ALSA: hda - enable SPDIF output for Intel DX58SO board
ALC889 has two SPDIF outputs: 0x06, 0x10. Board vendors can use either or both.
DX58SO uses 0x10, but the driver assumes 0x06. The safe solution is to add
0x10 as slave output to the existing 0x06.
Reported-by: Jeroen Van Breedam <jeroen.vanbreedam@sgr5.be> Tested-by: Jeroen Van Breedam <jeroen.vanbreedam@sgr5.be> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 23 Mar 2009 21:50:52 +0000 (22:50 +0100)]
ALSA: hda - Add quirk for Acer Ferrari 5000
Add a quirk model=acer-aspire for Acer Ferrari 5000 with ALC883 codec.
Note that model=auto doesn't work for this laptop because of broken BIOS
(that doesn't set the subsystem id properly).
Pascal de Bruijn [Mon, 23 Mar 2009 10:15:59 +0000 (11:15 +0100)]
ALSA: hda - Add function id to proc output
This patch does two things:
Output Intel HDA Function Id in /proc/asound/cardX/codec#X
Align Vendor/Subsystem/Revision Ids to 8 characters, front-padded with zeros
Takashi Iwai [Fri, 20 Mar 2009 11:52:47 +0000 (12:52 +0100)]
ALSA: hda - Detect digital-mic inputs on ALC663 / ALC272
Fix the detection of digital-mic inputs on ALC663 / ALC272 codecs
in the auto-detection mode. The automatic mic switch via plugging
isn't implemented yet, though.
Takashi Iwai [Tue, 17 Mar 2009 06:49:14 +0000 (07:49 +0100)]
ALSA: hda - Workaround for buggy DMA position on ATI controllers
The position-buffer on ATI controllers are unreliable as well as
on VIA chips, thus the same workaround for DMA position reading as
VIA is useful for ATI.
Takashi Iwai [Tue, 17 Mar 2009 06:47:18 +0000 (07:47 +0100)]
ALSA: hda - Fix DMA mask for ATI controllers
ATI controllers (at least some SB0600 models) appear buggy to handle
64bit DMA. As a workaround, reset GCAP bit0 and let the driver to
use only 32bit DMA on these controllers.
Takashi Iwai [Mon, 16 Mar 2009 14:25:00 +0000 (15:25 +0100)]
ALSA: hda - Fix ALC662 beep again
The previous commit breaks the (digital-) beep on ALC662.
ALC662 has the connection index 0x05 while ALC662 and ALC272 have the
index 0x04 for the beep widget.
Takashi Iwai [Tue, 10 Mar 2009 14:35:35 +0000 (15:35 +0100)]
ALSA: hda - Clean up Cxt5047 parser
Clean up Conexant 5047 pareser code:
- Split mixer elements to separate arrays to reduce the duplicated
entires
- Fix mixer element names to the standard ones
- Remove unneeded cxt5047_hp2_unsol_event; the normal unsol_event
handler works fine.
Takashi Iwai [Tue, 10 Mar 2009 13:41:05 +0000 (14:41 +0100)]
ALSA: hda - Create "Capture Source" control dynamically in patch_conexant.c
Create "Capture Source" control dynamically for Conexant codecs.
If only one capture item is available, don't create such a control
since it's just useless.
ALSA: hda - Added HP HDX16/HDX18 notebook support for HDA codecs (82HD71)
Added codec recognition of HP HDX platforms and added support of the
MUTE LED (orange/white). For this feature the CONFIG_SND_HDA_POWER_SAVE
is needed to use event handling for mute control.
Signed-off-by: Christoph Plattner <christoph.plattner@gmx.at> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 6 Mar 2009 11:00:24 +0000 (12:00 +0100)]
ALSA: hda - Connect to primary DAC if no individual DAC is available
In stac92xx_auto_fill_dac_nids[], connect to the primary DAC if no
individual DAC is available for each pin. This ensures that the pin
works somehow at least.
Takashi Iwai [Fri, 6 Mar 2009 08:43:58 +0000 (09:43 +0100)]
ALSA: hda - Fix headphone-detect regression with multiple HP jacks
The recent changes over the DAC detection mechanism in patch_sigmatel.c
breaks the HP detection on the machines with multiple HP jacks.
It's basically because of the workaround to support the multi-channel
output. Since the HP detection is more important feature, disable
the HP-swap workaroud temporarily.
Takashi Iwai [Thu, 5 Mar 2009 13:18:16 +0000 (14:18 +0100)]
ALSA: Fix sample rate of Lenovo Ideapad to 44.1kHz
Noises can be heard on analog outputs of (some model of) Lenovo
Ideapad due to the hardware problem, and the only workaround right now
is to fix the sample rate to 44.1kHz.
Takashi Iwai [Wed, 4 Mar 2009 10:30:25 +0000 (11:30 +0100)]
ALSA: hda - Fix conflict of mixer controls on Sony VAIO VGN-AR71S
The recent update enabled the model=sony-assamd for all ALC262 with
PCI SSID 104d:90xx. But this includes the VAIO VGN-AR* that has the
primary codec of STAC92xx and the secondary ALC262 as a slave
digital-only codec. For this device, the model=auto must be chosen
to work properly.
Takashi Iwai [Wed, 4 Mar 2009 08:03:50 +0000 (09:03 +0100)]
ALSA: hda - Fix HP dv6736 mic input
Fix the mic input of HP dv6736 with Conexant 5051 codec chip.
This laptop seems have no mic-switching per jack connection.
A new model hp-dv6736 is introduced to match with the h/w implementation.
Takashi Iwai [Tue, 3 Mar 2009 14:00:35 +0000 (15:00 +0100)]
ALSA: hda - Fix gcc compile warning
It's false positive, but annoying.
sound/pci/hda/hda_codec.c: In function ‘get_empty_pcm_device’:
sound/pci/hda/hda_codec.c:2772: warning: ‘dev’ may be used uninitialized in this function
Don't create "Analog Loopback" controls as default since these controls
are usually more harmful than useful for normal users.
Only created when "loopback = yes" hint is given.
Takashi Iwai [Mon, 2 Mar 2009 09:46:03 +0000 (10:46 +0100)]
ALSA: hda - Don't return a fatal error at PCM-creation errors
Don't return a fatal error to the driver but continue to probe when
any error occurs at creating PCM streams for each codec.
It's often non-fatal and keeping it would help debugging.
Takashi Iwai [Mon, 2 Mar 2009 09:44:15 +0000 (10:44 +0100)]
ALSA: hda - Revert the codec probe at control-creation errors
Revert the codec probe instead of returning the error to the driver
when any error occurs at creating the control elements.
The control element conflict can be non-fatal in many cases,
especially if it comes from the digital-only codec.
Takashi Iwai [Mon, 2 Mar 2009 07:06:11 +0000 (08:06 +0100)]
ALSA: hda - Remove Toshiba probe_mask quirk
Revert the Toshiba probe_mask quirk for 2.6.29 kernel
(commit 38f1df27e3191d76e983cb9c6b4392582fd32fda).
In the current tree, the digital-only codec is handled properly so
no codec conflict should occur.
Takashi Iwai [Mon, 2 Mar 2009 07:04:35 +0000 (08:04 +0100)]
ALSA: hda - Don't create a beep control for digital-only ALC268
When an ALC268 codec is set up as the digital-only (as found in Toshiba
laptops), it shouldn't contain any beep control that conflict with the
primary codec.
Takashi Iwai [Sun, 1 Mar 2009 09:55:44 +0000 (10:55 +0100)]
ALSA: hda - Add probe_mask default for Toshiba laptop with ALC268
Some Toshiba laptops have another ALC268 codec on slot#3 that conflicts
with the primary codec. The codec#3 is for the digital I/O, and should
be fixed by the driver, but it'd need a bunch of changes.
So, let's fix the probe problem temporarily by setting the default
probe_mask value.
Takashi Iwai [Fri, 27 Feb 2009 16:52:22 +0000 (17:52 +0100)]
ALSA: hda - Fix an "unused variable" compile warning
Forgot to remove an unused variable.
sound/pci/hda/patch_realtek.c: In function ‘alc882_auto_init_analog_input’:
sound/pci/hda/patch_realtek.c:7018: warning: unused variable ‘vref’
Takashi Iwai [Thu, 26 Feb 2009 15:50:43 +0000 (16:50 +0100)]
ALSA: hda - Add model=auto for STAC/IDT codecs
Added the model=auto to STAC/IDT codecs to use the BIOS default setup
explicitly. It can be used to disable the device-specific model quirk
in the driver.
Hannes Eder [Wed, 25 Feb 2009 21:28:45 +0000 (22:28 +0100)]
ALSA: sound/pci/hda: fix sparse warning: different signedness
Fix this sparse warning:
sound/pci/hda/hda_codec.c:1544:19: warning: incorrect type in assignment (different signedness)
sound/pci/hda/hda_codec.c:1544:19: expected unsigned long *vals
sound/pci/hda/hda_codec.c:1544:19: got long *<noident>
Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>