Mark Brown [Wed, 8 Oct 2008 12:02:20 +0000 (13:02 +0100)]
ALSA: ASoC: Check for machine type in GTA01 machine driver
Since there are now multiple OpenMoko platforms it is more important to
check that the machine driver is running on the correct system. This
was orgininally generated as part of the initial GTA02 machine port.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk
The MIDI interfaces have to be detected dynamically for Edirol devices
ua-700, ua-25 and ua4-fx. This patch reverses the wrong changes made by
my other patch in uaxx-quirk.
Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Takashi Iwai [Tue, 7 Oct 2008 14:13:59 +0000 (16:13 +0200)]
ALSA: Add a note on dependency of RTC stuff
Added a note on the dependency of old RTC stuff, which is exclusive
with the new RTC class drivers.
http://bugme.linux-foundation.org/show_bug.cgi?id=11430
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Richard Zhao [Tue, 7 Oct 2008 00:05:20 +0000 (08:05 +0800)]
ALSA: ASoC: add new param mux to dapm_mux_update_power
Function dapm_mux_update_power needs enum index mux and register mask value val
as parameters, but it only has a parameter val, and uses it as both val and mux.
snd_soc_test_bits(widget->codec, e->reg, mask, val) val is register mask here,
e->texts[val] but val should be enum index mux here.
This patch adds a new param mux to fix it.
Signed-off-by: Richard Zhao <linuxzsc@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Takashi Iwai [Tue, 7 Oct 2008 09:38:09 +0000 (11:38 +0200)]
ALSA: Increase components array size
Increase the card components[] (and thus snd_card_info.components[],
too) array size from 80 to 128 chars so that more strings can be
stored. The 80 chars aren't enough for more than 2 HD-audio codecs,
and this hits an ugly snd_BUG() as reported by Wu Fegguang for HP
2230s.
The control protocol number is increased to 2.0.6 as well, in case
it matters.
Reported-by: Wu Fengguang <wfg@linux.intel.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Mark Brown [Mon, 6 Oct 2008 10:33:21 +0000 (11:33 +0100)]
ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver
Mic PGA Switch should be inverted in the WM8510 driver but isn't.
Reported-by: ext-jukka.hynninen@vaisala.com Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ALSA: snd-usb-audio: support for Edirol UA-4FX device
Renamed the old quirk function for ua-700/ua-25 to become more
generic, moving the MIDI interfaces to the quirk data header.
Added a new quirk for the Edirol UA-4FX.
Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Takashi Iwai [Thu, 2 Oct 2008 12:50:22 +0000 (14:50 +0200)]
ALSA: usb - Fix possible Oops at USB-MIDI disconnection
The endpoints should be released immediately at disconnection
rather than the delayed release. This could be a reason of Oops
at USB-audio device disconnection being used.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ALSA: hda: add more board-specific information for Realtek ALC662 rev1
I recently got a chance to play with two boards with ALC662 rev1:
* BIOSTAR TA780G M2+
* ASROCK K10N78FullHD-hSLI R3.0
Both use 3 stack, 6ch mode with digital out. Since autodetection isn't able
to figure that out from BIOS, we need to specify that manually.
ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards
This patch adds PCI IDs for:
* TerraTec DMX XFire 1024
* Hercules Gamesurround Fortissimo II
* Hercules Gamesurround Fortissimo III 7.1
All those cards were supported as generic CS46xx device,
so they will work as before. I'm pretty sure that first two
cards work, as they have same hardware design as reference
card. Not sure about Fortissimo III, but this won't break it
if it worked.
The test (ssc != NULL) can only be reached if the call to the function
ssc_request, the result of which ssc is assigned, succeeds. Moreover,
two statements assign NULL to ssc just before a return, which is useless
since it is a local variable. So, we suggest to delete the test and
the two assignments.
A simplified version of the semantic match that finds this problem is
as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@bad_null_test@
expression x,E;
@@
x = ssc_request(...)
... when != x = E
* x != NULL
// </smpl>
Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Wei Ni [Fri, 26 Sep 2008 05:55:56 +0000 (13:55 +0800)]
ALSA: Fix for reading RIRB buffer on NVIDIA aza controller with AMD Phenom cpu
When read RIRB buffer immediately after RIRB interrupt received,
sometimes the data will be "0x0". If we wait for some time, the data
in buffer will be correct. This issue only occurred with AMD Phenom cpu.
So we set this "needs_damn_long_delay" flag.
Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ALSA: hda - Fix / clean-up slave digital out codes
The recent slave_dig_out addition has some rooms to clean up.
Also it doesn't call snd_hda_cleanup_stream() properly for slaves
at closing. The patch fixes both issues.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Matthew Ranostay [Thu, 25 Sep 2008 13:17:11 +0000 (09:17 -0400)]
ALSA: hda: slave_dig_outs code block in wrong location
Removed invalid references to slave_dig_outs inside the S/PDIF IN capture switch
control. Beforehand this was basically a mute switch for the S/PDIF outs as well.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
We have some arithmetic operations against snd_pcm_hw_param_t, thus
bitwise isn't correct for it. Better to remove the flag to shut up
sparse warnings.
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Matthew Ranostay [Wed, 24 Sep 2008 01:46:30 +0000 (21:46 -0400)]
ALSA: hda: use last DAC defined for hp_pin
Patch allows the last DAC in the dac_nids for the hp_nid if there is an
available one this isn't in use by a line_out entry or if hp_nid isn't already
defined. This solves the issues with the 'Headphone Playback' mixer
controls on the 92hd73xxx branch and possibly others.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Clemens Ladisch [Wed, 24 Sep 2008 13:25:28 +0000 (15:25 +0200)]
ALSA: oxygen: wait for ACK when resetting UART
After sending a reset command to the UART, wait some time for the ACK to
be generated (and to be read and dropped by the interrupt handler)
before sending the next command.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Jean Delvare [Mon, 22 Sep 2008 12:15:53 +0000 (14:15 +0200)]
ALSA: ASoC: Convert tlv320aic3x to a new-style i2c driver (v2)
Convert the tlv320aic3x codec driver to the new (standard) device
driver binding model.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Vladimir Barinov <vbarinov@ru.mvista.com> Tested-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ALSA: hda - Fix ALC662 DAC mixer mutes also for auto config model
In previous change "[ALSA] hda-codec - Fix ALC662 DAC mixer mutes", I
missed to fix the mixer mute switches also for the auto config model of
ALC662. Now mute for mixer items "Front", "Surround", "Center" and "LFE"
when available will work too with "auto" model.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Matthew Ranostay [Tue, 16 Sep 2008 14:39:37 +0000 (10:39 -0400)]
ALSA: hda: SPDIF mux fixes for STAC927x
Corrected bounds-checking in stac92xx_auto_create_mux_input_ctls() and added a spec->spdif_labels
pointer for custom SPDIF mux labels for non-standard codec connections.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Mark Brown [Tue, 16 Sep 2008 11:51:26 +0000 (12:51 +0100)]
sound: ASoC: Add WM8750 SPI support
Implement SPI support for WM8750, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.
Also fix a cut'n'pasted comment in the I2C side of the driver (which was
clearly written in the same way) while we're at it.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Mark Brown [Mon, 15 Sep 2008 14:51:13 +0000 (15:51 +0100)]
sound: ASoC: DAPM support for ADC on WM9713 PCM interface
The stereo ADC in the WM9713 can be used to produce data for both the
standard AC97 interface and the additional voice PCM interface. Support
use on both by defining virtual ADCs tied to each accepting the output
from the actual ADCs.
Reported-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Harald Welte [Mon, 15 Sep 2008 14:43:23 +0000 (22:43 +0800)]
ALSA: HDA VIA: Replace buggy Mic Boost
VT1708S' Mic Boost should be hidden in hardware design according to some
customers' requirements. However, in case of bugs, it has to be exhibited to
normal users, so we need to:
* open a software backdoor, which is disabled by default in hardware
* re-write .tlv & .info, to indicate the actual necessary info, which we cannot
get from amplifier's capabiliies
Signed-off-by: Logan Li <LoganLi@viatech.com.cn> Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Harald Welte [Mon, 15 Sep 2008 14:42:26 +0000 (22:42 +0800)]
ALSA: HDA VIA: Fix 2nd S/PDIF out function
As it seems, the recently-sent patch for the 2nd S/PDIF (HDMI) output
is not working with alsa-kernel 1.0.18rc3.
This patch makes it work by
* activating the second S/PDIF output pin in the pin config
* consolidating the dig_playback_pcm_prepare() with extra_dig_pcm_prepare()
functions
* remove the need for an extra hda_pcm_stream structure and rather represents
the second digital output as substream within the primary S/PDIF digital out
stream.
Signed-off-by: Logan Li <LoganLi@viatech.com.cn> Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Harald Welte [Mon, 15 Sep 2008 14:41:31 +0000 (22:41 +0800)]
ALSA: HDA VIA: Fix crash on codecs without Headphone
Don't enumerate via_hp_mixer while hp_mux is null (headphone does not exist),
to fix the crash of via_independent_hp_info (via_hp_mixer's .info), which will
reference hp_mux.
Signed-off-by: Logan Li <LoganLi@viatech.com.cn> Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ASoC and non-ASoC drivers for PCM DMA on PXA share lots of common code.
Move it to pxa2xx-lib.
[Fixed some checkpatch warnings -- broonie]
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ALSA: pxa2xx-ac97-lib: support building for several CPUs
Support building of pxa2xx-ac97-lib for several CPUs by making code
run-time selected, not only compile-time.
[Fixed 3XX->3xx typos in ifdef checks -- broonie.]
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ASoC and non-ASoC drivers for ACLINK on PXA share lot's of common code.
Move all common code into separate module snd-pxa2xx-lib.
[Fixed handing of SND_AC97_CODEC in Kconfig and some checkpatch warnings
-- broonie]
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
sound: ASoC: Support runtime selection of CPU in pxa2xx-i2s
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The WM8971 is a low power, high quality stereo codec designed for
portable digital audio applications.
This driver was originally written by Kenneth Kiraly. While out of tree
it has had updates to reflect current kernel APIs and coding standards
from Graeme Gregory and Mark Brown.
Signed-off-by: Kenneth Kiraly <kiraly@lab126.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Robin H. Johnson [Sat, 13 Sep 2008 23:54:57 +0000 (16:54 -0700)]
ALSA: HDA: hda_proc: Fix printf format specifier
The Pincap output had a typod format specifier, leading to an extraneous "08"
in the output, which is a reserved bit of the Vref field, and was really
confused :-).
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Matthew Ranostay [Sat, 13 Sep 2008 20:45:39 +0000 (16:45 -0400)]
ALSA: hda: 92hd73xx fixes
Added support for defining the number of amps and the creation
of the private_dimux dynamically for the 92hd73xx codec family.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
[Fixed a typo by tiwai] Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Don't use __init but __devinit to define probe function. A pointer to
snd_aica_probe is passed to the core via platform_driver_register and so the
function must not disappear after the module is loaded. Using __init
and having HOTPLUG=y and SND_AICA=m the following probably oopses:
ALSA: hda: fix oopses in snd-hda-intel after digital slave support additions
Many places fail to check if codec has slave_dig_outs entries (the most common
case is not having any entry), leading to various possible oopses in hda_codec
code.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Alan Horstmann [Tue, 9 Sep 2008 18:25:49 +0000 (19:25 +0100)]
sound: ASoC: Fix WM8731 SPI write
Ensure wm8731_spi_write byte order is consistent regardless of
endianess.
Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Clemens Ladisch [Mon, 22 Sep 2008 07:03:42 +0000 (09:03 +0200)]
ALSA: oxygen: configure MIDI via device_config
To enable the MIDI port, model drivers must now set flags in
device_config, not only in misc_flags. This allows model drivers to
enable the UART without creating an ALSA MIDI device.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Clemens Ladisch [Mon, 22 Sep 2008 07:00:30 +0000 (09:00 +0200)]
ALSA: virtuoso: handle D2X/DX dynamically
The Xonar D2X and DX are very similar to the D2 and D1, respectively, so
we can handle the differences dynamically instead of using a separate
model structure for each one.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Harald Welte [Tue, 9 Sep 2008 07:58:27 +0000 (15:58 +0800)]
ALSA: HDA patch_via.c: Independent DAC for headphone
This mode allows an output stream to have two substreams, one for the
speakers and one for the headphone. Each of the substreams has independent
PCM data and uses a different DAC.
Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ALSA: fix section for sa11xx-uda1341 platform driver
Don't use __init but __devinit to define probe function. A pointer to
sa11xx_uda1341_probe is passed to the core via platform_driver_register
and so the function must not disappear after the module is loaded. Using
__init and having HOTPLUG=y and SND_SA11XX_UDA1341=m the following
probably oopses:
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Brian Avery <b.avery@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added support for playing a stream on multiple digital outs. This is done
by defining codec->slave_dig_outs as array of hda_nid_t with a null-terminated entry to set the
slave SPDIF outs, in which the slave outs have cloned settings of the master out (e.g. dig_out_nid).
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ALSA: ice1712/ice1724: Coding style fixes part 1 (more coming up)
Inspired by Alexander Beregalov's patches for wtm and aureon.c,
I decided to run checkpatch on some more files. After some work
checkpatch.pl-0.23 --no-tree --file --strict <file> reports
0 errors, 0 warnings, 0 checks, n lines checked for:
phase.c
phase.h
juli.c (1 check about unused code, maybe we should comment it)
juli.h (no changes necessary)
In other files I have just fixed // comments and long lines along the
way (but not all of them), more coming up.
projects / linux-2.6-omap-h63xx.git / log