Harvey Harrison [Thu, 14 Feb 2008 17:36:32 +0000 (09:36 -0800)]
ata: fix sparse warnings in pata_legacy.c
Use ld_qdi and ld_winbond to avoid shadowing static int
variables qdi and winbond. The ld_ prefix refers to
legacy_data.
drivers/ata/pata_legacy.c:777:21: warning: symbol 'qdi' shadows an earlier one
drivers/ata/pata_legacy.c:128:12: originally declared here
drivers/ata/pata_legacy.c:811:21: warning: symbol 'qdi' shadows an earlier one
drivers/ata/pata_legacy.c:128:12: originally declared here
drivers/ata/pata_legacy.c:848:21: warning: symbol 'qdi' shadows an earlier one
drivers/ata/pata_legacy.c:128:12: originally declared here
drivers/ata/pata_legacy.c:882:21: warning: symbol 'qdi' shadows an earlier one
drivers/ata/pata_legacy.c:128:12: originally declared here
drivers/ata/pata_legacy.c:1040:21: warning: symbol 'winbond' shadows an earlier one
drivers/ata/pata_legacy.c:129:12: originally declared here
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Linus Torvalds [Wed, 20 Feb 2008 02:29:57 +0000 (18:29 -0800)]
Merge branch 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6
* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
agp: fix missing casts that produced a warning.
agp: add support for 662/671 to agp driver
fix historic ioremap() abuse in AGP
agp/sis: Suspend support for SiS AGP
agp/sis: Clear bit 2 from aperture size byte as well
Linus Torvalds [Wed, 20 Feb 2008 01:48:51 +0000 (17:48 -0800)]
Merge branch 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/sis: add pciid for SiS 662/671 chipset
drm: add new rv380 pciid
drm: add support for passing state into the suspend hooks.
drm/i915: Fix hibernate save/restore of VGA attribute regs
drm/i915 more registers for S3 (DSPCLK_GATE_D, CACHE_MODE_0, MI_ARB_STATE)
drm/i915: restore pipeconf regs unconditionally
drm/i915: save/restore interrupt state
drm: convert drm from nopage to fault.
i915: wrap chipset types requiring hw status set ioctl
drm/radeon: add initial rs690 support to drm.
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (32 commits)
x86: fix page_is_ram() thinko
x86: fix WARN_ON() message: teach page_is_ram() about the special 4Kb bios data page
x86: i8259A: remove redundant irq_descinitialization
x86: fix vdso_install breaks user "make install"
x86: change IO delay back to 0x80
x86: lds - Use THREAD_SIZE instead of numeric constant
x86: lds - Use PAGE_SIZE instead of numeric constant
x86 cleanup: suspend_asm_64.S - use X86_CR4_PGE instead of numeric value
x86: docs fixes to Documentation/i386/IO-APIC.txt
x86: fix printout ugliness in cpu info printk
x86: clean up csum-wrappers_64.c some more
x86: coding style fixes in arch/x86/lib/csum-wrappers_64.c
x86: coding style fixes in arch/x86/lib/io_64.c
x86: exclude vsyscall files from stackprotect
x86: add pgd_large() on 64-bit, for consistency
x86: minor cleanup of comments in processor.h
x86: annotate pci/common.s:pci_scan_bus_with_sysdata with __devinit
x86: fix section mismatch in head_64.S:initial_code
x86: fix section mismatch in srat_64.c:reserve_hotadd
x86: fix section mismatch warning in topology.c:arch_register_cpu
...
Linus Torvalds [Tue, 19 Feb 2008 23:53:02 +0000 (15:53 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6: (29 commits)
[XTENSA] Allow debugger to modify the WINDOWBASE register.
[XTENSA] Fix makefile to work with binutils-2.18.
[XTENSA] Fix register corruption for certain processor configurations
[XTENSA] Fix cache flush macro for D$/I$ aliasing/non-aliasing
[XTENSA] Exclude thread-global registers from the xtregs structures.
[XTENSA] Add support for the sa_restorer function
[XTENSA] Add support for configurable registers and coprocessors
[XTENSA] Clean up stat structs.
[XTENSA] Use preprocessor to generate the linker script for the ELF boot image
[XTENSA] Add missing RELOCATE_ENTRY for debug vector
[XTENSA] Add volatile keyword to asm statements accessing counter registers
[XTENSA] Remove unused code
[XTENSA] Fix modules for non-exec processor configurations
[XTENSA] Add missing cast in elf.h ELF_CORE_COPY_REGS()
[XTENSA] Fix comments regarding the number of frames to save
[XTENSA] Add missing a2 register restore in register spill routine
[XTENSA] adjust boot linker script start addresses
[XTENSA] Remove oldmask from sigcontext and fix register flush
[XTENSA] Clean up elf-gregset.
[XTENSA] Fix icache flush for cache aliasing
...
David Howells [Tue, 19 Feb 2008 18:58:59 +0000 (18:58 +0000)]
MN10300: Make the kernel jump into gdbstub on a BUG
Make the kernel jump into gdbstub (if configured) on a BUG with the register
set from the BUG rather than interpolating another illegal instruction and
leaving gdbstub's idea of the process counter in unsupported_syscall() where
the original BUG was detected.
With this patch, gdbstub reports a SIGABRT to the compiler and reports the
program counter at the original BUG, allowing the execution state at the time
of the BUG to be examined with GDB.
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Tue, 19 Feb 2008 18:58:54 +0000 (18:58 +0000)]
MN10300: Introduce barriers to replace removed volatiles in gdbstub
Introduce into the MN10300 gdbstub a couple of barrier() calls to replace the
removed volatility of the input/output index variables for the Rx ring buffer.
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Tue, 19 Feb 2008 18:58:49 +0000 (18:58 +0000)]
MN10300: Call update_process_times() outside of the xtime_lock
Call update_process_times() outside of the xtime_lock. Somewhere somewhere
inside one of the functions called by that, xtime_lock is readlocked, which
ends up in a deadlock situation.
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 19 Feb 2008 23:50:11 +0000 (15:50 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/mthca: Free correct MPT on error exit from mthca_fmr_alloc()
IPoIB/cm: Fix ipoib_cm_dev_stop() cleanup when drain times out
Jesse Barnes [Tue, 29 Jan 2008 05:05:22 +0000 (21:05 -0800)]
drm/i915: Fix hibernate save/restore of VGA attribute regs
In hibernate, we may end up calling the VGA save regs function twice, so we need to make sure it's idempotent. That means leaving ARX in index mode after the first save operation. Fixes hibernate on 965.
Jesse Barnes [Fri, 8 Feb 2008 01:33:28 +0000 (17:33 -0800)]
drm/i915: restore pipeconf regs unconditionally
On many chipsets, the checks for DPLL enable or VGA mode will prevent the pipeconf regs from being restored, which could result in a blank display or X failing to come back after resume. So restore them unconditionally along with actually restoring pipe B's palette correctly.
Jesse Barnes [Tue, 19 Feb 2008 23:39:58 +0000 (09:39 +1000)]
drm/i915: save/restore interrupt state
On resume, if the interrupt state isn't restored correctly, we may end
up with a flood of unexpected or ill-timed interrupts, which could cause
the kernel to disable the interrupt or vblank events to happen at the
wrong time. So save/restore them properly.
Sam Ravnborg [Tue, 19 Feb 2008 20:00:18 +0000 (21:00 +0100)]
Add missing init section definitions
When adding __devinitconst etc. the __initconst variant
were missed.
Add this one and proper definitions for .head.text for use
in .S files.
The naming .head.text is preferred over .text.head as the
latter will conflict for a function named head when introducing
-ffunctions-sections.
XXXINIT_TO_INIT and XXXEXIT_TO_EXIT warnings use the reversed symbol name order
in the suggestion, e.g.:
WARNING: vmlinux.o(.meminit.text+0x36c): Section mismatch in reference from the function free_area_init_core() to the function .init.text:setup_usemap()
The function __meminit free_area_init_core() references
a function __init setup_usemap().
If free_area_init_core is only used by setup_usemap then
annotate free_area_init_core with a matching annotation.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Roland Dreier [Tue, 19 Feb 2008 18:42:50 +0000 (10:42 -0800)]
IB/mthca: Free correct MPT on error exit from mthca_fmr_alloc()
When mthca_fmr_alloc() returns an error, it should free the MPT at the
index key, not mr->ibmr.lkey, since the lkey has been mangled by
hw_index_to_key() and no longer is the real index. This bug causes
corruption of the MPT table free bitmap when mthca_fmr_alloc() fails.
IPoIB/cm: Fix ipoib_cm_dev_stop() cleanup when drain times out
Commit efcd9971 ("IPoIB/cm: Factor out ipoib_cm_free_rx_reap_list()")
introduced a bug in ipoib_cm_dev_stop() when the receive drain times
out. In that case, the function moves all the pending rx stuff into a
private list but then calls ipoib_cm_free_rx_reap_list(), which
handles a different list.
Fix this by moving everything to the rx_reap_list that will actually
get freed up.
This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=906>.
Signed-off-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Linus Torvalds [Tue, 19 Feb 2008 17:08:49 +0000 (09:08 -0800)]
Revert "SLUB: Alternate fast paths using cmpxchg_local"
This reverts commit 1f84260c8ce3b1ce26d4c1d6dedc2f33a3a29c0c, which is
suspected to be the reason for some very occasional and hard-to-trigger
crashes that usually look related to memory allocation (mostly reported
in networking, but since that's generally the most common source of
shortlived allocations - and allocations in interrupt contexts - that in
itself is not a big clue).
See for example
http://bugzilla.kernel.org/show_bug.cgi?id=9973
http://lkml.org/lkml/2008/2/19/278
etc.
One promising suspicion for what the root cause of bug is (which also
explains why it's so hard to trigger in practice) came from Eric
Dumazet:
"I wonder how SLUB_FASTPATH is supposed to work, since it is affected
by a classical ABA problem of lockless algo.
cmpxchg_local(&c->freelist, object, object[c->offset]) can succeed,
while an interrupt came (on this cpu), and several allocations were
done, and one free was performed at the end of this interruption, so
'object' was recycled.
c->freelist can then contain the previous value (object), but
object[c->offset] was changed by IRQ.
We then put back in freelist an already allocated object."
but another reason for the revert is simply that everybody agrees that
this code was the main suspect just by virtue of the pattern of oopses.
Cc: Torsten Kaiser <just.for.lkml@googlemail.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ingo Molnar <mingo@elte.hu> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
...
LD .tmp_vmlinux1
arch/mips/sni/built-in.o: In function `snirm_a20r_setup_devinit':
a20r.c:(.init.text+0x42c): undefined reference to `sni_eisa_root_init'
a20r.c:(.init.text+0x42c): relocation truncated to fit: R_MIPS_26 against `sni_eisa_root_init'
arch/mips/sni/built-in.o: In function `snirm_setup_devinit':
rm200.c:(.init.text+0x52c): undefined reference to `sni_eisa_root_init'
rm200.c:(.init.text+0x52c): relocation truncated to fit: R_MIPS_26 against `sni_eisa_root_init'
make[1]: *** [.tmp_vmlinux1] Error 1
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 19 Feb 2008 15:59:33 +0000 (15:59 +0000)]
[MIPS] PCI: Port i386 PCI fixes.
The MIPS version of pcibios_enalbe_resources did not have the fixes
from ed6d14f9760857c745206c978b80352fc09cfd19 yet which under circumstances
similar to x86 might result in failures.
Fix type mismatch warnings for 64-bit kernel builds which trigger -Werror.
The problem affects only SB-1 kernels with CONFIG_SIBYTE_DMA_PAGEOPS
enabled.
Ralf Baechle [Sat, 16 Feb 2008 22:34:25 +0000 (22:34 +0000)]
[MIPS] Fix buggy invocations of kmap_coherent()
kmap_coherent will only work correctly if the page it is called on is
not marked dirty. If it's dirty the kernel address of the page should
be used instead of a temporary mapping.
Properly acknowledge RM7K and RM9K interrupts. Before this, interrupts were
permanently masked after their first occurrence, making them non-functional.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Mon, 11 Feb 2008 14:51:40 +0000 (14:51 +0000)]
[MIPS] Handle I-cache coherency in flush_cache_range()
So far flush_cache_range() did't consider the I-cache largely because it
did rarely ever matter to real world code. This was working primarily
because normally code and data are don't share the same pages - with the
exception of MIPS16 code which uses address constants embedded between
the code. The following sequence of events may break the code:
o MIPS16 executable being loaded
o dynamic linker relocates the address constants embedded into the code:
o Uses mprotect(2) to make code pages PROT_READ|PROT_WRITE
o Performs the actual relocations by writing to the pages which likely
are COW. Because no PROT_EXEC is set I-cache coherence will not be
considered.
o Uses mprotect(2) to switch code pages back to PROT_READ|PROT_EXEC.
This results in a call to flush_cache_range() which also does not
consider I-caches.
o => executing the page just having been relocated may now result in the
I-cache getting refilled with stale data from memory.
Pavel Emelyanov [Tue, 5 Feb 2008 07:44:24 +0000 (23:44 -0800)]
[MIPS] Use find_task_by_vpid in system calls
There are some places left in mips, that lookup task in initial namespace,
while the code doing so gets the pid from the user space and thus must
treat it as virtual.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Linus Torvalds [Tue, 19 Feb 2008 16:04:23 +0000 (08:04 -0800)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] qdio: FCP/SCSI write I/O stagnates on LPAR
[S390] Fix futex_atomic_cmpxchg_std inline assembly.
[S390] dcss: Fix Unlikely(x) != y
[S390] sclp: clean up send/receive naming scheme
[S390] etr: fix compile error on !SMP
[S390] qdio: fix qdio_activate timeout handling.
[S390] Initialize per cpu lowcores on cpu hotplug.
[S390] find bit corner case.
[S390] dasd: fix locking in __dasd_device_process_final_queue
[S390] Make sure enabled wait psw is loaded in default_idle.
[S390] Let NR_CPUS default to 32/64 on s390/s390x.
[S390] cio: Do timed recovery on workqueue.
[S390] cio: Remember to initialize recovery_lock.
Linus Torvalds [Tue, 19 Feb 2008 16:03:02 +0000 (08:03 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
libata: implement drain buffers
libata: eliminate the home grown dma padding in favour of
block: clear drain buffer if draining for write command
block: implement request_queue->dma_drain_needed
block: add request->raw_data_len
block: update bio according to DMA alignment padding
libata: update ATAPI overflow draining
elevator: make elevator_get() attempt to load the appropriate module
cfq-iosched: add hlist for browsing parallel to the radix tree
block: make blk_rq_map_user() clear ->bio if it unmaps it
fs/block_dev.c: remove #if 0'ed code
make struct def_blk_aops static
make blk_settings_init() static
make blk_ioc_init() static
make blk-core.c:request_cachep static again
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
[WATCHDOG] HP ProLiant WatchDog driver
[WATCHDOG] blackfin Watchdog driver: relocate all strings used in __init functions to __initdata
[WATCHDOG] Convert mtx1 wdt to be a platform device and use generic GPIO API
[WATCHDOG] Add support for SB1 hardware watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-genirq:
genirq: do not leave interupts enabled on free_irq
genirq: spurious.c: use time_* macros
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (60 commits)
[NIU]: Bump driver version and release date.
[NIU]: Fix BMAC alternate MAC address indexing.
net: fix kernel-doc warnings in header files
[IPV6]: Use BUG_ON instead of if + BUG in fib6_del_route.
[IPV6]: dst_entry leak in ip4ip6_err. (resend)
bluetooth: do not move child device other than rfcomm
bluetooth: put hci dev after del conn
[NET]: Elminate spurious print_mac() calls.
[BLUETOOTH] hci_sysfs.c: Kill build warning.
[NET]: Remove MAC_FMT
net/8021q/vlan_dev.c: Use print_mac.
[XFRM]: Fix ordering issue in xfrm_dst_hash_transfer().
[BLUETOOTH] net/bluetooth/hci_core.c: Use time_* macros
[IPV6]: Fix hardcoded removing of old module code
[NETLABEL]: Move some initialization code into __init section.
[NETLABEL]: Shrink the genl-ops registration code.
[AX25] ax25_out: check skb for NULL in ax25_kick()
[TCP]: Fix tcp_v4_send_synack() comment
[IPV4]: fix alignment of IP-Config output
Documentation: fix tcp.txt
...
Casey Schaufler [Fri, 15 Feb 2008 23:24:25 +0000 (15:24 -0800)]
Smack: unlabeled outgoing ambient packets
Smack uses CIPSO labeling, but allows for unlabeled packets by
specifying an "ambient" label that is applied to incoming unlabeled
packets.
Because the other end of the connection may dislike IP options, and ssh
is one know application that behaves thus, it is prudent to respond in
kind.
This patch changes the network labeling behavior such that an outgoing
packet that would be given a CIPSO label that matches the ambient label
is left unlabeled. An "unlbl" domain is added and the netlabel
defaulting mechanism invoked rather than assuming that everything is
CIPSO. Locking has been added around changes to the ambient label as
the mechanisms used to do so are more involved.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arjan van de Ven [Mon, 18 Feb 2008 17:58:45 +0000 (09:58 -0800)]
x86: fix page_is_ram() thinko
page_is_ram() has a special case for the 640k-1M bios area, however
due to a thinko the special case checks the e820 table entry and
not the memory the user has asked for. This patch fixes the bug.
[ mingo@elte.hu: this too is better solved in the e820 space, but those
fixes are too intrusive for v2.6.25. ]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Arjan van de Ven [Mon, 18 Feb 2008 17:54:33 +0000 (09:54 -0800)]
x86: fix WARN_ON() message: teach page_is_ram() about the special 4Kb bios data page
This patch teaches page_is_ram() about the fact that the first
4Kb of memory are special on x86, even though the E820 table
normally doesn't exclude it.
This fixes the WARN_ON() reported by Laurent Riffard who was also
very helpful in diagnosing the issue.
[ mingo@elte.hu: we are working on doing this properly in the e820
space, but for 2.6.25 this is the better fix. ]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Remove redundant irq_desc[NR_IRQS] element initialization in
init_ISA_irqs(). irq_desc[NR_IRQS] is already statically
initialized with the same values in kernel/irq/handle.c .
besides the clean-up value this also saves some space:
text data bss dec hex filename
1389 356 14 1759 6df i8259_32.o.before
1325 356 14 1695 69f i8259_32.o.after
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ingo Molnar [Sun, 17 Feb 2008 19:20:24 +0000 (20:20 +0100)]
x86: change IO delay back to 0x80
change back the IO delay to 0x80.
Alan says that 0xed is known to break some older boxes, and given that
the get-rid-of-outb-APIs efforts are well underway we should just let
them be finished.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cyrill Gorcunov [Sun, 17 Feb 2008 15:17:18 +0000 (18:17 +0300)]
x86: lds - Use THREAD_SIZE instead of numeric constant
Though we use PDA for regular task stack but that
is not acceptable for init_task wich is special
one. We still have to allocate init_task's stack
in that manner.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Sun, 17 Feb 2008 12:23:00 +0000 (13:23 +0100)]
x86: annotate pci/common.s:pci_scan_bus_with_sysdata with __devinit
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Sun, 17 Feb 2008 12:22:59 +0000 (13:22 +0100)]
x86: fix section mismatch in head_64.S:initial_code
initial_code are initially used to hold a function pointer
from __init and later from __cpuinit. This confuses modpost
and changing initial_code to REFDATA silence the warning.
(But now we do not discard the variable anymore).
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Sun, 17 Feb 2008 12:22:58 +0000 (13:22 +0100)]
x86: fix section mismatch in srat_64.c:reserve_hotadd
reserve_hotadd() are only used by __init acpi_numa_memory_affinity_init().
Annotate reserve_hotadd() with __init is the trivial fix.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Sun, 17 Feb 2008 12:22:49 +0000 (13:22 +0100)]
x86: fix section mismatch warning in topology.c:arch_register_cpu
arch_register_cpu() is only defined for HOTPLUG_CPU code
so simple fix is to ignore references by annotating the
function __ref.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Sun, 17 Feb 2008 12:22:47 +0000 (13:22 +0100)]
x86: fix section mismatch in setup_64.c:srat_detect_node
srat_detect_node() is only used by __cpuinit init_intel().
So the trivial fix is to annotate srat_detect_node() with __cpuinit.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Sun, 17 Feb 2008 12:22:46 +0000 (13:22 +0100)]
x86: fix section mismatch warning in setup_64.c:nearby_node
nearby_node() were only used by __cpuinit amd_detect_cmp()
So annotating nearby_node() __cpuinit was the trivial fix.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andi Kleen [Mon, 11 Feb 2008 09:50:21 +0000 (10:50 +0100)]
x86: CPA: remove BUG_ON for LRU/Compound pages
New implementation does not use lru for anything so there is no need
to reject pages that are in the LRU. Similar for compound pages (which
were checked because they also use page->lru)
Harvey Harrison [Wed, 13 Feb 2008 21:26:39 +0000 (13:26 -0800)]
x86: sparse error in efi_32.c
arch/x86/kernel/efi_32.c:42:6: warning: symbol 'efi_call_phys_prelog' was not declared. Should it be static?
arch/x86/kernel/efi_32.c:84:6: warning: symbol 'efi_call_phys_epilog' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Harvey Harrison [Thu, 14 Feb 2008 23:23:53 +0000 (15:23 -0800)]
x86, kprobes: remove sparse warnings from x86
arch/x86/kernel/kprobes.c:584:16: warning: symbol 'kretprobe_trampoline_holder' was not declared. Should it be static?
arch/x86/kernel/kprobes.c:676:6: warning: symbol 'trampoline_handler' was not declared. Should it be static?
Make them static and add the __used attribute, approach taken from the
arm kprobes implementation.
kretprobe_trampoline_holder uses inline assemly to define the global
symbol kretprobe_trampoline, but nothing ever calls the holder explicitly.
trampoline handler is only called from inline assembly in the same file,
mark it used and static.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ursula Braun [Tue, 19 Feb 2008 14:29:35 +0000 (15:29 +0100)]
[S390] qdio: FCP/SCSI write I/O stagnates on LPAR
If running on LPAR, qdio might overlook an incoming buffer in certain
scenarios. The patch makes sure that incoming buffers are detected
immediately in all situations.
Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add missing exception table entry so that the kernel can handle
proctection exceptions as well on the cs instruction. Currently only
specification exceptions are handled correctly.
The missing entry allows user space to crash the kernel.
Make state change events adjust the correct mask by cleaning up
naming inconsistencies. Also remove chance for lockup by removing
unnecessary mask related check before reading events.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 19 Feb 2008 14:29:31 +0000 (15:29 +0100)]
[S390] etr: fix compile error on !SMP
Since a5fbb6d1064be885d2a6b82f625186753cf74848
"KVM: fix !SMP build error" smp_call_function isn't a define anymore
that folds into nothing but a define that calls up_smp_call_function
with all parameters. Hence we cannot #ifdef out the unused code
anymore...
This seems to be the preferred method, so do this for s390 as well.
arch/s390/kernel/time.c: In function 'etr_sync_clock':
arch/s390/kernel/time.c:825: error: 'clock_sync_cpu_start' undeclared
arch/s390/kernel/time.c:862: error: 'clock_sync_cpu_end' undeclared
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 19 Feb 2008 14:29:30 +0000 (15:29 +0100)]
[S390] qdio: fix qdio_activate timeout handling.
Current code in qdio_activate waits for at least 5 seconds
until it returns. It may return earlier if an error occurs,
but not if everything is ok. This large timeout value
became visible with commit dfa77f611ff295598e218aa0eb6efa73a5cf26d0
"qdio: set QDIO_ACTIVATE_TIMEOUT to 5s", which intended to
fix the timeout value which was zero. In turn setting an
FCP adapter online took 5 seconds.
In practice waiting for 5ms before continuing is sufficient
as pointed out by Utz Bacher and Cornelia Huck.
Cc: Utz Bacher <utz.bacher@de.ibm.com> Cc: Jan Glauber <jan.glauber@de.ibm.com> Cc: Ursula Braun <braunu@de.ibm.com> Cc: Martin Peschke <mp3@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 19 Feb 2008 14:29:29 +0000 (15:29 +0100)]
[S390] Initialize per cpu lowcores on cpu hotplug.
Just copy the first 512 read-only bytes of the current cpu lowcore if
a new cpu gets onlined. The rest is zeroed out and must be explicitly
initialized. Current code just copies the entire lowcore and
initializes the needed fields.
This should reveal bugs in future enhancements quite early.
Also when the lowcore of the first cpu is replaced this is now done
atomically (no interrupts, no machine checks).
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix [ext2_]find_first_[zero_]bit for the corner case of an all clear
or all set bit field by always handling that last word of the bit field
with __ffz_word/__ffs_word.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stefan Weinhuber [Tue, 19 Feb 2008 14:29:27 +0000 (15:29 +0100)]
[S390] dasd: fix locking in __dasd_device_process_final_queue
After setting the status of the cqr and releasing the lock for the
block cqr queue, we call the cqr callback function, which will usually
just trigger the dasd_block_tasklet. But when the tasklet is already
running the cqr might be processed before we invoke the callback
function. In rare cases the callback pointer may already be invalid
by the time we want to call it, which will result in a panic.
Solution: Call the callback function first and then release the lock.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 19 Feb 2008 14:29:26 +0000 (15:29 +0100)]
[S390] Make sure enabled wait psw is loaded in default_idle.
If both NO_IDLE_HZ and VIRT_TIMER are disabled default_idle won't load
an enabled wait psw and busy loop instead. This is because the
idle_chain is empty and the return value of atomic_notifier_call_chain
will be NOTIFY_DONE, which causes default_idle to return instead of
loading an enabled wait psw.
Fix this by calling __atomic_notifier_call_chain instead and add proper
return value handling.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
James Bottomley [Tue, 19 Feb 2008 10:36:57 +0000 (11:36 +0100)]
libata: implement drain buffers
This just updates the libata slave configure routine to take advantage
of the block layer drain buffers. It also adjusts the size lengths in
the atapi code to add the drain buffer to the DMA length so the driver
knows it can rely on it.
I suspect I should also be checking for AHCI as well as ATA_DEV_ATAPI,
but I couldn't see how to do that easily.
tj: * atapi_drain_needed() added such that draining is applied to only
misc ATAPI commands.
* q->bounce_gfp used when allocating drain buffer.
* Now duplicate ATAPI PIO drain logic dropped.
* ata_dev_printk() used instead of sdev_printk().
James Bottomley [Tue, 19 Feb 2008 10:36:56 +0000 (11:36 +0100)]
libata: eliminate the home grown dma padding in favour of
that provided by the block layer
ATA requires that all DMA transfers begin and end on word boundaries.
Because of this, a large amount of machinery grew up in ide to adjust
scatterlists on this basis. However, as of 2.5, the block layer has a
dma_alignment variable which ensures both the beginning and length of a
DMA transfer are aligned on the dma_alignment boundary. Although the
block layer does adjust the beginning of the transfer to ensure this
happens, it doesn't actually adjust the length, it merely makes sure
that space is allocated for transfers beyond the declared length. The
upshot of this is that scatterlists may be padded to any size between
the actual length and the length adjusted to the dma_alignment safely
knowing that memory is allocated in this region.
Right at the moment, SCSI takes the default dma_aligment which is on a
512 byte boundary. Note that this aligment only applies to transfers
coming in from user space. However, since all kernel allocations are
automatically aligned on a minimum of 32 byte boundaries, it is safe to
adjust them in this manner as well.
tj: * Adjusting sg after padding is done in block layer. Make libata
set queue alignment correctly for ATAPI devices and drop broken
sg mangling from ata_sg_setup().
* Use request->raw_data_len for ATAPI transfer chunk size.
* Killed qc->raw_nbytes.
* Separated out killing qc->n_iter.
projects / linux-2.6-omap-h63xx.git / log