Tejun Heo [Wed, 31 Oct 2007 01:17:05 +0000 (10:17 +0900)]
libata: consider errors not associated with commands for speed down
libata EH used to ignore errors not associated with commands when
determining whether speed down is necessary or not. This leads to the
following problems.
* Errors not associated with commands can occur indefinitely without
libata EH taking corrective actions.
* Upstream link errors don't trigger speed down when PMP is attached
to it and commands issued to downstream device trigger errors on the
upstream link.
This patch makes ata_eh_link_autopsy() consider errors not associated
with command for speed down.
Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Wed, 31 Oct 2007 01:17:04 +0000 (10:17 +0900)]
libata: more robust reset failure handling
Reset failure is a critical error. It results in disabling the link
requiring user intervention to re-enable it. Make reset failure
handling more robust such that libata EH doesn't give up too early.
* Temporary glitches during hardreset may lead to classification
failure when there's no softreset available. Retry instead of
giving up.
* Initial softreset or follow up softreset may fail classification.
Move classification error handling block out of followup softreset
block such that both cases are handled and retry instead of giving
up. Also, on the last try, give ATA class a blind shot.
Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Wed, 31 Oct 2007 01:17:03 +0000 (10:17 +0900)]
libata: cosmetic clean up / reorganization of ata_eh_reset()
Clean up and reorganize ata_eh_reset() to ease further changes.
* Cache ARRAY_SIZE(ata_eh_reset_timeouts) in @max_tries.
* Cache link->flags in @lflags.
* Move failure handling block to the end of the function and unnest
both success and failure handling blocks.
Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Wed, 31 Oct 2007 01:17:02 +0000 (10:17 +0900)]
libata: fix timing computation in ata_eh_reset()
As jiffies changes asynchronously, it needs to be cached if unchanging
timestamp is needed. The code in ata_eh_reset() intended to do that
with @now but never actually did it. Fix it.
Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Commands sent to ATAPI tape drives via the SCSI generic (sg) driver are
limited in the amount of data that they can transfer by the max_sectors
value. The max_sectors value is currently calculated according to the
command set for disk drives, which doesn't apply to tape drives. The
default max_sectors value of 256 limits ATAPI tape drive commands to
128 KB. This patch against 2.6.24-rc1 increases the max_sectors value
for tape drives to 65535, which permits tape drive commands to transfer
just under 32 MB.
Tested with a SuperMicro PDSME motherboard, AHCI, and a Sony SDX-570V
SATA tape drive.
Note that some of the chipset drivers also set their own max_sectors
value, which may override the value set in libata-core. I don't have
any of these chipsets to test, so I didn't go messing with them. Also,
ATAPI devices other than tape drives may benefit from similar changes,
but I have only tape drives and disk drives to test.
Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
sata_promise: fix endianess bug in ASIC PRD bug workaround
The original workaround for the Promise ASIC PRD bug
contained an endianess bug which I failed to detect:
the adjustment of the last PRD entry's length field
applied host arithmetic to little-endian data, which
is incorrect on big-endian machines.
We have the length available in host-endian format, so
do the adjustment on host-endian data and then convert
and store it in the PRD entry's little-endian data field.
Thanks to an anonymous reviewer for detecting this bug.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Stephen Rothwell [Wed, 31 Oct 2007 03:53:32 +0000 (14:53 +1100)]
libata: suppress two warnings
drivers/ata/libata-core.c:768: warning: 'ata_lpm_enable' defined but not used
drivers/ata/libata-core.c:784: warning: 'ata_lpm_disable' defined but not used
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Wed, 31 Oct 2007 11:27:57 +0000 (19:27 +0800)]
ata/sata_fsl: Remove unnecessary SCR cases
SCRs in the driver map to the standard values found in include/linux/ata.h,
so no need for individual scr_read/scr_write case statements duplicating
the natural value.
Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Ralf Baechle [Fri, 2 Nov 2007 17:26:06 +0000 (17:26 +0000)]
Use i8253.c lock for PC speaker on MIPS, too.
The Jazz machines have to use the PIT timer for dyntick and highresolution
kernels. This may break because currently just like i386 used to do MIPS
uses two separate spinlocks in the actual PIT code and the PC speaker
code. So switch to do it the same that x86 currently does PIT locking.
Linus Torvalds [Sat, 3 Nov 2007 02:37:41 +0000 (19:37 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: linux-input mailing list moved to vger.kernel.org
Input: inport, logibm - use KERN_INFO when reporting missing mouse
Input: appletouch - idle reset logic broke older Fountains
Input: hp_sdc.c - fix section mismatch
Input: appletouch - add Johannes Berg as maintainer
Input: Add Euro and Dollar key codes
Input: xpad - add more USB IDs
Alexey Dobriyan [Thu, 1 Nov 2007 23:27:08 +0000 (16:27 -0700)]
[WATCHDOG] spin_lock_init() fixes
Some watchdog drivers initialize global spinlocks in module's init function
which is tolerable, but some do it in PCI probe function. So, switch to
static initialization to fix theoretical bugs and, more importantly, stop
giving people bad examples.
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ralf Baechle [Thu, 1 Nov 2007 15:45:37 +0000 (15:45 +0000)]
[MIPS] Fix and cleanup the MIPS part of the (ab)use of CLOCK_TICK_RATE.
This is the clock rate of the i8253 PIT. A MIPS system may not have
a PIT by the symbol is used all over the kernel including some APIs.
So keeping it defined to the number for the PIT is the only sane thing
for now.
Atsushi Nemoto [Tue, 30 Oct 2007 16:21:03 +0000 (01:21 +0900)]
[MIPS] time: Code cleanups
* Do not include unnecessary headers.
* Do not mention time.README.
* Do not mention mips_timer_ack.
* Make clocksource_mips static. It is now dedicated to c0_timer.
* Initialize clocksource_mips.read statically.
* Remove null_hpt_read.
* Remove an argument of plat_timer_setup. It is just a placeholder.
Helge Deller [Fri, 2 Nov 2007 02:19:15 +0000 (22:19 -0400)]
Input: inport, logibm - use KERN_INFO when reporting missing mouse
Many mouse drivers are often compiled (e.g. in Linux distributions) into the
kernel at the same time just to make sure that at least one driver will suceed
in find it's mouse device. Nevertheless, only the inport and logitech busmouse
mouse drivers report with KERN_ERR log level if the mouse wasn't found. They
should use KERN_INFO instead, because it's not an error if the mouse isn't
attached at all.
Fountains do not support change mode request and therefore
should be excluded from idle reset attempts.
Also:
- do not re-submit URB when we decide that touchpad needs to be
reinicialized
- do not repeat size detection when reinitializing the touchpad
- Add missing KERN_* prefixes to messages
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Johannes Berg <johannes@sipsolutions.net>
The address corresponds to the list_move_tail() in
netif_rx_complete():
if (unlikely(work == weight))
list_move_tail(&n->poll_list, list);
Eventually, I traced the crashes to calling netif_rx_complete() with
work_done == budget. From looking at other drivers, it appears that
one should only call netif_rx_complete() when work_done < budget.
To fix it, I changed the test in myri10ge_poll() so that it refers
to to work_done rather than looking at the rx ring status. If
work_done is < budget, then that implies we have no more packets to
process. Any races will be resolved by the NIC when the write to
irq_claim is made.
In myri10ge_clean_rx_done(), if we ever exceeded our budget, it would
report a work_done one larger than was acutally done. This is because
the increment was done in the conditional, so work_done would be
incremented regardless of whether or not the test passed or failed.
This would lead to the WARN_ON_ONCE(work > weight); warning in
net_rx_action triggering. I've moved the increment of work_done
inside the loop. Note that this would only be a problem when we had
exceeded our budget.
Signed off by: Andrew Gallatin <gallatin@myri.com>
Linus Torvalds [Thu, 1 Nov 2007 19:09:33 +0000 (12:09 -0700)]
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[IRDA] IRNET: Fix build when TCGETS2 is defined.
[NET]: docbook fixes for netif_ functions
[NET]: Hide the net_ns kmem cache
[NET]: Mark the setup_net as __net_init
[NET]: Hide the dead code in the net_namespace.c
[NET]: Relax the reference counting of init_net_ns
[NETNS]: Make the init/exit hooks checks outside the loop
[NET]: Forget the zero_it argument of sk_alloc()
[NET]: Remove bogus zero_it argument from sk_alloc
[NET]: Make the sk_clone() lighter
[NET]: Move some core sock setup into sk_prot_alloc
[NET]: Auto-zero the allocated sock object
[NET]: Cleanup the allocation/freeing of the sock object
[NET]: Move the get_net() from sock_copy()
[NET]: Move the sock_copy() from the header
[TCP]: Another TAGBITS -> SACKED_ACKED|LOST conversion
[TCP]: Process DSACKs that reside within a SACK block
Pavel Emelyanov [Thu, 1 Nov 2007 07:45:59 +0000 (00:45 -0700)]
[NET]: Mark the setup_net as __net_init
The setup_net is called for the init net namespace
only (int the CONFIG_NET_NS=n of course) from the __init
function, so mark it as __net_init to disappear with the
caller after the boot.
Yet again, in the perfect world this has to be under
#ifdef CONFIG_NET_NS, but it isn't guaranteed that every
subsystem is registered *after* the init_net_ns is set
up. After we are sure, that we don't start registering
them before the init net setup, we'll be able to move
this code under the ifdef.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Thu, 1 Nov 2007 07:44:50 +0000 (00:44 -0700)]
[NET]: Hide the dead code in the net_namespace.c
The namespace creation/destruction code is never called
if the CONFIG_NET_NS is n, so it's OK to move it under
appropriate ifdef.
The copy_net_ns() in the "n" case checks for flags and
returns -EINVAL when new net ns is requested. In a perfect
world this stub must be in net_namespace.h, but this
function need to know the CLONE_NEWNET value and thus
requires sched.h. On the other hand this header is to be
injected into almost every .c file in the networking code,
and making all this code depend on the sched.h is a
suicidal attempt.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Thu, 1 Nov 2007 07:42:43 +0000 (00:42 -0700)]
[NETNS]: Make the init/exit hooks checks outside the loop
When the new pernet something (subsys, device or operations) is
being registered, the init callback is to be called for each
namespace, that currently exitst in the system. During the
unregister, the same is to be done with the exit callback.
However, not every pernet something has both calls, but the
check for the appropriate pointer to be not NULL is performed
inside the for_each_net() loop.
This is (at least) strange, so tune this.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Thu, 1 Nov 2007 07:39:31 +0000 (00:39 -0700)]
[NET]: Forget the zero_it argument of sk_alloc()
Finally, the zero_it argument can be completely removed from
the callers and from the function prototype.
Besides, fix the checkpatch.pl warnings about using the
assignments inside if-s.
This patch is rather big, and it is a part of the previous one.
I splitted it wishing to make the patches more readable. Hope
this particular split helped.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Thu, 1 Nov 2007 07:37:32 +0000 (00:37 -0700)]
[NET]: Make the sk_clone() lighter
The sk_prot_alloc() already performs all the stuff needed by the
sk_clone(). Besides, the sk_prot_alloc() requires almost twice
less arguments than the sk_alloc() does, so call the sk_prot_alloc()
saving the stack a bit.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Thu, 1 Nov 2007 07:31:26 +0000 (00:31 -0700)]
[NET]: Move the get_net() from sock_copy()
The sock_copy() is supposed to just clone the socket. In a perfect
world it has to be just memcpy, but we have to handle the security
mark correctly. All the extra setup must be performed in sk_clone()
call, so move the get_net() into more proper place.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilpo Järvinen [Thu, 1 Nov 2007 07:09:37 +0000 (00:09 -0700)]
[TCP]: Process DSACKs that reside within a SACK block
DSACK inside another SACK block were missed if start_seq of DSACK
was larger than SACK block's because sorting prioritizes full
processing of the SACK block before DSACK. After SACK block
sorting situation is like this:
SSSSSSSSS
D
SSSSSS
SSSSSSS
Because write_queue is walked in-order, when the first SACK block
has been processed, TCP is already past the skb for which the
DSACK arrived and we haven't taught it to backtrack (nor should
we), so TCP just continues processing by going to the next SACK
block after the DSACK (if any).
Whenever such DSACK is present, do an embedded checking during
the previous SACK block.
If the DSACK is below snd_una, there won't be overlapping SACK
block, and thus no problem in that case. Also if start_seq of
the DSACK is equal to the actual block, it will be processed
first.
Tested this by using netem to duplicate 15% of packets, and
by printing SACK block when found_dup_sack is true and the
selected skb in the dup_sack = 1 branch (if taken):
SACK block 0: 4344-5792 (relative to snd_una 2019137317)
SACK block 1: 4344-5792 (relative to snd_una 2019137317)
firewire: Fix pci resume to not pass in a __be32 config rom.
The ohci_enable() function shared between pci_probe and pci_resume
takes a host endian config rom, but ohci->config_rom is __be32. This
sets up the config rom in the wrong endian on little endian machine,
specifically, BusOptions will be initialized to a 0 max receive size.
This patch changes the way we reuse the config rom so that we avoid
this problem.
Signed-off-by: Kristian Hoegsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Linus Torvalds [Wed, 31 Oct 2007 16:19:46 +0000 (09:19 -0700)]
Remove broken ptrace() special-case code from file mapping
The kernel has for random historical reasons allowed ptrace() accesses
to access (and insert) pages into the page cache above the size of the
file.
However, Nick broke that by mistake when doing the new fault handling in
commit 54cb8821de07f2ffcd28c380ce9b93d5784b40d7 ("mm: merge populate and
nopage into fault (fixes nonlinear)". The breakage caused a hang with
gdb when trying to access the invalid page.
The ptrace "feature" really isn't worth resurrecting, since it really is
wrong both from a portability _and_ from an internal page cache validity
standpoint. So this removes those old broken remnants, and fixes the
ptrace() hang in the process.
Noticed and bisected by Duane Griffin, who also supplied a test-case
(quoth Nick: "Well that's probably the best bug report I've ever had,
thanks Duane!").
David Brownell [Mon, 29 Oct 2007 23:15:46 +0000 (00:15 +0100)]
[ARM] 4634/1: DaVinci GPIO header build fix
This fixes a build problem with GPIOs on DaVinci. Since it inlines
operations for on-chip GPIOs, it needs some headers to support those
direct register accesses. Those headers won't be included on other
platforms, since they don't have that optimization.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Someone forgot to use 'ls include/asm-*/flat.h' or
'grep -r flat_get_addr_from_rp .' to find all architectures which
may be affected by their change. Fix the fall out.
Noticed-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sat, 27 Oct 2007 14:15:49 +0000 (15:15 +0100)]
[ARM] pxa: shut up CLOCK_EVT_MODE_RESUME warning
Resolve:
CC arch/arm/mach-pxa/time.o
arch/arm/mach-pxa/time.c: In function `pxa_osmr0_set_mode':
arch/arm/mach-pxa/time.c:154: warning: enumeration value `CLOCK_EVT_MODE_RESUME' not handled in switch
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sat, 27 Oct 2007 10:01:35 +0000 (11:01 +0100)]
[ARM] Fix FIQ issue with ARM926
Jon Eibertzon writes:
> We have noticed that the I-cache is disabled while waiting for
> interrupt in cpu_arm926_do_idle in arch/arm/mm/proc-arm926.S
> and we are curious to know why, because this causes us a great
> performance hit when executing in FIQ-handlers. Is it assumed
> here that every individual FIQ-handler re-enables the I-cache?
The I-cache disable is an errata workaround, so the solution is to
disable FIQs across the section with the I-cache disabled.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Fri, 26 Oct 2007 16:56:40 +0000 (17:56 +0100)]
[ARM] Fix pxamci regression
Fix:
WARNING: at arch/arm/mach-pxa/clock.c:69 clk_disable()
[<c002d7c8>] (dump_stack+0x0/0x14) from [<c00334f4>] (clk_disable+0x34/0xa0)
[<c00334c0>] (clk_disable+0x0/0xa0) from [<c028a43c>] (pxamci_set_ios+0x74/0xf0)
[<c028a3c8>] (pxamci_set_ios+0x0/0xf0) from [<c0281548>] (mmc_power_off+0x90/0x9c)
[<c02814b8>] (mmc_power_off+0x0/0x9c) from [<c0281a30>] (mmc_start_host+0x18/0x28)
[<c0281a18>] (mmc_start_host+0x0/0x28) from [<c02825a0>] (mmc_add_host+0xe8/0x104)
[<c02824b8>] (mmc_add_host+0x0/0x104) from [<c028a7d0>] (pxamci_probe+0x24c/0x2f4)
[<c028a584>] (pxamci_probe+0x0/0x2f4) from [<c01e5948>] (platform_drv_probe+0x20/0x24)
...
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
projects / linux-2.6-omap-h63xx.git / log