addr = 0;
while (1)
{
/* map a page into memory each time*/
if ((addr = (char *) mmap(addr,page_size, PROT_READ |
PROT_WRITE,MAP_SHARED,fd,0)) == MAP_FAILED)
{
printf("cant do mmap on file\n");
exit(1);
}
if (0 == i)
addr1 = addr;
i++;
errno = 0;
/* lock the mapped memory pagewise*/
if ((ret = mlock((char *)addr, 1500)) == -1)
{
printf("errno value is %d\n", errno);
printf("cant lock maped region\n");
exit(1);
}
addr = addr + page_size;
}
}
======================================================
This testcase results in an mlock() failure with errno 14 that is EFAULT,
but it has nowhere been specified that mlock() will return EFAULT. When I
tested the same on older kernels like 2.6.18, I got the correct result i.e
errno 12 (ENOMEM).
I think in source code mlock(2), setting errno ENOMEM has been missed in
do_mlock() , on mlock_fixup() failure.
SUSv3 requires the following behavior frmo mlock(2).
[ENOMEM]
Some or all of the address range specified by the addr and
len arguments does not correspond to valid mapped pages
in the address space of the process.
[EAGAIN]
Some or all of the memory identified by the operation could not
be locked when the call was made.
This rule isn't so nice and slighly strange. but many people think
POSIX/SUS compliance is important.
Gerard Kam [Mon, 4 Aug 2008 20:41:12 +0000 (13:41 -0700)]
atmel_spi: fix hang due to missed interrupt
For some time my at91sam9260 board with JFFS2 on serial flash (m25p80)
would hang when accessing the serial flash and SPI bus. Slowing the SPI
clock down to 9 MHz reduced the occurrence of the hang from "always"
during boot to a nuisance level that allowed other SW development to
continue. Finally had to address this issue when an application stresses
the I/O to always cause a hang.
Hang seems to be caused by a missed SPI interrupt, so that the task ends
up waiting forever after calling spi_sync(). The fix has 2 parts. First
is to halt the DMA engine before the "current" PDC registers are loaded.
This ensures that the "next" registers are loaded before the DMA operation
takes off. The second part of the fix is a kludge that adds a
"completion" interrupt in case the ENDRX interrupt for the last segment of
the DMA chaining operation was missed.
The patch allows the SPI clock for the serial flash to be increased from 9
MHz to 15 MHz (or more?). No hangs or SPI overruns were encountered.
Haavard: while this patch does indeed improve things, I still see overruns
and CRC errors on my NGW100 board when running the DataFlash at 10 MHz.
However, I think some improvement is better than nothing, so I'm passing
this on for inclusion in 2.6.27.
Signed-off-by: Gerard Kam <gerardk5@verizon.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks [Mon, 4 Aug 2008 20:41:10 +0000 (13:41 -0700)]
spi: S3C24XX: reset register status on resume.
Fix a bug in the spi_s3c24xx driver where it does not reset the registers
of the hardware when resuming from suspend (this block has been reset over
suspend).
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The changes cause problems for at least the sparc build. Let's re-do
them when the exact issues are resolved.
Requested-by: Andrew Morton <akpm@linux-foundation.org> Requested-by: Steven Whitehouse <swhiteho@redhat.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 4 Aug 2008 23:36:20 +0000 (16:36 -0700)]
Revert "[SCSI] extend the last_sector_bug flag to cover more sectors"
This reverts commit 2b142900784c6e38c8d39fa57d5f95ef08e735d8, since it
seems to break some other USB storage devices (at least a JMicron USB to
ATA bridge). As such, while it apparently fixes some cardreaders, it
would need to be made conditional on the exact reader it fixes in order
to avoid causing regressions.
Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 3 Aug 2008 17:50:44 +0000 (10:50 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: remove write-only variables from ext4_ordered_write_end
ext4: unexport jbd2_journal_update_superblock
ext4: Cleanup whitespace and other miscellaneous style issues
ext4: improve ext4_fill_flex_info() a bit
ext4: Cleanup the block reservation code path
ext4: don't assume extents can't cross block groups when truncating
ext4: Fix lack of credits BUG() when deleting a badly fragmented inode
ext4: Fix ext4_ext_journal_restart()
ext4: fix ext4_da_write_begin error path
jbd2: don't abort if flushing file data failed
ext4: don't read inode block if the buffer has a write error
ext4: Don't allow lg prealloc list to be grow large.
ext4: Convert the usage of NR_CPUS to nr_cpu_ids.
ext4: Improve error handling in mballoc
ext4: lock block groups when initializing
ext4: sync up block and inode bitmap reading functions
ext4: Allow read/only mounts with corrupted block group checksums
ext4: Fix data corruption when writing to prealloc area
In file included from arch/arm/mach-pxa/pcm990-baseboard.c:25:
include/linux/ide.h:645: error: 'CONFIG_IDE_MAX_HWIFS' undeclared here (not in a function)
Fix it by removing unneeded header include.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Sat, 2 Aug 2008 21:33:18 +0000 (22:33 +0100)]
[ARM] Fix explicit asm(-arm)?/arch-foo references
No file should be explicitly referencing its own platform headers
by specifying an absolute include path. Fix these paths to use
standard <asm/arch/...> includes.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* git://git.infradead.org/users/dwmw2/random-2.6:
[MTD] Fix !CONFIG_BLOCK compile for mtdsuper.c
firmware: silence __fw_modbuild and __fw_modinst 'Nothing to be done' messages
Miklos Szeredi [Fri, 1 Aug 2008 18:28:47 +0000 (20:28 +0200)]
mm: dont clear PG_uptodate on truncate/invalidate
Brian Wang reported that a FUSE filesystem exported through NFS could
return I/O errors on read. This was traced to splice_direct_to_actor()
returning a short or zero count when racing with page invalidation.
However this is not FUSE or NFSD specific, other filesystems (notably
NFS) also call invalidate_inode_pages2() to purge stale data from the
cache.
If this happens while such pages are sitting in a pipe buffer, then
splice(2) from the pipe can return zero, and read(2) from the pipe can
return ENODATA.
The zero return is especially bad, since it implies end-of-file or
disconnected pipe/socket, and is documented as such for splice. But
returning an error for read() is also nasty, when in fact there was no
error (data becoming stale is not an error).
The same problems can be triggered by "hole punching" with
madvise(MADV_REMOVE).
Fix this by not clearing the PG_uptodate flag on truncation and
invalidation.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Woodhouse [Fri, 1 Aug 2008 23:01:21 +0000 (00:01 +0100)]
[MTD] Fix !CONFIG_BLOCK compile for mtdsuper.c
As reported by Adrian Bunk, commit d5686b444ff3f72808d2b3fbd58672a86cdf38e7
(switch mtd and dm-table to lookup_bdev()) causes the following compile
error with CONFIG_BLOCK=n:
CC drivers/mtd/mtdsuper.o
drivers/mtd/mtdsuper.c: In function `get_sb_mtd':
drivers/mtd/mtdsuper.c:184: error: implicit declaration of function 'lookup_bdev'
drivers/mtd/mtdsuper.c:184: warning: assignment makes pointer from integer without a cast
drivers/mtd/mtdsuper.c:197: error: implicit declaration of function 'bdput'
make[3]: *** [drivers/mtd/mtdsuper.o] Error 1
Fix it by putting the block device lookup inside #ifdef CONFIG_BLOCK
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
David Woodhouse [Fri, 1 Aug 2008 22:58:36 +0000 (23:58 +0100)]
firmware: silence __fw_modbuild and __fw_modinst 'Nothing to be done' messages
People don't like them and think they're errors.
Leave the __fw_install one though; when 'make firmware_install' does
nothing, it's best to have a 'Nothing to be done for...' message rather
than just doing nothing.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Tim Bird [Fri, 1 Aug 2008 21:05:50 +0000 (14:05 -0700)]
embedded: fix vc_translate operator precedence
This fixes a bug in operator precedence in the newly introduced vc_translate
macro. Without this fix, the translation of some characters on the
kernel console is garbled.
This patch was copied to the e-mail list previously for testing. Now,
all reports confirm that it works, so this is an official post for
application.
Signed-off-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Steven Rostedt [Thu, 31 Jul 2008 16:40:52 +0000 (12:40 -0400)]
dual license ftrace.txt
I asked legal about the licensing of ftrace.txt, and they told me that,
unless the Documentation directory is specifically set up to handle non
GPL licenses (which it does not appear to be), then it would be best to
put ftrace.txt under the GPL.
This patch adds a dual license to ftrace.txt such that it is under both
the FDL and the GPL.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently function tty_ldisc_get() tries to load an ldisc driver module
only when tty_ldisc_try_get() returns -EAGAIN. This happens only if
module is being unloaded. If ldisc module is not loaded
tty_ldisc_try_get() returns -EINVAL and this case is not handled in
tty_ldisc_get(), so request_module() is not called.
Attached patch fixes this by calling request_module() if
tty_ldisc_try_get() returned any error code.
I discovered this when my UMTS modem stopped working with 2.6.27-rc1
because module ppp_async was not loaded.
Linus Torvalds [Fri, 1 Aug 2008 19:48:16 +0000 (12:48 -0700)]
Merge branch 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm
* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
KVM: s390: Fix kvm on IBM System z10
KVM: Advertise synchronized mmu support to userspace
KVM: Synchronize guest physical memory map to host virtual memory map
KVM: Allow browsing memslots with mmu_lock
KVM: Allow reading aliases with mmu_lock
Some platform decide whether they support huge pages at boot time. On
these, such as powerpc, HPAGE_SHIFT is a variable, not a constant, and is
set to 0 when there is no such support.
The patches to introduce multiple huge pages support broke that causing
the kernel to crash at boot time on machines such as POWER3 which lack
support for multiple page sizes.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yoshinori Sato [Thu, 31 Jul 2008 07:07:29 +0000 (00:07 -0700)]
Missing symbol prefix on vmlinux.lds.h
ARCH=h8300:
init/main.c:781: undefined reference to `___early_initcall_end'
Same problem have
__start___bug_table
__stop___bug_table
__tracedata_start
__tracedata_end
__per_cpu_start
__per_cpu_end
When defining a symbol in vmlinux.lds, use the VMLINUX_SYMBOL macro.
VMLINUX_SYMBOL adds a prefix charactor.
You can't just use straight symbol names in common header files as they
dont take into consideration weird arch-specific ABI conventions. in the
case of Blackfin/h8300, the ABI dictates that any C-visible symbols have
an underscore prefixed to them. Thus all symbols in vmlinux.lds.h need to
be wrapped in VMLINUX_SYMBOL() so that each arch can put hide this magic
in their own files.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: "Mike Frysinger" <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PNP: fix formatting of dbg_pnp_show_resources() output
Each resource should be printed on its own line, so start snprintf'ing
at the beginning of the buffer every time through the loop.
Also, use scnprintf() rather than snprintf() when building up the
buffer to print. scnprintf() returns the number of characters actually
written into the buffer (not including the trailing NULL).
snprintf() returns the number of characters that *would be* written,
assuming everything would fit in the buffer. That's nice if we want to
resize the buffer to make sure everything fits, but in this case, I
just want to keep from overflowing the buffer, and it's OK if the
output is truncated.
Using snprintf() meant that my "len" could grow to be more than the
the buffer size, which makes "sizeof(buf) - len" negative, which causes
this alarming WARN_ON:
http://marc.info/?l=linux-kernel&m=121736480005656&w=2
More useful snprintf/scnprintf discussion:
http://lwn.net/Articles/69419/
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reported-by: Pete Clements <clem@clem.clem-digital.net> Cc: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Niels de Vos [Thu, 31 Jul 2008 07:07:23 +0000 (00:07 -0700)]
Remove newline from the description of module parameters
Some module parameters with only one line have the '\n' at the end of the
description. This is not needed nor wanted as after the description the
type (i.e. int) is followed by a newline.
Some modules contain a multi-line description, these are not affected
by this patch.
Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Ed L. Cashin <ecashin@coraid.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Roland Dreier <rolandd@cisco.com> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 1 Aug 2008 19:41:29 +0000 (12:41 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
pata_it821x: Driver updates and reworking
libata.h: replace __FUNCTION__ with __func__
ata_piix: subsys 106b:00a3 is apple ich8m too
libata-core: make sure that ata_force_tbl is freed in case of an error
libata: update atapi disable handling
pata_via: add VX800 flag; add function for fixing h/w bugs
pata_ali: misplaced pci_dev_put()
Linus Torvalds [Fri, 1 Aug 2008 19:39:09 +0000 (12:39 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-pull
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-pull: (64 commits)
[XFS] Remove vn_revalidate calls in xfs.
[XFS] Now that xfs_setattr is only used for attributes set from ->setattr
[XFS] xfs_setattr currently doesn't just handle the attributes set through
[XFS] fix use after free with external logs or real-time devices
[XFS] A bug was found in xfs_bmap_add_extent_unwritten_real(). In a
[XFS] fix compilation without CONFIG_PROC_FS
[XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/
[XFS] fix mount option parsing in remount
[XFS] Disable queue flag test in barrier check.
[XFS] streamline init/exit path
[XFS] Fix up problem when CONFIG_XFS_POSIX_ACL is not set and yet we still
[XFS] Don't assert if trying to mount with blocksize > pagesize
[XFS] Don't update mtime on rename source
[XFS] Allow xfs_bmbt_split() to fallback to the lowspace allocator
[XFS] Restore the lowspace extent allocator algorithm
[XFS] use minleft when allocating in xfs_bmbt_split()
[XFS] attrmulti cleanup
[XFS] Check for invalid flags in xfs_attrlist_by_handle.
[XFS] Fix CI lookup in leaf-form directories
[XFS] Use the generic xattr methods.
...
Roland McGrath [Thu, 31 Jul 2008 09:04:09 +0000 (02:04 -0700)]
tracehook: fix exit_signal=0 case
My commit 2b2a1ff64afbadac842bbc58c5166962cf4f7664 introduced a regression
(sorry about that) for the odd case of exit_signal=0 (e.g. clone_flags=0).
This is not a normal use, but it's used by a case in the glibc test suite.
Dying with exit_signal=0 sends no signal, but it's supposed to wake up a
parent's blocked wait*() calls (unlike the delayed_group_leader case).
This fixes tracehook_notify_death() and its caller to distinguish a
"signal 0" wakeup from the delayed_group_leader case (with no wakeup).
Linus Torvalds [Fri, 1 Aug 2008 18:56:07 +0000 (11:56 -0700)]
Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
md: raid10: wake up frozen array
md: do not count blocked devices as spares
md: do not progress the resync process if the stripe was blocked
md: delay notification of 'active_idle' to the recovery thread
md: fix merge error
md: move async_tx_issue_pending_all outside spin_lock_irq
Linus Torvalds [Fri, 1 Aug 2008 18:54:05 +0000 (11:54 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
[PATCH] ocfs2: Release mutex in error handling code
[PATCH] ocfs2: Fix oops when racing files truncates with writes into an mmap region
[PATCH 2/2] ocfs2: Fix race between mount and recovery
[PATCH 1/2] ocfs2: Add counter in struct ocfs2_dinode to track journal replays
[PATCH] configfs: Convenience macros for attribute definition.
[PATCH] configfs: Pin configfs subsystems separately from new config_items.
[PATCH] configfs: Fix open directory making rmdir() fail
[PATCH] configfs: Lock new directory inodes before removing on cleanup after failure
[PATCH] configfs: Prevent userspace from creating new entries under attaching directories
[PATCH] configfs: Fix failing symlink() making rmdir() fail
[PATCH] configfs: Fix symlink() to a removing item
[PATCH] configfs: Include linux/err.h in linux/configfs.h
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild: scripts/ver_linux: don't set PATH
Kconfig/init: change help text to match default value
kbuild: genksyms: Include extern information in dumps
kbuild: genksyms parser: fix the __attribute__ rule
kbuild: scripts/genksyms/lex.l: add %option noinput
kconfig: scripts/kconfig/zconf.l: add %option noinput
kbuild: fix O=... build of um
Linus Torvalds [Fri, 1 Aug 2008 18:46:00 +0000 (11:46 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
md: the bitmap code needs to use blk_plug_device_unlocked()
block: add a blk_plug_device_unlocked() that grabs the queue lock
Linus Torvalds [Fri, 1 Aug 2008 18:45:09 +0000 (11:45 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kgdb: fix gdb serial thread queries
kgdb: fix kgdb_validate_break_address to perform a mem write
kgdb: remove the requirement for CONFIG_FRAME_POINTER
Linus Torvalds [Fri, 1 Aug 2008 18:44:24 +0000 (11:44 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: ASoC: Export dapm_reg_event() fully
ALSA: ASoC: Update Poodle to current ASoC API
ALSA: asoc: restrict sample rate and size in Freescale MPC8610 sound drivers
ALSA: sound/soc/pxa/tosa.c: removed duplicated include
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits)
tcp: MD5: Fix IPv6 signatures
skbuff: add missing kernel-doc for do_not_encrypt
net/ipv4/route.c: fix build error
tcp: MD5: Fix MD5 signatures on certain ACK packets
ipv6: Fix ip6_xmit to send fragments if ipfragok is true
ipvs: Move userspace definitions to include/linux/ip_vs.h
netdev: Fix lockdep warnings in multiqueue configurations.
netfilter: xt_hashlimit: fix race between htable_destroy and htable_gc
netfilter: ipt_recent: fix race between recent_mt_destroy and proc manipulations
netfilter: nf_conntrack_tcp: decrease timeouts while data in unacknowledged
irda: replace __FUNCTION__ with __func__
nsc-ircc: default to dongle type 9 on IBM hardware
bluetooth: add quirks for a few hci_usb devices
hysdn: remove the packed attribute from PofTimStamp_tag
isdn: use the common ascii hex helpers
tg3: adapt tg3 to use reworked PCI PM code
atm: fix direct casts of pointers to u32 in the InterPhase driver
atm: fix const assignment/discard warnings in the ATM networking driver
net: use the common ascii hex helpers
random32: seeding improvement
...
Jens Axboe [Fri, 1 Aug 2008 18:31:32 +0000 (20:31 +0200)]
block: add a blk_plug_device_unlocked() that grabs the queue lock
blk_plug_device() must be called with the queue lock held, so callers
often just grab and release the lock for that purpose. Add a helper
that does just that.
Linus Torvalds [Fri, 1 Aug 2008 18:29:54 +0000 (11:29 -0700)]
Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
[MTD] [NAND] drivers/mtd/nand/nandsim.c: fix printk warnings
[MTD] [NAND] Blackfin NFC Driver: Cleanup the error exit path of bf5xx_nand_probe function
[MTD] [NAND] Blackfin NFC Driver: use standard dev_err() rather than printk()
[MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by default
[MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove functions
[MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses
[MTD] [NAND] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10
[MTD] [NAND] Blackfin NFC Driver: fix bug - do not clobber the status from the first 256 bytes if operating on 512 pages
[MTD] [NAND] diskonchip.c fix sparse endian warnings
[MTD] [NAND] drivers/mtd/nand/nandsim.c needs div64.h
[JFFS2] Fix allocation of summary buffer
Fix rename of at91_nand -> atmel_nand
[MTD] [NOR] drivers/mtd/chips/jedec_probe.c: fix Am29DL800BB device ID
[MTD] MTD_DEBUG always does compile-time typechecks
[MTD] DataFlash: bugfix, binary page sizes now handled
[MTD] [NAND] fsl_elbc_nand.c: fix printk warning
[MTD] [NAND] nandsim: support random page read command
[MTD] [NAND] fix subpage read for small page NAND
Linus Torvalds [Fri, 1 Aug 2008 18:26:51 +0000 (11:26 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
[PATCH] pass struct path * to do_add_mount()
[PATCH] switch mtd and dm-table to lookup_bdev()
[patch 3/4] vfs: remove unused nameidata argument of may_create()
[PATCH] devpts: switch to IDA
[PATCH 2/2] proc: switch inode number allocation to IDA
[PATCH 1/2] proc: fix inode number bogorithmetic
[PATCH] fix bdev leak in block_dev.c do_open()
[PATCH] fix races and leaks in vfs_quota_on() users
[PATCH] clean dup2() up a bit
[PATCH] merge locate_fd() and get_unused_fd()
[PATCH] ipv4_static_sysctl_init() should be under CONFIG_SYSCTL
Re: BUG at security/selinux/avc.c:883 (was: Re: linux-next: Tree
Linus Torvalds [Fri, 1 Aug 2008 18:23:09 +0000 (11:23 -0700)]
Merge branch 'audit.b54' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current
* 'audit.b54' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
[PATCH] Fix the bug of using AUDIT_STATUS_RATE_LIMIT when set fail, no error output.
[PATCH] Fix the kernel panic of audit_filter_task when key field is set
Re: [PATCH] the loginuid field should be output in all AUDIT_CONFIG_CHANGE audit messages
kernel/audit.c control character detection is off-by-one
[PATCH] Audit: Collect signal info when SIGUSR2 is sent to auditd
Linus Torvalds [Fri, 1 Aug 2008 18:22:45 +0000 (11:22 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
au1xmmc: raise segment size limit.
mmc_block: use proper sg iterators
mmc: properly iterate over sg list in debug check
mmc_test: Revert "mmc_test: test oversized sg lists"
sdhci: check correct return value
sdhci: disable DMA for req, not completely
sdhci: handle bug in JMB38x for sizes < 4 bytes
Linus Torvalds [Fri, 1 Aug 2008 17:55:07 +0000 (10:55 -0700)]
Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
power_supply: Sharp SL-6000 (tosa) batteries support
power_supply: fix up CHARGE_COUNTER output to be more precise
power_supply: add CHARGE_COUNTER property and olpc_battery support for it
power_supply: bump EC version check that we refuse to run with in olpc_battery
power_supply: cleanup of the OLPC battery driver
power_supply: add eeprom dump file to olpc_battery's sysfs
power_supply: Support serial number in olpc_battery
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (28 commits)
mm/hugetlb.c must #include <asm/io.h>
video: Fix up hp6xx driver build regressions.
sh: defconfig updates.
sh: Kill off stray mach-rsk7203 reference.
serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression.
sh: Move out individual boards without mach groups.
sh: Make sure AT_SYSINFO_EHDR is exposed to userspace in asm/auxvec.h.
sh: Allow SH-3 and SH-5 to use common headers.
sh: Provide common CPU headers, prune the SH-2 and SH-2A directories.
sh/maple: clean maple bus code
sh: More header path fixups for mach dir refactoring.
sh: Move out the solution engine headers to arch/sh/include/mach-se/
sh: I2C fix for AP325RXA and Migo-R
sh: Shuffle the board directories in to mach groups.
sh: dma-sh: Fix up dreamcast dma.h mach path.
sh: Switch KBUILD_DEFCONFIG to shx3_defconfig.
sh: Add ARCH_DEFCONFIG entries for sh and sh64.
sh: Fix compile error of Solution Engine
sh: Proper __put_user_asm() size mismatch fix.
sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation.
...
Linus Torvalds [Fri, 1 Aug 2008 17:27:10 +0000 (10:27 -0700)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] qeth: avoid use of include/asm-s390
[S390] dont use kthread for smp_rescan_cpus().
[S390] virtio console: fix section mismatch warning.
[S390] cio: Include linux/string.h in schid.h.
[S390] qdio: fix section mismatch bug.
[S390] stp: fix section mismatch warning.
[S390] Remove diag 0x260 call from memory detection.
[S390] qdio: make sure qdr is aligned to page size
[S390] Add support for memory hot-remove.
[S390] Wire up new syscalls.
[S390] cio: Memory allocation for idset changed.
[S390] qeth: preallocated qeth header for hiper socket
[S390] Optimize storage key operations for anon pages
[S390] nohz/sclp: disable timer on synchronous waits.
[S390] ipl: Reboot from alternate device does not work when booting from file
[S390] dasd: Add support for enhanced VM UID
[S390] Remove last P390 trace.
Tony Luck [Fri, 1 Aug 2008 17:13:32 +0000 (10:13 -0700)]
[IA64] Move include/asm-ia64 to arch/ia64/include/asm
After moving the the include files there were a few clean-ups:
1) Some files used #include <asm-ia64/xyz.h>, changed to <asm/xyz.h>
2) Some comments alerted maintainers to look at various header files to
make matching updates if certain code were to be changed. Updated these
comments to use the new include paths.
3) Some header files mentioned their own names in initial comments. Just
deleted these self references.
Pierre Ossman [Mon, 28 Jul 2008 23:05:22 +0000 (01:05 +0200)]
mmc_test: Revert "mmc_test: test oversized sg lists"
This reverts commit 48b5352ea1891455eb8e824cf7d92f66931a090f. Oversized
sg lists are not allowed anymore, and the core even checks for them in
debug mode, so this test is entirely incorrect.
[PATCH] Fix the bug of using AUDIT_STATUS_RATE_LIMIT when set fail, no error output.
When the "status_get->mask" is "AUDIT_STATUS_RATE_LIMIT || AUDIT_STATUS_BACKLOG_LIMIT".
If "audit_set_rate_limit" fails and "audit_set_backlog_limit" succeeds, the "err" value
will be greater than or equal to 0. It will miss the failure of rate set.
Signed-off-by: Zhang Xiliang <zhangxiliang@cn.fujitsu.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
zhangxiliang [Fri, 1 Aug 2008 11:15:47 +0000 (19:15 +0800)]
[PATCH] Fix the kernel panic of audit_filter_task when key field is set
When calling audit_filter_task(), it calls audit_filter_rules() with audit_context is NULL.
If the key field is set, the result in audit_filter_rules() will be set to 1 and
ctx->filterkey will be set to key.
But the ctx is NULL in this condition, so kernel will panic.
Signed-off-by: Zhang Xiliang <zhangxiliang@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
zhangxiliang [Fri, 1 Aug 2008 01:47:01 +0000 (09:47 +0800)]
Re: [PATCH] the loginuid field should be output in all AUDIT_CONFIG_CHANGE audit messages
> shouldn't these be using the "audit_get_loginuid(current)" and if we
> are going to output loginuid we also should be outputting sessionid
Thanks for your detailed explanation.
I have made a new patch for outputing "loginuid" and "sessionid" by audit_get_loginuid(current) and audit_get_sessionid(current).
If there are some deficiencies, please give me your indication.
Signed-off-by: Zhang Xiliang <zhangxiliang@cn.fujitsu.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kernel/audit.c control character detection is off-by-one
Hello,
According to my understanding there is an off-by-one bug in the
function:
audit_string_contains_control()
in:
kernel/audit.c
Patch is included.
I do not know from how many places the function is called from, but for
example, SELinux Access Vector Cache tries to log untrusted filenames via
call path:
If audit_string_contains_control() detects control characters, then the
string is hex-encoded. But the hex=0x7f dec=127, DEL-character, is not
detected.
I guess this could have at least some minor security implications, since a
user can create a filename with 0x7f in it, causing logged filename to
possibly look different when someone reads it on the terminal.
Signed-off-by: Vesa-Matti Kari <vmkari@cc.helsinki.fi> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Eric Paris [Mon, 7 Jul 2008 14:49:45 +0000 (10:49 -0400)]
[PATCH] Audit: Collect signal info when SIGUSR2 is sent to auditd
Makes the kernel audit subsystem collect information about the sending
process when that process sends SIGUSR2 to the userspace audit daemon.
SIGUSR2 is a new interesting signal to auditd telling auditd that it
should try to start logging to disk again and the error condition which
caused it to stop logging to disk (usually out of space) has been
rectified.
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 1 Aug 2008 08:29:18 +0000 (04:29 -0400)]
[PATCH] fix races and leaks in vfs_quota_on() users
* new helper: vfs_quota_on_path(); equivalent of vfs_quota_on() sans the
pathname resolution.
* callers of vfs_quota_on() that do their own pathname resolution and
checks based on it are switched to vfs_quota_on_path(); that way we
avoid the races.
* reiserfs leaked dentry/vfsmount references on several failure exits.
Stephen Smalley [Mon, 28 Jul 2008 17:32:38 +0000 (13:32 -0400)]
Re: BUG at security/selinux/avc.c:883 (was: Re: linux-next: Tree
for July 17: early crash on x86-64)
SELinux needs MAY_APPEND to be passed down to the security hook.
Otherwise, we get permission denials when only append permission is
granted by policy even if the opening process specified O_APPEND.
Shows up as a regression in the ltp selinux testsuite, fixed by
this patch.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Heiko Carstens [Fri, 1 Aug 2008 14:39:23 +0000 (16:39 +0200)]
[S390] dont use kthread for smp_rescan_cpus().
Since git commit 3da1c84c00c7e5fa8348336bd8c342f9128b0f14
"workqueues: make get_online_cpus() useable for work->func()"
it is safe to call get_online_cpus() from workqueue context.
So remove the kthread workaround again.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
WARNING: vmlinux.o(.text+0x2e1cc4): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:early_put_chars()
The function s390_virtio_console_init() references
the function __init early_put_chars().
This is often because s390_virtio_console_init lacks a __init
annotation or the annotation of early_put_chars is wrong.
WARNING: vmlinux.o(.text+0x2e1cd0): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:virtio_cons_early_init()
The function s390_virtio_console_init() references
the function __init virtio_cons_early_init().
This is often because s390_virtio_console_init lacks a __init
annotation or the annotation of virtio_cons_early_init is wrong.
Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 1 Aug 2008 14:39:20 +0000 (16:39 +0200)]
[S390] qdio: fix section mismatch bug.
Fix the two section mismatch warnings below.
This fixes two real bugs since the code which has __exit annotations
may already be gone when it is called.
WARNING: vmlinux.o(.init.text+0x1cc4a): Section mismatch in reference from the function init_QDIO() to the function .exit.text:qdio_setup_exit()
The function __init init_QDIO() references
a function __exit qdio_setup_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
qdio_setup_exit() so it may be used outside an exit section.
WARNING: vmlinux.o(.init.text+0x1cc7a): Section mismatch in reference from the function init_QDIO() to the function .exit.text:qdio_remove_perf_stats()
The function __init init_QDIO() references
a function __exit qdio_remove_perf_stats().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
qdio_remove_perf_stats() so it may be used outside an exit section.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 1 Aug 2008 14:39:19 +0000 (16:39 +0200)]
[S390] stp: fix section mismatch warning.
Fix these two (false positive) warnings by adding an __init annoation:
WARNING: vmlinux.o(.text+0x7e6a): Section mismatch in reference from the function stp_reset() to the function .init.text:__alloc_bootmem()
The function stp_reset() references
the function __init __alloc_bootmem().
This is often because stp_reset lacks a __init
annotation or the annotation of __alloc_bootmem is wrong.
WARNING: vmlinux.o(.text+0x7ece): Section mismatch in reference from the function stp_reset() to the function .init.text:free_bootmem()
The function stp_reset() references
the function __init free_bootmem().
This is often because stp_reset lacks a __init
annotation or the annotation of free_bootmem is wrong.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
projects / linux-2.6-omap-h63xx.git / log