phones
Philipp Zabel [Thu, 22 Nov 2007 16:59:11 +0000 (17:59 +0100)]
[ARM] 4664/1: Add basic support for HTC Magician PDA phones

This includes irda, gpio keys, pxafb, backlight, ohci and flash
(read-only).

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.
Ian Molton [Mon, 19 Nov 2007 12:16:56 +0000 (13:16 +0100)]
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.

This patch contains the base code to boot the Toshiba e330, e740,
e750, e400, and e800 PDAs.

Signed-off-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: skip registers saving/restoring if entering standby mode
eric miao [Mon, 14 Jan 2008 07:50:54 +0000 (15:50 +0800)]
[ARM] pxa: skip registers saving/restoring if entering standby mode

registers are retained during standby mode, thus it's not necessary
to save/restore and checksum

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: fix PXA27x resume
Russell King [Wed, 23 Jan 2008 12:34:16 +0000 (12:34 +0000)]
[ARM] pxa: fix PXA27x resume

When PXA27x wakes up, tick_resume_oneshot() tries to set a timer
interrupt to occur immediately.  Since PXA27x requires at least
MIN_OSCR_DELTA, this causes us to flag an error.

tick_program_event() then increments the next event time by
min_delta_ns.  However, by the time we get back to programming
the next event, the OSCR has incremented such that we fail again.
We repeatedly retry, but the OSCR is too fast for us - we never
catch up, so we never break out of the loop - resulting in us
never apparantly resuming.

Fix this by doubling min_delta_ns.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: Avoid fiddling with CKEN register on suspend
Russell King [Wed, 23 Jan 2008 12:33:31 +0000 (12:33 +0000)]
[ARM] pxa: Avoid fiddling with CKEN register on suspend

The PXA manuals indicate that when in standby or sleep modes, clocks to
peripherals are shut off by the processor itself.  Eg:

PXA270 standby: "In standby mode, all clocks are disabled except those
 for the power manager and the RTC."

PXA270 sleep: "In sleep mode, all clocks are disabled to the processor
 and to all peripherals except the RTC."

PXA255 sleep: "In Sleep Mode, all processor and peripheral clocks are
 disabled, except the RTC."

Therefore, it should be safe to leave the clock enable register alone
prior to entering low power modes for these SoCs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme
Russell King [Mon, 7 Jan 2008 22:18:30 +0000 (22:18 +0000)]
[ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme

Wakeup sources on PXA3 are enabled at two levels.  First, the MFP
configuration has to be set to enable which edges a specific pin
will trigger a wakeup.  The pin also has to be routed to a functional
unit.  Lastly, the functional unit must be enabled as a wakeup source
in the appropriate AD*ER registers (AD2D0ER for standby resume.)

This doesn't fit well with the IRQ wake scheme - we currently do a
best effort conversion from IRQ numbers to functional unit wake enable
bits.  For instance, there's several USB client related enable bits but
there's no corresponding IRQs to determine which you'd want.  Conversely,
there's a single enable bit covering several functional units.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: Add zylonite MFP wakeup configurations
Russell King [Tue, 8 Jan 2008 15:25:01 +0000 (15:25 +0000)]
[ARM] pxa: Add zylonite MFP wakeup configurations

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: program MFPs for low power mode when suspending
Russell King [Tue, 8 Jan 2008 15:12:22 +0000 (15:12 +0000)]
[ARM] pxa: program MFPs for low power mode when suspending

Hook the MFP code into the power management code so that the MFPs can
be reconfigured when suspending and resuming.  However, note the FIXME
- low power mode MFP configuration may depend on the system state being
entered.

Also note that we have to clear any detected edge events prior to
entering a low power mode - otherwise we immediately wake up.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: make MFP configuration processor independent
eric miao [Thu, 3 Jan 2008 03:25:56 +0000 (11:25 +0800)]
[ARM] pxa: make MFP configuration processor independent

There are two reasons for making the MFP configuration to be processor
independent, i.e. removing the relationship of configuration bits with
actual MFPR register settings:

   1. power management sometimes requires the MFP to be configured
      differently when in run mode or in low power mode

   2. for future integration of pxa{25x,27x} GPIO configurations

The modifications include:

1. introducing of processor independent MFP configuration bits, as
   defined in [include/asm-arm/arch-pxa/mfp.h]:

bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
bit 10..12 - Alternate Function Selection
bit 13..15 - Drive Strength
bit 16..18 - Low Power Mode State
bit 19..20 - Low Power Mode Edge Detection
bit 21..22 - Run Mode Pull State
and so on,

2. moving the processor dependent code from mfp.h into mfp-pxa3xx.h

3. cleaning up of the MFPR bit definitions

4. mapping of processor independent MFP configuration into processor
   specific MFPR register settings is now totally encapsulated within
   pxa3xx_mfp_config()

5. using of "unsigned long" instead of invented type of "mfp_cfg_t"
   according to Documentation/CodingStyle Chapter 5, usage of this
   in platform code will be slowly removed in later patches

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions
eric miao [Wed, 2 Jan 2008 09:34:27 +0000 (17:34 +0800)]
[ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions

pxa3xx_mfp_set_xxx() functions are originally provided for overwriting
MFP configurations performed by pxa3xx_mfp_config(), the usage of such
a dirtry trick is not recommended, since there is currently no user of
these functions, they are safely removed

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: introduce a new file mfp-pxa3xx.h for common pin configurations
eric miao [Wed, 2 Jan 2008 08:45:06 +0000 (16:45 +0800)]
[ARM] pxa: introduce a new file mfp-pxa3xx.h for common pin configurations

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: omit PXA25x or PXA27x standby/sleep code as appropriate
Russell King [Fri, 4 Jan 2008 22:43:36 +0000 (22:43 +0000)]
[ARM] pxa: omit PXA25x or PXA27x standby/sleep code as appropriate

There's no point building standby/sleep code for processors which
aren't configured.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: clean up pxa{27x,25x}_init_pm() to empty if CONFIG_PM not defined
eric miao [Wed, 2 Jan 2008 00:24:49 +0000 (08:24 +0800)]
[ARM] pxa: clean up pxa{27x,25x}_init_pm() to empty if CONFIG_PM not defined

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: move memory controller registers into pxa2xx-regs.h
Russell King [Mon, 14 Jan 2008 17:02:33 +0000 (17:02 +0000)]
[ARM] pxa: move memory controller registers into pxa2xx-regs.h

PXA3 has a different memory controller from PXA2 platforms.  Avoid
clashing definitions by moving the PXA2 definitions to pxa2xx-regs.h

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: increase size of memory mapping
Russell King [Fri, 4 Jan 2008 22:41:09 +0000 (22:41 +0000)]
[ARM] pxa: increase size of memory mapping

The mapping for physical address 0x48000000 is not sufficient
to allow access to the dynamic memory controller configuration
registers on PXA3.  These registers need to be accessed to
reconfigure the SDRAM when waking from a low power mode.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: move pxa27x_device_ohci out of pxa27x.c for use with pxa3xx
eric miao [Wed, 12 Dec 2007 01:29:33 +0000 (09:29 +0800)]
[ARM] pxa: move pxa27x_device_ohci out of pxa27x.c for use with pxa3xx

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] USB: update to allow pxa27x ohci driver to support pxa3xx
eric miao [Wed, 12 Dec 2007 01:07:47 +0000 (09:07 +0800)]
[ARM] USB: update to allow pxa27x ohci driver to support pxa3xx

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] USB: update pxa27x ohci driver to use clk support
eric miao [Wed, 12 Dec 2007 00:53:25 +0000 (08:53 +0800)]
[ARM] USB: update pxa27x ohci driver to use clk support

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: make OHCI register definitions available to both pxa27x and pxa3xx
eric miao [Tue, 25 Dec 2007 02:34:33 +0000 (10:34 +0800)]
[ARM] pxa: make OHCI register definitions available to both pxa27x and pxa3xx

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: add clk of CKEN_USBHOST for pxa3xx
eric miao [Wed, 12 Dec 2007 01:32:01 +0000 (09:32 +0800)]
[ARM] pxa: add clk of CKEN_USBHOST for pxa3xx

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: ensure SSP TX FIFO is empty instead of not full for pxa3xx
eric miao [Fri, 23 Nov 2007 06:55:59 +0000 (14:55 +0800)]
[ARM] pxa: ensure SSP TX FIFO is empty instead of not full for pxa3xx

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: mmc: add 3rd host controller support for pxa310
Bridge Wu [Fri, 21 Dec 2007 11:27:08 +0000 (19:27 +0800)]
[ARM] pxa: mmc: add 3rd host controller support for pxa310

This patch is to add the third mmc controller support _only_
for pxa310.

On zylonite, the third controller support one slot.

Signed-off-by: Bridge Wu <bridge.wu@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: mmc: add 2nd host controller support for pxa3xx
Bridge Wu [Fri, 21 Dec 2007 11:15:36 +0000 (19:15 +0800)]
[ARM] pxa: mmc: add 2nd host controller support for pxa3xx

This patch is to add the second mmc controller support for pxa3xx.
It's valid for pxa3[0|1|2]0.

On zylonite, the second controller has no slot.

Signed-off-by: Bridge Wu <bridge.wu@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: mmc: add 1st host controller support for pxa3xx
Bridge Wu [Fri, 21 Dec 2007 11:00:13 +0000 (19:00 +0800)]
[ARM] pxa: mmc: add 1st host controller support for pxa3xx

This patchis to add the first mmc controller support for pxa3xx.
It's valid for pxa3[0|1|2]0.

On zylonite, the first controller supports two slots, this patch
only support the first one right now.

Signed-off-by: Bridge Wu <bridge.wu@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: create arch/arm/mach-pxa/device.c for all on-chip devices
eric miao [Wed, 19 Dec 2007 09:14:02 +0000 (17:14 +0800)]
[ARM] pxa: create arch/arm/mach-pxa/device.c for all on-chip devices

Considering that generic.c is getting more and more bloated by device
information, moving that part out side will be much cleaner.

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4718/1: Fix redefinition warnings in PXA uncompressor code
Philipp Zabel [Fri, 21 Dec 2007 08:31:25 +0000 (09:31 +0100)]
[ARM] 4718/1: Fix redefinition warnings in PXA uncompressor code

FFUART and friends are already defined as __REG(x) in pxa-regs.h.
Instead of redefining them here, we can just provide the __REG macro.
Including asm/arch/hardware.h is not an option because this physical
addresses are needed here.
This is a fix for the compiler warnings generated by 4663/1.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4711/1: pxa: mmc: move DMA specific code to platform layer
Bridge Wu [Fri, 14 Dec 2007 09:40:25 +0000 (10:40 +0100)]
[ARM] 4711/1: pxa: mmc: move DMA specific code to platform layer

This patch is to move pxamci DMA specific code to corresponding
platform layer because using DRCMRRXMMC/DRCMRTXMMC in pxamci.c makes
the driver code dedicated to platform which is not extensible.

It is applicable to all pxa platforms.

Signed-off-by: Bridge Wu <bridge.wu@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4709/1: pxa: mmc: add 26MHz support for pxa3[0|1]0 mmc controller
Bridge Wu [Thu, 13 Dec 2007 06:24:30 +0000 (07:24 +0100)]
[ARM] 4709/1: pxa: mmc: add 26MHz support for pxa3[0|1]0 mmc controller

pxa3[0|1]0 mmc controller can support 26MHz clock mode, they support
SD spec 1.1 and MMC spec 4.0 which specify high speed mode. So host
caps will include MMC_CAP_MMC_HIGHSPEED and MMC_CAP_SD_HIGHSPEED for
pxa3[0|1]0.

This patch is to add 26MHz support for them. pxa host clock will be
set to 26MHz mode when the card supported max clock rate is higher
than or equal to 26MHz.

Signed-off-by: Bridge Wu <bridge.wu@marvell.com>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: add cpufreq support
Russell King [Fri, 14 Dec 2007 13:30:14 +0000 (13:30 +0000)]
[ARM] pxa: add cpufreq support

There have been patches hanging around for ages to add support for
cpufreq to PXA255 processors.  It's about time we applied one.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: initialise SSP earlier
Russell King [Mon, 10 Dec 2007 15:35:54 +0000 (15:35 +0000)]
[ARM] pxa: initialise SSP earlier

Initialise the SSP driver at arch_initcall() time, so it's available
for other drivers to use it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: only register "cpld_irq" for the correct platform
Russell King [Mon, 10 Dec 2007 13:33:06 +0000 (13:33 +0000)]
[ARM] pxa: only register "cpld_irq" for the correct platform

Only register the "cpld_irq" sysclass for mainstone/lubbock if we're
running on one of those platforms.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()
eric miao [Wed, 21 Nov 2007 10:50:53 +0000 (18:50 +0800)]
[ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free()

1. make pxa2xx_spi.c use ssp_request() and ssp_free() to get the common
   information of the designated SSP port.

2. remove those IRQ/memory request code, ssp_request() has done that for
   the driver

3. the SPI platform device is thus made psuedo, no resource (memory/IRQ)
   has to be defined, all will be retreived by ssp_request()

4. introduce ssp_get_clk_div() to handle controller difference in clock
   divisor setting

5. use clk_xxx() API for clock enable/disable, and clk_get_rate() to
   handle the different SSP clock frequency between different processors

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: use __raw_writel()/__raw_readl() for ssp_xxxx()
eric miao [Fri, 30 Nov 2007 10:26:56 +0000 (18:26 +0800)]
[ARM] pxa: use __raw_writel()/__raw_readl() for ssp_xxxx()

1. change SSP register definitions from absolute virtual addresses to
   offsets

2. use __raw_writel()/__raw_readl() for functions of ssp_xxxx()

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: move SSP register definitions from pxa-regs.h to regs-ssp.h
eric miao [Wed, 21 Nov 2007 08:57:12 +0000 (16:57 +0800)]
[ARM] pxa: move SSP register definitions from pxa-regs.h to regs-ssp.h

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: define "struct ssp_device" and add ssp_request()/ssp_free()
eric miao [Thu, 6 Dec 2007 09:56:42 +0000 (17:56 +0800)]
[ARM] pxa: define "struct ssp_device" and add ssp_request()/ssp_free()

1. define "struct ssp_device" for SSP information, which is requested
   and released by function ssp_request()/ssp_free()

2. modify the ssp_init() and ssp_exit() to use the interface

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: add ssp devices and clk support for pxa25x/pxa27x/pxa3xx
eric miao [Mon, 10 Dec 2007 09:54:36 +0000 (17:54 +0800)]
[ARM] pxa: add ssp devices and clk support for pxa25x/pxa27x/pxa3xx

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: define SSP platform devices for pxa2xx/pxa3xx
eric miao [Mon, 10 Dec 2007 09:51:29 +0000 (17:51 +0800)]
[ARM] pxa: define SSP platform devices for pxa2xx/pxa3xx

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4663/1: Only putc uncompressor output into FFUART if it was enabled by the...
Philipp Zabel [Thu, 22 Nov 2007 16:57:30 +0000 (17:57 +0100)]
[ARM] 4663/1: Only putc uncompressor output into FFUART if it was enabled by the bootloader

Also, use existing register and bit definitions instead of numbers.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa/sa1100: replace wakeup support
Russell King [Mon, 12 Nov 2007 22:49:58 +0000 (22:49 +0000)]
[ARM] pxa/sa1100: replace wakeup support

Replace wakeup support using the alarm via the SA1100 RTC driver on
SA1100 and PXA platforms.  This allows RTC alarm wakeup to be enabled
via sysfs using the conventional attributes.

Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: Don't wind OSCR backwards over suspend/resume
Russell King [Mon, 12 Nov 2007 22:48:12 +0000 (22:48 +0000)]
[ARM] pxa: Don't wind OSCR backwards over suspend/resume

OSCR is supposed to monotonically increment; however restoring it
to a time prior to OSMR0 may result in it being wound backwards.
Instead, if OSMR0 is within the minimum expiry time, wind OSMR0
forwards.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: remove periodic mode emulation support
Russell King [Mon, 12 Nov 2007 22:45:16 +0000 (22:45 +0000)]
[ARM] pxa: remove periodic mode emulation support

Apparantly, the generic time subsystem can accurately emulate periodic
mode via the one-shot support code, so we don't need our own periodic
emulation code anymore.  Just ensure that we build support for one shot
into the generic time subsystem.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: mainstone: update backlight to use the backlight infrastructure
Russell King [Thu, 8 Nov 2007 11:22:48 +0000 (11:22 +0000)]
[ARM] pxa: mainstone: update backlight to use the backlight infrastructure

Linux has framebuffer backlight support infrastructure which should
be used to expose backlight attributes.  Mainstone should use it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] pxa: avoid always registering MMC, I2C, IrDA and framebuffer devices
Russell King [Thu, 8 Nov 2007 11:17:19 +0000 (11:17 +0000)]
[ARM] pxa: avoid always registering MMC, I2C, IrDA and framebuffer devices

Only register the MMC, framebuffer, I2C and FICP devices when the
platform supplies the necessary platform data structures for the
devices.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] Update mach-types
Russell King [Sat, 26 Jan 2008 14:47:48 +0000 (14:47 +0000)]
[ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Linus Torvalds [Sat, 26 Jan 2008 01:19:08 +0000 (17:19 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits)
  [SCSI] usbstorage: use last_sector_bug flag universally
  [SCSI] libsas: abstract STP task status into a function
  [SCSI] ultrastor: clean up inline asm warnings
  [SCSI] aic7xxx: fix firmware build
  [SCSI] aacraid: fib context lock for management ioctls
  [SCSI] ch: remove forward declarations
  [SCSI] ch: fix device minor number management bug
  [SCSI] ch: handle class_device_create failure properly
  [SCSI] NCR5380: fix section mismatch
  [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices
  [SCSI] IB/iSER: add logical unit reset support
  [SCSI] don't use __GFP_DMA for sense buffers if not required
  [SCSI] use dynamically allocated sense buffer
  [SCSI] scsi.h: add macro for enclosure bit of inquiry data
  [SCSI] sd: add fix for devices with last sector access problems
  [SCSI] fix pcmcia compile problem
  [SCSI] aacraid: add Voodoo Lite class of cards.
  [SCSI] aacraid: add new driver features flags
  [SCSI] qla2xxx: Update version number to 8.02.00-k7.
  [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command.
  ...

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Sat, 26 Jan 2008 01:15:23 +0000 (17:15 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is m

16 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Sat, 26 Jan 2008 01:11:13 +0000 (17:11 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (31 commits)
  ocfs2: clean up bh null checks
  ocfs2: document access rules for blocked_lock_list
  configfs: file.c fix possible recursive locking
  configfs: dir.c fix possible recursive locking
  configfs: Remove EXPERIMENTAL
  ocfs2: bump version number
  ocfs2/dlm: Clear joining_node on hearbeat node down
  ocfs2: convert byte order of constant instead of variable
  ocfs2: Update default cluster timeouts
  ocfs2: printf fixes
  ocfs2: Use generic_file_llseek
  ocfs2: Safer read_inline_data()
  ocfs2: Silence false lockdep warnings
  [PATCH 2/2] ocfs2: cluster aware flock()
  [PATCH 1/2] ocfs2: add flock lock type
  ocfs2: Local alloc window size changeable via mount option
  ocfs2: Support commit= mount option
  ocfs2: Add missing permission checks
  [PATCH 2/2] ocfs2: Implement group add for online resize
  [PATCH 1/2] ocfs2: Add group extend for online resize
  ...

16 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Sat, 26 Jan 2008 01:08:28 +0000 (17:08 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (67 commits)
  fix drivers/ata/sata_fsl.c double-decl
  [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()
  pata_legacy: Merge winbond support
  ata_generic: Cenatek support
  pata_winbond: error return
  pata_serverworks: Fix cable types and cosmetics
  pata_mpc52xx: remove un-needed assignment
  libata: fix off-by-one in error categorization
  ahci: factor out AHCI enabling and enable AHCI before reading CAP
  ata_piix: implement SIDPR SCR access
  ata_piix: convert to prepare - activate initialization
  libata: factor out ata_pci_activate_sff_host() from ata_pci_one()
  [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()
  pata_legacy: resychronize with upstream changes and resubmit
  [libata] pata_legacy: typo fix
  [libata] pata_winbond: update for new ->data_xfer hook
  pata_pcmcia: convert to new data_xfer prototype
  libata annotations and fixes
  libata: use dev_driver_string() instead of "libata" in libata-sff.c
  ata_piix: kill unused constants and flags
  ...

16 years agoocfs2: clean up bh null checks
Mark Fasheh [Thu, 24 Jan 2008 02:35:31 +0000 (18:35 -0800)]
ocfs2: clean up bh null checks

If we know a buffer_head is non-null, then brelse() is unnecessary and
put_bh() can be used instead. Also, an explicit check for NULL is
unnecessary when using brelse(). This patch only covers buffer_head_io.c and
resize.c, which have recently added code which exhibits this problem.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: document access rules for blocked_lock_list
Mark Fasheh [Thu, 24 Jan 2008 00:54:48 +0000 (16:54 -0800)]
ocfs2: document access rules for blocked_lock_list

ocfs2_super->blocked_lock_list and ocfs2_super->blocked_lock_count have some
usage restrictions which aren't immediately obvious to anyone reading the
code. It's a good idea to document this so that we avoid making costly
mistakes in the future.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoconfigfs: file.c fix possible recursive locking
Joonwoo Park [Wed, 26 Dec 2007 03:09:57 +0000 (12:09 +0900)]
configfs: file.c fix possible recursive locking

configfs_register_subsystem() with default_groups triggers recursive locking.
it seems that mutex_lock_nested is needed.

=============================================
[ INFO: possible recursive locking detected ]
2.6.24-rc6 #145
---------------------------------------------
swapper/1 is trying to acquire lock:
 (&sb->s_type->i_mutex_key#3){--..}, at: [<c40c9a9e>] configfs_add_file+0x2e/0x70

but task is already holding lock:
 (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca985>] configfs_register_subsystem+0x55/0x130

other info that might help us debug this:
1 lock held by swapper/1:
 #0:  (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca985>] configfs_register_subsystem+0x55/0x130

stack backtrace:
Pid: 1, comm: swapper Not tainted 2.6.24-rc6 #145
 [<c40053ba>] show_trace_log_lvl+0x1a/0x30
 [<c4005e82>] show_trace+0x12/0x20
 [<c400687e>] dump_stack+0x6e/0x80
 [<c404ec72>] __lock_acquire+0xe62/0x1120
 [<c404efb2>] lock_acquire+0x82/0xa0
 [<c43fda88>] mutex_lock_nested+0x98/0x2e0
 [<c40c9a9e>] configfs_add_file+0x2e/0x70
 [<c40c9b0c>] configfs_create_file+0x2c/0x40
 [<c40ca639>] configfs_attach_item+0x139/0x220
 [<c40ca734>] configfs_attach_group+0x14/0x140
 [<c40ca7e9>] configfs_attach_group+0xc9/0x140
 [<c40ca9f6>] configfs_register_subsystem+0xc6/0x130
 [<c45c8186>] init_netconsole+0x2b6/0x300
 [<c45a75f2>] kernel_init+0x142/0x320
 [<c4004fb3>] kernel_thread_helper+0x7/0x14
 =======================

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoconfigfs: dir.c fix possible recursive locking
Joonwoo Park [Wed, 26 Dec 2007 03:09:57 +0000 (12:09 +0900)]
configfs: dir.c fix possible recursive locking

configfs_register_subsystem() with default_groups triggers recursive locking.
it seems that mutex_lock_nested is needed.

=============================================
[ INFO: possible recursive locking detected ]
2.6.24-rc6 #141
---------------------------------------------
swapper/1 is trying to acquire lock:
 (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca76f>] configfs_attach_group+0x4f/0x190

but task is already holding lock:
 (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca9d5>] configfs_register_subsystem+0x55/0x130

other info that might help us debug this:
1 lock held by swapper/1:
 #0:  (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca9d5>] configfs_register_subsystem+0x55/0x130

stack backtrace:
Pid: 1, comm: swapper Not tainted 2.6.24-rc6 #141
 [<c40053ba>] show_trace_log_lvl+0x1a/0x30
 [<c4005e82>] show_trace+0x12/0x20
 [<c400687e>] dump_stack+0x6e/0x80
 [<c404ec72>] __lock_acquire+0xe62/0x1120
 [<c404efb2>] lock_acquire+0x82/0xa0
 [<c43fdad8>] mutex_lock_nested+0x98/0x2e0
 [<c40ca76f>] configfs_attach_group+0x4f/0x190
 [<c40caa46>] configfs_register_subsystem+0xc6/0x130
 [<c45c8186>] init_netconsole+0x2b6/0x300
 [<c45a75f2>] kernel_init+0x142/0x320
 [<c4004fb3>] kernel_thread_helper+0x7/0x14
 =======================

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoconfigfs: Remove EXPERIMENTAL
Joel Becker [Mon, 31 Dec 2007 21:56:47 +0000 (13:56 -0800)]
configfs: Remove EXPERIMENTAL

configfs has been alive and kicking for a while now.  It underpins some
non-EXPERIMENTAL subsystems, such as OCFS2's cluster stack.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: bump version number
Mark Fasheh [Tue, 6 Nov 2007 23:52:58 +0000 (15:52 -0800)]
ocfs2: bump version number

Bump the printed version to 1.5.0. This helps us quickly identify which
version of Ocfs2 a bug filer is running.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2/dlm: Clear joining_node on hearbeat node down
Tao Ma [Thu, 10 Jan 2008 07:20:55 +0000 (15:20 +0800)]
ocfs2/dlm: Clear joining_node on hearbeat node down

Currently the process of dlm join contains 2 steps: query join and assert join.
After query join, the joined node will set its joining_node. So if the joining
node happens to panic before the 2nd step, the joined node will fail to clear
its joining_node flag because that node isn't in the domain map. It at least
cause 2 problems.
1. All the new join request will fail. So no new node can mount the volume.
2. The joined node can't umount the volume since during the umount process it
   has to wait for the joining_node to be unknown. So the umount will be hanged.

The solution is to clear the joining_node before we check the domain map.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: convert byte order of constant instead of variable
Marcin Slusarz [Tue, 25 Dec 2007 14:52:59 +0000 (15:52 +0100)]
ocfs2: convert byte order of constant instead of variable

Convert byte order of constant instead of variable it will be done at
compile time vs run time. Remove unused le32_and_cpu.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Update default cluster timeouts
Sunil Mushran [Wed, 7 Nov 2007 00:10:23 +0000 (16:10 -0800)]
ocfs2: Update default cluster timeouts

Lots of people are having trouble with the default timeouts, which are too
low. These new values are derived from an informal survey taken on
ocfs2-users, as well as data from bug reports. This should reduce the amount
of cluster disconnects and subsequent fencing seen during normal workloads.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: printf fixes
Jan Kara [Wed, 19 Dec 2007 14:25:42 +0000 (15:25 +0100)]
ocfs2: printf fixes

Explicitely convert loff_t to long long in printf. Just for sure...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Use generic_file_llseek
Jan Kara [Wed, 19 Dec 2007 14:24:52 +0000 (15:24 +0100)]
ocfs2: Use generic_file_llseek

We should use generic_file_llseek() and not default_llseek() so that
s_maxbytes gets properly checked when seeking.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Safer read_inline_data()
Jan Kara [Wed, 19 Dec 2007 14:24:09 +0000 (15:24 +0100)]
ocfs2: Safer read_inline_data()

In ocfs2_read_inline_data() we should store file size in loff_t. Although
the file size should fit in 32 bits we cannot be sure in case filesystem is
corrupted.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Silence false lockdep warnings
Jan Kara [Thu, 10 Jan 2008 23:11:45 +0000 (00:11 +0100)]
ocfs2: Silence false lockdep warnings

Create separate lockdep lock classes for system file's i_mutexes. They are
used to guard allocations and similar things and thus rank differently
than i_mutex of a regular file or directory.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years ago[PATCH 2/2] ocfs2: cluster aware flock()
Mark Fasheh [Fri, 21 Dec 2007 00:49:04 +0000 (16:49 -0800)]
[PATCH 2/2] ocfs2: cluster aware flock()

Hook up ocfs2_flock(), using the new flock lock type in dlmglue.c. A new
mount option, "localflocks" is added so that users can revert to old
functionality as need be.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years ago[PATCH 1/2] ocfs2: add flock lock type
Mark Fasheh [Fri, 21 Dec 2007 00:43:10 +0000 (16:43 -0800)]
[PATCH 1/2] ocfs2: add flock lock type

This adds a new dlmglue lock type which is intended to back flock()
requests.

Since these locks are driven from userspace, usage rules are much more
liberal than the typical Ocfs2 internal cluster lock. As a result, we can't
make use of most dlmglue features - lock caching and lock level
optimizations in particular. Additionally, userspace is free to deadlock
itself, so we have to deal with that in the same way as the rest of the
kernel - by allowing a signal to abort a lock request.

In order to keep ocfs2_cluster_lock() complexity down, ocfs2_file_lock()
does it's own dlm coordination. We still use the same helper functions
though, so duplicated code is kept to a minimum.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Local alloc window size changeable via mount option
Sunil Mushran [Thu, 20 Dec 2007 22:58:11 +0000 (14:58 -0800)]
ocfs2: Local alloc window size changeable via mount option

Local alloc is a performance optimization in ocfs2 in which a node
takes a window of bits from the global bitmap and then uses that for
all small local allocations. This window size is fixed to 8MB currently.
This patch allows users to specify the window size in MB including
disabling it by passing in 0. If the number specified is too large,
the fs will use the default value of 8MB.

mount -o localalloc=X /dev/sdX /mntpoint

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Support commit= mount option
Mark Fasheh [Wed, 7 Nov 2007 22:40:36 +0000 (14:40 -0800)]
ocfs2: Support commit= mount option

Mostly taken from ext3. This allows the user to set the jbd commit interval,
in seconds. The default of 5 seconds stays the same, but now users can
easily increase the commit interval. Typically, this would be increased in
order to benefit performance at the expense of data-safety.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Add missing permission checks
Mark Fasheh [Wed, 19 Dec 2007 02:58:18 +0000 (18:58 -0800)]
ocfs2: Add missing permission checks

Check that an online resize is being driven by a user with permission to
change system resource limits.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years ago[PATCH 2/2] ocfs2: Implement group add for online resize
Tao Ma [Tue, 18 Dec 2007 07:47:25 +0000 (15:47 +0800)]
[PATCH 2/2] ocfs2: Implement group add for online resize

This patch adds the ability for a userspace program to request that a
properly formatted cluster group be added to the main allocation bitmap for
an Ocfs2 file system. The request is made via an ioctl, OCFS2_IOC_GROUP_ADD.
On a high level, this is similar to ext3, but we use a different ioctl as
the structure which has to be passed through is different.

During an online resize, tunefs.ocfs2 will format any new cluster groups
which must be added to complete the resize, and call OCFS2_IOC_GROUP_ADD on
each one. Kernel verifies that the core cluster group information is valid
and then does the work of linking it into the global allocation bitmap.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years ago[PATCH 1/2] ocfs2: Add group extend for online resize
Tao Ma [Tue, 18 Dec 2007 07:47:03 +0000 (15:47 +0800)]
[PATCH 1/2] ocfs2: Add group extend for online resize

This patch adds the ability for a userspace program to request an extend of
last cluster group on an Ocfs2 file system. The request is made via ioctl,
OCFS2_IOC_GROUP_EXTEND. This is derived from EXT3_IOC_GROUP_EXTEND, but is
obviously Ocfs2 specific.

tunefs.ocfs2 would call this for an online-resize operation if the last
cluster group isn't full.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years ago[SCSI] usbstorage: use last_sector_bug flag universally
Hans de Goede [Sun, 20 Jan 2008 10:27:29 +0000 (11:27 +0100)]
[SCSI] usbstorage: use last_sector_bug flag universally

This patch sets the last_sector_bug flag to 1 for all USB disks. This is
needed to makes the cardreader on various HP multifunction printers work.

Since the performance impact is negible we set this flag for all USB disks to
avoid an unusual_devs.h nightmare.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Acked-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
16 years agoocfs2: Reserve ioctl range
Tao Ma [Tue, 18 Dec 2007 07:46:37 +0000 (15:46 +0800)]
ocfs2: Reserve ioctl range

We need to reserve at least two ioctls for online-resize. Reserve a small
range of ioctls for Ocfs2 use in Documentation/ioctl-number.txt. This should
give us enough room for future growth.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Initalize bitmap_cpg of ocfs2_super to be the maximum.
Tao Ma [Tue, 18 Dec 2007 07:46:10 +0000 (15:46 +0800)]
ocfs2: Initalize bitmap_cpg of ocfs2_super to be the maximum.

This value is initialized from global_bitmap->id2.i_chain.cl_cpg. If there
is only 1 group, it will be equal to the total clusters in the volume. So
as for online resize, it should change for all the nodes in the cluster.
It isn't easy and there is no corresponding lock for it.

bitmap_cpg is only used in 2 areas:
1. Check whether the suballoc is too large for us to allocate from the global
   bitmap, so it is little used. And now the suballoc size is 2048, it rarely
   meet this situation and the check is almost useless.
2. Calculate which group a cluster belongs to. We use it during truncate to
   figure out which cluster group an extent belongs too. But we should be OK
   if we increase it though as the cluster group calculated shouldn't change
   and we only ever have a small bitmap_cpg on file systems with a single
   cluster group.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years ago[CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is m
Herbert Xu [Fri, 25 Jan 2008 22:48:44 +0000 (09:48 +1100)]
[CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is m

Currently it is possible to select HW_RANDOM as a module and have
hifn795x built-in.  This causes a build problem because hifn795x
will then call hwrng_register which isn't built-in.

This patch introduces a new config option to control the hifn795x
RNG which lets us avoid this problem.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
16 years agoocfs2: Documentation update
Mark Fasheh [Tue, 30 Oct 2007 19:09:03 +0000 (12:09 -0700)]
ocfs2: Documentation update

Remove 'readpages' from the list in ocfs2.txt. Instead of having two
identical lists, I just removed the list in the OCFS2 section of fs/Kconfig
and added a pointer to Documentation/filesystems/ocfs2.txt.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Readpages support
Mark Fasheh [Tue, 30 Oct 2007 19:08:32 +0000 (12:08 -0700)]
ocfs2: Readpages support

Add ->readpages support to Ocfs2. This is rather trivial - all it required
is a small update to ocfs2_get_block (for mapping full extents via b_size)
and an ocfs2_readpages() function which partially mirrors ocfs2_readpage().

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agodlm: Split lock mode and flag constants into a sharable header.
Joel Becker [Fri, 5 Oct 2007 21:31:44 +0000 (14:31 -0700)]
dlm: Split lock mode and flag constants into a sharable header.

This allows others to use the DLM constants without being tied to the
function API of fs/dlm.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Rename ocfs2_meta_[un]lock
Mark Fasheh [Thu, 18 Oct 2007 22:30:42 +0000 (15:30 -0700)]
ocfs2: Rename ocfs2_meta_[un]lock

Call this the "inode_lock" now, since it covers both data and meta data.
This patch makes no functional changes.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Remove data locks
Mark Fasheh [Thu, 18 Oct 2007 22:23:46 +0000 (15:23 -0700)]
ocfs2: Remove data locks

The meta lock now covers both meta data and data, so this just removes the
now-redundant data lock.

Combining locks saves us a round of lock mastery per inode and one less lock
to ping between nodes during read/write.

We don't lose much - since meta locks were always held before a data lock
(and at the same level) ordered writeout mode (the default) ensured that
flushing for the meta data lock also pushed out data anyways.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Add data downconvert worker to inode lock
Mark Fasheh [Thu, 18 Oct 2007 22:13:59 +0000 (15:13 -0700)]
ocfs2: Add data downconvert worker to inode lock

In order to extend inode lock coverage to inode data, we use the same data
downconvert worker with only a small modification to only do work for
regular files.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Remove mount/unmount votes
Mark Fasheh [Mon, 24 Sep 2007 22:56:19 +0000 (15:56 -0700)]
ocfs2: Remove mount/unmount votes

The node maps that are set/unset by these votes are no longer relevant, thus
we can remove the mount and umount votes. Since those are the last two
remaining votes, we can also remove the entire vote infrastructure.

The vote thread has been renamed to the downconvert thread, and the small
amount of functionality related to managing it has been moved into
fs/ocfs2/dlmglue.c. All references to votes have been removed or updated.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Fri, 25 Jan 2008 22:41:24 +0000 (14:41 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (81 commits)
  RDMA/cxgb3: Fix the T3A workaround checks
  IB/ipath: Remove unnecessary cast
  IPoIB: Constify seq_operations function pointer tables
  RDMA/cxgb3: Mark QP as privileged based on user capabilities
  RDMA/cxgb3: Fix page shift calculation in build_phys_page_list()
  RDMA/cxgb3: Flush the receive queue when closing
  IB/ipath: Trivial simplification of ipath_make_ud_req()
  IB/mthca: Update latest "native Arbel" firmware revision
  IPoIB: Remove redundant check of netif_queue_stopped() in xmit handler
  IB/ipath: Add mappings from HW register to PortInfo port physical state
  IB/ipath: Changes to support PIO bandwidth check on IBA7220
  IB/ipath: Minor cleanup of unused fields and chip-specific errors
  IB/ipath: New sysfs entries to control 7220 features
  IB/ipath: Add new chip-specific functions to older chips, consistent init
  IB/ipath: Remove unused MDIO interface code
  IB/ehca: Prevent RDMA-related connection failures on some eHCA2 hardware
  IB/ehca: Add "port connection autodetect mode"
  IB/ehca: Define array to store SMI/GSI QPs
  IB/ehca: Remove CQ-QP-link before destroying QP in error path of create_qp()
  IB/iser: Add change_queue_depth method
  ...

16 years agoocfs2: Remove fs dependency on ocfs2_heartbeat module
Mark Fasheh [Mon, 24 Sep 2007 22:09:41 +0000 (15:09 -0700)]
ocfs2: Remove fs dependency on ocfs2_heartbeat module

Now that the dlm exposes domain information to us, we don't need generic
node up / node down callbacks. And since the DLM is only telling us when a
node goes down unexpectedly, we no longer need to optimize away node down
callbacks via the umount map.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2_dlm: Call node eviction callbacks from heartbeat handler
Mark Fasheh [Fri, 7 Sep 2007 18:11:10 +0000 (11:11 -0700)]
ocfs2_dlm: Call node eviction callbacks from heartbeat handler

With this, a dlm client can take advantage of the group protocol in the dlm
to get full notification whenever a node within the dlm domain leaves
unexpectedly.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoRDMA/cxgb3: Fix the T3A workaround checks
Steve Wise [Thu, 24 Jan 2008 22:30:16 +0000 (16:30 -0600)]
RDMA/cxgb3: Fix the T3A workaround checks

Correctly work around T3A issues by checking "hwtype != T3A" instead of
"hwtype == T3B".  This will be needed for new hardware types.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Remove unnecessary cast
Jan Engelhardt [Tue, 22 Jan 2008 19:45:30 +0000 (20:45 +0100)]
IB/ipath: Remove unnecessary cast

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIPoIB: Constify seq_operations function pointer tables
Jan Engelhardt [Tue, 22 Jan 2008 19:45:30 +0000 (20:45 +0100)]
IPoIB: Constify seq_operations function pointer tables

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoRDMA/cxgb3: Mark QP as privileged based on user capabilities
Steve Wise [Mon, 21 Jan 2008 20:42:13 +0000 (14:42 -0600)]
RDMA/cxgb3: Mark QP as privileged based on user capabilities

This is needed to support zero-stag properly.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoRDMA/cxgb3: Fix page shift calculation in build_phys_page_list()
Steve Wise [Mon, 21 Jan 2008 20:42:11 +0000 (14:42 -0600)]
RDMA/cxgb3: Fix page shift calculation in build_phys_page_list()

The existing logic incorrectly maps this buffer list:

    0: addr 0x10001000, size 0x1000
    1: addr 0x10002000, size 0x1000

To this bogus page list:

    0: 0x10000000
    1: 0x10002000

The shift calculation must also take into account the address of the
first entry masked by the page_mask as well as the last address+size
rounded up to the next page size.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoRDMA/cxgb3: Flush the receive queue when closing
Steve Wise [Mon, 21 Jan 2008 20:42:09 +0000 (14:42 -0600)]
RDMA/cxgb3: Flush the receive queue when closing

- for kernel mode cqs, call event notification handler when flushing.
- flush QP when moving from RTS -> CLOSING.
- fix logic to identify a kernel mode qp.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Trivial simplification of ipath_make_ud_req()
Ralph Campbell [Fri, 25 Jan 2008 22:17:44 +0000 (14:17 -0800)]
IB/ipath: Trivial simplification of ipath_make_ud_req()

Move the increment of s_hdrwords into the existing if block that tests
if we're doing a send with immediate, to save one test of the opcode.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/mthca: Update latest "native Arbel" firmware revision
Roland Dreier [Fri, 25 Jan 2008 22:17:44 +0000 (14:17 -0800)]
IB/mthca: Update latest "native Arbel" firmware revision

Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIPoIB: Remove redundant check of netif_queue_stopped() in xmit handler
Krishna Kumar [Thu, 15 Nov 2007 05:05:37 +0000 (10:35 +0530)]
IPoIB: Remove redundant check of netif_queue_stopped() in xmit handler

qdisc_run() now tests for queue_stopped() before calling
__qdisc_run(), and the same check is done in every iteration of
__qdisc_run(), so another check is not required in the driver xmit.
This means that ipoib_start_xmit() no longer needs to test
netif_queue_stopped(); the test was added to fix earlier kernels,
where the networking stack did not guarantee that the xmit method of
an LLTX driver would not be called after the queue was stopped, but
current kernels do provide this guarantee.

To validate, I put a debug in the TX_BUSY path which never hit with 64
threads running overnight exercising this code a few 100 million
times.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Add mappings from HW register to PortInfo port physical state
Ralph Campbell [Thu, 10 Jan 2008 08:50:41 +0000 (00:50 -0800)]
IB/ipath: Add mappings from HW register to PortInfo port physical state

Add new mappings from port physical state (a HW register value) to the
IB SubnGet(PortInfo) port physical state.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Changes to support PIO bandwidth check on IBA7220
Dave Olson [Thu, 9 Aug 2007 10:11:38 +0000 (03:11 -0700)]
IB/ipath: Changes to support PIO bandwidth check on IBA7220

The IBA7220 uses a count-based triggering mechanism, and therefore
can't use the same bandwidth verification mechanism as older chips.

To support the 7220, allow enabling and disabling armlaunch errors on
application request.  Minor robustness improvements as well.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Minor cleanup of unused fields and chip-specific errors
Dave Olson [Tue, 8 Jan 2008 09:51:46 +0000 (01:51 -0800)]
IB/ipath: Minor cleanup of unused fields and chip-specific errors

Clean up some unused header fields, minor related cleanup.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: New sysfs entries to control 7220 features
Michael Albaugh [Tue, 8 Jan 2008 08:37:34 +0000 (00:37 -0800)]
IB/ipath: New sysfs entries to control 7220 features

IBA7220 includes many more configurable IB settings. Getting/setting
these is now grouped into a pair of chip specific functions accessed via
function pointers.  Provide sysfs access to these settings.

Signed-off-by: Michael Albaugh <michael.albaugh@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Add new chip-specific functions to older chips, consistent init
Dave Olson [Tue, 8 Jan 2008 10:36:46 +0000 (02:36 -0800)]
IB/ipath: Add new chip-specific functions to older chips, consistent init

This adds the new (sometimes empty) chip-specific functions to the older
chips, and makes the initialization and related functions consistent across
all 3 chips.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Remove unused MDIO interface code
Dave Olson [Wed, 9 Jan 2008 07:16:17 +0000 (23:16 -0800)]
IB/ipath: Remove unused MDIO interface code

This code has been unused for some time, but still had leftovers
from when it was used.

Signed-off-by: Dave Olson <dave.olson@qlogic.com
Signed-off-by: Roland Dreier <rolandd@cisco.com>