Jeremy Kerr [Tue, 11 Mar 2008 01:46:18 +0000 (12:46 +1100)]
[POWERPC] spufs: fix rescheduling of non-runnable contexts
At present, we can hit the BUG_ON in __spu_update_sched_info by reading
the regs file of a context between two calls to spu_run. The
spu_release_saved called by spufs_regs_read() is resulting in the (now
non-runnable) context being placed back on the run queue, so the next
call to spu_run ends up in the bug condition.
This change uses the SPU_SCHED_SPU_RUN flag to only reschedule a context
if it's still in spu_run().
Ionut Nicu [Fri, 7 Mar 2008 17:27:59 +0000 (19:27 +0200)]
[POWERPC] QE: Make qe_get_firmware_info reentrant
The function was returning NULL the second time it was
called if the firmware was uploaded from the boot loader
or the first time it was called if the firmware was
uploaded from the kernel.
Signed-off-by: Ionut Nicu <ionut.nicu@freescale.com> Acked-By: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Andy Fleming [Fri, 7 Mar 2008 23:59:03 +0000 (17:59 -0600)]
[POWERPC] 83xx: Make 83xx perfmon support selectable
Not all e300 cores support the performance monitors, and the ones
that don't will be confused by the mf/mtpmr instructions. This
allows the support to be optional, so the 8349 can turn it off
while the 8379 can turn it on. Sadly, those aren't config options,
so it will be left to the defconfigs and the users to make that
determination.
Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
The following patch allows interrupts to occur on the
sbc8548. Currently PCI and PCI-X devices get assigned an IRQ
but the interrupt count never increases. This solves the
problem and adds PCI support as well.
Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Vitaly Bordug [Thu, 6 Mar 2008 10:53:30 +0000 (13:53 +0300)]
[POWERPC] 8xx: fix swap
This makes swap routines operate correctly on the ppc_8xx based machines.
Code has been revalidated on mpc885ads (8M sdram) with recent kernel. Based
on patch from Yuri Tikhonov <yur@emcraft.com> to do the same on arch/ppc
instance.
Recent kernel's size makes swap feature very important on low-memory platforms,
those are actually non-operable without it.
Linus Torvalds [Fri, 7 Mar 2008 03:32:05 +0000 (19:32 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
[Blackfin] arch: current_l1_stack_save is a pointer, so use NULL rather than 0
[Blackfin] arch: fix atomic and32/xor32 comments and ENDPROC markings
[Blackfin] arch: fix bug - allow SDH driver to be used as module
[Blackfin] arch: to kill syscalls missing warning by adding new timerfd syscalls
Linus Torvalds [Fri, 7 Mar 2008 03:31:34 +0000 (19:31 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] kprobes arch consolidation build fix
[IA64] update efi region debugging to use MB, GB and TB as well as KB
[IA64] use dev_printk in video quirk
[IA64] remove remaining __FUNCTION__ occurrences
[IA64] remove unnecessary nfs includes from sys_ia32.c
[IA64] remove CONFIG_SMP ifdef in ia64_send_ipi()
[IA64] arch_ptrace() cleanup
[IA64] remove duplicate code from arch_ptrace()
[IA64] convert sys_ptrace to arch_ptrace
[IA64] remove find_thread_for_addr()
[IA64] do not sync RBS when changing PT_AR_BSP or PT_CFM
[IA64] access user RBS directly
Harvey Harrison [Thu, 6 Mar 2008 17:49:01 +0000 (09:49 -0800)]
[IA64] kprobes arch consolidation build fix
ia64 named their handler kprobes_fault_handler while all other
arches used kprobe_fault_handler. Change the function definition
and header declaration.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
Simon Horman [Tue, 26 Feb 2008 06:24:04 +0000 (15:24 +0900)]
[IA64] update efi region debugging to use MB, GB and TB as well as KB
When EFI_DEBUG is defined to a non-zero value in arch/ia64/kernel/efi.c,
the efi memory regions are displayed. This patch enhances the
display code in a few ways:
1. Use TB, GB and MB as well as KB as units.
Although this introduces rounding errors (KB doesn't as
size is always a multiple of 4Kb), it does make
things a lot more readable.
Also as the range is also shown, it is possible to note the exact size
if it is important. In my experience, the size field is mostly useful
for getting a general idea of the size of a region.
On the rx2620 that I use, there actually is an 8TB region (though not
backed by physical memory, and 8TB really is a lot more readable than
8589934592KB.
2. pad the size field with leading spaces to further improve readability
...
... ( 8MB)
... ( 928MB)
... ( 3MB)
...
vs
...
... (8MB)
... (928MB)
... (3MB)
...
3. Pad the attr field out to 64bits using leading zeros,
to further improve readability.
Harvey Harrison [Tue, 4 Mar 2008 23:15:00 +0000 (15:15 -0800)]
[IA64] remove remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Long lines have been kept where they exist, some small spacing changes
have been done.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
KOSAKI Motohiro [Tue, 4 Mar 2008 23:45:42 +0000 (15:45 -0800)]
[IA64] remove unnecessary nfs includes from sys_ia32.c
Compilation of 2.6.25-rc2-mm1 on ia64 generates many warnings.
IA64 support 2 ELF format (IA64 binary and IA32 binary),
thus if 2 elf related header included, cause many warning or error.
about 2 week ago, J. Bruce Fields proposed this problem fixed patch.
(http://marc.info/?l=linux-ia64&m=120329313305695&w=2)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
However, it was redundantly listed in asm-mn10300/Kbuild and
asm-x86/Kbuild too. Remove those as well, so it really stops being
exported on those architectures. Also remove the redundant listing of
ptrace.h and termios.h from mn10300.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joy Latten [Thu, 6 Mar 2008 11:28:44 +0000 (19:28 +0800)]
[CRYPTO] xcbc: Fix crash with IPsec
When using aes-xcbc-mac for authentication in IPsec,
the kernel crashes. It seems this algorithm doesn't
account for the space IPsec may make in scatterlist for authtag.
Thus when crypto_xcbc_digest_update2() gets called,
nbytes may be less than sg[i].length.
Since nbytes is an unsigned number, it wraps
at the end of the loop allowing us to go back
into loop and causing crash in memcpy.
I used update function in digest.c to model this fix.
Please let me know if it looks ok.
Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The XTS blockmode uses a copy of the IV which is saved on the stack
and may or may not be properly aligned. If it is not, it will break
hardware cipher like the geode or padlock.
This patch encrypts the IV in place so we don't have to worry about
alignment.
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Tested-by: Stefan Hellermann <stefan@the2masters.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Paul Mundt [Thu, 6 Mar 2008 07:08:00 +0000 (16:08 +0900)]
sh: Fix up SH7710 VoIP-GW build.
The only board-specific bits that existed here were for setting up the
IRQs, which are now handled by the SH7710 CPU support code instead. As
there's nothing else to do for setup, kill off the board support code
and have the defconfig use the generic machvec instead.
David Chinner [Thu, 6 Mar 2008 02:49:43 +0000 (13:49 +1100)]
[XFS] fix inode leak in xfs_iget_core()
If the radix_tree_preload() fails, we need to destroy the inode we just
read in before trying again. This could leak xfs_vnode structures when
there is memory pressure. Noticed by Christoph Hellwig.
David Chinner [Thu, 6 Mar 2008 02:45:10 +0000 (13:45 +1100)]
[XFS] 977545 977545 977545 977545 977545 977545 xfsaild causing too many
wakeups
Idle state is not being detected properly by the xfsaild push code. The
current idle state is detected by an empty list which may never happen
with mostly idle filesystem or one using lazy superblock counters. A
single dirty item in the list that exists beyond the push target can
result repeated looping attempting to push up to the target because it
fails to check if the push target has been acheived or not.
Fix by considering a dirty list with everything past the target as an idle
state and set the timeout appropriately.
hitfb presently has probe using __init whilst remove uses __devexit.
As this device can't possibly be hotplugged, switch to __exit and
__exit_p() instead.
Paul Mundt [Thu, 6 Mar 2008 04:39:18 +0000 (13:39 +0900)]
fb: pvr2fb: Fix up remaining section mismatch.
Building with CONFIG_DEBUG_SECTION_MISMATCH=y reports:
CC drivers/video/pvr2fb.o
LD drivers/video/built-in.o
WARNING: drivers/video/built-in.o(.text+0xb9b0): Section mismatch in reference from the function pvr2fb_check_var() to the variable .devinit.data:pvr2_fix
The function pvr2fb_check_var() references
the variable __devinitdata pvr2_fix.
This is often because pvr2fb_check_var lacks a __devinitdata
annotation or the annotation of pvr2_fix is wrong.
This is obviously crap as no such reference exists, but it's a bit
closer to reality from older versions which blamed the PCI table. The
real problem was a reference to pvr2_var.vmode from pvr2fb_check_var(),
as pvr2_var is flagged as __devinitdata (pvr2_fix is also, so at least
that part is right).
pvr2_var.vmode is just a fancy way of saying FB_VMODE_NONINTERLACED, so
we just reference that explicitly instead.
This patch fixes the old non-verbose hp6xx apm code and enables some
very basic apm output. We now get percentage (battery) output
and basic time estimate.
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Harvey Harrison [Tue, 4 Mar 2008 23:23:47 +0000 (15:23 -0800)]
sh: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Adrian Bunk [Mon, 3 Mar 2008 18:07:42 +0000 (20:07 +0200)]
sh/mm/pg-sh7705.c must #include <linux/fs.h>
This patch fixes the following compile error:
<-- snip -->
...
CC arch/sh/mm/pg-sh7705.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/pg-sh7705.c: In function 'ptep_get_and_clear':
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/pg-sh7705.c:130: error: implicit declaration of function 'mapping_writably_mapped'
make[2]: *** [arch/sh/mm/pg-sh7705.o] Error 1
<-- snip -->
Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
David Rientjes [Wed, 5 Mar 2008 07:32:38 +0000 (23:32 -0800)]
cpusets: fix obsolete comment
mm migration is no longer done in cpuset_update_task_memory_state() so it
can no longer take current->mm->mmap_sem, so fix the obsolete comment.
[ This changed in commit 04c19fa6f16047abff2288ddbc1f0798ede5a849
("cpuset: migrate all tasks in cpuset at once") when the mm migration
was moved from cpuset_update_task_memory_state() to update_nodemask() ]
Signed-off-by: David Rientjes <rientjes@google.com> Cc: Paul Jackson <pj@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 6 Mar 2008 01:49:38 +0000 (17:49 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
NFS: use new LSM interfaces to explicitly set mount options
LSM/SELinux: Interfaces to allow FS to control mount options
Petr Tesarik [Mon, 11 Feb 2008 21:42:34 +0000 (22:42 +0100)]
[IA64] remove find_thread_for_addr()
find_thread_for_addr() is no longer needed. It was only used to find
the correct kernel RBS for a given memory address, but since the kernel
RBS is not needed any longer, this function can go away.
Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com>
Petr Tesarik [Mon, 11 Feb 2008 21:42:00 +0000 (22:42 +0100)]
[IA64] do not sync RBS when changing PT_AR_BSP or PT_CFM
Syncing is no longer needed, because user RBS is already
up-to-date. Actually, if a debugger modified the contents
of the original RBS prior to changing PT_AR_BSP, the
modifications would get overwritten.
Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com>
Petr Tesarik [Mon, 11 Feb 2008 21:41:18 +0000 (22:41 +0100)]
[IA64] access user RBS directly
Because the user RBS of a process is now completely stored in
user-mode when the process is ptrace-stopped, accesses to the
RBS should no longer augment any part of the kernel RBS.
This means we can get rid of most ia64_peek() and ia64_poke()
calls.
Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com>
Eric Paris [Wed, 5 Mar 2008 19:20:18 +0000 (14:20 -0500)]
NFS: use new LSM interfaces to explicitly set mount options
NFS and SELinux worked together previously because SELinux had NFS
specific knowledge built in. This design was approved by both groups
back in 2004 but the recent NFS changes to use nfs_parsed_mount_data and
the usage of nfs_clone_mount_data showed this to be a poor fragile
solution. This patch fixes the NFS functionality regression by making
use of the new LSM interfaces to allow an FS to explicitly set its own
mount options.
The explicit setting of mount options is done in the nfs get_sb
functions which are called before the generic vfs hooks try to set mount
options for filesystems which use text mount data.
This does not currently support NFSv4 as that functionality did not
exist in previous kernels and thus there is no regression. I will be
adding the needed code, which I believe to be the exact same as the v3
code, in nfs4_get_sb for 2.6.26.
Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: James Morris <jmorris@namei.org>
Eric Paris [Wed, 5 Mar 2008 15:31:54 +0000 (10:31 -0500)]
LSM/SELinux: Interfaces to allow FS to control mount options
Introduce new LSM interfaces to allow an FS to deal with their own mount
options. This includes a new string parsing function exported from the
LSM that an FS can use to get a security data blob and a new security
data blob. This is particularly useful for an FS which uses binary
mount data, like NFS, which does not pass strings into the vfs to be
handled by the loaded LSM. Also fix a BUG() in both SELinux and SMACK
when dealing with binary mount data. If the binary mount data is less
than one page the copy_page() in security_sb_copy_data() can cause an
illegal page fault and boom. Remove all NFSisms from the SELinux code
since they were broken by past NFS changes.
Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: James Morris <jmorris@namei.org>
Don't oops if NumPhys==0, instead return -ENODEV.
This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=9909
Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Acked-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Sam Ravnborg [Sun, 17 Feb 2008 12:22:52 +0000 (13:22 +0100)]
[CPUFREQ] fix section mismatch warnings
Fix the following warnings:
WARNING: vmlinux.o(.text+0xfe6711): Section mismatch in reference from the function cpufreq_unregister_driver() to the variable .cpuinit.data:cpufreq_cpu_notifier
WARNING: vmlinux.o(.text+0xfe68af): Section mismatch in reference from the function cpufreq_register_driver() to the variable .cpuinit.data:cpufreq_cpu_notifier
WARNING: vmlinux.o(.exit.text+0xc4fa): Section mismatch in reference from the function cpufreq_stats_exit() to the variable .cpuinit.data:cpufreq_stat_cpu_notifier
The warnings were casued by references to unregister_hotcpu_notifier()
from normal functions or exit functions.
This is flagged by modpost as a potential error because
it does not know that for the non HOTPLUG_CPU
scenario the unregister_hotcpu_notifier() is a nop.
Silence the warning by replacing the __initdata
annotation with a __refdata annotation.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Dave Jones [Fri, 15 Feb 2008 23:11:14 +0000 (18:11 -0500)]
[CPUFREQ] Remove debugging message from e_powersaver
We don't need to printk a message every time we transition.
Leave the code there, but ifdef'd out, as it's useful when
adding support for new processors.
Reported-by: Petr Titěra <P.Titera@century.cz> Signed-off-by: Dave Jones <davej@redhat.com>
Mike Christie [Tue, 4 Mar 2008 19:26:55 +0000 (13:26 -0600)]
[SCSI] iscsi class: regression - fix races with state manipulation and blocking/unblocking
For qla4xxx, we could be starting a session, but some error (network,
target, IO from a device that got started, etc) could cause the session
to fail and curring the block/unblock and state manipulation could race
with each other. This patch just has those operations done in the
single threaded iscsi eh work queue, so that way they are serialized.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
We are seeing EXIST errors from sysfs during device addition.
We need a start scan callout so we do not start scanning sessions
found during hba setup, before the async scsi scan code is ready.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Mike Christie [Tue, 4 Mar 2008 19:26:53 +0000 (13:26 -0600)]
[SCSI] qla4xxx: fix host reset dpc race
The host reset callout could be starting to reset the hba at the same
time the dpc thread is. This creates lots of problems because they both
want to do wierd things with the firmware and interrupts, etc.
This patch just has the host reset function fully shutdown the dpc
thread before resetting the hba.
This patch also moves the setting of the session online bit to fix
a potential race with the dpc thread and iscsi recovery thread.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Jeff Garzik [Thu, 28 Feb 2008 20:43:48 +0000 (15:43 -0500)]
ahci: work around ATI SB600 h/w quirk
This addresses the recent ATI SB600 errata, where the hardware does
not like 256-length PRD entries during FPDMA (aka NCQ).
It hurts performance on SB600, but it is more important to get a
correct patch eliminating the data corruption/lockups, and then later
on tune for performance.
We simply limit each command to a maximum of 255 sectors, on SB600.
Hongjie Yang [Wed, 5 Mar 2008 11:37:16 +0000 (12:37 +0100)]
[S390] incorrect reipl nss name.
/sys/firmware/reipl/nss/name contains the nss name when defsys or
savesys command has been executed. If the defsys or savesys command
fails the kernel_nss_name has to be cleared since a reipl on that
nss name won't be possible.
Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Wed, 5 Mar 2008 11:37:14 +0000 (12:37 +0100)]
[S390] Fix IPL from NSS.
IPL from NSS didn't work because the memory detection routine omits any
memory sections with a size lower than what MAX_ORDER defines.
This causes the detection routine to skip the first memory segment which
has a size of 1MB. Which later on will let the kernel think that there
is no memory available at all.
Since in addition the z/VM memory increment size is 1MB force MAX_ORDER
to be 9, so we can support 1MB segments.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ralph Wuerthner [Wed, 5 Mar 2008 11:37:13 +0000 (12:37 +0100)]
[S390] zcrypt: fix ap_device_list handling
In ap_device_probe() we can add the new ap device to the internal
device list only if the device probe function successfully returns.
Otherwise we might end up with an invalid device in the internal ap
device list.
Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[S390] dasd: fix reference counting in display method for proc/dasd/devices
Using the /proc/dasd/devices interface leaves the reference counter
of alias devices in an inconsistent state. A process that tries to set
such a device offline afterwards will hang.
The dasd_devices_show function returns immediately for alias devices
and this code path was missing a dasd_put_device call.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
[S390] dasd: let dasd erp matching recognize alias recovery
When a request fails that was started on an alias device then the
first recovery step is to retry it on the base device. If the
recovery request fails again with the same symptoms, the next step
should not be a simple retry, but should be a proper recovery based
on sense data, etc. To do so, the dasd recovery functions need to
recognize the alias recovery step in the erp chain by comparing
the start devices.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Wed, 5 Mar 2008 11:37:09 +0000 (12:37 +0100)]
[S390] Get rid of memcpy gcc warning workaround.
Compile smp.o with -Wno-nonnull so gcc stops warning about memcpy
being used with a null parameter. Also remove the workaround code
and use a char * cast instead of a void * cast to do computations.
Heiko Carstens [Wed, 5 Mar 2008 11:37:08 +0000 (12:37 +0100)]
[S390] idle: Fix machine check handling in idle loop.
If a machine check handling is pending when the idle loop is entered
default_idle will be left with timer ticks and virtual timer disabled.
Fix this by "calling" the idle_chain. Also a BUG_ON(!in_interrupt) in
start_hz_timer must be removed since the function now gets called from
non interrupt context as well.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pavel Roskin [Thu, 28 Feb 2008 22:11:02 +0000 (17:11 -0500)]
module: allow ndiswrapper to use GPL-only symbols
A change after 2.6.24 broke ndiswrapper by accidentally removing its
access to GPL-only symbols. Revert that change and add comments about
the reasons why ndiswrapper and driverloader are treated in a special
way.
Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jon Masters <jonathan@jonmasters.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (22 commits)
[IPCONFIG]: The kernel gets no IP from some DHCP servers
b43legacy: Fix module init message
rndis_wlan: fix broken data copy
libertas: compare the current command with response
libertas: fix sanity check on sequence number in command response
p54: fix eeprom parser length sanity checks
p54: fix EEPROM structure endianness
ssb: Add pcibios_enable_device() return value check
rc80211-pid: fix rate adjustment
[ESP]: Add select on AUTHENC
[TCP]: Improve ipv4 established hash function.
[NETPOLL]: Revert two bogus cleanups that broke netconsole.
[PPPOL2TP]: Add missing sock_put() in pppol2tp_tunnel_closeall()
Subject: [PPPOL2TP] add missing sock_put() in pppol2tp_recv_dequeue()
[BLUETOOTH]: l2cap info_timer delete fix in hci_conn_del
[NET]: Fix race in generic address resolution.
iucv: fix build error on !SMP
[TCP]: Must count fack_count also when skipping
[TUN]: Fix RTNL-locking in tun/tap driver
[SCTP]: Use proc_create to setup de->proc_fops.
...
[IPCONFIG]: The kernel gets no IP from some DHCP servers
From: Stephen Hemminger <shemminger@linux-foundation.org>
Based upon a patch by Marcel Wappler:
This patch fixes a DHCP issue of the kernel: some DHCP servers
(i.e. in the Linksys WRT54Gv5) are very strict about the contents
of the DHCPDISCOVER packet they receive from clients.
Table 5 in RFC2131 page 36 requests the fields 'ciaddr' and
'siaddr' MUST be set to '0'. These DHCP servers ignore Linux
kernel's DHCP discovery packets with these two fields set to
'255.255.255.255' (in contrast to popular DHCP clients, such as
'dhclient' or 'udhcpc'). This leads to a not booting system.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 5 Mar 2008 00:39:23 +0000 (16:39 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] fix ia64 kprobes compilation
[IA64] move gcc_intrin.h from header-y to unifdef-y
[IA64] workaround tiger ia64_sal_get_physical_id_info hang
[IA64] move defconfig to arch/ia64/configs/
[IA64] Fix irq migration in multiple vector domain
[IA64] signal(ia64_ia32): add a signal stack overflow check
[IA64] signal(ia64): add a signal stack overflow check
[IA64] CONFIG_SGI_SN2 - auto select NUMA and ACPI_NUMA
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
debugfs: fix sparse warnings
Driver core: Fix cleanup when failing device_add().
driver core: Remove dpm_sysfs_remove() from error path of device_add()
PM: fix new mutex-locking bug in the PM core
PM: Do not acquire device semaphores upfront during suspend
kobject: properly initialize ksets
sysfs: CONFIG_SYSFS_DEPRECATED fix
driver core: fix up Kconfig text for CONFIG_SYSFS_DEPRECATED
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: ftdi_sio - really enable EM1010PC
USB: remove incorrect struct class_device from the printer gadget
USB: pxa2xx_udc: fix misuse of clock enable/disable calls
USB: ftdi_sio: Workaround for broken Matrix Orbital serial port
USB: Add support for AXESSTEL MV110H CDMA modem
usb-storage: update earlier scatter-gather bug fix
USB: isp116x: fix enumeration on boot
USB: ehci: handle large bulk URBs correctly (again)
USB: spruce up the device blacklist
USB: fix comment of struct usb_interface
USB: update Kconfig entry for USB_SUSPEND
usb: Add support for the mos7820/7840-based B&B USB/RS485 converter to mos7840.c
Randy Dunlap [Tue, 4 Mar 2008 22:29:43 +0000 (14:29 -0800)]
input: add I2C to config since the driver makes several i2c*() calls
Add to help text that the Intel I2C ICH (i801) driver is also needed
for this kernel.
Add LEDS_CLASS to config since the driver makes les_classdev_*() calls:
ERROR: "led_classdev_register" [drivers/input/misc/apanel.ko] undefined!
ERROR: "__led_classdev_unregister" [drivers/input/misc/apanel.ko]
undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Josef Bacik [Tue, 4 Mar 2008 22:29:43 +0000 (14:29 -0800)]
ext3: fix mount option parsing
The "resize" option won't be noticed as it comes after the NULL option, so if
you try to mount (or in this case remount) with that option it won't be
recognized.
Signed-off-by: Josef Bacik <jbacik@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hugetlb: fix pool shrinking while in restricted cpuset
Adam Litke noticed that currently we grow the hugepage pool independent of any
cpuset the running process may be in, but when shrinking the pool, the cpuset
is checked. This leads to inconsistency when shrinking the pool in a
restricted cpuset -- an administrator may have been able to grow the pool on a
node restricted by a containing cpuset, but they cannot shrink it there.
There are two options: either prevent growing of the pool outside of the
cpuset or allow shrinking outside of the cpuset. >From previous discussions
on linux-mm, /proc/sys/vm/nr_hugepages is an administrative interface that
should not be restricted by cpusets. So allow shrinking the pool by removing
pages from nodes outside of current's cpuset.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: William Irwin <wli@holomorphy.com> Cc: Lee Schermerhorn <Lee.Schermerhonr@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Paul Jackson <pj@sgi.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adam Litke [Tue, 4 Mar 2008 22:29:38 +0000 (14:29 -0800)]
hugetlb: close a difficult to trigger reservation race
A hugetlb reservation may be inadequately backed in the event of racing
allocations and frees when utilizing surplus huge pages. Consider the
following series of events in processes A and B:
A) Allocates some surplus pages to satisfy a reservation
B) Frees some huge pages
A) A notices the extra free pages and drops hugetlb_lock to free some of
its surplus pages back to the buddy allocator.
B) Allocates some huge pages
A) Reacquires hugetlb_lock and returns from gather_surplus_huge_pages()
Avoid this by commiting the reservation after pages have been allocated but
before dropping the lock to free excess pages. For parity, release the
reservation in return_unused_surplus_pages().
This patch also corrects the cpuset_mems_nr() error path in
hugetlb_acct_memory(). If the cpuset check fails, uncommit the
reservation, but also be sure to return any surplus huge pages that may
have been allocated to back the failed reservation.
Thanks to Andy Whitcroft for discovering this.
Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
K.Tanaka [Tue, 4 Mar 2008 22:29:37 +0000 (14:29 -0800)]
md: the md RAID10 resync thread could cause a md RAID10 array deadlock
This message describes another issue about md RAID10 found by testing the
2.6.24 md RAID10 using new scsi fault injection framework.
Abstract:
When a scsi error results in disabling a disk during RAID10 recovery, the
resync threads of md RAID10 could stall.
This case, the raid array has already been broken and it may not matter. But
I think stall is not preferable. If it occurs, even shutdown or reboot will
fail because of resource busy.
The deadlock mechanism:
The r10bio_s structure has a "remaining" member to keep track of BIOs yet to
be handled when recovering. The "remaining" counter is incremented when
building a BIO in sync_request() and is decremented when finish a BIO in
end_sync_write().
If building a BIO fails for some reasons in sync_request(), the "remaining"
should be decremented if it has already been incremented. I found a case
where this decrement is forgotten. This causes a md_do_sync() deadlock
because md_do_sync() waits for md_done_sync() called by end_sync_write(), but
end_sync_write() never calls md_done_sync() because of the "remaining" counter
mismatch.
For example, this problem would be reproduced in the following case:
The resync thread keeps working, but actually it is deadlocked.
Patch:
By this patch, the remaining counter will be decremented if needed.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Tue, 4 Mar 2008 22:29:35 +0000 (14:29 -0800)]
md: fix possible raid1/raid10 deadlock on read error during resync
Thanks to K.Tanaka and the scsi fault injection framework, here is a fix for
another possible deadlock in raid1/raid10 error handing.
If a read request returns an error while a resync is happening and a resync
request is pending, the attempt to fix the error will block until the resync
progresses, and the resync will block until the read request completes. Thus
a deadlock.
This patch fixes the problem.
Cc: "K.Tanaka" <k-tanaka@ce.jp.nec.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Keld Simonsen [Tue, 4 Mar 2008 22:29:34 +0000 (14:29 -0800)]
md: don't attempt read-balancing for raid10 'far' layouts
This patch changes the disk to be read for layout "far > 1" to always be the
disk with the lowest block address.
Thus the chunks to be read will always be (for a fully functioning array) from
the first band of stripes, and the raid will then work as a raid0 consisting
of the first band of stripes.
Some advantages:
The fastest part which is the outer sectors of the disks involved will be
used. The outer blocks of a disk may be as much as 100 % faster than the
inner blocks.
Average seek time will be smaller, as seeks will always be confined to the
first part of the disks.
Mixed disks with different performance characteristics will work better, as
they will work as raid0, the sequential read rate will be number of disks
involved times the IO rate of the slowest disk.
If a disk is malfunctioning, the first disk which is working, and has the
lowest block address for the logical block will be used.
Signed-off-by: Keld Simonsen <keld@dkuug.dk> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Tue, 4 Mar 2008 22:29:33 +0000 (14:29 -0800)]
md: lock access to rdev attributes properly
When we access attributes of an rdev (component device on an md array) through
sysfs, we really need to lock the array against concurrent changes. We
currently do that when we change an attribute, but not when we read an
attribute. We need to lock when reading as well else rdev->mddev could become
NULL while we are accessing it.
So add appropriate locking (mddev_lock) to rdev_attr_show.
rdev_size_store requires some extra care as well as it needs to unlock the
mddev while scanning other mddevs for overlapping regions. We currently
assume that rdev->mddev will still be unchanged after the scan, but that
cannot be certain. So take a copy of rdev->mddev for use at the end of the
function.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Tue, 4 Mar 2008 22:29:32 +0000 (14:29 -0800)]
md: make sure a reshape is started when device switches to read-write
A resync/reshape/recovery thread will refuse to progress when the array is
marked read-only. So whenever it mark it not read-only, it is important to
wake up thread resync thread. There is one place we didn't do this.
The problem manifests if the start_ro module parameters is set, and a raid5
array that is in the middle of a reshape (restripe) is started. The array
will initially be semi-read-only (meaning it acts like it is readonly until
the first write). So the reshape will not proceed.
On the first write, the array will become read-write, but the reshape will not
be started, and there is no event which will ever restart that thread.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NeilBrown [Tue, 4 Mar 2008 22:29:31 +0000 (14:29 -0800)]
md: clean up irregularity with raid autodetect
When a raid1 array is stopped, all components currently get added to the list
for auto-detection. However we should really only add components that were
found by autodetection in the first place. So add a flag to record that
information, and use it.
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6-omap-h63xx.git / log