V4L/DVB (9922): em28xx: don't assume every eb1a:2820 reference design is a Prolink PlayTV USB2

Don't operate under the assumption that every device that uses the em2820
default USB ID is a Prolink PlayTV USB.  We have an eeprom hash, so use that,
since otherwise we cannot support other devices with the 2820 default USB ID
(such as the ADS Tech Instant TV USB USBAV-704)

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9921): em28xx: add chip id for em2874

Add the em2870 to the list of known em28xx chip ids.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9918): cx88: advise/acquire clean-up for HVR-1300/3000/4000

This cleans-up the advise/acquire methods.

This has been tested on the hvr-1300/4000 and assumed to be
correct on the hvr-3000.

This update also fixes analogue tuning on the hvr-1300
when in blackbird mode.

Signed-off-by: Darron Broad <darron@kewl.org>
Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9917): cx24116: change to ALGO_HW

Slow tuning, EG:

> szap-s2 -r -c 39.FTATV "1=Pgm1;Net1"
reading channels from file '39.FTATV'
zapping to 3 '1=Pgm1;Net1':
delivery DVB-S, modulation QPSK
sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35
vpid 0x0200, apid 0x0300, sid 0x0001
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal c2c0 | snr 0000 | ber 00012d4a | unc 00000000 |
status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal c040 | snr bb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Appears to be resolved by dropping zig-zag tuning and relying on
hardware only:

> szap-s2 -r -c 39.FTATV "1=Pgm1;Net1"
reading channels from file '39.FTATV'
zapping to 3 '1=Pgm1;Net1':
delivery DVB-S, modulation QPSK
sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35
vpid 0x0200, apid 0x0300, sid 0x0001
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c040 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Tuning to a weaker channel shows that the hardware recovers sync:

status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 03 | signal fd40 | snr 5000 | ber 00000000 | unc 00000000 |
status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 03 | signal fd80 | snr 5000 | ber 00000000 | unc 00000000 |
status 01 | signal fd80 | snr 4e66 | ber 00000000 | unc 00000000 |
status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 03 | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 |
status 01 | signal fd80 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Also, tuning, moving the dish and then restoring the dish also retunes.

Signed-off-by: Darron Broad <darron@kewl.org>
Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9916): dvb-core: don't add an event when in ONE SHOT mode for algo type HW

It has been noticed that in HW tuning mode in cx24123.c that
a check is made to not alter the status var when in one shot
mode, a simpler solution is to not update here for all cards.

Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9915): cx24116: fix retune regression introduced in 70ee86a7c630

Thanks to AKPM for spotting this.

Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9914): cx24116: bugfix: add missing delsys in FEC lookup

Delsys was missing when searching for FEC in table.

This fixes FEC lookup for DVB-S2 QPSK modulation.

Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9913): tuner-xc2028: allow printing stack trace as debug on sleep code

tuner-xc3028 can be put to sleep to save power. However, if not properly
recovered from sleep, the device won't work. It is noticed that some
devices doesn't recover properly, so let's add a dump_stack() as a debug
option, to allow us to track when this happens.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9912): em28xx: fix/improve em28xx locking schema

Changes/fixes on em28xx dev->lock:

- em28xx_init_dev() were unlocking without a previous lock;

- some read ioctls need to lock after the removal of KBL, since a write
  may be happening at the same time an ioctl is reading;

- keep the device locked during all device initialization;

- lock/unlock while reading/writing registers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9911): em28xx: vidioc_try_fmt_vid_cap() doesn't need any lock

vidioc_try_fmt_vid_cap() just checks if a given resolution is supported.
It doesn't touch on struct em28xx device descriptor. so, there's no need
to lock.

While there, use unlikely() for those values that aren't likely to
occur.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9910): em28xx: move res_get locks to the caller routines

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9909): em28xx: move dev->lock from res_free to the caller routines

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9905): v4l2-compat32: add missing newline after kernel message

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9904): v4l: fix compile warning.

Fix (bogus) compile warning about uninitialized variable.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9903): uvcvideo: V4L2 zoom controls support

Add support for absolute and continuous zoom controls (mapped to absolute
and relative UVC zoom controls).

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9902): uvcvideo: V4L2 privacy control support

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9899): v4l2: Add missing control names

Update v4l2_ctrl_get_name() and v4l2_ctrl_get_menu() with missing
control names and menu values.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9898): v4l2: Add privacy control

The privacy control prevents video from being acquired by the camera. A true
value indicates that no image can be captured. Devices that implement the
privacy control must support read access and may support write access.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9897): v4l2: Add camera zoom controls

The zoom controls move the zoom lens group to a an absolute position, as a
relative displacement or at a given speed until reaching physical device
limits. Positive values move the zoom lens group towards the telephoto
direction, negative values towards the wide-angle direction.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9895): cx18: Refine the firmware load and firmware startup process

Refine the firmware load and firmware startup process.  Significant changes
are to ensure the SCB and IPC area are correct before starting up the firmware,
and letting the CPU firmware start up the APU firmware for us.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9894): cx18: Use a known open task handle when setting stream CX2341x parameters

cx18: Use a known open task handle when setting stream CX2341x parameters
Sometimes, we might only have VBI or YUV stream open instead of an MPEG stream.
Let's make sure we use a valid task handle to perform the CX2341x control
settings.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9893): cx18: Convert some list manipulations to emphasize entries not lists

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9892): cx18: VBI comment corrections and comments about VBI issues

VBI comment corrections to avoid future confusion about standards.
Comments on cx18 VBI implementation shortcomings that need resolution.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9891): cx18 Replace magic number 63 with CX18_MAX_FW_MDLS_PER_STREAM

Removed magic number that referred to firmware limit on the number of
MDLs the firmware can maintain for any stream at any one time.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9889): CX24113: Fixed more typos

Uwe Bugla pointed out that there are some more typos in some print-statements. Fixed.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9888): Patch: fix a typo in cx24113.c

This patch fixes a typo in cx24113.c.

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9887): Minor fixes for cx24113-driver (codingstyle)

Fixed some minor coding style issues and some driver information
printed when using the driver on a board.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9884): gspca - ov534: Fix a warning when compilation without GSPCA_DEBUG.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9883): gspca - ov534: Show sensor ID.

The original version of sccb_read_reg() is from Jim Paris.

NOTE: as it is now reading sensor ID won't work for sensors on different
i2c slave address.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9882): gspca - ov534: Fix typo.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9880): gspca - vc032x: Add V&H flips and sharpness controls for sensor po1200.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9879): gspca - vc032x: Remove the unused quality/qindex.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9878): gspca - vc032x: Fix frame overflow errors with vc0321.

The vc0321 sends some additional data after sending the complete
frame, we ignore this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9877): gspca - ov534: Add framerate support.

Add support for getting and setting framerate via v4l2 controls,
rather than setting a fixed value at module insertion.

Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9876): gspca - main: Allow subdrivers to handle v4l2_streamparm requests.

Add get_streamparm and set_streamparm operations so subdrivers can
get/set stream parameters such as framerate.

Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9874): gspca - ov534: Explicitly initialize frame format.

Set frame format registers 0x0a and 0x0b to explicit values
rather than relying on reset-time defaults.

Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9873): gspca - ov534: Improve payload handling.

Frame data in bulk transfers is separated into 2048-byte payloads.
Each payload has its own header.

Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9871): gspca - vc032x: Bad detection of sensor mi0360.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9870): gspca - vc032x: Webcam 15b8:6002 and sensor po1200 added.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9869): gspca - zc3xx: Change the USB exchanges for the sensor pas202b.

This sensor was declared as hdcs2020.
The new exchanges have been extracted from the ms-win file usbvm31b.inf.
The light frequency control has been added.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9868): gspca - zc3xx: Remove the duplicated register names

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9867): gspca - vc032x: Remove the autogain control.

This control was not coded.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9866): gspca - vc032x: V and H flips added for sensors ov7660 and 7670.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9865): gspca - vc032x: Bad check of the sensor mi0360.

Error was due to bad variable names.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9864): gspca - ov519: Change copyright information.

Signed-off-by: Romain Beauxis <toots@rastageeks.org>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9863): gspca - sonixj: Cleanup / simplify code.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9861): gspca - ov534: Accept many simultaneous webcams.

This patch moves the last fid and pts from static to the sd structure.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9860): gspca - ov534: Frame transfer improvements.

The indirect registers at 0x1c/0x1d control frame settings.  If we
leave the values at 0x0a and 0x0b at their reset-time defaults, frame
data from the camera matches the UVC payload format.  This lets us
better reassemble the data into frames and know when data was lost.

This also lets us relax the bulk_size requirement from 600K to 2K,
which should help systems on with limited RAM (like the PS3).

Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9859): gspca - ov534: Fix frame size so we don't miss the last pixel.

The frame size is too small, so we lose the last YUYV pixel.
Fix the setup and remove the last_pixel hack.

Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9858): gspca - ov534: Initialization cleanup.

Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9857): gspca: Use smaller chunks for urb buffer in ov534.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9856): gspca: Use u8 values for USB control messages in ov534.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9855): gspca: Simplify frame rate setting and debug in ov534.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9854): gspca: Add the webcam 0c45:60fe in the gspca documentation.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9853): gspca: Webcam 093a:2622 added in pac7311.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9852): gspca: Fix image problem at low resolutions with ov7660 in sonixj.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9850): gspca: Bad color control in sonixj.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9849): gspca: Add the webcam 0c45:613a in the gspca documentation.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9848): gspca: Webcam 06f8:3004 added in sonixj.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9847): gspca: Align the 640x480 and 320x240 init of tas5130 in zc3xx.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9846): gspca: Do the webcam microphone work when present.

This patch adds the set/get/enum audio controls.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9845): gspca: Add sensor mi0360 in vc032x.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9843): gspca: Change the colors and add the red and blue controls in sonixj.

The colors control (saturation) acted as color balance.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9842): gspca: Center the brightness in sonixj.

The brightness jumped from max to min at the middle of the control values.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9841): gspca: Use msleep instead of mdelay.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9840): gspca: Simplify the pkt_scan of stk014.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9838): gspca: Delay when trying an other altsetting on streaming start.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9837): gspca: Simplify the brightness/contrast for ov76xx sensors in sonixj.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9835): ivtv/ivtvfb: convert to v4l2_device/v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9834): wm8775: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9833): wm8739: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9832): vp27smpx: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9831): upd64083: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9830): upd64031a: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9829): tuner: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9828): saa717x: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9827): saa7127: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9826): saa7115: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9825): msp3400: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9824): m52790: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9823): cx25840: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9822): cs53l32a: convert to v4l2_subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9821): v4l2-common: add i2c helper functions

Add helper functions to load i2c sub-devices, integrating them
into the v4l2-framework.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9820): v4l2: add v4l2_device and v4l2_subdev structs to the v4l2 framework.

Start implementing a proper v4l2 framework as discussed during the
Linux Plumbers Conference 2008.

Introduces v4l2_device (for device instances) and v4l2_subdev (representing
sub-device instances).

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Andy Walls <awalls@radix.net>
Reviewed-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9817): v4l: add new tvp514x I2C video decoder driver

Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Signed-off-by: Manjunath Hadli <mrh@ti.com>
Signed-off-by: R Sivaraj <sivaraj@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Karicheri Muralidharan <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9816): v4l2-int-if: add three new ioctls for std handling and routing

These changes are needed for the new TVP514x driver.

Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Hardik Shah <hardik.shah@ti.com>
Signed-off-by: Manjunath Hadli <mrh@ti.com>
Signed-off-by: R Sivaraj <sivaraj@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Karicheri Muralidharan <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9815): omap2: add OMAP2 camera driver.

Add a driver for the OMAP2 camera block. OMAP2 is used in e.g. Nokia
N800/N810 internet tablet.

This driver uses the V4L2 internal ioctl interface.

Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9812): [PATCH] short help for Technisat cards to select the right configuration

This patch adds a short help for Technisat cards to help the user
selecting the right configuration for his card(s).

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9811): Add support for the CX24113 DVB-S tuner driver

This commit adds support for the CX24113 DVB-S tuner driver and thus support for the Technisat Skystar2 revision 2.8.
The driver was created with the help of Technisat. Thank you very much.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9810): uvcvideo: Add a device quirk to prune bogus controls.

Bogus controls currently include processing unit auto controls for which no
corresponding manual control is available. Such auto controls make little
sense if any, and are known to crash at least the SiGma Micro webcam.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9809): uvcvideo: Add nodrop module parameter to turn incomplete frame drop off.

The driver drops incomplete uncompressed video frames to avoid confusing
userspace with corrupt data. Add a nodrop module parameter to turn that
behaviour off and make all frames available to userspace.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9806): cx18: Enable raw VBI capture

A combined authorship patch from Hans Verkuil and Andy Walls.  Raw
VBI can now be captured but requires a video capture to be in progress as well.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9805): cx18: Port fix for raw/sliced VBI mixup from ivtv and cx25840

This is a port of the fixes Hans Verkuil made for ivtv/cx25840:
The service_set field was used to determine whether raw or sliced VBI was
desired. This is incorrect since it is perfectly valid to select sliced VBI
with a service_set of 0.

Instead the driver should check on VIDIOC_S_FMT whether the type
field matches the raw or sliced VBI type.

Updated the cx18 driver accordingly, including an additional check in
cx18_start_v4l2_encode_stream() that didn't exist in ivtv.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9804): cx18: Avoid making firmware API calls with the queue lock held

cx18: Avoid making firmware API calls with the queue lock held.  The source
of MPEG strem corruption when not holding the queue lock was found to be that
the MPEG buffer could be retrieved by the user app before it was sync'ed for
the host cpu.  Incoming buffers are now sync'ed before being put on q_full and
releasing the queue lock.  We can thus avoid the sometimes lengthy call to
the firmware for CPU_DE_SET_MDL while holding the queue lock, so we can get
better performance.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9803): cx18: Increment version number due to siginificant buffering changes

cx18: Increment version number due to siginificant buffering changes.
Now version 1.0.4

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9802): cx18: Add module parameters for finer control over buffer allocations

cx18: Add module parameters for finer control over buffer allocations.
User now has the option of setting smaller buffers to get lower
latency transfers from the encoder.  User can also now set the number
of buffers used for a stream explicitly.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9801): cx18: Allow more than 63 capture buffers in rotation per stream

cx18: Allow more than 63 capture buffers in rotation per stream.  Implement
q_busy to hold buffers the firmware has for use.  q_free holds truly unused
buffers in a pool.  New buffers are given to the firmware as soon as the
firmware returns one, if there are any to give to the firmware.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9800): cx18: Eliminate q_io from stream buffer handling

Eliminate q_io from stream buffer handling in anticipation of upcoming
changes in buffer handling.  q_io was a holdover from ivtv and it's function
in cx18 was trivial and not necessary.  We just push things back onto the
front of q_full now, instead of maintaining a 1 buffer q_io queue.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9799): em28xx: fix Kworld Hybrid 330 (A316) support

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

V4L/DVB (9798): saa7134: add analog and DVB-T support for Medion/Creatix CTX946

How to enable the mpeg encoder is not found yet.
The card comes up with gpio 0x0820000 for DVB-T.

Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>