Masami Hiramatsu [Fri, 18 Jan 2008 16:20:46 +0000 (11:20 -0500)]
[IA64] Fix the order of atomic operations in restore_previous_kprobes on ia64
Fix the order of atomic operations to prevent overwriting prev_kprobe[0].
To pop values from stack, we must decrement stack index right AFTER
reading values.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
Doug Chapman [Mon, 28 Jan 2008 23:33:28 +0000 (15:33 -0800)]
[IA64] fix userspace compile error in gcc_intrin.h
Fixes userspace build errors when linux/ipv6.h is included such as in the
dhcpv6 package under fedora. Likely causes other userspace build errors as
well. I found this in akpm's tree from 2.6.18 but could not find any case
of anyone proposing it for the main tree.
Signed-off-by: Doug Chapman <doug.chapman@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (25 commits)
virtio: balloon driver
virtio: Use PCI revision field to indicate virtio PCI ABI version
virtio: PCI device
virtio_blk: implement naming for vda-vdz,vdaa-vdzz,vdaaa-vdzzz
virtio_blk: Dont waste major numbers
virtio_blk: provide getgeo
virtio_net: parametrize the napi_weight for virtio receive queue.
virtio: free transmit skbs when notified, not on next xmit.
virtio: flush buffers on open
virtnet: remove double ether_setup
virtio: Allow virtio to be modular and used by modules
virtio: Use the sg_phys convenience function.
virtio: Put the virtio under the virtualization menu
virtio: handle interrupts after callbacks turned off
virtio: reset function
virtio: populate network rings in the probe routine, not open
virtio: Tweak virtio_net defines
virtio: Net header needs hdr_len
virtio: remove unused id field from struct virtio_blk_outhdr
virtio: clarify NO_NOTIFY flag usage
...
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
scsi: fix dependency bug in aic7 Makefile
kbuild: add svn revision information to setlocalversion
kbuild: do not warn about __*init/__*exit symbols being exported
Move Kconfig.instrumentation to arch/Kconfig and init/Kconfig
Add HAVE_KPROBES
Add HAVE_OPROFILE
Create arch/Kconfig
Fix ARM to play nicely with generic Instrumentation menu
kconfig: ignore select of unknown symbol
kconfig: mark config as changed when loading an alternate config
kbuild: Spelling/grammar fixes for config DEBUG_SECTION_MISMATCH
Remove __INIT_REFOK and __INITDATA_REFOK
kbuild: print only total number of section mismatces found
Nick Piggin [Sat, 2 Feb 2008 02:08:53 +0000 (03:08 +0100)]
vm audit: add VM_DONTEXPAND to mmap for drivers that need it
Drivers that register a ->fault handler, but do not range-check the
offset argument, must set VM_DONTEXPAND in the vm_flags in order to
prevent an expanding mremap from overflowing the resource.
I've audited the tree and attempted to fix these problems (usually by
adding VM_DONTEXPAND where it is not obvious).
Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit c9f6d3d5c6d4f4cd3a53549a69c92951180e2a76 ("[POWERPC] adb: Replace
sleep notifier with platform driver suspend/resume hooks") introduced
compile errors on m68k because <linux/platform_device.h> is not
explicitly included. On powerpc, it's pulled in through <asm/prom.h>.
Because hpet_rtc_interrupt()'s call to get_rtc_time() ends up
resolving to include/asm-generic/rtc.h's (hilariously inlined)
get_rtc_time(), which does spin_unlock_irq() from hard IRQ context.
The obvious patch fixes it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Mon, 4 Feb 2008 15:48:07 +0000 (16:48 +0100)]
x86: cpa, fix lookup_address
lookup_address() returns a wrong level and a wrong pointer to a non
existing pte, when pmd or pud entries are marked !present. This
happens for example due to boot time mapping of GART into the low
memory space.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Mon, 4 Feb 2008 15:48:07 +0000 (16:48 +0100)]
x86: AMD Athlon X2 hard hang fix
An Athlon 64 X2 test system showed hard hangs shortly after marking
the kernel text read-only, if we tried to preserve largepages and
changed the PSE entry from RW to RO. The pagetable code itself is
correct, it's the CPU that locked up hard (and not even the NMI
watchdog could punch through that hard hang).
So be conservative and always do splitups - like we did in the past.
Thomas Gleixner [Mon, 4 Feb 2008 15:48:05 +0000 (16:48 +0100)]
x86: no CPA on iounmap
When an ioremap is unmapped, do not change the page attributes. There might
be another mapping of the same physical address. PAT might detect a conflicting
mapping attribute for no good reason. The mapping is removed anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86: use the pfn from the page when change its attributes
When changing the attributes of a pte, we should use the PFN from the
existing PTE rather than going through hoops calculating what we think
it might have been; this is both fragile and totally unneeded. It also
makes it more hairy to call any of these functions on non-direct maps
for no good reason whatsover.
With this change, __change_page_attr() no longer takes a pfn as argument,
which simplifies all the callers.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@tglx.de>
x86: teach the static_protection function about high mappings
Right now, enforcing that the high mapping of the kernel text doesn't
get the NX bit is done deep in the guts of CPA, rather than in the
static_protection() function that enforces all other per-arch sanity
checks.
This patch moves this sanity check into the central static_protection()
function instead, and makes it apply ONLY to the kernel text, not to all
other areas in the high mapping.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Harvey Harrison [Mon, 4 Feb 2008 15:48:05 +0000 (16:48 +0100)]
x86: add cpu mtrr init function definitions to mtrr.h
mtrr.h was included everywhere needed. Fixes the following sparse
warnings. Also, the return types in the extern definitions were
incorrect.
arch/x86/kernel/cpu/mtrr/amd.c:113:12: warning: symbol 'amd_init_mtrr' was not declared. Should it be static?
arch/x86/kernel/cpu/mtrr/cyrix.c:268:12: warning: symbol 'cyrix_init_mtrr' was not declared. Should it be static?
arch/x86/kernel/cpu/mtrr/centaur.c:218:12: warning: symbol 'centaur_init_mtrr' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Harvey Harrison [Mon, 4 Feb 2008 15:48:04 +0000 (16:48 +0100)]
x86: add cpu init function defintions to cpu.h
cpu.h was already included everywhere needed.
Fixes following sparse warnings:
arch/x86/kernel/cpu/amd.c:343:12: warning: symbol 'amd_init_cpu' was not declared. Should it be static?
arch/x86/kernel/cpu/cyrix.c:444:12: warning: symbol 'cyrix_init_cpu' was not declared. Should it be static?
arch/x86/kernel/cpu/cyrix.c:456:12: warning: symbol 'nsc_init_cpu' was not declared. Should it be static?
arch/x86/kernel/cpu/centaur.c:467:12: warning: symbol 'centaur_init_cpu' was not declared. Should it be static?
arch/x86/kernel/cpu/transmeta.c:112:12: warning: symbol 'transmeta_init_cpu' was not declared. Should it be static?
arch/x86/kernel/cpu/intel.c:296:12: warning: symbol 'intel_cpu_init' was not declared. Should it be static?
arch/x86/kernel/cpu/nexgen.c:56:12: warning: symbol 'nexgen_init_cpu' was not declared. Should it be static?
arch/x86/kernel/cpu/umc.c:22:12: warning: symbol 'umc_init_cpu' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Remove bogus reference to "Pentium-II erratum A13" and point to the
actual canonical source of information about what requirements x86
processors have for PAE pagetable updates.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rather than unconditionally reloading cr3, only do so if the pud we're
updating is within the active pgd.
This eliminates TLB flushes most of the time. The
performance-critical uses of pud_clear are during execve and exit, but
in those cases cr3 is referring to some other pagetable. The only
other use of pud_clear is during a large (1Gbyte+) munmap, and those
are sufficiently rare that a couple of cr3 reloads won't hurt.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
H. Peter Anvin [Mon, 4 Feb 2008 15:48:00 +0000 (16:48 +0100)]
asm-generic/tlb.h: remove <linux/quicklist.h>
Remove unused <linux/quicklist.h> from <asm-generic/tlb.h>; per
Christoph Lameter this should have been part of a previous patch
reversal but apparently didn't get removed.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
H. Peter Anvin [Mon, 4 Feb 2008 15:48:00 +0000 (16:48 +0100)]
x86 setup: print missing CPU features in cleartext
Instead of obscure numbers, print the list of missing CPU features in
cleartext. To conserve space, use a host program (mkcpustr.c) to
produce a compact list of mandatory features only.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
H. Peter Anvin [Mon, 4 Feb 2008 15:48:00 +0000 (16:48 +0100)]
x86: unify CPU feature string names
Move the CPU feature string names to a separate file (common to 32
and 64 bits); additionally, make <asm/cpufeature.h> includable by host
code in preparation for including the CPU feature strings in the boot
code.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
the p parameter is an explicit memory reference, and is
enough to prevent gcc to being nasty here. The volatile
seems completely not needed.
This reflects incorrect understanding of the function of the volatile
keyword there. The purpose of the volatile keyword is informing gcc
that it is safe to pass a volatile pointer to this function.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
After /dev/*/cpuid was introduced, Intel changed the semantics of the
CPUID instruction to be sentitive to %ecx as well as %eax. This patch
allows querying of %ecx-sensitive levels by placing the %ecx value in
the upper 32 bits of the file position (lower 32 bits always were used
for the %eax value.)
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sam Ravnborg [Mon, 4 Feb 2008 15:47:55 +0000 (16:47 +0100)]
x86: restore correct module name for apm
The apm module were renamed to apm_32 during the merge of 32 and 64 bit
x86 which is unfortunate. As apm is 32 bit specific we like to keep the
_32 in the filename but the module should be named apm.
Fix this in the Makefile.
Reported-by: "A.E.Lawrence" <lawrence_a_e@ntlworld.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "A.E.Lawrence" <lawrence_a_e@ntlworld.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (77 commits)
[IPV6]: Reorg struct ifmcaddr6 to save some bytes
[INET_TIMEWAIT_SOCK]: Reorganize struct inet_timewait_sock to save some bytes
[DCCP]: Reorganize struct dccp_sock to save 8 bytes
[INET6]: Reorganize struct inet6_dev to save 8 bytes
[SOCK] proto: Add hashinfo member to struct proto
EMAC driver: Fix bug: The clock divisor is set to all ones at reset.
EMAC driver: fix bug - invalidate data cache of new_skb->data range when cache is WB
EMAC driver: add power down mode
EMAC driver: ADSP-BF52x arch/mach support
EMAC driver: use simpler comment headers and strip out information that is maintained in the scm's log
EMAC driver: bf537 MAC multicast hash filtering patch
EMAC driver: define MDC_CLK=2.5MHz and caculate mdc_div according to SCLK.
EMAC driver: shorten the mdelay value to solve netperf performance issue
[netdrvr] sis190: build fix
sky2: fix Wake On Lan interaction with BIOS
sky2: restore multicast addresses after recovery
pci-skeleton: Misc fixes to build neatly
phylib: Add Realtek 821x eth PHY support
natsemi: Update locking documentation
PHYLIB: Locking fixes for PHY I/O potentially sleeping
...
Rusty Russell [Tue, 5 Feb 2008 04:50:12 +0000 (23:50 -0500)]
virtio: balloon driver
After discussions with Anthony Liguori, it seems that the virtio
balloon can be made even simpler. Here's my attempt.
The device configuration tells the driver how much memory it should
take from the guest (ie. balloon size). The guest feeds the page
numbers it has taken via one virtqueue.
A second virtqueue feeds the page numbers the driver wants back: if
the device has the VIRTIO_BALLOON_F_MUST_TELL_HOST bit, then this
queue is compulsory, otherwise it's advisory (and the guest can simply
fault the pages back in).
This driver can be enhanced later to deflate the balloon via a
shrinker, oom callback or we could even go for a complete set of
in-guest regulators.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Anthony Liguori [Mon, 28 Jan 2008 15:59:59 +0000 (09:59 -0600)]
virtio: Use PCI revision field to indicate virtio PCI ABI version
As Avi pointed out, as we continue to massage the virtio PCI ABI, we can make
things a little more friendly to users by utilizing the PCI revision field to
indicate which version of the ABI we're using. This is a hard ABI version
and incrementing it will cause the guest driver to break.
This is the necessary changes to virtio_pci to support this.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
virtio_blk: implement naming for vda-vdz,vdaa-vdzz,vdaaa-vdzzz
Am Freitag, 1. Februar 2008 schrieb Christian Borntraeger:
> Right. I will fix that with an additional patch.
This patch goes on top of the minor number patch. Please let me know if
you want a merged patch:
Currently virtio_blk creates the disk name combinging "vd" with 'a'++.
This will give strange names after vdz. I have implemented names up to
vdzzz - inspired by the sd.c code. That should be sufficient for now.
There is one driver in the kernel (driver/s390/block/dasd_genhd.c) that
implements names from dasda-dasdzzzz allowing even more disks. Maybe
a janitor can come up with a common implementation usable for all kind
of block device drivers.
I have tested this patch with 100 disks - seems to work.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
currently virtio_blk uses one major number per device. While this works
quite well on most systems it is wasteful and will exhaust major numbers
on larger installations.
This patch allocates a major number on init and will use 16 minor numbers
for each disk. That will allow ~64k virtio_blk disks.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I currently try to make my guest boot from an virtio root device
without having an external kernel. Some of the tools that I tried
expect HDIO_GETGEO to work. The most interesting value is likely
the geo.start value to get the offset of a partition. This value
is filled by block/ioctl.c if fops->getgeo is set. This patch also
fills in some standard values for heads, sectors and cylinders.
Makes sense?
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
projects / linux-2.6-omap-h63xx.git / log