Oleg Drokin [Sat, 25 Mar 2006 11:07:02 +0000 (03:07 -0800)]
[PATCH] Add lookup_instantiate_filp usage warning
I think it would be nice to put an usage warning in header of
lookup_instantiate_filp() to indicate it is unsafe to use it on anything
but regular files (even that is potentially unsafe, but there your ->open()
is usually in your hands anyway), so that others won't fall into the same
trap I did.
Oleg Drokin [Sat, 25 Mar 2006 11:07:01 +0000 (03:07 -0800)]
[PATCH] Introduce FMODE_EXEC file flag
Introduce FMODE_EXEC file flag, to indicate that file is being opened for
execution. This is useful for distributed filesystems to maintain
consistent behavior for returning ETXTBUSY when opening for write and
execution happens on different nodes.
akpm:
Needed by Lustre at present. I assume their objective to to work towards
being able to install Lustre on an unmodified distro kernel, which seems
sane. It should have zero runtime cost.
Trond and Chuck indicate that NFS4 can probably use this too, for the same
thing.
Steven says it's also on the GFS todo list.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Chuck Lever <cel@citi.umich.edu> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Mahoney [Sat, 25 Mar 2006 11:07:00 +0000 (03:07 -0800)]
[PATCH] reiserfs: reiserfs_file_write() will lose error code when a 0-length write occurs w/ O_SYNC
When an error occurs in reiserfs_file_write before any data is written, and
O_SYNC is set, the return code of generic_osync_write will overwrite the
error code, losing it.
This patch ensures that generic_osync_inode() doesn't run under an error
condition, losing the error. This duplicates the logic from
generic_file_buffered_write().
Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Alexander Zarochentsev <zam@namesys.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reiserfs does not handle transaction ID overflow correctly. Transaction ID
== 0 causes reiserfs to crash. The patch fixes all places where the
transaction ID is incremented.
Signed-off-by: Alexander Zarochentsev <zam@namesys.com> Signed-off-by: Hans Reiser <reiser@namesys.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes a bug in reiserfs truncate. A transaction might overflow
when truncating long highly fragmented file. The fix is to split
truncation into several transactions to avoid overflowing.
Signed-off-by: Vladimir V. Saveliev <vs@namesys.com>
Cc; Charles McColgan <cm@chuck.net> Cc: Alexander Zarochentsev <zam@namesys.com> Cc: Hans Reiser <reiser@namesys.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Oleg Drokin [Sat, 25 Mar 2006 11:06:54 +0000 (03:06 -0800)]
[PATCH] Missed error checking for intent's filp in open_namei().
It seems there is error check missing in open_namei for errors returned
through intent.open.file (from lookup_instantiate_filp).
If there is plain open performed, then such a check done inside
__path_lookup_intent_open called from path_lookup_open(), but when the open
is performed with O_CREAT flag set, then __path_lookup_intent_open is only
called with LOOKUP_PARENT set where no file opening can occur yet.
Later on lookup_hash is called where exact opening might take place and
intent.open.file may be filled. If it is filled with error value of some
sort, then we get kernel attempting to dereference this error value as
address (and corresponding oops) in nameidata_to_filp() called from
filp_open().
While this is relatively simple to workaround in ->lookup() method by just
checking lookup_instantiate_filp() return value and returning error as
needed, this is not so easy in ->d_revalidate(), where we can only return
"yes, dentry is valid" or "no, dentry is invalid, perform full lookup
again", and just returning 0 on error would cause extra lookup (with
potential extra costly RPCs).
So in short, I believe that there should be no difference in error handling
for opening a file and creating a file in open_namei() and propose this
simple patch as a solution.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Sat, 25 Mar 2006 11:06:53 +0000 (03:06 -0800)]
[PATCH] jbd: embed j_commit_timer in journal struct
The kjournald timer is currently on the kernel thread's stack and the journal
structure points at it. Save a pointer hop by moving the timer into the
journal structure.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Howells [Sat, 25 Mar 2006 11:06:52 +0000 (03:06 -0800)]
[PATCH] Keys: Replace duplicate non-updateable keys rather than failing
Cause an attempt to add a duplicate non-updateable key (such as a keyring) to
a keyring to discard the extant copy in favour of the new one rather than
failing with EEXIST:
# do the test in an empty session
keyctl session
# create a new keyring called "a" and attach to session
keyctl newring a @s
# create another new keyring called "a" and attach to session,
# displacing the keyring added by the second command:
keyctl newring a @s
Without this patch, the third command will fail.
For updateable keys (such as those of "user" type), the update method will
still be called rather than a new key being created.
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Chen, Kenneth W [Sat, 25 Mar 2006 11:06:50 +0000 (03:06 -0800)]
[PATCH] x86: HUGETLBFS and DEBUG_PAGEALLOC are incompatible
DEBUG_PAGEALLOC is not compatible with hugetlb page support. That debug
option turns off PSE. Once it is turned off in CR4, the cpu will ignore
pse bit in the pmd and causing infinite page-not- present faults.
So disable DEBUG_PAGEALLOC if the user selected hugetlbfs.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ashok Raj [Sat, 25 Mar 2006 11:06:50 +0000 (03:06 -0800)]
[PATCH] x86: make CONFIG_HOTPLUG_CPU depend on !X86_PC
Make CONFIG_HOTPLUG_CPU depend on !X86_PC, so we need to turn on either
CONFIG_GENERICARCH, CONFIG_BIGSMP or any other subarch except X86_PC when
CONFIG_HOTPLUG_CPU=y
With 2.6.15+ kernels when CONFIG_HOTPLUG_CPU is turned on we switch to
bigsmp mode for sending IPI's and ioapic configurations that caused the
following error message.
>> More than 8 CPUs detected and CONFIG_X86_PC cannot handle it.
>> Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.
Originally bigsmp was added just to handle >8 cpus, but now with hotplug
cpu support we need to use bigsmp mode (why? see below), that cause the
above error message even if there were less than 8 cpus in the system.
The message is bogus, but we are cannot use logical flat mode due to issues
with broadcast IPI can confuse a CPU just comming up. We use flat physical
mode just like x86_64 case. More details on why bigsmp now uses flat
physical mode (vs. cluster mode) in following link.
We have had this memory leak for a while now. The situation is complicated
by the use of alloc_kmemlist() as a function to resize various caches by
do_tune_cpucache().
What we do here is first of all make sure that we deallocate properly in
the loop over all the nodes.
If we are just resizing caches then we can simply return with -ENOMEM if an
allocation fails.
If the cache is new then we need to rollback and remove all earlier
allocations.
We detect that a cache is new by checking if the link to the global cache
chain has been setup. This is a bit hackish ....
(also fix up too overlong lines that I added in the last patch...)
Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] slab: Bypass free lists for __drain_alien_cache()
__drain_alien_cache() currently drains objects by freeing them to the
(remote) freelists of the original node. However, each node also has a
shared list containing objects to be used on any processor of that node.
We can avoid a number of remote node accesses by copying the pointers to
the free objects directly into the remote shared array.
And while we are at it: Skip alien draining if the alien cache spinlock is
already taken.
Kiran reported that this is a performance benefit.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
slabr_objects() can be used to transfer objects between various object
caches of the slab allocator. It is currently only used during
__cache_alloc() to retrieve elements from the shared array. We will be
using it soon to transfer elements from the alien caches to the remote
shared array.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
As suggested by Eric Dumazet, optimize kzalloc() calls that pass a
compile-time constant size. Please note that the patch increases kernel
text slightly (~200 bytes for defconfig on x86).
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Introduce a memory-zeroing variant of kmem_cache_alloc. The allocator
already exits in XFS and there are potential users for it so this patch
makes the allocator available for the general public.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Howells [Sat, 25 Mar 2006 11:06:36 +0000 (03:06 -0800)]
[PATCH] Optimise d_find_alias()
The attached patch optimises d_find_alias() to only take the spinlock if
there's anything in the the inode's alias list. If there isn't, it returns
NULL immediately.
With respect to the superblock sharing patch, this should reduce by one the
number of times the dcache_lock is taken by nfs_lookup() for ordinary
directory lookups.
Only in the case where there's already a dentry for particular directory inode
(such as might happen when another mountpoint is rooted at that dentry) will
the lock then be taken the extra time.
Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Thomas Gleixner [Sat, 25 Mar 2006 11:06:35 +0000 (03:06 -0800)]
[PATCH] Validate and sanitze itimer timeval from userspace
According to the specification the timevals must be validated and an
errorcode -EINVAL returned in case the timevals are not in canonical form.
This check was never done in Linux.
The pre 2.6.16 code converted invalid timevals silently. Negative timeouts
were converted by the timeval_to_jiffies conversion to the maximum timeout.
hrtimers and the ktime_t operations expect timevals in canonical form.
Otherwise random results might happen on 32 bits machines due to the
optimized ktime_add/sub operations. Negative timeouts are treated as
already expired. This might break applications which work on pre 2.6.16.
To prevent random behaviour and API breakage the timevals are checked and
invalid timevals sanitized in a simliar way as the pre 2.6.16 code did.
Invalid timevals are reported with a per boot limited number of kernel
messages so applications which use this misfeature can be corrected.
After a grace period of one year the sanitizing should be replaced by a
correct validation check. This is also documented in
Documentation/feature-removal-schedule.txt
The validation and sanitizing is done inside do_setitimer so all callers
(sys_setitimer, compat_sys_setitimer, osf_setitimer) are catched.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Thomas Gleixner [Sat, 25 Mar 2006 11:06:33 +0000 (03:06 -0800)]
[PATCH] sys_alarm() unsigned signed conversion fixup
alarm() calls the kernel with an unsigend int timeout in seconds. The
value is stored in the tv_sec field of a struct timeval to setup the
itimer. The tv_sec field of struct timeval is of type long, which causes
the tv_sec value to be negative on 32 bit machines if seconds > INT_MAX.
Before the hrtimer merge (pre 2.6.16) such a negative value was converted
to the maximum jiffies timeout by the timeval_to_jiffies conversion. It's
not clear whether this was intended or just happened to be done by the
timeval_to_jiffies code.
hrtimers expect a timeval in canonical form and treat a negative timeout as
already expired. This breaks the legitimate usage of alarm() with a
timeout value > INT_MAX seconds.
For 32 bit machines it is therefor necessary to limit the internal seconds
value to avoid API breakage. Instead of doing this in all implementations
of sys_alarm the duplicated sys_alarm code is moved into a common function
in itimer.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Sat, 25 Mar 2006 11:06:32 +0000 (03:06 -0800)]
[PATCH] timer irq driven soft watchdog fix
I seem to have lost this hunk in yesterday's patch. It brings the
coming-online CPU's softlockup timer up to date so we don't get false-positive
tripups during CPU hot-add.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Horms [Thu, 23 Mar 2006 07:36:28 +0000 (16:36 +0900)]
[PATCH] net: ne2k.c won't compile if pci_clone_list is const
net: ne2k.c won't compile if pci_clone_list is const
f71e130966ba429dbd24be08ddbcdf263df9a5ad which (amongst other things)
made pci_clone_list in ne2k-pci.c const causes the following compile error.
This patch reverses that portion of that changeset
drivers/net/ne2k-pci.c:123: error: pci_clone_list causes a section type
conflict
Andrew Victor [Fri, 24 Mar 2006 09:50:17 +0000 (11:50 +0200)]
[PATCH] AT91RM9200 Ethernet driver
This patch adds support for the Ethernet controller integrated in the
Atmel AT91RM9200 SoC processor.
Changes since the previous submission (01/02/2006) are:
- Make use of the clk.h clock infrastructure.
- The multicast hash function is not crc32. [Patch by Pedro Perez]
Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Linus Torvalds [Fri, 24 Mar 2006 16:19:51 +0000 (08:19 -0800)]
Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
[PATCH] libata: Remove dependence on host_set->dev for SAS
[PATCH] libata: ata_scsi_ioctl cleanup
[PATCH] libata: ata_scsi_queuecmd cleanup
[libata] export ata_dev_pair; trim trailing whitespace
[PATCH] libata: add ata_dev_pair helper
[PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE.
[PATCH] libata: make ata_set_mode() responsible for failure handling
[PATCH] libata: use ata_dev_disable() in ata_bus_probe()
[PATCH] libata: implement ata_dev_disable()
[PATCH] libata: check if port is disabled after internal command
[PATCH] libata: make per-dev transfer mode limits per-dev
[PATCH] libata: add per-dev pio/mwdma/udma_mask
[PATCH] libata: implement ata_unpack_xfermask()
[libata] Move some bmdma-specific code to libata-bmdma.c
[libata sata_uli] kill scr_addr abuse
[libata sata_nv] eliminate duplicate codepaths with iomap
[libata sata_nv] cleanups: convert #defines to enums; remove in-file history
[libata sata_sil24] cleanups: use pci_iomap(), kzalloc()
Davi Arnaut [Fri, 24 Mar 2006 11:18:43 +0000 (03:18 -0800)]
[PATCH] strndup_user: convert keyctl
Copies user-space string with strndup_user() and moves the type string
duplication code to a function (thus fixing a wrong check on the length of the
type.)
Signed-off-by: Davi Arnaut <davi.arnaut@gmail.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Davi Arnaut [Fri, 24 Mar 2006 11:18:42 +0000 (03:18 -0800)]
[PATCH] strndup_user()
This patch series creates a strndup_user() function to easy copying C strings
from userspace. Also we avoid common pitfalls like userspace modifying the
final \0 after the strlen_user().
Signed-off-by: Davi Arnaut <davi.arnaut@gmail.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ingo Molnar [Fri, 24 Mar 2006 11:18:41 +0000 (03:18 -0800)]
[PATCH] timer-irq-driven soft-watchdog, cleanups
Make the softlockup detector purely timer-interrupt driven, removing
softirq-context (timer) dependencies. This means that if the softlockup
watchdog triggers, it has truly observed a longer than 10 seconds
scheduling delay of a SCHED_FIFO prio 99 task.
(the patch also turns off the softlockup detector during the initial bootup
phase and does small style fixes)
Sergey Vlasov [Fri, 24 Mar 2006 11:18:38 +0000 (03:18 -0800)]
[PATCH] Fix module refcount leak in __set_personality()
If the change of personality does not lead to change of exec domain,
__set_personality() returned without releasing the module reference
acquired by lookup_exec_domain().
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] ext3: Properly report backup block present in a group
In filesystems with the meta block group flag on, ext3_bg_num_gdb() fails
to report the correct number of blocks used to store the group descriptor
backups in a given group. It happens because meta_bg follows a different
logic from the original ext3 backup placement in groups multiples of 3, 5
and 7.
Signed-off-by: Glauber de Oliveira Costa <glommer@br.ibm.com> Cc: Andreas Dilger <adilger@clusterfs.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: Alex Tomas <alex@clusterfs.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Fri, 24 Mar 2006 11:18:35 +0000 (03:18 -0800)]
[PATCH] RLIMIT_CPU: fix handling of a zero limit
At present the kernel doesn't honour an attempt to set RLIMIT_CPU to zero
seconds. But the spec says it should, and that's what 2.4.x does.
Fixing this for real would involve some complexity (such as adding a new
it-has-been-set flag to the task_struct, and testing that everwhere, instead
of overloading the value of it_prof_expires).
Given that a 2.4 kernel won't actually send the signal until one second has
expired anyway, let's just handle this case by treating the caller's
zero-seconds as one second.
Andrew Morton [Fri, 24 Mar 2006 11:18:34 +0000 (03:18 -0800)]
[PATCH] sys_setrlimit() cleanup
- Whitespace cleanups
- Make that expression comprehensible.
There's a potential logic change here: we do the "is it_prof_expires equal to
zero" test after converting it to seconds, rather than doing the comparison
between raw cputime_t's.
But given that it's in units of seconds anyway, that shouldn't change
anything.
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Cox [Fri, 24 Mar 2006 11:18:32 +0000 (03:18 -0800)]
[PATCH] Yet more rio cleaning (2 of 2)
- Remove more unused headers
- Remove various typedefs
- Correct type of PaddrP (physical addresses should be ulong)
- Kill use of bcopy
- More printk cleanups
- Kill true/false
- Clean up direct access to pci BARs
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Cox [Fri, 24 Mar 2006 11:18:31 +0000 (03:18 -0800)]
[PATCH] Yet more rio cleaning (1 of 2)
- Remove more unused headers
- Remove various typedefs
- Correct type of PaddrP (physical addresses should be ulong)
- Kill use of bcopy
- More printk cleanups
- Kill true/false
- Clean up direct access to pci BARs
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Cox [Fri, 24 Mar 2006 11:18:29 +0000 (03:18 -0800)]
[PATCH] rio driver rework continued #4
Third large chunk of code cleanup. The split between this and #3 and #4 is
fairly arbitary and due to the message length limit on the list. These
patches continue the process of ripping out macros and typedefs while cleaning
up lots of 32bit assumptions. Several inlines for compatibility also get
removed and that causes a lot of noise.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Cox [Fri, 24 Mar 2006 11:18:28 +0000 (03:18 -0800)]
[PATCH] rio driver rework continued #3
Second large chunk of code cleanup. The split between this and #3 and #4 is
fairly arbitary and due to the message length limit on the list. These
patches continue the process of ripping out macros and typedefs while cleaning
up lots of 32bit assumptions. Several inlines for compatibility also get
removed and that causes a lot of noise.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Cox [Fri, 24 Mar 2006 11:18:27 +0000 (03:18 -0800)]
[PATCH] rio driver rework continued #2
First large chunk of code cleanup. The split between this and #3 and #4 is
fairly arbitary and due to the message length limit on the list. These
patches continue the process of ripping out macros and typedefs while cleaning
up lots of 32bit assumptions. Several inlines for compatibility also get
removed and that causes a lot of noise.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Cox [Fri, 24 Mar 2006 11:18:26 +0000 (03:18 -0800)]
[PATCH] rio driver rework continued #1
More header cleanups, strip out typedefs and remove cruft. There are a lot of
magic macros that can go and also a great deal of abuse of volatile that is
not needed any more as this patch set cleans up the misuse of pointer access
to ISA and PCI space.
It now builds cleanly on 64bit, although there is more work left to do
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Announce that the kernel_thread export will be removed in half a year,
after all it's users have been converted to the kthread_ API, which I plan
to do over the next month.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kumar Gala [Fri, 24 Mar 2006 11:18:21 +0000 (03:18 -0800)]
[PATCH] ide: Allow IDE interface to specify its not capable of 32-bit operations
In some embedded systems the IDE hardware interface may only support 16-bit
or smaller accesses. Allow the interface to specify if this is the case
and don't allow the drive or user to override the setting.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Adrian Bunk [Fri, 24 Mar 2006 11:18:21 +0000 (03:18 -0800)]
[PATCH] show MCP menu only on ARCH_SA1100
On architectures like i386, the "Multimedia Capabilities Port drivers" menu is
visible, but it can't be visited since it contains nothing usable for
!ARCH_SA1100.
This patch therefore shows this menu only on ARCH_SA1100.
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
John Z. Bohach [Fri, 24 Mar 2006 11:18:19 +0000 (03:18 -0800)]
[PATCH] console_setup() depends (wrongly?) on CONFIG_PRINTK
It appears that console_setup() code only gets compiled into the kernel if
CONFIG_PRINTK is enabled. One detrimental side-effect of this is that
serial8250_console_setup() never gets invoked when CONFIG_PRINTK is not
set, resulting in baud rate not being read/parsed from command line (i.e.
console=ttyS0,115200n8 is ignored, at least the baud rate part...)
Attached patch moves console_setup() code from inside
#ifdef CONFIG_PRINTK
to outside (in printk.c), removing dependence on said config. option.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Nico Schottelius [Fri, 24 Mar 2006 11:18:18 +0000 (03:18 -0800)]
[PATCH] Updated Documentation/nfsroot.txt
I today booted the first time my embedded device using Linux 2.6.15.2,
which was booted by pxelinux, which then bootet itself from the nfsroot.
This went pretty fine, but when I was reading through
Documentation/nfsroot.txt I saw that there are some more modern versions
available of loading the kernel and passing parameters.
Pierre Ossman [Fri, 24 Mar 2006 11:18:17 +0000 (03:18 -0800)]
[PATCH] mmc: Secure Digital Host Controller Interface driver
Driver for the Secure Digital Host Controller Interface specification.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pierre Ossman [Fri, 24 Mar 2006 11:18:16 +0000 (03:18 -0800)]
[PATCH] Secure Digital Host Controller id and regs
Class code and register definitions for the Secure Digital Host Controller
standard.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Fri, 24 Mar 2006 11:18:13 +0000 (03:18 -0800)]
[PATCH] msync(MS_SYNC): don't hold mmap_sem while syncing
It seems bad to hold mmap_sem while performing synchronous disk I/O. Alter
the msync(MS_SYNC) code so that the lock is released while we sync the file.
Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Fri, 24 Mar 2006 11:18:12 +0000 (03:18 -0800)]
[PATCH] msync(): perform dirty page levelling
It seems sensible to perform dirty page throttling in msync: as the application
dirties pages we can kick off pdflush early, or even force the msync() caller
to perform writeout, or even throttle the msync() caller.
The main effect of this is to start disk writeback earlier if we've just
discovered that a large amount of pagecache has been dirtied. (Otherwise it
wouldn't happen for up to five seconds, next time pdflush wakes up).
It also will cause the page-dirtying process to get panalised for dirtying
those pages rather than whacking someone else with the problem.
We should do this for munmap() and possibly even exit(), too.
We drop the mmap_sem while performing the dirty page balancing. It doesn't
seem right to hold mmap_sem for that long.
Note that this patch only affects MS_ASYNC. MS_SYNC will be syncing all the
dirty pages anyway.
We note that msync(MS_SYNC) does a full-file-sync inside mmap_sem, and always
has. We can fix that up...
The patch also tightens up the mmap_sem coverage in sys_msync(): no point in
taking it while we perform the incoming arg checking.
Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Fri, 24 Mar 2006 11:18:11 +0000 (03:18 -0800)]
[PATCH] set_page_dirty() return value fixes
We need set_page_dirty() to return true if it actually transitioned the page
from a clean to dirty state. This wasn't right in a couple of places. Do a
kernel-wide audit, fix things up.
This leaves open the possibility of returning a negative errno from
set_page_dirty() sometime in the future. But we don't do that at present.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Dumazet [Fri, 24 Mar 2006 11:18:10 +0000 (03:18 -0800)]
[PATCH] HOTPLUG_CPU: avoid hitting too many cachelines in recalc_bh_state()
Instead of using for_each_cpu(i), we can use for_each_online_cpu(i).
When a CPU goes offline (ie removed from online map), it might have a non
null bh_accounting.nr, so this patch adds a transfer of this counter to an
online CPU counter.
We already have a hotcpu_notifier, (function buffer_cpu_notify()), where we
can do this bh_accounting.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OPL3_HW_OPL3_PC98 #define isn't used anywhere; previously in
sound/drivers/opl3/opl3_lib.c and sound/isa/cs423x/pc98.c, the latter of which
went away with the rest of PC98 subarch.
Signed-off-by: Arthur Othieno <apgo@patchbomb.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Fri, 24 Mar 2006 11:18:06 +0000 (03:18 -0800)]
[PATCH] shmdt: check address alignment
SUSv3 says the shmdt() function shall fail with EINVAL if the value of
shmaddr is not the data segment start address of a shared memory segment:
our sys_shmdt needs to reject a shmaddr which is not page-aligned.
Does it have the potential to break existing apps?
Hugh says
"sys_shmdt() just does the wrong (unexpected) thing with a misaligned
address: it'll fail on what you might expect it to succeed on, and only
succeed on what it should definitely fail on.
"That is, I think it behaves as if shmaddr gets rounded up, when the only
understandable behaviour would be if it rounded it down.
"Which does mean you'd have to be devious to see anything but EINVAL from
a misaligned shmaddr there, so it's not terribly important."
Andrew Morton [Fri, 24 Mar 2006 11:18:04 +0000 (03:18 -0800)]
[PATCH] fadvise(): write commands
Add two new linux-specific fadvise extensions():
LINUX_FADV_ASYNC_WRITE: start async writeout of any dirty pages between file
offsets `offset' and `offset+len'. Any pages which are currently under
writeout are skipped, whether or not they are dirty.
LINUX_FADV_WRITE_WAIT: wait upon writeout of any dirty pages between file
offsets `offset' and `offset+len'.
By combining these two operations the application may do several things:
LINUX_FADV_ASYNC_WRITE: push some or all of the dirty pages at the disk.
LINUX_FADV_WRITE_WAIT, LINUX_FADV_ASYNC_WRITE: push all of the currently dirty
pages at the disk.
LINUX_FADV_WRITE_WAIT, LINUX_FADV_ASYNC_WRITE, LINUX_FADV_WRITE_WAIT: push all
of the currently dirty pages at the disk, wait until they have been written.
It should be noted that none of these operations write out the file's
metadata. So unless the application is strictly performing overwrites of
already-instantiated disk blocks, there are no guarantees here that the data
will be available after a crash.
To complete this suite of operations I guess we should have a "sync file
metadata only" operation. This gives applications access to all the building
blocks needed for all sorts of sync operations. But sync-metadata doesn't fit
well with the fadvise() interface. Probably it should be a new syscall:
sys_fmetadatasync().
The patch also diddles with the meaning of `endbyte' in sys_fadvise64_64().
It is made to represent that last affected byte in the file (ie: it is
inclusive). Generally, all these byterange and pagerange functions are
inclusive so we can easily represent EOF with -1.
As Ulrich notes, these two functions are somewhat abusive of the fadvise()
concept, which appears to be "set the future policy for this fd".
But these commands are a perfect fit with the fadvise() impementation, and
several of the existing fadvise() commands are synchronous and don't affect
future policy either. I think we can live with the slight incongruity.
Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I had trouble understanding working out whether filemap_fdatawrite_range()'s
`end' parameter describes the last-byte-to-be-written or the last-plus-one.
Clarify that in comments.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jan Beulich [Fri, 24 Mar 2006 11:16:19 +0000 (03:16 -0800)]
[PATCH] CONFIG_UNWIND_INFO
As a foundation for reliable stack unwinding, this adds a config option
(available to all architectures except IA64 and those where the module
loader might have problems with the resulting relocations) to enable the
generation of frame unwind information.
Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org>, Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alex Tomas [Fri, 24 Mar 2006 11:16:16 +0000 (03:16 -0800)]
[PATCH] fast ext3_statfs
Under I/O load it may take up to a dozen seconds to read all group
descriptors. This is what ext3_statfs() does. At the same time, we already
maintain global numbers of free inodes/blocks. Why don't we use them instead
of group reading and summing?
Cc: Ravikiran G Thirumalai <kiran@scalex86.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Fri, 24 Mar 2006 11:16:12 +0000 (03:16 -0800)]
[PATCH] cpuset: remove useless local variable initialization
Remove a useless variable initialization in cpuset __cpuset_zone_allowed().
The local variable 'allowed' is unconditionally set before use, later on
in the code, so does not need to be initialized.
Not that it seems to matter to the code generated any, as the compiler
optimizes out the superfluous assignment anyway.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Fri, 24 Mar 2006 11:16:12 +0000 (03:16 -0800)]
[PATCH] cpuset: memory_spread_slab drop useless PF_SPREAD_PAGE check
The hook in the slab cache allocation path to handle cpuset memory
spreading for tasks in cpusets with 'memory_spread_slab' enabled has a
modest performance bug. The hook calls into the memory spreading handler
alternate_node_alloc() if either of 'memory_spread_slab' or
'memory_spread_page' is enabled, even though the handler does nothing
(albeit harmlessly) for the page case
Fix - drop PF_SPREAD_PAGE from the set of flag bits that are used to
trigger a call to alternate_node_alloc().
The page case is handled by separate hooks -- see the calls conditioned on
cpuset_do_page_mem_spread() in mm/filemap.c
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Fri, 24 Mar 2006 11:16:11 +0000 (03:16 -0800)]
[PATCH] cpuset: don't need to mark cpuset_mems_generation atomic
Drop the atomic_t marking on the cpuset static global
cpuset_mems_generation. Since all access to it is guarded by the global
manage_mutex, there is no need for further serialization of this value.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Fri, 24 Mar 2006 11:16:09 +0000 (03:16 -0800)]
[PATCH] cpuset memory spread slab cache hooks
Change the kmem_cache_create calls for certain slab caches to support cpuset
memory spreading.
See the previous patches, cpuset_mem_spread, for an explanation of cpuset
memory spreading, and cpuset_mem_spread_slab_cache for the slab cache support
for memory spreading.
The slab caches marked for now are: dentry_cache, inode_cache, some xfs slab
caches, and buffer_head. This list may change over time. In particular,
other file system types that are used extensively on large NUMA systems may
want to allow for spreading their directory and inode slab cache entries.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The hooks in the slab cache allocator code path for support of NUMA
mempolicies and cpuset memory spreading are in an important code path. Many
systems will use neither feature.
This patch optimizes those hooks down to a single check of some bits in the
current tasks task_struct flags. For non NUMA systems, this hook and related
code is already ifdef'd out.
The optimization is done by using another task flag, set if the task is using
a non-default NUMA mempolicy. Taking this flag bit along with the
PF_SPREAD_PAGE and PF_SPREAD_SLAB flag bits added earlier in this 'cpuset
memory spreading' patch set, one can check for the combination of any of these
special case memory placement mechanisms with a single test of the current
tasks task_struct flags.
This patch also tightens up the code, to save a few bytes of kernel text
space, and moves some of it out of line. Due to the nested inlines called
from multiple places, we were ending up with three copies of this code, which
once we get off the main code path (for local node allocation) seems a bit
wasteful of instruction memory.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Provide the slab cache infrastructure to support cpuset memory spreading.
See the previous patches, cpuset_mem_spread, for an explanation of cpuset
memory spreading.
This patch provides a slab cache SLAB_MEM_SPREAD flag. If set in the
kmem_cache_create() call defining a slab cache, then any task marked with the
process state flag PF_MEMSPREAD will spread memory page allocations for that
cache over all the allowed nodes, instead of preferring the local (faulting)
node.
On systems not configured with CONFIG_NUMA, this results in no change to the
page allocation code path for slab caches.
On systems with cpusets configured in the kernel, but the "memory_spread"
cpuset option not enabled for the current tasks cpuset, this adds a call to a
cpuset routine and failed bit test of the processor state flag PF_SPREAD_SLAB.
For tasks so marked, a second inline test is done for the slab cache flag
SLAB_MEM_SPREAD, and if that is set and if the allocation is not
in_interrupt(), this adds a call to to a cpuset routine that computes which of
the tasks mems_allowed nodes should be preferred for this allocation.
==> This patch adds another hook into the performance critical
code path to allocating objects from the slab cache, in the
____cache_alloc() chunk, below. The next patch optimizes this
hook, reducing the impact of the combined mempolicy plus memory
spreading hooks on this critical code path to a single check
against the tasks task_struct flags word.
This patch provides the generic slab flags and logic needed to apply memory
spreading to a particular slab.
A subsequent patch will mark a few specific slab caches for this placement
policy.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Fri, 24 Mar 2006 11:16:06 +0000 (03:16 -0800)]
[PATCH] cpuset memory spread: slab cache format
Rewrap the overly long source code lines resulting from the previous
patch's addition of the slab cache flag SLAB_MEM_SPREAD. This patch
contains only formatting changes, and no function change.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD
memory spreading.
If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's
in a cpuset with the 'memory_spread_slab' option enabled goes to allocate
from such a slab cache, the allocations are spread evenly over all the
memory nodes (task->mems_allowed) allowed to that task, instead of favoring
allocation on the node local to the current cpu.
The following inode and similar caches are marked SLAB_MEM_SPREAD:
The choice of which slab caches to so mark was quite simple. I marked
those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache,
inode_cache, and buffer_head, which were marked in a previous patch. Even
though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same
potentially large file system i/o related slab caches as we need for memory
spreading.
Given that the rule now becomes "wherever you would have used a
SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use
the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain.
Future file system writers will just copy one of the existing file system
slab cache setups and tend to get it right without thinking.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Fri, 24 Mar 2006 11:16:04 +0000 (03:16 -0800)]
[PATCH] cpuset memory spread page cache implementation and hooks
Change the page cache allocation calls to support cpuset memory spreading.
See the previous patch, cpuset_mem_spread, for an explanation of cpuset memory
spreading.
On systems without cpusets configured in the kernel, this is no change.
On systems with cpusets configured in the kernel, but the "memory_spread"
cpuset option not enabled for the current tasks cpuset, this adds a call to a
cpuset routine and failed bit test of the processor state flag PF_SPREAD_PAGE.
On tasks in cpusets with "memory_spread" enabled, this adds a call to a cpuset
routine that computes which of the tasks mems_allowed nodes should be
preferred for this allocation.
If memory spreading applies to a particular allocation, then any other NUMA
mempolicy does not apply.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Fri, 24 Mar 2006 11:16:03 +0000 (03:16 -0800)]
[PATCH] cpuset memory spread basic implementation
This patch provides the implementation and cpuset interface for an alternative
memory allocation policy that can be applied to certain kinds of memory
allocations, such as the page cache (file system buffers) and some slab caches
(such as inode caches).
The policy is called "memory spreading." If enabled, it spreads out these
kinds of memory allocations over all the nodes allowed to a task, instead of
preferring to place them on the node where the task is executing.
All other kinds of allocations, including anonymous pages for a tasks stack
and data regions, are not affected by this policy choice, and continue to be
allocated preferring the node local to execution, as modified by the NUMA
mempolicy.
There are two boolean flag files per cpuset that control where the kernel
allocates pages for the file system buffers and related in kernel data
structures. They are called 'memory_spread_page' and 'memory_spread_slab'.
If the per-cpuset boolean flag file 'memory_spread_page' is set, then the
kernel will spread the file system buffers (page cache) evenly over all the
nodes that the faulting task is allowed to use, instead of preferring to put
those pages on the node where the task is running.
If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the
kernel will spread some file system related slab caches, such as for inodes
and dentries evenly over all the nodes that the faulting task is allowed to
use, instead of preferring to put those pages on the node where the task is
running.
The implementation is simple. Setting the cpuset flags 'memory_spread_page'
or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or
PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or
subsequently joins that cpuset. In subsequent patches, the page allocation
calls for the affected page cache and slab caches are modified to perform an
inline check for these flags, and if set, a call to a new routine
cpuset_mem_spread_node() returns the node to prefer for the allocation.
The cpuset_mem_spread_node() routine is also simple. It uses the value of a
per-task rotor cpuset_mem_spread_rotor to select the next node in the current
tasks mems_allowed to prefer for the allocation.
This policy can provide substantial improvements for jobs that need to place
thread local data on the corresponding node, but that need to access large
file system data sets that need to be spread across the several nodes in the
jobs cpuset in order to fit. Without this patch, especially for jobs that
might have one thread reading in the data set, the memory allocation across
the nodes in the jobs cpuset can become very uneven.
A couple of Copyright year ranges are updated as well. And a couple of email
addresses that can be found in the MAINTAINERS file are removed.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Fri, 24 Mar 2006 11:16:00 +0000 (03:16 -0800)]
[PATCH] cpuset cleanup not not operators
Since the test_bit() bit operator is boolean (return 0 or 1), the double not
"!!" operations needed to convert a scalar (zero or not zero) to a boolean are
not needed.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] cpusets: only wakeup kswapd for zones in the current cpuset
If we get under some memory pressure in a cpuset (we only scan zones that
are in the cpuset for memory) then kswapd is woken up for all zones. This
patch only wakes up kswapd in zones that are part of the current cpuset.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Acked-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul E. McKenney [Fri, 24 Mar 2006 11:15:58 +0000 (03:15 -0800)]
[PATCH] rcutorture: tag success/failure line with module parameters
A long-running rcutorture test can overflow dmesg, so that the line
containing the module parameters is lost. Although it is usually possible
to retrieve this information from the log files, it is much better to just
tag it onto the final success/failure line so that it may be easily found.
This patch does just that.
Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
include/linux/platform.h contained nothing that was actually used except
the default_idle() prototype, and is therefore removed by this patch.
This patch does the following with the platform specific default_idle()
functions on different architectures:
- remove the unused function:
- parisc
- sparc64
- make the needlessly global function static:
- arm
- h8300
- m68k
- m68knommu
- s390
- v850
- x86_64
- add a prototype in asm/system.h:
- cris
- i386
- ia64
Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Patrick Mochel <mochel@digitalimplant.org> Acked-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
projects / linux-2.6-omap-h63xx.git / log