Takashi Iwai [Fri, 27 Feb 2009 16:52:22 +0000 (17:52 +0100)]
ALSA: hda - Fix an "unused variable" compile warning
Forgot to remove an unused variable.
sound/pci/hda/patch_realtek.c: In function ‘alc882_auto_init_analog_input’:
sound/pci/hda/patch_realtek.c:7018: warning: unused variable ‘vref’
Takashi Iwai [Thu, 26 Feb 2009 15:50:43 +0000 (16:50 +0100)]
ALSA: hda - Add model=auto for STAC/IDT codecs
Added the model=auto to STAC/IDT codecs to use the BIOS default setup
explicitly. It can be used to disable the device-specific model quirk
in the driver.
Hannes Eder [Wed, 25 Feb 2009 21:28:45 +0000 (22:28 +0100)]
ALSA: sound/pci/hda: fix sparse warning: different signedness
Fix this sparse warning:
sound/pci/hda/hda_codec.c:1544:19: warning: incorrect type in assignment (different signedness)
sound/pci/hda/hda_codec.c:1544:19: expected unsigned long *vals
sound/pci/hda/hda_codec.c:1544:19: got long *<noident>
Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Force speaker pin config with model=hp-dv5 model for cases when bios
doesn't set it up properly. All reported hp laptops using model=hp-dv5
model have speaker at pin 0x0d with same config, so it's safe to add
this within hp-dv5 model.
Reference: alsa-devel mailing list thread on
http://mailman.alsa-project.org/pipermail/alsa-devel/2009-February/014390.html
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 13 Feb 2009 10:19:09 +0000 (11:19 +0100)]
ALSA: hda - Support multiple digital outs with auto-probing
Added the support of multiple digital outputs via auto-probing for
Realtek ALC88x codecs. The multiple outputs are handled as slave
streams, so only one PCM stream (and the corresponding IEC958*
elements) is provided to control both digital outputs.
Takashi Iwai [Fri, 13 Feb 2009 10:32:28 +0000 (11:32 +0100)]
ALSA: hda - Add snd_hda_multi_out_dig_cleanup()
Added the helper function snd_hda_multi_out_dig_cleanup() to clean up
the digital outputs with multi setup. This call is needed in cases
the codec supports multiple digital outputs as slaves. Otherwise the
slave widgets aren't properly cleaned up.
For a single digital output (e.g. in patch_conexant.c), this call isn't
needed.
Takashi Iwai [Fri, 13 Feb 2009 08:31:20 +0000 (09:31 +0100)]
ALSA: hda - Add quirk for Acer AX1700-U3700A
Force model=auto for Acer AX1700-U3700A with ALC888 codec.
Since Acer devices are handlded as model=acer as default, the auto
parsing has to be specified explicitly.
(Maybe it's better rather to remove this default model=acer handling,
though.)
ALSA: hda - Change HP dv7 (103c:30f4) quirk from hp-m4 to hp-dv5 model
Change HP dv7 quirk: although reported to work with hp-m4 model
(https://bugzilla.novell.com/show_bug.cgi?id=445321), the original
report doesn't contain info about testing of internal microphone.
Recently I received a report about internal mic not working
(https://qa.mandriva.com/show_bug.cgi?id=44855#c193), this must be
related with the forced line in on pin 0x0e done with hp-m4 model. Thus
change the current quirk from STAC_HP_M4 to STAC_HP_DV5, later reported
to be fixed on a provided kernel with this change
(https://qa.mandriva.com/show_bug.cgi?id=44855#c196).
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the HP connector on X200 dock doesn't detect when a HP is connected
nor allows sound to be played using it. This patch fixes the problem by adding
a quirk for this specific model. It's possible that others have the same NID
(0x19) to report when dock HP is connected, but I don't have access to any.
Please Cc me in the reply since I'm not subscribed to alsa-devel@.
Matthew Ranostay [Thu, 12 Feb 2009 21:50:01 +0000 (16:50 -0500)]
ALSA: hda: Add STAC_DELL_S14 quirk
Add STAC_DELL_S14 quirk for new laptop series. Removed un-needed pins
in pin_nids for stac92hd83xxx. Also reorganized connection selection
code for the respective ports per quirk define.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 13 Feb 2009 07:16:55 +0000 (08:16 +0100)]
ALSA: hda - Allow fixed codec-probe mask
Some devices have broken BIOS and they don't set the codec probe-bit
properly after cleared by the driver. This makes the driver skipping
the necessary codec slots.
Since BIOS update isn't always easy, now the semantics of probe_mask
option is changed a bit. When it contains the bit 8 (0x100), the
lower bits are used to probe that slots regardless of codec-probe bits
returned by the hardware.
For example, probe_mask=0x103 will force to probe the codec slot #0
and #1.
ALSA: hda - Cleanup setting of pin_configs in patch_stac927x
After commit "ALSA: hda - Fix restore of pin configs at resume for
STAC/IDT codecs", the introduced stac_save_pin_cfgs function checks
already for pins == NULL case, saving then default pin configs from
machine with stac92xx_save_bios_config_regs. So we can remove the
extra checks when stac927x_brd_tbl[spec->board_config] == NULL.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Wu Fengguang [Wed, 11 Feb 2009 07:22:29 +0000 (15:22 +0800)]
ALSA: hda - enable HDMI audio pin out at module loading time
We found that enabling/disabling HDMI audio pin out at stream start/stop
time will kill the leading 500ms or so sound samples. Avoid this by enabling
pin out once and for ever at module loading time.
The leading ~500ms audio samples will still be lost when switching from
X-channel playback to Y-channel playback where X != Y. However there's no
much we can do about it: the audio infoframe has to change and it looks like
either G45 or YAMAHA requires some time to switch the configuration.
Wu Fengguang [Wed, 11 Feb 2009 07:22:28 +0000 (15:22 +0800)]
ALSA: hda - allow multi-channel HDMI audio playback when ELD is not present
The YAMAHA AV-X1800 requires audio infoframe to include speaker-channel
mapping to play >2 channel HDMI audio. In theory that mapping should be
derived from its speaker configurations contained in its ELD. However we
currently cannot get ELD in console before the KMS functionalities are ready.
This is a more or less general issue at least in the near future. As a
workaround, we propose to allow playback of mult-channel audio when ELD
is not available.
Takashi Iwai [Tue, 10 Feb 2009 10:56:44 +0000 (11:56 +0100)]
ALSA: hda - add digital beep support for ALC268
Added the digital beep support for ALC268. It was missing in the
last patches.
However, ALC268 has a strange pin use for widget 0x1d, which could be
used as another purpose. So, the patch adds a check of the beep control
before creating the hook for input layer.
ALSA: hda - Don't touch non-existent port f on 4-port 92hd71bxx codecs
When checking for input amps on pins 0x0a, 0x0d and 0x0f, and
initializing them for 92hd71xxx codec models, we must skip nid 0x0f
for 4-port models too like with 5-port models, as it is unused
(nid 0x0f is vendor reserved in 4-port models).
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: hda - Dynamic detection of dmics/dmuxes/smuxes in stac92hd71bxx
Detect the number of connected ports and number of smuxes dynamically,
looking at pin configs, using new introduced functions
stac92hd71bxx_connected_ports and stac92hd71bxx_connected_smuxes. Also
use proper input mux configuration for 4port and 5port models.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: hda - Additional pin nids for STAC92HD71Bx and STAC92HD75Bx codecs
Current code for STAC92HD71Bx and STAC92HD75Bx doesn't consider pin
complexes 0x20 and 0x27. Also for 4 port models, nids 0x0e and 0x0f
are vendor reserved. This commit changes code so it'll consider the
additional pin complexes for models that have it, and avoid reserved
nids to be touched on 4 port models.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 5 Feb 2009 06:34:28 +0000 (07:34 +0100)]
ALSA: hda - Fix misc workqueue issues
Some fixes regarding snd-hda-intel workqueue:
- Use create_singlethread_workqueue() instead of create_workqueue()
as per-CPU work isn't required.
- Allocate workq name string properly
- Renamed the workq name to "hd-audio*" to be more obvious.
Tony Vroon [Tue, 3 Feb 2009 11:13:34 +0000 (11:13 +0000)]
ALSA: Document tyan model for Realtek ALC262
As just pointed out to me, the new tyan model for ALC262 was
implemented but not documented. This adds the board to the
list, using both its marketing name (Thunder n6650W) and its
model number (S2915-E).
Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tony Vroon [Mon, 2 Feb 2009 19:01:30 +0000 (19:01 +0000)]
ALSA: hda - Add tyan model for Realtek ALC262
The Realtek ALC262 on the Tyan Thunder n6650W (S2915-E) mainboard has a
rather odd configuration template. As a result, the white AUX connector
can not be used. This rewrites the default config to more accurately
reflect the connector layout, colour and function.
Unfortunately the black CD_IN connector, which is suspected to be widget
0x1c refuses to switch into input (0x20), instead opting to remain on 0x0.
As such, no mixer controls are exposed for it. Autoswitching is implemented
between the front headphone output and back line output.
Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 2 Feb 2009 10:37:03 +0000 (11:37 +0100)]
ALSA: hda - No widget selection for volume knob widgets in proc output
Volume-knob widgets have no widget selection although they have widget
connections. Thus, the connection list in the proc output shouldn't
contain the selection (*).
ALSA: hda - make alc882_auto_init_input_src aware of selectors
In the case of having a selector instead of mixer while initing input
sources, the case that happens with ALC889, we must select instead
of muting input. Problem was found while testing with hda-emu.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Wed, 28 Jan 2009 17:01:42 +0000 (09:01 -0800)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup code
powerpc/pseries: Correct VIO bus accounting problem in CMO env.
powerpc: More printing warning fixes for the l64 to ll64 conversion
powerpc: Remove arch/ppc cruft from Kconfig
powerpc: Printing fix for l64 to ll64 conversion: phyp_dump.c
powerpc/embedded6xx: Update defconfigs
powerpc/8xx: Update defconfigs
powerpc/86xx: Update defconfigs
powerpc/83xx: Update defconfigs
powerpc/85xx: Update defconfigs
powerpc/mpc8313erdb: fix kernel panic because mdio device is not probed
powerpc/4xx: Update multi-board PowerPC 4xx defconfigs
powerpc/44x: Update PowerPC 44x defconfigs
powerpc/40x: Update PowerPC 40x defconfigs
powerpc/85xx: Fix typo in mpc8572ds dts
powerpc/44x: Warp patches for the new NDFC driver
powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info
projects / linux-2.6-omap-h63xx.git / log