]> pilppa.com Git - linux-2.6-omap-h63xx.git/log
linux-2.6-omap-h63xx.git
17 years agox86: optimise barriers
Nick Piggin [Sat, 13 Oct 2007 01:07:38 +0000 (03:07 +0200)]
x86: optimise barriers

According to latest memory ordering specification documents from Intel
and AMD, both manufacturers are committed to in-order loads from
cacheable memory for the x86 architecture.  Hence, smp_rmb() may be a
simple barrier.

Also according to those documents, and according to existing practice in
Linux (eg.  spin_unlock doesn't enforce ordering), stores to cacheable
memory are visible in program order too.  Special string stores are safe
-- their constituent stores may be out of order, but they must complete
in order WRT surrounding stores.  Nontemporal stores to WB memory can go
out of order, and so they should be fenced explicitly to make them
appear in-order WRT other stores.  Hence, smp_wmb() may be a simple
barrier.

    http://developer.intel.com/products/processor/manuals/318147.pdf
    http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/24593.pdf

In userspace microbenchmarks on a core2 system, fence instructions range
anywhere from around 15 cycles to 50, which may not be totally
insignificant in performance critical paths (code size will go down
too).

However the primary motivation for this is to have the canonical barrier
implementation for x86 architecture.

smp_rmb on buggy pentium pros remains a locked op, which is apparently
required.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agox86: fix IO write barrier
Nick Piggin [Sat, 13 Oct 2007 01:06:55 +0000 (03:06 +0200)]
x86: fix IO write barrier

wmb() on x86 must always include a barrier, because stores can go out of
order in many cases when dealing with devices (eg. WC memory).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agox86: fence oostores on 64-bit
Nick Piggin [Sat, 13 Oct 2007 01:06:00 +0000 (03:06 +0200)]
x86: fence oostores on 64-bit

movnt* instructions are not strongly ordered with respect to other stores,
so if we are to assume stores are strongly ordered in the rest of the 64
bit code, we must fence these off (see similar examples in 32 bit code).

[ The AMD memory ordering document seems to say that nontemporal stores can
  also pass earlier regular stores, so maybe we need sfences _before_
  movnt* everywhere too? ]

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoOnly enable BLOCK_COMPAT if COMPAT is needed
Linus Torvalds [Sat, 13 Oct 2007 00:58:36 +0000 (17:58 -0700)]
Only enable BLOCK_COMPAT if COMPAT is needed

IOW, it needs to depend on both CONFIG_BLOCK and CONFIG_COMPAT.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoMerge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Fri, 12 Oct 2007 23:16:41 +0000 (16:16 -0700)]
Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (119 commits)
  [libata] struct pci_dev related cleanups
  libata: use ata_exec_internal() for PMP register access
  libata: implement ATA_PFLAG_RESETTING
  libata: add @timeout to ata_exec_internal[_sg]()
  ahci: fix notification handling
  ahci: clean up PORT_IRQ_BAD_PMP enabling
  ahci: kill leftover from enabling NCQ over PMP
  libata: wrap schedule_timeout_uninterruptible() in loop
  libata: skip suppress reporting if ATA_EHI_QUIET
  libata: clear ehi description after initial host report
  pata_jmicron: match vendor and class code only
  libata: add ST9160821AS / 3.ALD to NCQ blacklist
  pata_acpi: ACPI driver support
  libata-core: Expose gtm methods for driver use
  libata: add HDT722516DLA380 to NCQ blacklist
  libata: blacklist NCQ on Seagate Barracuda ST380817AS
  [libata] Turn on ACPI by default
  libata_scsi: Fix ATAPI transfer lengths
  libata: correct handling of SRST reset sequences
  libata: Integrate ACPI-based PATA/SATA hotplug - version 5
  ...

17 years agoUpdate maintainers file
Andi Kleen [Fri, 12 Oct 2007 23:01:08 +0000 (01:01 +0200)]
Update maintainers file

Since there is no x86-64 architecture anymore it cannot be maintained.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
Linus Torvalds [Fri, 12 Oct 2007 22:50:23 +0000 (15:50 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (37 commits)
  PCI: merge almost all of pci_32.h and pci_64.h together
  PCI: X86: Introduce and enable PCI domain support
  PCI: Add 'nodomains' boot option, and pci_domains_supported global
  PCI: modify PCI bridge control ISA flag for clarity
  PCI: use _CRS for PCI resource allocation
  PCI: avoid P2P prefetch window for expansion ROMs
  PCI: skip ISA ioresource alignment on some systems
  PCI: remove transparent bridge sizing
  pci: write file size to inode on proc bus file write
  pci: use size stored in proc_dir_entry for proc bus files
  pci: implement "pci=noaer"
  PCI: fix IDE legacy mode resources
  MSI: Use correct data offset for 32-bit MSI in read_msi_msg()
  PCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code
  PCI: i386: Compaq EVO N800c needs PCI bus renumbering
  PCI: Remove no longer correct documentation regarding MSI vector assignment
  PCI: re-enable onboard sound on "MSI K8T Neo2-FIR"
  PCI: quirk_vt82c586_acpi: Omit reading PCI revision ID
  PCI: quirk amd_8131_mmrbc: Omit reading pci revision ID
  cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read
  ...

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
Linus Torvalds [Fri, 12 Oct 2007 22:49:37 +0000 (15:49 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits)
  PM: merge device power-management source files
  sysfs: add copyrights
  kobject: update the copyrights
  kset: add some kerneldoc to help describe what these strange things are
  Driver core: rename ktype_edd and ktype_efivar
  Driver core: rename ktype_driver
  Driver core: rename ktype_device
  Driver core: rename ktype_class
  driver core: remove subsystem_init()
  sysfs: move sysfs file poll implementation to sysfs_open_dirent
  sysfs: implement sysfs_open_dirent
  sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir
  sysfs: make sysfs_root a regular directory dirent
  sysfs: open code sysfs_attach_dentry()
  sysfs: make s_elem an anonymous union
  sysfs: make bin attr open get active reference of parent too
  sysfs: kill unnecessary NULL pointer check in sysfs_release()
  sysfs: kill unnecessary sysfs_get() in open paths
  sysfs: reposition sysfs_dirent->s_mode.
  sysfs: kill sysfs_update_file()
  ...

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Fri, 12 Oct 2007 22:49:10 +0000 (15:49 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (142 commits)
  USB: fix race in autosuspend reschedule
  atmel_usba_udc: Keep track of the device status
  USB: Nikon D40X unusual_devs entry
  USB: serial core should respect driver requirements
  USB: documentation for USB power management
  USB: skip autosuspended devices during system resume
  USB: mutual exclusion for EHCI init and port resets
  USB: allow usbstorage to have LUNS greater than 2Tb
  USB: Adding support for SHARP WS011SH to ipaq.c
  USB: add atmel_usba_udc driver
  USB: ohci SSB bus glue
  USB: ehci build fixes on au1xxx, ppc-soc
  USB: add runtime frame_no quirk for big-endian OHCI
  USB: funsoft: Fix termios
  USB: visor: termios bits
  USB: unusual_devs entry for Nikon DSC D2Xs
  USB: re-remove <linux/usb_sl811.h>
  USB: move <linux/usb_gadget.h> to <linux/usb/gadget.h>
  USB: Export URB statistics for powertop
  USB: serial gadget: Disable endpoints on unload
  ...

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Fri, 12 Oct 2007 22:42:01 +0000 (15:42 -0700)]
Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Don't take semaphore in cpufreq_quick_get()
  [CPUFREQ] Support different families in fid/did to frequency conversion
  [CPUFREQ] cpufreq_stats: misc cpuinit section annotations
  [CPUFREQ] implement !CONFIG_CPU_FREQ stub for  cpufreq_unregister_notifier()
  [CPUFREQ] mark hotplug notifier callback as __cpuinit
  [CPUFREQ] Only check for transition latency on problematic governors (kconfig fix)
  [CPUFREQ] allow ondemand and conservative cpufreq governors to be used as default
  [CPUFREQ] move policy's governor initialisation out of low-level drivers into cpufreq core
  [CPUFREQ] Longhaul - Add support for PM133 northbridge
  [CPUFREQ] x86: use num_online_nodes to get physical cpus numbers for

17 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86
Linus Torvalds [Fri, 12 Oct 2007 22:39:39 +0000 (15:39 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86

* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86: (40 commits)
  x86: HPET add another ICH7 PCI id
  x86: HPET force enable ICH5 suspend/resume fix
  x86: HPET force enable for ICH5
  x86: HPET try to activate force detected hpet
  x86: HPET force enable o ICH7 and later
  x86: HPET restructure hpet code for hpet force enable
  clock events: allow replacement of broadcast timer
  i386/x8664: cleanup the shared hpet code
  i386: Remove the useless #ifdef in i8253.h
  ACPI: remove the now unused ifdef code
  jiffies: remove unused macros
  x86_64: cleanup apic.c after clock events switch
  x86_64: remove now unused code
  x86: unify timex.h variants
  x86: kill 8253pit.h
  x86: disable apic timer for AMD C1E enabled CPUs
  x86: Fix irq0 / local apic timer accounting
  x86_64: convert to clock events
  x86_64: Add (not yet used) clock event functions
  x86_64: prepare idle loop for dynamic ticks
  ...

17 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Fri, 12 Oct 2007 22:04:00 +0000 (15:04 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (23 commits)
  ocfs2: Optionally return filldir errors
  ocfs2: Write support for directories with inline data
  ocfs2: Read support for directories with inline data
  ocfs2: Write support for inline data
  ocfs2: Read support for inline data
  ocfs2: Structure updates for inline data
  ocfs2: Cleanup dirent size check
  ocfs2: Rename cleanups
  ocfs2: Provide convenience function for ino lookup
  ocfs2: Implement ocfs2_empty_dir() as a caller of ocfs2_dir_foreach()
  ocfs2: Remove open coded readdir()
  ocfs2: Pass raw u64 to filldir
  ocfs2: Abstract out core dir listing functionality
  ocfs2: Move directory manipulation code into dir.c
  ocfs2: Small refactor of truncate zeroing code
  ocfs2: move nonsparse hole-filling into ocfs2_write_begin()
  ocfs2: Sync ocfs2_fs.h with ocfs2-tools
  [PATCH] fs/ocfs2/: removed unneeded initial value and function's return value
  ocfs2: Implement show_options()
  ocfs2: Clear slot map when umounting a local volume
  ...

17 years agoMerge branch 'isdn-cleanups' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Fri, 12 Oct 2007 22:03:35 +0000 (15:03 -0700)]
Merge branch 'isdn-cleanups' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6

* 'isdn-cleanups' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  [ISDN] HiSax diva: split setup into three smaller functions
  [ISDN] HiSax sedlbauer: move ISAPNP and PCI code into functions of their own
  [ISDN] HiSax elsa: split huge setup function into four smaller functions
  [ISDN] HiSax avm_pci: split setup into three smaller functions
  [ISDN] Remove CONFIG_PCI ifdefs from 100% PCI source code

17 years agoPCI: merge almost all of pci_32.h and pci_64.h together
Greg Kroah-Hartman [Fri, 12 Oct 2007 21:07:23 +0000 (14:07 -0700)]
PCI: merge almost all of pci_32.h and pci_64.h together

It was just duplicated code...

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: X86: Introduce and enable PCI domain support
Jeff Garzik [Thu, 11 Oct 2007 20:58:30 +0000 (16:58 -0400)]
PCI: X86: Introduce and enable PCI domain support

* fix bug in pci_read() and pci_write() which prevented PCI domain
  support from working (hardcoded domain 0).

* unconditionally enable CONFIG_PCI_DOMAINS

* implement pci_domain_nr() and pci_proc_domain(), as required of
  all arches when CONFIG_PCI_DOMAINS is enabled.

* store domain in struct pci_sysdata, as assigned by ACPI

* support "pci=nodomains"

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Add 'nodomains' boot option, and pci_domains_supported global
Jeff Garzik [Thu, 11 Oct 2007 20:57:27 +0000 (16:57 -0400)]
PCI: Add 'nodomains' boot option, and pci_domains_supported global

* Introduce pci_domains_supported global, hardcoded to zero if
  !CONFIG_PCI_DOMAINS.

* Introduce 'nodomains' boot option, which clears pci_domains_supported
  on platforms that enable it by default (x86, x86-64, and others when
  they are converted to use this).

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: modify PCI bridge control ISA flag for clarity
Gary Hade [Mon, 8 Oct 2007 23:24:16 +0000 (16:24 -0700)]
PCI: modify PCI bridge control ISA flag for clarity

Modify PCI Bridge Control ISA flag for clarity

This patch changes PCI_BRIDGE_CTL_NO_ISA to PCI_BRIDGE_CTL_ISA
and modifies it's clarifying comment and locations where used.
The change reduces the chance of future confusion since it makes
the set/unset meaning of the bit the same in both the bridge
control register and bridge_ctl field of the pci_bus struct.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Acked-by: Linas Vepstas <linas@austin.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: use _CRS for PCI resource allocation
Gary Hade [Wed, 3 Oct 2007 22:56:51 +0000 (15:56 -0700)]
PCI: use _CRS for PCI resource allocation

Use _CRS for PCI resource allocation

This patch resolves an issue where incorrect PCI memory and i/o ranges
are being assigned to hotplugged PCI devices on some IBM systems.  The
resource mis-allocation not only makes the PCI device unuseable but
often makes the entire system unuseable due to resulting machine checks.

The hotplug capable PCI slots on the affected systems are not located
under a standard P2P bridge but are instead located under PCI root
bridges or subtractive decode P2P bridges.  For example, the IBM x3850
contains 2 hotplug capable PCI-X slots and 4 hotplug capable PCIe slots
with the PCI-X slots each located under a PCI root bridge and the PCIe
slots each located under a subtractive decode P2P bridge.

The current i386/x86_64 PCI resource allocation code does not use _CRS
returned resource information.  No other resource information source is
available for slots that are not below a standard P2P bridge so
incorrect ranges are being allocated from e820 hole causing the bad
result.

This patch causes the kernel to use _CRS returned resource info.  It is
roughly based on a change provided by Matthew Wilcox for the ia64 kernel
in 2005.  Due to possible buggy BIOS factor and possible yet to be
discovered kernel issues the function is disabled by default and can be
enabled with pci=use_crs.

Signed-off-by: Gary Hade <gary.hade@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: avoid P2P prefetch window for expansion ROMs
Gary Hade [Wed, 3 Oct 2007 22:56:30 +0000 (15:56 -0700)]
PCI: avoid P2P prefetch window for expansion ROMs

Avoid creating P2P prefetch window for expansion ROMs

Because of the future possibility that P2P prefetch windows will contain
address ranges above 4GB some BIOSes are providing space in the P2P
non-prefetch windows for expansion ROMs.  This is due to expansion ROM
BAR 32-bit limitation.  When expansion ROM BARs without BIOS assigned
address(es) are currently found behind a P2P bridge, the kernel attempts
to create a P2P prefetch window for them even though space for them has
already been provided in the non-prefetch window.  _CRS on some systems
with certain resource conservation conscious BIOSes may not provide the
extra 1MB or more memory resource needed for the expansion ROM motivated
prefetch window causing resource allocation errors.

This change corrects the problem by removing IORESOURCE_PREFETCH from
the expansion ROM flags initialization.  It also removes
IORESOURCE_CACHEABLE which seems inappropriate if only non-cacheable
memory is available.

Signed-off-by: Gary Hade <gary.hade@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: skip ISA ioresource alignment on some systems
Gary Hade [Wed, 3 Oct 2007 22:56:14 +0000 (15:56 -0700)]
PCI: skip ISA ioresource alignment on some systems

Skip ISA ioresource alignment on some systems

To conserve limited PCI i/o resource on some IBM multi-node systems, the
BIOS allocates (via _CRS) and expects the kernel to use addresses in
ranges currently excluded by pcibios_align_resource() [i386/pci/i386.c].
This change allows the kernel to use the currently excluded address
ranges on the IBM x3800, x3850, and x3950.

Signed-off-by: Gary Hade <gary.hade@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: remove transparent bridge sizing
Gary Hade [Wed, 3 Oct 2007 22:55:51 +0000 (15:55 -0700)]
PCI: remove transparent bridge sizing

Remove transparent bridge sizing.

Due to code in pci_read_bridge_bases() [drivers/pci/probe.c] the child
bus of a transparent bridge already has access to the parent bus
resources so transparent bridge sizing appears unnecessary.  The bridge
sizing includes alignment and granularity adjustments that can cause
significantly more memory to be reserved from the parant bus than
required by devices on the child bus and allotted by _CRS.

Signed-off-by: Gary Hade <gary.hade@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopci: write file size to inode on proc bus file write
David Rientjes [Thu, 27 Sep 2007 20:41:17 +0000 (13:41 -0700)]
pci: write file size to inode on proc bus file write

When a /proc/bus/pci file is written to, the size of that PCI device's
configuration space must be written to the inode.  Otherwise, it is
possible for the file to specify a size of 0 on stat if a task is holding
the same file open.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopci: use size stored in proc_dir_entry for proc bus files
David Rientjes [Thu, 27 Sep 2007 20:41:16 +0000 (13:41 -0700)]
pci: use size stored in proc_dir_entry for proc bus files

On pci_proc_attach_device(), the size of the PCI configuration space is
stored in the proc_dir_entry as the size of the file.  Thus, the procfs
interface to PCI devices should use it instead of the device directly.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopci: implement "pci=noaer"
Randy Dunlap [Fri, 5 Oct 2007 20:17:58 +0000 (13:17 -0700)]
pci: implement "pci=noaer"

For cases in which CONFIG_PCIEAER=y (such as distro kernels), allow users
to disable PCIE Advanced Error Reporting by using "pci=noaer" on the
kernel command line.

This can be used to work around hardware or (kernel) software problems.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: fix IDE legacy mode resources
Yoichi Yuasa [Tue, 2 Oct 2007 21:19:23 +0000 (14:19 -0700)]
PCI: fix IDE legacy mode resources

I got the following error on MIPS Cobalt.

PCI: Unable to reserve I/O region #1:8@f00001f0 for device 0000:00:09.1
pata_via 0000:00:09.1: failed to request/iomap BARs for port 0 (errno=-16)
PCI: Unable to reserve I/O region #3:8@f0000170 for device 0000:00:09.1
pata_via 0000:00:09.1: failed to request/iomap BARs for port 1 (errno=-16)
pata_via 0000:00:09.1: no available native port

The legacy mode IDE resources set the following order.

pci_setup_device()
    Legacy mode ATA controllers have fixed addresses.
    IDE resources: 0x1F0-0x1F7, 0x3F6, 0x170-0x177, 0x376
    |
    V
pcibios_fixup_bus()
    MIPS Cobalt PCI bus regions have the -0x10000000 offset from PCI resources.
    pcibios_fixup_bus() fix PCI bus regions.
    0x1F0 - 0x10000000 = 0xF00001F0
    |
    V
ata_pci_init_one()
    PCI: Unable to reserve I/O region #1:8@f00001f0 for device 0000:00:09.1

In some architectures, PCI bus regions have the offset from PCI resources.
For this reason, pci_setup_device() should set PCI bus regions to
dev->resource[].

[akpm@linux-foundation.org: use struct initialiser]
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMSI: Use correct data offset for 32-bit MSI in read_msi_msg()
Roland Dreier [Wed, 3 Oct 2007 18:15:11 +0000 (11:15 -0700)]
MSI: Use correct data offset for 32-bit MSI in read_msi_msg()

While reading the MSI code trying to find a reason why MSI wouldn't
work for devices that have a 32-bit MSI address capability, I noticed
that read_msi_msg() seems to read the message data from the wrong
offset in this case.

Signed-off-by: Roland Dreier <roland@digitalvampire.org>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code
Michael Ellerman [Fri, 14 Sep 2007 05:33:13 +0000 (15:33 +1000)]
PCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code

The code for dynamically assigning new ids to PCI drivers,
store_new_id(), calls list_add_tail() with the list head and new node
arguments in reversed order.

The result is that every new id written essentially overwrites the
previous list of ids.

Caught with the help of Rusty's "horribly bad" list_node patch:
 http://lkml.org/lkml/2007/6/10/10

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: i386: Compaq EVO N800c needs PCI bus renumbering
Juha Laiho [Thu, 13 Sep 2007 18:21:34 +0000 (21:21 +0300)]
PCI: i386: Compaq EVO N800c needs PCI bus renumbering

Force PCI bus renumbering for Compaq EVO N800c laptop, in order to get
the cardbus slot recognised.

Signed-off-by: Juha Laiho <Juha.Laiho@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Remove no longer correct documentation regarding MSI vector assignment
Michael Ellerman [Thu, 20 Sep 2007 02:48:23 +0000 (12:48 +1000)]
PCI: Remove no longer correct documentation regarding MSI vector assignment

The MSI vector reservation system described in Documentation/MSI-HOWTO.txt
was removed by Eric in 92db6d10bc1bc43330a4c540fa5b64c83d9d865f. Remove
the references to it in the documentation.

While we're here Â§ 5.5.1 refers to x86 hardware requirements, so make that
clear.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: re-enable onboard sound on "MSI K8T Neo2-FIR"
Johannes Goecke [Mon, 10 Sep 2007 08:46:52 +0000 (10:46 +0200)]
PCI: re-enable onboard sound on "MSI K8T Neo2-FIR"

On the "MSI K8T Neo2-FIR" board the BIOS disables the onboard
soundcard, if a second PCI soundcard is present.

This patch sets the korrect register bit to enable the onboard sound.

Removed old code in /drivers/pci/quirks.c that only checks for the
PCI-ID and fires on any Board with VIA 8237.

New code in /arch/i386/pci/fixup.c checks the DMI-tables and only runs
on the specific board.

Signed-off-by: Johannes Goecke <goecke@upb.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: quirk_vt82c586_acpi: Omit reading PCI revision ID
Auke Kok [Mon, 27 Aug 2007 23:18:10 +0000 (16:18 -0700)]
PCI: quirk_vt82c586_acpi: Omit reading PCI revision ID

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: quirk amd_8131_mmrbc: Omit reading pci revision ID
Auke Kok [Mon, 27 Aug 2007 23:17:47 +0000 (16:17 -0700)]
PCI: quirk amd_8131_mmrbc: Omit reading pci revision ID

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Peter Oruba <peter.oruba@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agocpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read
Auke Kok [Mon, 27 Aug 2007 23:17:38 +0000 (16:17 -0700)]
cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read

While PCI_CLASS_REVISION and PCI_REVISION_ID are identical, the
code here discards the revision content and is only interested in
the class number.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Krosten Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Add missing PCI capability IDs
Alex Chiang [Tue, 21 Aug 2007 23:49:07 +0000 (17:49 -0600)]
PCI: Add missing PCI capability IDs

These IDs are in pciutils, but haven't been added to the kernel
yet.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoi386: add support for picopower irq router
Thomas Backlund [Fri, 10 Aug 2007 21:42:15 +0000 (14:42 -0700)]
i386: add support for picopower irq router

Add support for PicoPower PT86C523 IRQ router to be used with the in-kernel
yenta driver for CardBus.  With this patch cardbus works on e.g.  Dell
Latitude XPi P150CD.

Initial patch for kernel 2.4 series by Sune Mølgaard
http://molgaard.org/code/linux-2.4.31-picopower.patch

Ported to 2.6.20 by Chmouel Boudjnah (http://www.chmouel.com)

Testing and confirmation that it works by Austin Acton

Cleaned up a little for inclusion in a 2.6.21-rc7 based kernel.

Added some more cleanups according to CodingStyle, as noted by
Randy Dunlap on LKML.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: Thomas Backlund <tmb@mandriva.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: pci_get_device call from interrupt in reboot fixups
Denis V. Lunev [Tue, 7 Aug 2007 09:13:18 +0000 (13:13 +0400)]
PCI: pci_get_device call from interrupt in reboot fixups

The following calltrace is possible now:
 handle_sysrq
   machine_emergency_restart
     mach_reboot_fixups
       pci_get_device
         pci_get_subsys
   down_read
The patch skips reboot fixup if called from sysrq-B code.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agodma_free_coherent() needs irqs enabled (sigh)
David Brownell [Fri, 10 Aug 2007 20:10:27 +0000 (13:10 -0700)]
dma_free_coherent() needs irqs enabled (sigh)

On at least ARM (and I'm told MIPS too) dma_free_coherent() has a newish
call context requirement: unlike its dma_alloc_coherent() sibling, it may
not be called with IRQs disabled.  (This was new behavior on ARM as of late
2005, caused by ARM SMP updates.) This little surprise can be annoyingly
driver-visible.

Since it looks like that restriction won't be removed, this patch changes
the definition of the API to include that requirement.  Also, to help catch
nonportable drivers, it updates the x86 and swiotlb versions to include the
relevant warnings.  (I already observed that it trips on the
bus_reset_tasklet of the new firewire_ohci driver.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: David Miller <davem@davemloft.net>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopci: hotplug: cpqphp: convert to kthread infrastructure
Christoph Hellwig [Tue, 14 Aug 2007 23:17:15 +0000 (16:17 -0700)]
pci: hotplug: cpqphp: convert to kthread infrastructure

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopci: hotplug: ibmphp: convert to kthread
Kristen Carlson Accardi [Tue, 14 Aug 2007 23:07:00 +0000 (16:07 -0700)]
pci: hotplug: ibmphp: convert to kthread

Convert ibmphp to new kthread api

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: is_power_of_2 in drivers/pci/pci.c
vignesh babu [Mon, 13 Aug 2007 12:53:14 +0000 (18:23 +0530)]
PCI: is_power_of_2 in drivers/pci/pci.c

Replacing n & (n - 1) for power of 2 check by is_power_of_2(n)

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopciehp: minor cleanups for pciehp_hpc.c
Kenji Kaneshige [Thu, 9 Aug 2007 23:09:38 +0000 (16:09 -0700)]
pciehp: minor cleanups for pciehp_hpc.c

Minor cleanups for pciehp_hpc.c. The 80 column rules, removing
unnecessary lines, and so on.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopciehp: remove trailing whitespace form pciehp_pci.c
Kenji Kaneshige [Thu, 9 Aug 2007 23:09:37 +0000 (16:09 -0700)]
pciehp: remove trailing whitespace form pciehp_pci.c

Remove trailing whitespaces from pciehp_pci.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopciehp: remove trailing whitespace from pciehp_ctrl.c
Kenji Kaneshige [Thu, 9 Aug 2007 23:09:36 +0000 (16:09 -0700)]
pciehp: remove trailing whitespace from pciehp_ctrl.c

Remove trailing whitespaces from pciehp_ctrl.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopciehp: remove trailing whitespace from pciehp_core.c
Kenji Kaneshige [Thu, 9 Aug 2007 23:09:35 +0000 (16:09 -0700)]
pciehp: remove trailing whitespace from pciehp_core.c

Remove trailing whitespaces from pciehp_core.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopciehp: remove trailing whitespace from pciehp_hpc.c
Kenji Kaneshige [Thu, 9 Aug 2007 23:09:34 +0000 (16:09 -0700)]
pciehp: remove trailing whitespace from pciehp_hpc.c

Remove trailing whitespaces from pciehp_hpc.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopciehp: remove DBG_XXX_ROUTINE
Kenji Kaneshige [Thu, 9 Aug 2007 23:09:33 +0000 (16:09 -0700)]
pciehp: remove DBG_XXX_ROUTINE

This patch removes DBG_ENTER_ROUTIN, DBG_LEAVE_ROUTINE and related
code, which seem no longer needed.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI Hotplug: pciehp: Request control over PCI Express Capability as well as Native...
Kristen Carlson Accardi [Thu, 9 Aug 2007 23:09:32 +0000 (16:09 -0700)]
PCI Hotplug: pciehp: Request control over PCI Express Capability as well as Native hotplug

According to the PCI firmware spec (3.0), the OS must claim control
over the PCI Express Capability bits in addition to the PCI Express
Native Hot Plug feature when executing _OSC.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI Hotplug: pciehp: Dont check bridge control on remove
Kristen Carlson Accardi [Thu, 9 Aug 2007 23:09:31 +0000 (16:09 -0700)]
PCI Hotplug: pciehp: Dont check bridge control on remove

When removing a device with a bridge on it, only read the
bridge control register if the adapter is actually present.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopciehp: remove CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE
Kenji Kaneshige [Thu, 9 Aug 2007 23:09:30 +0000 (16:09 -0700)]
pciehp: remove CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE

Remove unnecessary CONFIG_HOTPLUG_PCI_PCIE_EVENT_MODE.

The CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE option is not needed
because polling mechanism can be enabled through 'pciehp_poll_mode'
module option.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI Hotplug: cpqphp_ctrl.c: kmalloc + memset conversion to kzalloc
Mariusz Kozlowski [Tue, 31 Jul 2007 17:14:28 +0000 (19:14 +0200)]
PCI Hotplug: cpqphp_ctrl.c: kmalloc + memset conversion to kzalloc

 drivers/pci/hotplug/cpqphp_ctrl.c | 79698 -> 79638 (-60 bytes)
 drivers/pci/hotplug/cpqphp_ctrl.o | 192896 -> 192736 (-160 bytes)

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMerge branch 'hysdn' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6
Linus Torvalds [Fri, 12 Oct 2007 22:02:45 +0000 (15:02 -0700)]
Merge branch 'hysdn' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6

* 'hysdn' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  [ISDN] hysdn: convert to PCI hotplug API

17 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Fri, 12 Oct 2007 22:01:16 +0000 (15:01 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: use correct unregister function for led trigger

17 years agoUSB: fix race in autosuspend reschedule
Alan Stern [Thu, 11 Oct 2007 20:47:36 +0000 (16:47 -0400)]
USB: fix race in autosuspend reschedule

This patch (as1002) fixes a small race which can occur when a driver
expects usbcore to reschedule an autosuspend request.  If the request
arrives too late, it won't be rescheduled.  The patch adds an extra
argument to autosuspend_check(), indicating that a reschedule is
needed no matter how much time has elapsed.

It also tries to avoid letting asynchronous changes to the value of
jiffies cause a delay to become negative, by caching a local copy of
the current time.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoatmel_usba_udc: Keep track of the device status
Haavard Skinnemoen [Thu, 11 Oct 2007 20:40:30 +0000 (13:40 -0700)]
atmel_usba_udc: Keep track of the device status

Keep track of the device status (as returned by the GET_STATUS
request) and allow it to be manipulated by set_selfpowered() as
well as SET_FEATURE/CLEAR_FEATURE (for remote wakeup)

Implement the wakeup() op, which refuses to do anything if the
DEVICE_REMOTE_WAKEUP feature wasn't set by the host.  Now this
driver passes USBCV (at least, with gadget zero).

Fix one more locking bug; lockdep is every developer's friend.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: Nikon D40X unusual_devs entry
Ortwin GlĂĽck [Thu, 11 Oct 2007 15:29:43 +0000 (17:29 +0200)]
USB: Nikon D40X unusual_devs entry

Not surprisingly the Nikon D40X DSC needs the same quirks as the D40,
but it has a separate ID.
See http://bugs.gentoo.org/show_bug.cgi?id=191431

From: Ortwin GlĂĽck <odi@odi.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: serial core should respect driver requirements
Alan Stern [Wed, 10 Oct 2007 20:24:06 +0000 (16:24 -0400)]
USB: serial core should respect driver requirements

This patch (as997) fixes a bug in the USB serial core.  The core needs
to pay attention to drivers' requirements regarding the number and
type of endpoints a device has.

At the same time, the patch changes the NUM_DONT_CARE constant (which
is stored in a single-byte field) from -1 to a safer, unsigned value.
It also improves the kerneldoc for several fields in the
usb_serial_driver structure.

Finally, the patch replaces a list_for_each() with list_for_each_entry().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: documentation for USB power management
Alan Stern [Wed, 10 Oct 2007 20:24:56 +0000 (16:24 -0400)]
USB: documentation for USB power management

This patch (as998) adds documentation on how USB power management
works and how to use it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: skip autosuspended devices during system resume
Alan Stern [Wed, 10 Oct 2007 20:30:12 +0000 (16:30 -0400)]
USB: skip autosuspended devices during system resume

System suspends and hibernation are supposed to be as transparent as
possible.  By this reasoning, if a USB device is already autosuspended
before the system sleep begins then it should remain autosuspended
after the system wakes up.

This patch (as1001) adds a skip_sys_resume flag to the usb_device
structure and uses it to avoid waking up devices which were suspended
when a system sleep began.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: mutual exclusion for EHCI init and port resets
Alan Stern [Wed, 10 Oct 2007 20:27:07 +0000 (16:27 -0400)]
USB: mutual exclusion for EHCI init and port resets

This patch (as999) fixes a problem that sometimes shows up when host
controller driver modules are loaded in the wrong order.  If ehci-hcd
happens to initialize an EHCI controller while the companion OHCI or
UHCI controller is in the middle of a port reset, the reset can fail
and the companion may get very confused.  The patch adds an
rw-semaphore and uses it to keep EHCI initialization and port resets
mutually exclusive.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: David Miller <davem@davemloft.net>
Cc: Dely L Sy <dely.l.sy@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: allow usbstorage to have LUNS greater than 2Tb
Richard Sharpe [Wed, 10 Oct 2007 17:56:28 +0000 (10:56 -0700)]
USB: allow usbstorage to have LUNS greater than 2Tb

Attached is a very small patch (several comment lines) and a one-line
coded change) that allows for USB storage devices that are larger than
2TB.

At the company where I work we need such support, and one of my
co-workers, Jane Liu, pointed out that SCSI low-layer drivers need to
specify what size CDBs they accept. After looking through the code it
became obvious that the current USB Storage code accepted the default of
12-byte CDBs, so I changed it to accept 16-byte CDBs. This allows our
device to work.

Signed-off-by: Richard Sharpe <rsharpe@richardsharpe.com>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: Adding support for SHARP WS011SH to ipaq.c
Nobuhiro Iwamatsu [Wed, 10 Oct 2007 15:37:50 +0000 (00:37 +0900)]
USB: Adding support for SHARP WS011SH to ipaq.c

This patch supports for SHARP WS011SH[0] to ipaq.c

[0]: http://www.willcom-inc.com/ja/lineup/ws/011sh/index.html
(Sorry , Japanese only.)

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: add atmel_usba_udc driver
Haavard Skinnemoen [Wed, 10 Oct 2007 09:29:43 +0000 (02:29 -0700)]
USB: add atmel_usba_udc driver

This is a driver for the Atmel USBA UDC which can be found integrated
on AT32AP700x AVR32 processors. For hardware documentation, please see
the AT32AP7000 data sheet:

http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf

This is a dual speed controller (connects at high or full speed).
The driver supports up to 7 control, bulk, interrupt and isochronous
endpoints with some constraints. Bulk, interrupt and isochronous
transfers are driven by DMA.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: ohci SSB bus glue
Michael Buesch [Wed, 10 Oct 2007 06:47:17 +0000 (23:47 -0700)]
USB: ohci SSB bus glue

This adds SSB bus glue for the USB OHCI HCD.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: ehci build fixes on au1xxx, ppc-soc
David Brownell [Wed, 10 Oct 2007 05:04:16 +0000 (22:04 -0700)]
USB: ehci build fixes on au1xxx, ppc-soc

Cleanup: references to two PM routines (and HCD entry points)
that no longer exist are swapped with their replacements.

Evidently au1xxx and ppc-soc EHCI support doesn't get compiled
with power management very much, or these build bugs would have
been patched long ago.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: add runtime frame_no quirk for big-endian OHCI
Valentine Barshak [Tue, 9 Oct 2007 22:00:05 +0000 (15:00 -0700)]
USB: add runtime frame_no quirk for big-endian OHCI

Add OHCI big endian frame_no quirk.  The frame_no value stored in the
HCCA is a 16 bit field at a specific offset, but since not all CPUs can
do 16-bit memory accesses it's used as a 32 bit field.  And that's why
big-endian OHCI must shift 16 bits ... unless the spec is not followed.

Currently there's one MPC52xx platform that doesn't need the shift. This
patch adds a new "big endian frame_no" quirk to control that at runtime.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: funsoft: Fix termios
Alan Cox [Wed, 26 Sep 2007 22:22:36 +0000 (23:22 +0100)]
USB: funsoft: Fix termios

Funsoft has a bogus ioctl handler doing bogus termios handling in a bogus
manner. Fortunately we can simply delete all the bogus bits and get the
right default behaviour !

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: visor: termios bits
Alan Cox [Wed, 26 Sep 2007 22:34:18 +0000 (23:34 +0100)]
USB: visor: termios bits

Visor has a huge complex routine which displays termios bits for debug
but doesn't do anything. Get the correct behaviour by removing it all

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: unusual_devs entry for Nikon DSC D2Xs
Alan Stern [Fri, 5 Oct 2007 18:43:00 +0000 (14:43 -0400)]
USB: unusual_devs entry for Nikon DSC D2Xs

This patch (as996) adds an unusual_devs entry for the Nikon DSC D2Xs
camera.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: re-remove <linux/usb_sl811.h>
David Brownell [Fri, 5 Oct 2007 01:06:16 +0000 (18:06 -0700)]
USB: re-remove <linux/usb_sl811.h>

Remove <linux/usb_sl811.h> ... somehow this was recreated when
the Blackfin arch was merged, instead of using <linux/usb/sl811.h>
which is the correct header.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: move <linux/usb_gadget.h> to <linux/usb/gadget.h>
David Brownell [Fri, 5 Oct 2007 01:05:17 +0000 (18:05 -0700)]
USB: move <linux/usb_gadget.h> to <linux/usb/gadget.h>

Move <linux/usb_gadget.h> to <linux/usb/gadget.h>, reducing
some of the clutter in the main include directory.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: Export URB statistics for powertop
Sarah Sharp [Wed, 3 Oct 2007 21:56:03 +0000 (14:56 -0700)]
USB: Export URB statistics for powertop

powertop currently tracks interrupts generated by uhci, ehci, and ohci,
but it has no way of telling which USB device to blame USB bus activity on.
This patch exports the number of URBs that are submitted for a given device.
Cat the file 'urbnum' in /sys/bus/usb/devices/.../

Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: serial gadget: Disable endpoints on unload
Vitaly Bordug [Wed, 26 Sep 2007 20:36:22 +0000 (00:36 +0400)]
USB: serial gadget: Disable endpoints on unload

After Serial gadget is being unloaded, neither serial itself, nor other
gadget stuff can be loaded subsequently.

Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: drivers/usb/misc/sisusbvga/sisusb.c: kill two unused variables
WANG Cong [Tue, 2 Oct 2007 21:40:49 +0000 (14:40 -0700)]
USB: drivers/usb/misc/sisusbvga/sisusb.c: kill two unused variables

Kill two unused variables in drivers/usb/misc/sisusbvga/sisusb.c.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agousb-gadget-ether: prevent oops caused by error interrupt race
Benedikt Spranger [Tue, 2 Oct 2007 21:40:48 +0000 (14:40 -0700)]
usb-gadget-ether: prevent oops caused by error interrupt race

Fix a longstanding race in the Ethernet gadget driver, which can cause an
oops on device disconnect.  The fix is just to make the TX path check
whether its freelist is empty.  That check is otherwise not necessary,
since the queue is always stopped when that list empties (and restarted
when request completion puts an entry back on that freelist).

The race window starts when the network code decides to transmit a packet,
and ends when hard_start_xmit() grabs the freelist lock.  When disconnect()
is called inside that window, it shuts down the TX queue and breaks the
otherwise-solid assumption that packets are never sent through a TX queue
that's stopped.

Signed-off-by: Benedikt Spranger <bene@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: fix gregkh-usb-usb-sisusb2vga-convert-printk-to-dev_-macros
Andrew Morton [Tue, 2 Oct 2007 21:40:46 +0000 (14:40 -0700)]
USB: fix gregkh-usb-usb-sisusb2vga-convert-printk-to-dev_-macros

drivers/usb/misc/sisusbvga/sisusb.c: In function 'sisusb_open':
drivers/usb/misc/sisusbvga/sisusb.c:2444: warning: 'sisusb' is used uninitialized in this function

I can tell that'll oops just by looking at it.

How come this code assume a 7,000 column xterm? :(

Cc: Felipe Balbi <felipe.lima@indt.org.br>
Cc: Thomas <thomas@winischhofer.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: r8a66597-hcd: fix driver removing
Yoshihiro Shimoda [Fri, 5 Oct 2007 06:53:12 +0000 (15:53 +0900)]
USB: r8a66597-hcd: fix driver removing

Fixed the problem that accessed register of this controller after
having called iounmap().

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: r8a66597-hcd: fix endian problem
Yoshihiro Shimoda [Wed, 3 Oct 2007 09:53:28 +0000 (18:53 +0900)]
USB: r8a66597-hcd: fix endian problem

Fixed the problem that does not work in the big endian machine.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: r8a66597-hcd: fix Class or Vendor Request
Yoshihiro Shimoda [Wed, 3 Oct 2007 09:53:13 +0000 (18:53 +0900)]
USB: r8a66597-hcd: fix Class or Vendor Request

Fixed the problem that does not work in the case of bRequest = 0x05 in
Class or Vendor Request.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: usb/serial/ch341.c: make 4 functions static
Adrian Bunk [Sun, 9 Sep 2007 20:25:04 +0000 (22:25 +0200)]
USB: usb/serial/ch341.c: make 4 functions static

This patch makes four needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: Driver for CH341 USB-serial adaptor
Frank A Kingswood [Wed, 22 Aug 2007 19:48:58 +0000 (20:48 +0100)]
USB: Driver for CH341 USB-serial adaptor

This patch implements a USB serial port driver for the Winchiphead
CH341 USB-RS232 Converter. This chip also implements an IEEE 1284
parallel port, I2C and SPI, but that is not supported by the driver.

Signed-off-by: Frank A Kingswood <frank@kingswood-consulting.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: cxacru: Use appropriate logging for errors
Simon Arlott [Tue, 25 Sep 2007 19:20:10 +0000 (20:20 +0100)]
USB: cxacru: Use appropriate logging for errors

When an error occurs, existing logging uses dbg() so the cause of a
problem is hard to determine. Error conditions shouldn't only be
properly reported with debugging enabled.

A side effect of this change is that when an uninitialised device is
started, a log message similar to the following is sent:
cxacru 5-2:1.0: receive of cm 0x90 failed (-104)
This is normal - the device did not respond so firmware will be loaded.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Acked-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: cp2101.c: add additional device ID
Edouard Lafargue [Tue, 25 Sep 2007 08:15:36 +0000 (10:15 +0200)]
USB: cp2101.c: add additional device ID

This patch adds an additional device ID to the cp2101 USB serial
driver. This device is a Gemalto Prox-PU or CU contactless card reader
(ISO14443-A/B and Mifare). The reader is a standard Gemalto serial
proximity reader using the Gemalto Block Protocol (see reader's
documentation) bundled with a built-in CP2102 for serial/USB
conversion.

Signed-off-by: Edouard Lafargue (edouard@lafargue.name)
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: unusual_devs modification for Nikon D200
Phil Dibowitz [Sun, 23 Sep 2007 03:58:12 +0000 (20:58 -0700)]
USB: unusual_devs modification for Nikon D200

Upgrade the unusual_devs.h file to support the Nikon D200

Signed-off-by: Mike Pagano <mpagano-kernel@mpagano.com>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: remove USB_QUIRK_NO_AUTOSUSPEND
Alan Stern [Fri, 21 Sep 2007 20:57:54 +0000 (16:57 -0400)]
USB: remove USB_QUIRK_NO_AUTOSUSPEND

This patch (as995) cleans up the remains of the former NO_AUTOSUSPEND
quirk.  Since autosuspend is disabled by default, we will let
userspace worry about which devices can safely be suspended.  Thus the
lengthy series of quirk entries is no longer needed, and neither is
the quirk ID.  I suppose someone might eventually run across a hub
that can't be suspended; let's ignore the possibility for now.

The patch also cleans up the hasty way in which autosuspend gets
disabled.  Setting udev->autosuspend_delay to -1 wasn't quite right,
because the value is always supposed to be a multiple of HZ.  It's
better to leave the delay value alone and set autosuspend_disabled,
which is what the quirk routine used to do.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: don't propagate FREEZE or PRETHAW suspends
Alan Stern [Thu, 20 Sep 2007 16:37:50 +0000 (12:37 -0400)]
USB: don't propagate FREEZE or PRETHAW suspends

This patch (as992) fixes a recently-added bug.  During a FREEZE or
PRETHAW suspend notification, non-root devices don't actually get
suspended.  So we shouldn't tell their parent hubs that they did.

(This code path used to be skipped over, until the FREEZE/PRETHAW test
got moved out of usb_suspend_both() into generic_suspend().)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: unusual_devs update for Nokia 6131
Alan Stern [Tue, 18 Sep 2007 14:09:32 +0000 (10:09 -0400)]
USB: unusual_devs update for Nokia 6131

This patch (as991) updates the unusual_devs entry for the Nokia 6131
phone.  As reported by Juan Ignacio Cherrutti, there's new firmware
available but it still has the same old transfer-size limit.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: fix limited_power setting mistake in hub.c
jidong xiao [Thu, 13 Sep 2007 16:08:51 +0000 (00:08 +0800)]
USB: fix limited_power setting mistake in hub.c

This patch (jx001) fixes a variable assignment mistake in hub driver.
limited_power should be set to 0 if the hub is self-powered,and 1 if
the hub is bus-powered.

However, the effect of the code was exactly opposite to the spec's
statement for the Local Power Source field. The spec says, this field
is 1 meaning Local power supply lost while this field is 0 indicating
Local power supply good.(This statement is very confusing.)

So this patch switchs the 0 and 1.

Signed-off-by: Jason Xiao <jidong.xiao@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: fix double frees in error code paths of ipaq driver
Oliver Neukum [Mon, 17 Sep 2007 18:15:53 +0000 (20:15 +0200)]
USB: fix double frees in error code paths of ipaq driver

the error code paths can be enter with buffers to freed buffers.
Serial core would do a kfree() on memory already freed.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: always visit drivers/usb/misc/
Adrian Bunk [Tue, 11 Sep 2007 17:10:21 +0000 (19:10 +0200)]
USB: always visit drivers/usb/misc/

Currently, every driver under drivers/usb/misc/ also has to be listed in
drivers/usb/Makefile. This has been forgotten more than once, and this
patch changes drivers/usb/Makefile to simply always visit
drivers/usb/misc/ when building the USB code.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Toralf Förster <toralf.foerster@gmx.de>
Acked-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: usb-skeleton leaking locks on open
Mark Gross [Mon, 24 Sep 2007 16:28:14 +0000 (09:28 -0700)]
USB: usb-skeleton leaking locks on open

This weekend I was hacking around with a trivial USB driver for talking
to the boot load firmware of a USB Bit Whacker.  It's running the
MicroChip Pic18 boot loader firmware and I'm putting together a flash
program for writing new FW to the thing.

Anyway in my use of the usb-skeleton.c as my starting point I discovered
my test program was getting hung up after attempting to write a buffer.
The application and driver where hung in a way that required me to
reboot to get it to clean up so I could try again.

It turned out the code path through skel_open can grap the driver's
io_mutex lock and forget to release it.

The following patch fixes the problem for me.

Signed-off-by: Mark Gross <mgross@linux.intel.com>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: flush outstanding URBs when suspending
Alan Stern [Mon, 10 Sep 2007 15:34:26 +0000 (11:34 -0400)]
USB: flush outstanding URBs when suspending

This patch (as989) makes usbcore flush all outstanding URBs for each
device as the device is suspended.  This will be true even when
CONFIG_USB_SUSPEND is not enabled.

In addition, an extra can_submit flag is added to the usb_device
structure.  That flag will be turned off whenever a suspend request
has been received for the device, even if the device isn't actually
suspended because CONFIG_USB_SUSPEND isn't set.

It's no longer necessary to check for the device state being equal to
USB_STATE_SUSPENDED during URB submission; that check can be replaced
by a check of the can_submit flag.  This also permits us to remove
some questionable references to the deprecated power.power_state field.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: break apart flush_endpoint and disable_endpoint
Alan Stern [Mon, 10 Sep 2007 15:33:05 +0000 (11:33 -0400)]
USB: break apart flush_endpoint and disable_endpoint

This patch (as988) breaks usb_hcd_endpoint_disable() apart into two
routines.  The first, usb_hcd_flush_endpoint() does the -ESHUTDOWN
unlinking of all URBs in the endpoint's queue and waits for them to
complete.  The second, usb_hcd_disable_endpoint() -- renamed for
better grammatical style -- merely calls the HCD's endpoint_disable
method.  The changeover is easy because the routine currently has only
one caller.

This separation of function will be exploited in the following patch:
When a device is suspended, the core will be able to cancel all
outstanding URBs for that device while leaving the HCD's
endpoint-related data structures intact for later.

As an added benefit, HCDs no longer need to check for existing URBs in
their endpoint_disable methods.  It is now guaranteed that there will
be none.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: move decision to ignore FREEZE events
Alan Stern [Mon, 10 Sep 2007 15:31:43 +0000 (11:31 -0400)]
USB: move decision to ignore FREEZE events

This patch (as987) changes the way FREEZE and PRETHAW suspend events
are handled in usbcore.  The decision about whether or not to ignore
them for non-root devices is pushed down into the USB-device driver,
instead of being made in the core code.

This is appropriate, since devices exported to a virtualized guest or
over a network may indeed need to handle these types of suspend, even
though normal devices don't.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: Get rid of annoying endpoint-release message
Alan Stern [Mon, 10 Sep 2007 15:35:14 +0000 (11:35 -0400)]
USB: Get rid of annoying endpoint-release message

This patch (as990) removes an annoying debugging message.  Nobody
really cares when endpoint pseudo-devices are released.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: AMD5536: use pdev->revision
Auke Kok [Mon, 27 Aug 2007 23:16:13 +0000 (16:16 -0700)]
USB: AMD5536: use pdev->revision

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Thomas Dahlmann <thomas.dahlmann@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: sisusbvga: Fix bug
Satyam Sharma [Sun, 2 Sep 2007 20:07:31 +0000 (01:37 +0530)]
USB: sisusbvga: Fix bug

drivers/usb/misc/sisusbvga/sisusb.c: In function sisusb_open
drivers/usb/misc/sisusbvga/sisusb.c:2444: warning: sisusb is used uninitialized in this function

is a genuine bug (which will cause oops). We cannot use "sisusb" in
error path for (!interface), because sisusb will itself be derived
from "interface" later.

Signed-off-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: fix errornous assumption in the usb serial framework revealed by iuu_phoenix
Oliver Neukum [Fri, 17 Aug 2007 12:01:38 +0000 (14:01 +0200)]
USB: fix errornous assumption in the usb serial framework revealed by iuu_phoenix

the iuu_phoenix driver submits another URB from a completion handler.
This dictates a certain order of calls to usb_kill_urb() in kill_traffic().
As other drivers may do it the other way round, we need to use both
orders in kill_traffic().
This patch does so and should be merged before iuu_phoenix is merged.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: ELAN U132 Host Controller Driver: convert sw_lock to mutex
Matthias Kaehlcke [Thu, 6 Sep 2007 21:18:15 +0000 (23:18 +0200)]
USB: ELAN U132 Host Controller Driver: convert sw_lock to mutex

The ELAN U132 Host Controller Driver uses the semaphore sw_lock as
mutex. Use the mutex API instead of the (binary) semaphore.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: usb-storage: Initialize Huawei E220 properly
Johann Wilhelm [Wed, 5 Sep 2007 11:49:29 +0000 (13:49 +0200)]
USB: usb-storage: Initialize Huawei E220 properly

This is a reworked version of this patch:
http://www.mail-archive.com/linux-usb-devel%40lists.sourceforge.net/msg55094/activate_huawei_dev.patch

That properly initializes the HUAWEI E220 devices into multi-port mode.

Signed-off-by: Johann Wilhelm <johann.wilhelm@student.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: fix location of statement label in dummy-hcd
Alan Stern [Tue, 4 Sep 2007 13:53:24 +0000 (09:53 -0400)]
USB: fix location of statement label in dummy-hcd

This patch (as984) fixes a rather elementary mistake in dummy_hcd.
The new statement label should come before the spin_unlock_irqrestore,
not after it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>