Linus Torvalds [Thu, 8 Mar 2007 03:03:51 +0000 (19:03 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] fsys_getcpu for IA64
[IA64] remove duplicate declaration of efi_initialize_iomem_resources
[IA64] Pick highest possible saved_max_pfn for crash_dump
[IA64] fix NULL pointer in ia64/irq_chip-mask/unmask function
fsys_getcpu performance is largly impacted by whether data (node_to_cpu_map
etc) is in cache. It can take fsys_getcpu up to ~150 itc counts in cold
cache case.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
Tony Luck [Thu, 8 Mar 2007 00:13:25 +0000 (16:13 -0800)]
[IA64] Pick highest possible saved_max_pfn for crash_dump
Berhhard Walle noted that on his HP rx8640 he ended up with saved_max_pfn
smaller than the highest address of system ram in /proc/iomem and proposed
a patch to base the address on the unrounded and unfiltered EFI memory
map address. Simon Horman and Magnus Damm suggested that the whole test
be moved earlier in the function. This is the combination of both of
these patches.
[IA64] fix NULL pointer in ia64/irq_chip-mask/unmask function
This patch fixes boot failure because irq_desc->mask() is NULL.
- Added mask/unmask functions to ia64's irq desc function table.
- rename hw_interrupt_type to irq_chip. hw_interrupt_type is old name.
- Tony: Added same change to arch/ia64/sn/kernel/irq.c as pointed out
by Eric Biederman ... mask/unmask functions there can be no-op.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
Linus Torvalds [Wed, 7 Mar 2007 19:27:53 +0000 (11:27 -0800)]
Merge branch 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32:
avr32: dma-mapping.h
[AVR32] Don't use kmap() in flush_icache_page()
[AVR32] Fix bogus ti->flags manipulation in debug handler
[AVR32] Fix typo in include/asm-avr32/Kbuild
[AVR32] show_trace: Only walk valid stack addresses
[AVR32] at32_spi_setup_slaves should be __init
The following removes an incorrect assertion from the GFS2 glops code. This
fixes Red Hat bz 229873. Thanks to Abhijith Das for testing the patch
and confirming the fix.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Abhijith Das <adas@redhat.com>
The following patch fixes Red Hat bz 229831. Without this patch its
possible for the wrong inode to be returned in certain cases. It is a
pretty unusual event, so that its taken some time to track down. Thanks
and due to Josef Whiter who did a lot of the testing required to thrack
this down and fix it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The below patch fixes a problem where we were not flushing rgrps
correctly. It only occurred in the specific case that a callback was
received for an rgrp which was dirty and when a journal log flush had
not already resulted in the rgrp being flushed anyway. This fixes Red
Hat bz 230143,
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Wendy Cheng [Wed, 28 Feb 2007 16:24:25 +0000 (11:24 -0500)]
[GFS2] pass formal ino in do_filldir_main
ok, the following is the minimum changes to get NFSD going before we
settle down this issue .. would appreciate this in the tree so other NFS
related works can get done in parallel.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Josef Whiter [Fri, 23 Feb 2007 17:49:51 +0000 (12:49 -0500)]
[GFS2] fix hangup when multiple processes are trying to write to the same file
This fixes a problem I encountered while running bonnie++. When you have one
thread that opens a file and starts to write to it, and then another thread that
tries to open and write to the same file, the second thread will loop forever
trying to grab the inode lock for that inode. Basically we come in through
generic_buffered_file_write, which calls gfs2_prepare_write, which then attempts
to grab the glock. Because we don't own the lock, gfs2_prepare_write gets
GLR_TRYFAILED, which returns AOP_TRUNCATED_PAGE to generic_buffered_file_write.
At this point generic_buffered_file_write loops around again and immediately
retries the prepare_write. This means that the second process never gets off of
the processor in order to allow the process that holds the lock to finish its
work and let go of the lock. This patch makes gfs2_glock_nq schedule() if it
gets back a GLR_TRYFAILED, which resolves this problem.
Signed-off-by: Josef Whiter <jwhiter@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Wendy Cheng [Fri, 23 Feb 2007 05:21:17 +0000 (00:21 -0500)]
[GFS2] NFS filehandle check
File handle checking error found in '07 NFS connectathon. The fh_type
and fh_len are not necessarily identical. Some of the client machines
could fail mount with stale filehandle without this patch.
Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Kill off I/O cruft for R7780RP.
sh: Revert lazy dcache writeback changes.
sh: Enable SM501 support for RTS7751R2D.
sh: Use L1_CACHE_BYTES for .data.cacheline_aligned.
sysctl: Support vdso_enabled sysctl on SH.
sh: Fix kernel thread stack corruption with preempt.
doc: Add SH to vdso and earlyprintk in kernel-parameters.txt
sh: Fix sigmask trampling in signal delivery.
sh: Clear UBC when not in use.
Ingo Molnar [Wed, 7 Mar 2007 17:12:31 +0000 (18:12 +0100)]
[PATCH] CPU hotplug: call check_tsc_sync_source() with irqs off
check_tsc_sync_source() depends on being called with irqs disabled (it
checks whether the TSC is coherent across two specific CPUs). This is
incidentally true during bootup, but not during cpu hotplug __cpu_up().
This got found via smp_processor_id() debugging.
disable irqs explicitly and remove the unconditional enabling of
interrupts. Add touch_nmi_watchdog() to the cpu_online_map busy loop.
Gary Zambrano [Sat, 3 Mar 2007 00:57:46 +0000 (16:57 -0800)]
avr32: dma-mapping.h
Added dma_sync_single_range_for_cpu/device to dma-mapping.h in asm-avr32 to
call dma_sync_single_for_cpu/device. This patch enables b44 to compile on
systems with these cpus. This patch was created with the assumption that
another method of dma_sync_single_range_for_cpu/device does not exist on these
architectures.
Signed-off by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
[AVR32] show_trace: Only walk valid stack addresses
Terminate the frame pointer walk if (a) the address is outside the
task's kernel stack or (b) if the frame pointer isn't monotonically
increasing. Without this fix, show_trace() may enter an infinite
loop, walking through random data anywhere in memory.
Since any address within the kernel stack is guaranteed to be valid,
we may eliminate the __get_user() calls as well.
Linus Torvalds [Wed, 7 Mar 2007 03:52:50 +0000 (19:52 -0800)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] cio: Call cancel_halt_clear even when actl == 0.
[S390] cio: Use path verification to check for path state.
[S390] cio: Fix locking when calling notify function.
[S390] Fixed handling of access register mode faults.
[S390] dasd: Use default recovery for SNSS requests
[S390] check_bugs() should be inline.
[S390] tape: Compression overwrites crypto setting
[S390] nss: disable kexec.
[S390] reipl: move dump_prefix_page out of text section.
[S390] smp: disable preemption in smp_call_function/smp_call_function_on
[S390] kprobes breaks BUG_ON
Linus Torvalds [Wed, 7 Mar 2007 03:44:13 +0000 (19:44 -0800)]
Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
pata_pdc202xx_old: fix data corruption and other problems
pata_legacy: fix io/irq mismatch
ahci: RAID mode SATA patch for Intel ICH9M
The commit was buggy in multiple ways:
- the conversion to ilog2() was incorrect to begin with
- it tested the wrong #defines, so on all architectures but FRV you'd
never see the bug except for constant arguments.
- the new "get_order()" macro used its arguments multiple times, and
didn't even parenthesize them properly
- despite the comments, it was not true that you could use it for
constant initializers, since not all architectures even use the
generic page.h header file.
All of the problems are individually fixable, but it all boils down to:
better just revert it, and re-do it from scratch.
Cc: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 7 Mar 2007 02:05:10 +0000 (18:05 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] kexec: Use EFI_LOADER_DATA for ELF core header
[IA64] permon use-after-free fix
[IA64] sync compat getdents
[IA64] always build arch/ia64/lib/xor.o
[IA64] Remove stack hard limit on ia64
[IA64] point saved_max_pfn to the max_pfn of the entire system
Revert "[IA64] swiotlb abstraction (e.g. for Xen)"
Marcel Holtmann [Tue, 6 Mar 2007 21:12:00 +0000 (22:12 +0100)]
[PATCH] Fix buffer overflow in Omnikey CardMan 4040 driver (CVE-2007-0005)
Based on a patch from Don Howard <dhoward@redhat.com>
When calling write() with a buffer larger than 512 bytes, the
driver's write buffer overflows, allowing to overwrite the EIP and
execute arbitrary code with kernel privileges.
In read(), there exists a similar problem, but coming from the device.
A malicous or buggy device sending more than 512 bytes can overflow
of the driver's read buffer, with the same effects as above.
sysfs_write_file downs buffer->sem while calling flush_write_buffer, and
flushing that particular write buffer entails downing buffer->sem in
orphan_all_buffers, resulting in the obvious self-deadlock.
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] cifs_prepare_write was incorrectly rereading page in some cases
[CIFS] Fix set file size to zero when doing chmod to Samba 3.0.26pre
[CIFS] Remove some unused functions/declarations
[CIFS] New file for previous commit
[CIFS] cifs export operations
[CIFS] small piece missing from previous patch
[CIFS] Fix locking problem around some cifs uses of i_size write
Linus Torvalds [Wed, 7 Mar 2007 01:31:29 +0000 (17:31 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
sdhci: release irq during suspend
sdhci: make isr tolerant of read errors
mmc: require explicit support for high-speed
ncpfs: make sure server connection survives a kill
Linus Torvalds [Wed, 7 Mar 2007 01:30:59 +0000 (17:30 -0800)]
Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
sis900 warning fixes
mv643xx_eth: Place explicit port number in mv643xx_eth_platform_data
pcnet32: Fix PCnet32 performance bug on non-coherent architecutres
__devinit & __devexit cleanups for de2104x driver
3c59x: Handle pci_enable_device() failure while resuming
dmfe: Fix link detection
dmfe: fix two bugs
dmfe: trivial/spelling fixes
revert "drivers/net/tulip/dmfe: support basic carrier detection"
ucc_geth: returns NETDEV_TX_BUSY when BD ring is full
ucc_geth: Fix BD processing
natsemi: netpoll fixes
bonding: Improve IGMP join processing
bonding: only receive ARPs for us
bonding: fix double dev_add_pack
Magnus Damm [Tue, 6 Mar 2007 10:34:26 +0000 (02:34 -0800)]
[IA64] kexec: Use EFI_LOADER_DATA for ELF core header
The address where the ELF core header is stored is passed to the secondary
kernel as a kernel command line option. The memory area for this header is
also marked as a separate EFI memory descriptor on ia64.
The separate EFI memory descriptor is at the moment of the type
EFI_UNUSABLE_MEMORY. With such a type the secondary kernel skips over the
entire memory granule (config option, 16M or 64M) when detecting memory.
If we are lucky we will just lose some memory, but if we happen to have
data in the same granule (such as an initramfs image), then this data will
never get mapped and the kernel bombs out when trying to access it.
So this is an attempt to fix this by changing the EFI memory descriptor
type into EFI_LOADER_DATA. This type is the same type used for the kernel
data and for initramfs. In the secondary kernel we then handle the ELF
core header data the same way as we handle the initramfs image.
This patch contains the kernel changes to make this happen. Pretty
straightforward, we reserve the area in reserve_memory(). The address for
the area comes from the kernel command line and the size comes from the
specialized EFI parsing function vmcore_find_descriptor_size().
The kexec-tools-testing code for this can be found here:
http://lists.osdl.org/pipermail/fastboot/2007-February/005983.html
Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Cc: Simon Horman <horms@verge.net.au> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
Nick Piggin [Tue, 6 Mar 2007 10:34:25 +0000 (02:34 -0800)]
[IA64] permon use-after-free fix
Perfmon associates vmalloc()ed memory with a file descriptor, and installs
a vma mapping that memory. Unfortunately, the vm_file field is not filled
in, so processes with mappings to that memory do not prevent the file from
being closed and the memory freed. This results in use-after-free bugs and
multiple freeing of pages, etc.
I saw this bug on an Altix on SLES9. Haven't reproduced upstream but it
looks like the same issue is there.
Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Stephane Eranian <eranian@hpl.hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
Always build ia64 xor.o because multiple config options now depend on it.
Necessary to build .20-mm* on ia64 when, e.g., CONFIG_ASYNC_TX_DMA is
defined. Don't know if '_ASYNC_TX_DMA makes sense on ia64. If not, maybe
Kconfig should preclude it.
Could have defined a Kconfig option that defaults to true if MD_RAID456 ||
ASYNC_TX_DMA to control building of xor.o, but xor.o is only 848 bytes and
this IS ia64...
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Bob Picco <bob.picco@hp.com> Cc: Eric Whitney <eric.whitney@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
Horms [Tue, 6 Mar 2007 10:34:21 +0000 (02:34 -0800)]
[IA64] point saved_max_pfn to the max_pfn of the entire system
Make saved_max_pfn point to max_pfn of entire system.
Without this patch is so that vmcore is zero length on ia64. This is
because saved_max_pfn was wrongly being set to the max_pfn of the crash
kernel's address space, rather than the max_pfg on the physical memory of
the machine - the whole purpose of vmcore is to access physical memory that
is not part of the crash kernel's addresss space.
Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Zou Nan hai <nanhai.zou@intel.com> Sort-Of-Acked-By: Jay Lan <jlan@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
Gerrit Renker [Tue, 6 Mar 2007 22:24:44 +0000 (14:24 -0800)]
[DCCP]: Set RTO for newly created child socket
This mirrors a recent change in tcp_open_req_child, whereby the icsk_rto of the
newly created child socket was not set (but rather on the parent socket). Same
fix for DCCP.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Tue, 6 Mar 2007 22:24:18 +0000 (14:24 -0800)]
[DCCP]: Correctly split CCID half connections
This fixes a bug caused by a previous patch, which causes DCCP servers in
LISTEN state to not receive packets.
This patch changes the logic so that
* servers in either LISTEN or OPEN state get the RX half connection packets
* clients in OPEN state get the TX half connection packets
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Tue, 6 Mar 2007 21:44:06 +0000 (13:44 -0800)]
[NET]: Fix compat_sock_common_getsockopt typo.
This patch fixes a typo in compat_sock_common_getsockopt.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
A backlog value of N really does mean allow "N + 1" connections
to queue to a listening socket. This allows one to specify
"0" as the backlog and still get 1 connection.
Noticed by Gerrit Renker and Rick Jones.
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the outdated and inaccurate description of the software suspend in
Kconfig.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Banks [Tue, 6 Mar 2007 09:42:23 +0000 (01:42 -0800)]
[PATCH] knfsd: provide sunrpc pool_mode module option
Provide a module param "pool_mode" for sunrpc.ko which allows a sysadmin to
choose the mode for mapping NFS thread service pools to CPUs. Values are:
auto choose a mapping mode heuristically
global (default, same as the pre-2.6.19 code) a single global pool
percpu one pool per CPU
pernode one pool per NUMA node
Note that since 2.6.19 the hardcoded behaviour has been "auto", this patch
makes the default "global".
The pool mode can be changed after boot/modprobe using /sys, if the NFS and
lockd services have been shut down. A useful side effect of this change is to
fix a small memory leak when unloading the module.
Signed-off-by: Greg Banks <gnb@melbourne.sgi.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Tue, 6 Mar 2007 09:42:22 +0000 (01:42 -0800)]
[PATCH] knfsd: fix recently introduced problem with shutting down a busy NFS server
When the last thread of nfsd exits, it shuts down all related sockets. It
currently uses svc_close_socket to do this, but that only is immediately
effective if the socket is not SK_BUSY.
If the socket is busy - i.e. if a request has arrived that has not yet been
processes - svc_close_socket is not effective and the shutdown process spins.
So create a new svc_force_close_socket which removes the SK_BUSY flag is set
and then calls svc_close_socket.
Also change some open-codes loops in svc_destroy to use
list_for_each_entry_safe.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Tue, 6 Mar 2007 09:42:22 +0000 (01:42 -0800)]
[PATCH] knfsd: remove CONFIG_IPV6 ifdefs from sunrpc server code
They don't really save that much, and aren't worth the hassle.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Tue, 6 Mar 2007 09:42:21 +0000 (01:42 -0800)]
[PATCH] knfsd: use recv_msg to get peer address for NFSD instead of code-copying
The sunrpc server code needs to know the source and destination address for
UDP packets so it can reply properly. It currently copies code out of the
network stack to pick the pieces out of the skb. This is ugly and causes
compile problems with the IPv6 stuff.
So, rip that out and use recv_msg instead. This is a much cleaner interface,
but has a slight cost in that the checksum is now checked before the copy, so
we don't benefit from doing both at the same time. This can probably be
fixed.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 6 Mar 2007 09:42:20 +0000 (01:42 -0800)]
[PATCH] uml: comment the initialization of a global
Comment the fact that sig_info is initialized early in boot, and thus doesn't
need any locking.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 6 Mar 2007 09:42:19 +0000 (01:42 -0800)]
[PATCH] uml: add a debugging message
Add a debugging message in the case that mapping a stub fails.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 6 Mar 2007 09:42:18 +0000 (01:42 -0800)]
[PATCH] uml: fix formatting violations in signal delivery code
Fix a few formatting bugs in the signal code.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Tue, 6 Mar 2007 09:42:17 +0000 (01:42 -0800)]
[PATCH] linux/audit.h needs linux/types.h
Include linux/types.h here because we need a definition of __u32. This file
appears not be exported verbatim by libc, so I think this doesn't have any
userspace consequences.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[PATCH] cciss: add struct pci_driver shutdown support (replaces reboot notifier)
This patch adds support for the struct pci_driver shutdown method to cciss.
We require notification of an impending reboot or shutdown so that we can
flush the battery backed write cache (BBWC) on the Smart Array controller.
Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch changes the way we determine if a logical volume is larger than
2TB.
The original test looked for a total_size of 0. Originally we added 1 to the
total_size. That would make our read_capacity return size 0 for >2TB lv's.
We assumed that we could not have a lv size of 0 so it seemed OK until we were
in a clustered system. The backup node would see a size of 0 due to the
reservation on the drive. That caused the driver to switch to 16-byte CDB's
which are not supported on older controllers. After that everything was
broken.
It may seem petty but I don't see the value in trying to determine if the LBA
is beyond the 2TB boundary. That's why when we switch we use 16-byte CDB's
for all read/write operations. Please consider this for inclusion.
Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Josh Triplett [Tue, 6 Mar 2007 09:42:13 +0000 (01:42 -0800)]
[PATCH] Publish rcutorture module parameters via sysfs, read-only
rcutorture's module parameters currently use permissions of 0, so they
don't show up in /sys/module/rcutorture/parameters. Change the permissions
on all module parameters to world-readable (0444).
rcutorture does all of its initialization and thread startup when loaded
and relies on the parameters not changing during execution, so they should
not permit writing. However, reading seems fine.
Signed-off-by: Josh Triplett <josh@freedesktop.org> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Walker [Tue, 6 Mar 2007 09:42:11 +0000 (01:42 -0800)]
[PATCH] fix vsyscall settimeofday
I've only seen this on x86_64.
The vsyscall state only gets updated when a timer interrupts comes in. So
if the time is set long before the next timer, there will be a period when
a gettimeofday() won't reflect the correct time.
I added an explicit update_vsyscall() during the settimeofday(), that way
the vsyscall state doesn't get stale.
Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Tue, 6 Mar 2007 09:42:08 +0000 (01:42 -0800)]
[PATCH] highres: do not run the TIMER_SOFTIRQ after switching to highres mode
The TIMER_SOFTIRQ runs the hrtimers during bootup until a usable
clocksource and clock event sources are registered. The switch to high
resolution mode happens inside of the TIMER_SOFTIRQ, but runs the softirq
afterwards. That way the tick emulation timer, which was set up in the
switch to highres might be executed in the softirq context, which is a BUG.
The rbtree has not to be touched by the softirq after the highres switch.
This BUG was observed by Andres Salomon, who provided the information to
debug it.
Return early from the softirq, when the switch was sucessful.
[dilinger@debian.org: add debug warning]
[akpm@linux-foundation.org: make debug warning compile] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andres Salomon <dilinger@debian.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andres Salomon [Tue, 6 Mar 2007 09:42:05 +0000 (01:42 -0800)]
[PATCH] i386: make x86_64 tsc header require i386 rather than vice-versa
Prior to commit 95492e4646e5de8b43d9a7908d6177fb737b61f0 ([PATCH] x86:
rewrite SMP TSC sync code), the headers in asm-i386 did not really require
anything in include/asm-x86_64. This means that distributions such as
fedora did not include asm-x86_64 in kernel-devel headers for i386. Ingo's
commit changed that, and broke things. This is easy enough to hack around
in package builds by just including asm-x86_64 on i386, but that's kind of
annoying. If anything, x86_64 should depend upon i386, not the other way
around.
This patch changes it so that asm-x86_64/tsc.h includes asm-i386/tsc.h,
rather than vice-versa.
Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Lord [Tue, 6 Mar 2007 09:42:03 +0000 (01:42 -0800)]
[PATCH] Fix 2.6.21 rfcomm lockups
Any attempt to open/use a bluetooth rfcomm device locks up
scheduling completely on my machine.
Interrupts (ping, alt-sysrq) seem to be alive, but nothing else.
This was working fine in 2.6.20, broken now in 2.6.21-rc2-git*
Reverting this change (below) fixes it:
| author Marcel Holtmann <marcel@holtmann.org>
| Sat, 17 Feb 2007 22:58:57 +0000 (23:58 +0100)
| committer David S. Miller <davem@sunset.davemloft.net>
| Mon, 26 Feb 2007 19:42:41 +0000 (11:42 -0800)
| commit c1a3313698895d8ad4760f98642007bf236af2e8
| tree 337a876f727061362b6a169f8759849c105b8f7a tree | snapshot
| parent f5ffd4620aba9e55656483ae1ef5c79ba81f5403 commit | diff
| | [Bluetooth] Make use of device_move() for RFCOMM TTY devices
| | In the case of bound RFCOMM TTY devices the parent is not available
| before its usage. So when opening a RFCOMM TTY device, move it to
| the corresponding ACL device as a child. When closing the device,
| move it back to the virtual device tree.
| Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The simplest fix for this bug is to prevent sysfs_move_dir()
from self-deadlocking when (old_parent == new_parent).
This patch prevents total system lockup when using rfcomm devices.
Signed-off-by: Mark Lord <mlord@pobox.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Tue, 6 Mar 2007 09:42:01 +0000 (01:42 -0800)]
[PATCH] atyfb: fix kconfig error part 2
Fix implicit declarations and missing code in atyfb.
drivers/video/aty/atyfb_base.c:2137: warning: implicit declaration of function 'a
ty_ld_lcd'
drivers/video/aty/atyfb_base.c:2154: warning: implicit declaration of function 'a
ty_st_lcd'
atyfb_base.c:(.text+0x33e5c): undefined reference to `aty_ld_lcd'
atyfb_base.c:(.text+0x33eb2): undefined reference to `aty_st_lcd'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6-omap-h63xx.git / log