David Brownell [Thu, 25 Sep 2008 02:35:56 +0000 (19:35 -0700)]
some drivers switch away from OMAP-specific GPIO calls
This updates most of the OMAP drivers which are in mainline to
switch to using the cross-platform GPIO calls instead of the
older OMAP-specific ones.
This is all fairly brainless/obvious stuff. Probably the
most interesting bit is to observe that the omap-keypad
code seems to now have a portable core that could work with
non-OMAP matrix keypads. (That would improve with hardware
IRQ debouncing enabled, of course...)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tero Kristo [Thu, 25 Sep 2008 12:35:49 +0000 (15:35 +0300)]
PM: Fixed clockdomain state control for OMAP3
Hardware supervised control for clockdomain power state transitions now
enabled in omap3_pm_init(). Also fixed set_pwrdm_state() to allow state
changes between sleep states (i.e. RET<->OFF.)
Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
OMAP3: GPIO: Enable debounce clock only when debounce is enabled v3.
This patch changes gpio "driver" to enable debounce clock for
gpio-bank only when debounce is enabled for some gpio in that bank.
Gpio functional clocks are also renamed in clock tree, gpioX_fck ->
gpioX_dbck.
This patch triggers problem with gpio wake-up and Omap3. Gpios in PER
domain aren't capable to generate wake-up if PER domain is in sleep
state. For this iopad wake-up should be used and needed pad
configuration should be done. Enabling iopad wake-up for gpio pads is
left for bootloader or omap mux configuration in kernel.
Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 24 Sep 2008 11:21:49 +0000 (14:21 +0300)]
ARM: OMAP: Get rid of controller vs slot confusion, initialize MMC devices dynamically
Big MMC init clean up:
- Remove enabled field from slots. It is really intended to mean enabled controller,
not enabled slot. Some controllers can have multiple multiplexed slots connected
to the first controller, such as H4 and N8X0.
- Initialize MMC devices dynamically as suggested by Russell King
- Fix omap1 mmc clock instance numbers
- Also attempt to fix massive omap1 MMC breakage caused by patch 138ab9f8321f67c71984ca43222efa71b0a0a0a9. Remove obviously broken
MMC configurations for now. MMC is still not working for any
omap1 boards.
Don't use __init but __devinit to define probe function. A pointer to
omap_mcbsp_probe is passed to the core via platform_driver_register and
so the function must not disappear when the init code is freed. Using
__init and having HOTPLUG=y the following probably oopses:
While at it move the remove function to the .devexit.text section.
Signed-off-by: Uwe Kleine-König <ukleinek@strlen.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Jarkko Nikula [Tue, 16 Sep 2008 12:56:53 +0000 (15:56 +0300)]
ARM: OMAP: Add RX/TX interrupts for 2430 and 34xx McBSP ports 3-5
Without RX and TX interrupt definitions, the omap_mcbsp_request will
fail on OMAP2430 and OMAP34xx for ports 3-5 since default io_type is
OMAP_MCBSP_IRQ_IO.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Jarkko Nikula [Mon, 22 Sep 2008 13:47:51 +0000 (16:47 +0300)]
ARM: OMAP: Fixes to omap_mcbsp_request function
Bootloader may let McBSP logic running so make sure that block is idle
before requesting IRQs. Also make sure that TX and RX waitqueues are
initialized before request_irq.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Felipe Balbi [Tue, 23 Sep 2008 11:33:50 +0000 (14:33 +0300)]
watchdog: another ioremap() fix
convert to use ioremap() and __raw_{read/write} friends.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Tony Lindgren <tony@atomide.com>
arun c [Sat, 20 Sep 2008 06:51:40 +0000 (02:51 -0400)]
OMAP3EVM: TWL4030 Keypad irq error fix
without this the below error messages were coming continuously
TWL4030 module irq 369 is disabled but can't be masked!
<2>TWL4030 module irq 369 is disabled but can't be masked!
Signed-off-by: Arun C <arunedarath@mistralsolutions.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
David Brownell [Sun, 21 Sep 2008 21:08:47 +0000 (14:08 -0700)]
twl4030: new-style driver conversion
More updates preparing for upstream merge of twl4030 driver:
Basic fixes
- twl4030-core becomes a new-style I2C driver
- declare and use platform_data structure for that core
- stop hard-wiring the irq numbers
- check functionality that's really used: I2C, not SMBus
Cleanup:
- remove needless "client string"
- remove some fake "bool" types
- include catalog part numbers (TPS659{5,3,2}0)
- diagnostics should identify the driver!
To use this, all boards with these chips will need to declare this chip
when they declare their active I2C busses (done in a separate patch).
NOTE: the TWL4030_IRQ_* symbols still need to vanish, along with other
global resource assignments associated with these chips.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Tue, 16 Sep 2008 08:27:35 +0000 (02:27 -0600)]
OMAP3 IRQ: add some missing IRQs for secure peripherals
Add in some missing IRQs for secure peripherals, defined in
OMAP34xx Multimedia High Security Device Silicon Revision 3.0 Security
Addendum Version B (SWPU119B)
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Tue, 16 Sep 2008 14:58:40 +0000 (08:58 -0600)]
OMAP3 clock: add wait for USIM module to become active
This patch adds the register definitions and clock tree fields required
to wait for the USIM module to come out of idle when the USIM clocks are
enabled. Register bit definitions are from the 34xx HS Addendum Rev B.
There, the clock is in fact named "USIM_ICLK".
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Tue, 16 Sep 2008 14:58:34 +0000 (08:58 -0600)]
OMAP2/3 clock: encode target IDLEST bits and clean omap2_clk_wait_ready()
For each OMAP module that has a target IDLEST bit, add the appropriate
bits to the clock tree on both the module interface clock and the appropriate
functional clock. Add a new clock bit, "WAIT_READY", that indicates that
the clock code must wait for the clock's module to come out of idle after
both the target functional clock and interface clocks are enabled. Fix
some clock flag comments while there to indicate that clocks marked
as "3430ES2" clocks also are valid for later 3430 revisions.
Several OMAP3xxx clocks must be split into platform-specific variants,
since some early silicon revisions do not have target idle state bits
available. DSS, HSOTGUSB, and SSI clocks are affected. In the future, it
would be ideal to #ifdef out those clocks for kernels that don't need to
run on 3430ES1 chips to save memory.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Tue, 16 Sep 2008 14:58:33 +0000 (08:58 -0600)]
OMAP2/3 PRCM: convert IDLEST register bit macros to use the _SHIFT/_MASK style
Originally when the PRCM register macros were defined, bit shift macros
used a "_SHIFT" suffix, and mask macros used none. This became a source
of bugs and confusion, as the mask macros were mistakenly used for shift
values. Gradually, the mask macros have been updated, piece by piece,
to add a "_MASK" suffix on the end to clarify. This patch applies this
change to the CM_IDLEST_* register bits.
The patch also adds a few bits that were missing, mostly from the 3430ES1
to ES2 revisions.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Mon, 22 Sep 2008 14:51:14 +0000 (17:51 +0300)]
OMAP2/3 clock: use clk->prcm_mod for all struct clk register addressing
Use the clk->prcm_mod field for all register addresses in struct clk.
Remove all usage of the *_REGADDR() and *_OFFSET() macros from the
clock tree. This eliminates a set of (__force void __iomem *) casts
and removes all of the OMAP2xxx register address rewriting. Shrink
the width of the enable_reg/clksel_reg registers to 16 bits, saving 4
bytes per struct clk.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Thu, 18 Sep 2008 17:47:15 +0000 (11:47 -0600)]
OMAP2/3 clock: convert omap2_wait_clock_ready() to use clk.prcm_mod
Convert omap2_wait_clock_ready() to use clk.prcm_mod rather than a
void __iomem *. This removes some cruft from clock24xx.c and sets
up further cruft removal in a subsequent patch.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Thu, 18 Sep 2008 17:47:06 +0000 (11:47 -0600)]
OMAP2/3 clock: add _omap2_clk_{read,write}_reg()
Create new static functions to read/write registers used in the struct
clk, _omap2_clk_{read,write}_reg(). A subsequent patch will use these
to ensure the correct register read/write instruction is used, which depends
on whether the clock registers are in the CM, PRM, or SCM.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Add a "prcm_mod" field to the struct clk in OMAP2/3, and annotate each
OMAP2xxx real hardware clock controlled by the PRCM with the PRCM
module offset. (A subsequent patch will annotate OMAP3 clocks.)
Add flags for this field that allow the registers to
be marked as existing in the PRM, CM, or System Control Module.
A subsequent patch will use this to simplify register addressing in the
struct clk.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Thu, 18 Sep 2008 17:46:54 +0000 (11:46 -0600)]
OMAP3 clock: split mcbspX_src_fck from mcbspX_fck
McBSP clock source control registers are located in the System Control
Module, not the PRCM. However, the clock enable/disable registers are
in the CM. Since the following patches require all registers in a
struct clk to be in only one of {CM, PRM, SCM}, we must split the
source clock selection into a separate struct clk from the clock
enable/disable control.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Thu, 18 Sep 2008 16:30:34 +0000 (10:30 -0600)]
OMAP3 clock: recalculate DPLL subtree after bypass entry/exit
The DPLL's rate changes when it enters or leaves bypass, so the DPLL's
rate and the rates of all dependent clocks need to be recalculated
when this happens.
Also, fix test for bypass to test against the appropriate bypass clock,
rather than the parent clock (which is not the bypass clock for DPLL1
and DPLL2).
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Thu, 18 Sep 2008 16:30:31 +0000 (10:30 -0600)]
OMAP3 clock: DPLLs should enter bypass if new rate is sys_ck
This patch causes a DPLL to enter bypass when it is instructed to set
its rate to that of its bypass clock. Previously this was only possible
after setting the DPLL rate, then disabling and re-enabling it.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Thu, 18 Sep 2008 16:30:24 +0000 (10:30 -0600)]
OMAP3 clock: move DPLL bypass rate calculation into omap2_get_dpll_rate()
Removes the clksel-based DPLL rate handling from the OMAP3 clock tree.
In its place, omap2_get_dpll_rate() now has code to determine whether the DPLL
is bypassed. This obsoletes several clocks, which are removed by this patch.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Thu, 18 Sep 2008 16:30:05 +0000 (10:30 -0600)]
OMAP3 clock: note the bypass source clock for DPLLs
Most DPLLs use sys_clk as their bypass rate source. But DPLL1 and DPLL2
use high-frequency bypass clocks dpll1_fclk and dpll2_fclk as their parents
during bypass. Add a new struct dpll_data field to track the DPLL's bypass
source clock.
Kevin Hilman <khilman@deeprootsystems.com> helped catch this - thanks Kevin.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Paul Walmsley [Thu, 18 Sep 2008 16:29:58 +0000 (10:29 -0600)]
OMAP3 clock: convert dpll_data.idlest_bit to idlest_mask
Convert struct dpll_data.idlest_bit field to idlest_mask. Needed since
later patches are converting the DPLL bypass state test to use the IDLEST
registers, and OMAP2 uses two bits for DPLL IDLEST rather than one.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Atsushi Nemoto [Tue, 5 Aug 2008 14:45:14 +0000 (23:45 +0900)]
[MIPS] vmlinux.lds.S: handle .text.*
The -ffunction-sections puts each text in .text.function_name section.
Without this patch, most functions are placed outside _text..._etext
area and it breaks show_stacktrace(), etc.
Akinobu Mita [Sat, 13 Sep 2008 10:03:32 +0000 (19:03 +0900)]
mmc_test: initialize mmc_test_lock statically
The mutex mmc_test_lock is initialized at every time mmc_test device
is probed. Probing another mmc_test device may break the mutex, if
the probe function is called while the mutex is locked.
This patch fixes it by statically initializing mmc_test_lock.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
We used to store a binary register snapshot in the "regs" file, so we
set the file size to be the size of this snapshot. This is no longer
valid since we switched to using seq_file.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
The debugfs hook atmci_regs_show allocates a temporary buffer for
storing a register snapshot, but it doesn't free it before returning.
Plug this leak.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Andrew Paprocki [Sat, 20 Sep 2008 08:25:19 +0000 (10:25 +0200)]
hwmon: (it87) Fix fan tachometer reading in IT8712F rev 0x7 (I)
The IT8712F v0.9.1 datasheet applies to revisions >= 0x8 (J).
The driver was incorrectly attempting to enable 16-bit fan
readings on rev 0x7 (I) which led to incorrect RPM values.
Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Tested-by: John Gumb <john.gumb@tandberg.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Commit 4611a77 ("[IA64] fix compile failure with non modular builds")
introduced struct fdesc into asm/elf.h, which duplicates KVM's definition.
Remove the latter to avoid the build error.
Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* git://oss.sgi.com:8090/xfs/linux-2.6:
[XFS] Don't do I/O beyond eof when unreserving space
[XFS] Fix use-after-free with buffers
[XFS] Prevent lockdep false positives when locking two inodes.
[XFS] Fix barrier status change detection.
[XFS] Prevent direct I/O from mapping extents beyond eof
[XFS] Fix regression introduced by remount fixup
[XFS] Move memory allocations for log tracing out of the critical path
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop()
RDMA/nes: Fix client side QP destroy
IB/mlx4: Fix up fast register page list format
mlx4_core: Set RAE and init mtt_sz field in FRMR MPT entries
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: fix deadlock in setting scheduler parameter to zero
sched: fix 2.6.27-rc5 couldn't boot on tulsa machine randomly
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clockevents: make device shutdown robust
clocksource, acpi_pm.c: fix check for monotonicity
clockevents: remove WARN_ON which was used to gather information
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
Fix compile failure with non modular builds
powerpc: Holly board needs dtbImage target
powerpc: Fix interrupt values for DMA2 in MPC8610 HPCD device tree
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 5255/1: Update jornada ssp to remove build errors/warnings
[ARM] omap: back out 'internal_clock' support
[ARM] 5249/1: davinci: remove redundant check in davinci_psc_config()
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc64: Fix SMP bootup with CONFIG_STACK_DEBUG or ftrace.
sparc64: Fix OOPS in psycho_pcierr_intr_other().
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
e100: Use pci_pme_active to clear PME_Status and disable PME#
e1000: prevent corruption of EEPROM/NVM
forcedeth: call restore mac addr in nv_shutdown path
bnx2: Promote vector field in bnx2_irq structure from u16 to unsigned int
sctp: Fix oops when INIT-ACK indicates that peer doesn't support AUTH
sctp: do not enable peer features if we can't do them.
sctp: set the skb->ip_summed correctly when sending over loopback.
udp: Fix rcv socket locking
Manfred Spraul [Wed, 20 Aug 2008 13:39:59 +0000 (15:39 +0200)]
avr32: nmi_enter() without nmi_exit()
While updating the rcu code, I noticed that do_nmi() for AVR32 is odd:
There is an nmi_enter() call without an nmi_exit().
This can't be correct, it breaks rcu (at least the preempt version) and
lockdep.
[haavard.skinnemoen@atmel.com: fixed another case that returned directly] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
On AVR32, all parameters beyond the 5th are passed on the stack. System
calls don't use the stack -- they borrow a callee-saved register
instead. This means that syscalls that take 6 parameters must be called
through a stub that pushes the last parameter on the stack.
This patch adds a stub for sync_file_range syscall on AVR32
architecture. Tested with uClibc snapshot.
md: Don't wait UNINTERRUPTIBLE for other resync to finish
When two md arrays share some block device (e.g each uses different
partitions on the one device), a resync of one array will wait for
the resync on the other to finish.
This can be a long time and as it currently waits TASK_UNINTERRUPTIBLE,
the softlockup code notices and complains.
So use TASK_INTERRUPTIBLE instead and make sure to flush signals
before calling schedule.
e100: Use pci_pme_active to clear PME_Status and disable PME#
Currently e100 uses pci_enable_wake() to clear pending wake-up events
and disable PME# during intitialization, but that function is not
suitable for this purpose, because it immediately returns error code
if device_may_wakeup() returns false for given device.
Make e100 use pci_pme_active(), which carries out exactly the
required operations, instead.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Christopher Li [Fri, 5 Sep 2008 21:04:05 +0000 (14:04 -0700)]
e1000: prevent corruption of EEPROM/NVM
Andrey reports e1000 corruption, and that a patch in vmware's ESX fixed
it.
The EEPROM corruption is triggered by concurrent access of the EEPROM
read/write. Putting a lock around it solve the problem.
[akpm@linux-foundation.org: use DEFINE_SPINLOCK to avoid confusing lockdep] Signed-off-by: Christopher Li <chrisl@vmware.com> Reported-by: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Zach Amsden <zach@vmware.com> Cc: Pratap Subrahmanyam <pratap@vmware.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Yinghai Lu [Sat, 13 Sep 2008 20:10:31 +0000 (13:10 -0700)]
forcedeth: call restore mac addr in nv_shutdown path
after
| commit f735a2a1a4f2a0f5cd823ce323e82675990469e2
| Author: Tobias Diedrich <ranma+kernel@tdiedrich.de>
| Date: Sun May 18 15:02:37 2008 +0200
|
| [netdrvr] forcedeth: setup wake-on-lan before shutting down
|
| When hibernating in 'shutdown' mode, after saving the image the suspend hook
| is not called again.
| However, if the device is in promiscous mode, wake-on-lan will not work.
| This adds a shutdown hook to setup wake-on-lan before the final shutdown.
|
| Signed-off-by: Tobias Diedrich <ranma+kernel@tdiedrich.de>
| Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
my servers with nvidia ck804 and mcp55 will reverse mac address with kexec.
it turns out that we need to restore the mac addr in nv_shutdown().
[akpm@linux-foundation.org: fix typo in printk] Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Tobias Diedrich <ranma+kernel@tdiedrich.de> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Benjamin Li [Thu, 18 Sep 2008 23:46:11 +0000 (16:46 -0700)]
bnx2: Promote vector field in bnx2_irq structure from u16 to unsigned int
The bnx2 driver stores/uses the irq value from the pci_dev internally.
But when it stores the irq value, it has been performing an
integer demotion. Because of the recent changes made to
arch/x86/kernel/io_apic.c, the new method in creating the irq value
(using build_irq_for_pci_dev()) has exposed this bug on x86 systems.
Because of this demotion when calling request_irq() from
bnx2_request_irq(), the driver would get a return code of -EINVAL.
This is because the kernel could not find the requested irq descriptor.
By storing the irq value properly, the kernel can find the correct
irq descriptor and the bnx2 driver can operate normally.
Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sctp: Fix oops when INIT-ACK indicates that peer doesn't support AUTH
If INIT-ACK is received with SupportedExtensions parameter which
indicates that the peer does not support AUTH, the packet will be
silently ignore, and sctp_process_init() do cleanup all of the
transports in the association.
When T1-Init timer is expires, OOPS happen while we try to choose
a different init transport.
The solution is to only clean up the non-active transports, i.e
the ones that the peer added. However, that introduces a problem
with sctp_connectx(), because we don't mark the proper state for
the transports provided by the user. So, we'll simply mark
user-provided transports as ACTIVE. That will allow INIT
retransmissions to work properly in the sctp_connectx() context
and prevent the crash.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sctp: do not enable peer features if we can't do them.
Do not enable peer features like addip and auth, if they
are administratively disabled localy. If the peer resports
that he supports something that we don't, neither end can
use it so enabling it is pointless. This solves a problem
when talking to a peer that has auth and addip enabled while
we do not. Found by Andrei Pelinescu-Onciul <andrei@iptel.org>.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[ARM] 5255/1: Update jornada ssp to remove build errors/warnings
* Adds ssp functions into header so we don't get
"implicit declaration" error at builtime.
* Converts jornada_ssp_start/end functions into voids with
proper declarations (to avoid "prototype..." warning).
* Sorts include files in alphabetical order
* Minor comment changes
Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
sctp: set the skb->ip_summed correctly when sending over loopback.
Loopback used to clobber the ip_summed filed which sctp then used
to figure out if it needed to do checksumming or not. Now that
loopback doesn't do that any more, sctp needs to set the ip_summed
field correctly.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Wed, 17 Sep 2008 19:58:11 +0000 (20:58 +0100)]
[ARM] omap: back out 'internal_clock' support
The structures weren't ready for this change:
arch/arm/plat-omap/devices.c:320: error: 'struct omap_mmc_conf' has no member named 'internal_clock'
arch/arm/plat-omap/devices.c:326: error: implicit declaration of function 'omap_ctrl_readl'
arch/arm/plat-omap/devices.c:326: error: 'OMAP2_CONTROL_DEVCONF0' undeclared (first use in this function)
arch/arm/plat-omap/devices.c:328: error: implicit declaration of function 'omap_ctrl_writel'
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
James Bottomley [Tue, 9 Sep 2008 14:04:18 +0000 (14:04 +0000)]
Fix compile failure with non modular builds
Commit deac93df26b20cf8438339b5935b5f5643bc30c9 ("lib: Correct printk
%pF to work on all architectures") broke the non modular builds by
moving an essential function into modules.c. Fix this by moving it
out again and into asm/sections.h as an inline. To do this, the
definition of struct ppc64_opd_entry has been lifted out of modules.c
and put in asm/elf.h where it belongs.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
projects / linux-2.6-omap-h63xx.git / log