Linus Torvalds [Thu, 15 Jan 2009 20:49:13 +0000 (12:49 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - Fix invalid amp value for STAC925x
ASoC: Fix the power update function for snd_soc_dapm_value_mux
sound: virtuoso: do not overwrite EEPROM on Xonar D2/D2X
ALSA: hda - Fix HP dv5 mic input
ALSA: hda - Fix missing initialization of NID 0x0e for STAC925x
ALSA: USB quirk for Logitech Quickcam Pro 9000 name
ALSA: hda - Fix stac92hd83xxx_amp_nids[]
ALSA: hda - Add automatic model setting for Samsung Q45
ALSA: hda - Don't reset HP pinctl in patch_sigmatel.c
ALSA: hda: stac92hd8xxx amp mixers
ALSA: hda - Fix silent headphone output on Panasonic CF-74
ALSA: hda - Update model descriptions in patch_sigmatel.c
ALSA: hda - Use queue_delayed_work()
ALSA: hda - Add quirk for another HP dv5
ALSA: hda - Add support of NVidia MCP78 HDMI
ALSA: hda - Fix a typo
ALSA: hda - More fixes on Gateway entries
ALSA: patch_sigmatel: Add missing Gateway entries and autodetection
ALSA: hda - Add a new function to seek for a codec ID
Mischa Jonker [Thu, 15 Jan 2009 13:30:56 +0000 (13:30 +0000)]
When a break signal is detected, the next character should be ignored.
This was not implemented correctly for the pnx8xxx_uart driver.
[From further discussion:
Correct, you can look to it as two separate bugs:
a) the next character is not ignored while it should;
b) the status bits 31-8 are copied to the 'ch' variable while they shouldn't.
Both bugs prevent correct break signal handling (and therefore correct
behaviour of the magic SysRq key). Bug b didn't cause too much trouble
earlier because in most situations the status bits are all zero; for
this case they unfortunately aren't.
]
Jiri Slaby [Thu, 15 Jan 2009 13:30:34 +0000 (13:30 +0000)]
8250_pci: add support for netmos 9835 IBM devices
Most of netmos 9835 hardware is handled by parport-serial. IBM introduces
a device which doesn't have any parallel ports and have screwed subdevice
PCI id (not corresponding to port numbers).
Handle this device (9710:9835 1014:0299) properly.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Thu, 15 Jan 2009 13:30:25 +0000 (13:30 +0000)]
tty: Fix race in the flush for some ldiscs
If you issue an ioctl to flush a tty as the line discipline is changing or
otherwise unplugged you can get a crash. The bug is very old but the rest
of the BKL lock dropping and some very "good" luck on Ingo's part caught
an example.
Use the correct ldisc_ref form so that we wait for the ldisc change to
complete and then flush
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Thu, 15 Jan 2009 15:56:59 +0000 (16:56 +0100)]
ALSA: hda - Fix invalid amp value for STAC925x
The value set in the commit 2465fb6605b4f8f3964b132017bf4078d1265fe9
is actually wrong. The value range is from 0 to 0x1f while the patch
sets to 0x7f. Let's fix it.
Clemens Ladisch [Thu, 15 Jan 2009 09:21:23 +0000 (10:21 +0100)]
sound: virtuoso: do not overwrite EEPROM on Xonar D2/D2X
On the Asus Xonar D2 and D2X models, the SPI chip select signal for the
fourth DAC shares its pin with the serial clock for the EEPROM that
contains the PCI subdevice ID values. It appears that when DAC
registers are written and some other unknown conditions occur (probably
noise on the EEPROM's chip select line), the EEPROM gets overwritten
with garbage, which makes it impossible to properly detect the card
later.
Therefore, we better avoid DAC register writes and make sure that the
driver works with the DAC's registers' default values. Consequently,
the sample format is now I2S instead of left-justified (no user-visible
change), and the DAC's volume/mute registers cannot be used anymore
(volume changes are now done by the software volume plugin).
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Thu, 15 Jan 2009 04:00:28 +0000 (20:00 -0800)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits)
powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/
powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U-Boots
powerpc/e500mc: Doorbells need to be taken w/exceptions disabled
powerpc: Enable PS3 options and QPACE in ppc64_defconfig
powerpc/powermac: Fix occasional SMP boot failure
powerpc/cacheinfo: Rename cache_dir per-cpu variable
hvc_console: Use kzalloc() instead of kmalloc() + memset()
hvc_console: Do not set low_latency when using interrupts
hvc_console: Call free_irq() only if request_irq() was successful
hvc_console: Change an mb() to smp_mb() and add some comments
powerpc: Cleanup from l64 to ll64 change: drivers/net
powerpc: Cleanup from l64 to ll64 change: drivers/char
powerpc: Cleanup from l64 to ll64 change: arch code
powerpc: Change u64/s64 to a long long integer type
powerpc/kexec: Check crash_base for relocatable kernel
powerpc: Make dummy section a valid note header
Xilinx: SPI: updated driver for device tree
drivers/of: Add the of_find_i2c_device_by_node function.
powerpc/xsysace: add compatible string for non-ipcore instance
powerpc/mpc52xx: remove dead code from GPIO driver
...
Linus Torvalds [Thu, 15 Jan 2009 03:58:40 +0000 (19:58 -0800)]
Merge branch 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits)
[CVE-2009-0029] s390 specific system call wrappers
[CVE-2009-0029] System call wrappers part 33
[CVE-2009-0029] System call wrappers part 32
[CVE-2009-0029] System call wrappers part 31
[CVE-2009-0029] System call wrappers part 30
[CVE-2009-0029] System call wrappers part 29
[CVE-2009-0029] System call wrappers part 28
[CVE-2009-0029] System call wrappers part 27
[CVE-2009-0029] System call wrappers part 26
[CVE-2009-0029] System call wrappers part 25
[CVE-2009-0029] System call wrappers part 24
[CVE-2009-0029] System call wrappers part 23
[CVE-2009-0029] System call wrappers part 22
[CVE-2009-0029] System call wrappers part 21
[CVE-2009-0029] System call wrappers part 20
[CVE-2009-0029] System call wrappers part 19
[CVE-2009-0029] System call wrappers part 18
[CVE-2009-0029] System call wrappers part 17
[CVE-2009-0029] System call wrappers part 16
[CVE-2009-0029] System call wrappers part 15
...
Linus Torvalds [Thu, 15 Jan 2009 03:55:25 +0000 (19:55 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
[XFS] Update maintainers
[XFS] use scalable vmap API
[XFS] remove old vmap cache
[XFS] make xfs_ino_t an unsigned long long
[XFS] truncate readdir offsets to signed 32 bit values
[XFS] fix compile of xfs_btree_readahead_lblock on m68k
[XFS] Remove macro-to-function indirections in the mask code
[XFS] Remove macro-to-function indirections in attr code
[XFS] Remove several unused typedefs.
[XFS] pass XFS_IGET_BULKSTAT to xfs_iget for handle operations
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
IDE: fix sparse signed-ness errors with host->host_busy
ide: fix suspend regression
tx4938ide: Fix build error due to read_sff_dma_status moving
ide: remove unused CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
sl82c105: remove dead code
via82cxxx: fix cable warning message
ide: can't use SSD/non-rotational queue flag for all CFA devices
it821x.c: use dev->revision instead of pci_read_config_byte
it821x: Add ultra_mask quirk for Vortex86SX
ide: fix accidental LOCKDEP breakage caused by local_irq_set() removal
Ben Dooks [Wed, 14 Jan 2009 18:19:04 +0000 (19:19 +0100)]
IDE: fix sparse signed-ness errors with host->host_busy
The host_busy field in struct ide_host defaults to a
signed-long, where most arch's test_and_set_bit_*
macros use an unsigned long.
Change to using an unsigned long, which on ARM removes
the following sparse errors:
drivers/ide/ide-io.c:681:8: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:681:8: expected unsigned long volatile *p
drivers/ide/ide-io.c:681:8: got long volatile *<noident>
drivers/ide/ide-io.c:681:8: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:681:8: expected unsigned long volatile *p
drivers/ide/ide-io.c:681:8: got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3: got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3: got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3: got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3: got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3: got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3: got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3: got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3: expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3: got long volatile *<noident>
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
On Monday 12 January 2009, Simon Holm Thøgersen wrote:
> commit 295f000 ("ide: don't execute the next queued command from the
> hard-IRQ context (v2)") breaks suspend to disk for me. On
> 'echo disk > /sys/power/state' the systems hangs, letting me switch
> virtual consoles, but not responding to Alt+SysRq
Restart the request queue early for REQ_TYPE_PM_RESUME requests
(though there is only one resume request for the whole resume
sequence it stays in the queue until is fully completed and now
depends on kblockd for processing consequential resume states).
Reported-and-bisected-by: Simon Holm Thøgersen <odie@cs.aau.dk> Tested-by: Simon Holm Thøgersen <odie@cs.aau.dk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ide: fix accidental LOCKDEP breakage caused by local_irq_set() removal
commit 54cc1428cfa619e16d75baae8cb041a2eff015f0 ("ide: remove
local_irq_set() macro") accidentally replaced local_save_flags()
by local_irq_set() in ide_probe_port() and __ide_wait_stat()
which resulted in LOCKDEP breakage.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Andrew Morton [Wed, 14 Jan 2009 17:35:44 +0000 (09:35 -0800)]
kernel/up.c: omit it if SMP=y, USE_GENERIC_SMP_HELPERS=n
Fix the sparc build - we were including `up.o' on SMP builds, when
CONFIG_USE_GENERIC_SMP_HELPERS=n.
Tested-by: Robert Reif <reif@earthlink.net> Fixed-by: Robert Reif <reif@earthlink.net> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Piggin [Wed, 14 Jan 2009 06:28:16 +0000 (07:28 +0100)]
mm: fix assertion
This assertion is incorrect for lockless pagecache. By definition if we
have an unpinned page that we are trying to take a speculative reference
to, it may become the tail of a compound page at any time (if it is
freed, then reallocated as a compound page).
It was still a valid assertion for the vmscan.c LRU isolation case, but
it doesn't seem incredibly helpful... if somebody wants it, they can
put it back directly where it applies in the vmscan code.
Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heiko Carstens [Wed, 14 Jan 2009 13:14:02 +0000 (14:14 +0100)]
[CVE-2009-0029] System call wrapper special cases
System calls with an unsigned long long argument can't be converted with
the standard wrappers since that would include a cast to long, which in
turn means that we would lose the upper 32 bit on 32 bit architectures.
Also semctl can't use the standard wrapper since it has a 'union'
parameter.
So we handle them as special case and add some extra wrappers instead.
Heiko Carstens [Wed, 14 Jan 2009 13:13:57 +0000 (14:13 +0100)]
[CVE-2009-0029] Make sys_pselect7 static
Not a single architecture has wired up sys_pselect7 plus it is the
only system call with seven parameters. Just make it static and
rename it to do_pselect which will do the work for sys_pselect6.
Heiko Carstens [Wed, 14 Jan 2009 13:13:56 +0000 (14:13 +0100)]
[CVE-2009-0029] Remove __attribute__((weak)) from sys_pipe/sys_pipe2
Remove __attribute__((weak)) from common code sys_pipe implemantation.
IA64, ALPHA, SUPERH (32bit) and SPARC (32bit) have own implemantations
with the same name. Just rename them.
For sys_pipe2 there is no architecture specific implementation.
Cc: Richard Henderson <rth@twiddle.net> Cc: David S. Miller <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Heiko Carstens [Wed, 14 Jan 2009 13:13:54 +0000 (14:13 +0100)]
[CVE-2009-0029] Convert all system calls to return a long
Convert all system calls to return a long. This should be a NOP since all
converted types should have the same size anyway.
With the exception of sys_exit_group which returned void. But that doesn't
matter since the system call doesn't return.
ALSA: USB quirk for Logitech Quickcam Pro 9000 name
The Logitech QuickCam Pro 9000 does not appear to any product identification
strings in its USB device descriptor. Therefore it receives a device name of
"USB Device 0x46d:0x990". Th e attached patch below adds a USB quirk to
provide a more friendly name.
Takashi Iwai [Wed, 14 Jan 2009 08:40:25 +0000 (09:40 +0100)]
ALSA: hda - Fix stac92hd83xxx_amp_nids[]
Fix the bug introduced in commit c15c5060fc32d7de7cde76aa61e98bae1334d82e:
sound/pci/hda/patch_sigmatel.c: In function ‘patch_stac92hd83xxx’:
sound/pci/hda/patch_sigmatel.c:4765: warning: assignment from incompatible pointer type
Takashi Iwai [Fri, 9 Jan 2009 15:57:14 +0000 (16:57 +0100)]
ALSA: hda - Fix silent headphone output on Panasonic CF-74
CF-74 does the headphone/speaker switching on hardware, thus the driver
shouldn't do any software-toggling of pins. Otherwise it results in a
silent headphone output.
This patch simply resets the hp_detect flag to fix the problem.
Anton Vorontsov [Sun, 11 Jan 2009 16:55:39 +0000 (19:55 +0300)]
powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/
This patch is used to help Jean Delvare to get rid of drivers/i2c/chips/
directory. The new location suggested by Kumar Gala: as the driver is
83xx specific it's placed into arch/powerpc/platforms/83xx/.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Anton Vorontsov [Sun, 11 Jan 2009 15:30:13 +0000 (18:30 +0300)]
powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U-Boots
FSL U-Boots use /soc8315@e0000000 node to search and fixup serial
nodes' clock-frequency properties. Though in upstream kernels we use
new naming convention -- for IMMR address space dts files specify
/immr@e0000000 nodes.
This makes FSL U-Boots fail to fixup the clock frequencies, and that
leads to serial ports misbehaviour. We can workaround the issue by
filling the clock frequency values manually.
p.s. For the same reason FSL U-Boots fail to fixup MAC addresses for
ethernet nodes, so users should either change the .dts file locally
or set MAC address via `ifconfig hw ether' command.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Linus Torvalds [Tue, 13 Jan 2009 22:53:16 +0000 (14:53 -0800)]
Merge branch 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86 PAT: remove CPA WARN_ON for zero pte
x86 PAT: return compatible mapping to remap_pfn_range callers
x86 PAT: change track_pfn_vma_new to take pgprot_t pointer param
x86 PAT: consolidate old memtype new memtype check into a function
x86 PAT: remove PFNMAP type on track_pfn_vma_new() error
Linus Torvalds [Tue, 13 Jan 2009 22:52:35 +0000 (14:52 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
TWL4030: fix clk API usage
[ARM] 5364/1: allow flush_ioremap_region() to be used from modules
[ARM] w90x900: fix build errors and warnings
[ARM] i.MX add missing include
[ARM] i.MX: fix breakage from commit 278892736e99330195c8ae5861bcd9d791bbf19e
[ARM] i.MX: remove LCDC controller register definitions from imx-regs.h
Bernd Schmidt [Tue, 13 Jan 2009 21:14:48 +0000 (22:14 +0100)]
Fix timeouts in sys_pselect7
Since we (Analog Devices) updated our Blackfin kernel to 2.6.28, we've
seen occasional 5-second hangs from telnet. telnetd calls select with a
NULL timeout, but with the new kernel, the system call occasionally
returns 0, which causes telnet to call sleep (5). This did not happen
with earlier kernels.
The code in sys_pselect7 looks a bit strange, in particular the variable
"to" is initialized to NULL, then changed if a non-null timeout was
passed in, but not used further. It needs to be passed to
core_sys_select instead of &end_time.
Helge Deller [Tue, 13 Jan 2009 21:51:07 +0000 (22:51 +0100)]
fix early_serial_setup() regression
Commit b430428a188e8a434325e251d0704af4b88b4711 ("8250: Don't clobber
spinlocks.") introduced a regression on the parisc architecture, which
broke the handover to the serial port at boottime.
early_serial_setup() was changed to only copy a subset of the uart_port
fields, and sadly the "type" and "line" fields were forgotten and thus
the serial port was not initialized and could not be used for a
handover. This patch fixes this by copying the missing fields.
As this change to early_serial_setup() doesn't need an initialized
spinlock in the uart_port struct any longer, we can drop the spinlock
initialization in the superio driver.
Cc: David Daney <ddaney@caviumnetworks.com> Cc: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: linux-parisc@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Russell King [Sat, 10 Jan 2009 10:40:42 +0000 (10:40 +0000)]
TWL4030: fix clk API usage
Always pass a struct device if one is available; and there's really
no reason for the processor specific stuff in this file if only
people would follow the API usage properly by using the struct device.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Impact: reduce scope of debug check - avoid warnings
The logic to find whether identity map exists or not using
high_memory or max_low_pfn_mapped/max_pfn_mapped are not complete
as the memory withing the range may not be mapped if there is a
unusable hole in e820.
Specifically, on my test system I started seeing these warnings with
tools like hwinfo, acpidump trying to map ACPI region.
We can add logic to check for this. But, there can also be other holes in
identity map when we have 1GB of aligned reserved space in e820.
This patch handles it by removing the WARN_ON and returning a specific
error value (EFAULT) to indicate that the address does not have any
identity mapping.
The code that tries to keep identity map in sync can ignore
this error, with other callers of cpa still getting error here.
x86 PAT: return compatible mapping to remap_pfn_range callers
Impact: avoid warning message, potentially solve 3D performance regression
Change x86 PAT code to return compatible memtype if the exact memtype that
was requested in remap_pfn_rage and friends is not available due to some
conflict.
This is done by returning the compatible type in pgprot parameter of
track_pfn_vma_new(), and the caller uses that memtype for page table.
Note that track_pfn_vma_copy() which is basically called during fork gets the
prot from existing page table and should not have any conflict. Hence we use
strict memtype check there and do not allow compatible memtypes.
x86 PAT: change track_pfn_vma_new to take pgprot_t pointer param
Impact: cleanup
Change the protection parameter for track_pfn_vma_new() into a pgprot_t pointer.
Subsequent patch changes the x86 PAT handling to return a compatible
memtype in pgprot_t, if what was requested cannot be allowed due to conflicts.
No fuctionality change in this patch.
x86 PAT: consolidate old memtype new memtype check into a function
Impact: cleanup
Move the new memtype old memtype allowed check to header so that is can be
shared by other users. Subsequent patch uses this in pat.c in remap_pfn_range()
code path. No functionality change in this patch.
projects / linux-2.6-omap-h63xx.git / log