Prevent keyboard interrupt from staying masked when omap-keypad driver
is suspended to allow this interrupt to trigger a system wake up.
Locks are used as suggested by Juha Yrjölä.
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Jarkko Nikula [Mon, 23 Oct 2006 18:18:43 +0000 (21:18 +0300)]
ARM: OMAP: I2C: Do not use interruptible wait call in omap_i2c_xfer_msg
If there is a signal pending and wait_for_completion_interruptible_timeout
terminates with -ERESTARTSYS, we return and disable the i2c clocks in
omap_i2c_xfer.
If we terminate before sending last i2c message with a stop condition, the
bus remains busy and we are not able to send new messages into bus with
successive omap_i2c_xfer calls. Therefore a pending signal is not caught
here and we return only because of timeout or i2c error.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
ALSA driver for OMAP boards with a TSC2102 chip. It is based on the
TSC2101 and AIC23 drivers. The chip has only one audio playback output
and no inputs. It can play stereo sound with 16-bit samples (only) and
supports different sampling rates between 8 and 48 kHz. The patch also
includes an ALSA mixer. The mixer controlls two volume levels, for
left and right channels, each with 128 steps. It can also toggle the
analog de-emphasis filter and bass boost filter which are incorporated
in the chip.
In addition to that the chip has an equaliser filter, but the mixer
doesn't use it because the coefficients of the filter are difficult to
map to other values used in normal equalisers. Maybe they should have
constant values per board.
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>
This adds a driver for the TSC2102 chip by Texas Instruments. This
driver is responsible for all communication with the chip and doesn't
export anything for user-space, but for other drivers controlling
devices connected to the chip.
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>
David Brownell [Thu, 19 Oct 2006 13:34:27 +0000 (16:34 +0300)]
ARM: OMAP: omap2/gpmc updates
GPMC updates:
- bugfixes: wrong/missing flags, omitted write, wrong test
- don't map memory segments starting at zero
- improve debug messaging
- export gpmc_get_fclk_perio]d() since it's needed to calc timings
- expect gpmc_cs_set_timings() caller to have initialized sync vs async
Note that this API is glitchy; likely the best fix would be to add
a member to "struct gpmc_timings" to hold GPMC_CONFIG1, since that
holds one key aspect of the GPMC timings (the gpmc_fclk divisor,
and sync vs. async == whether that divisor matters).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
David Brownell [Wed, 18 Oct 2006 19:44:53 +0000 (22:44 +0300)]
ARM: OMAP: 24xx pinmux updates
Add some OMAP 24xx pin mux declarations to support:
- TUSB 6010 EVM (on H4)
- All three full speed USB ports
- GPIOs used with USB0 on Apollon and H4
For OMAP2, issue MUX_WARNINGS and debug messages correctly; and make the
message look more like the OMAP1 message.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
David Brownell [Wed, 18 Oct 2006 19:40:40 +0000 (22:40 +0300)]
ARM: OMAP: /sys/kernel/debug/omap_gpio
Add some GPIO debug support: /sys/kernel/debug/omap_gpio dumps the state
of all GPIOs that have been claimed, including basic IRQ info if relevant.
Tested on 24xx, 16xx.
Includes minor bugfixes: recording IRQ trigger mode (this should probably
be a genirq patch), adding missing space to non-wakeup warning
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
[PATCH] ARM: OMAP: Add support for Amstrad Delta keypad
This adds support for the keypad on the top of the Amstrad Delta. It's
just a standard omap-keypad so all we need to do is add the keypad
layout and platform data to the board definition file.
Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Tony Lindgren <tony@atomide.com>
Franck Bui-Huu [Thu, 12 Oct 2006 19:06:33 +0000 (21:06 +0200)]
[PATCH] Fix up mmap_kmem
vma->vm_pgoff is an pfn _offset_ relatif to the begining
of the memory start. The previous code was doing at first:
vma->vm_pgoff << PAGE_SHIFT
which results into a wrong physical address since some
platforms have a physical mem start that can be different
from 0. After that the previous call __pa() on this
wrong physical address, however __pa() is used to convert
a _virtual_ address into a physical one.
This patch rewrites this convertion. It calculates the
pfn of PAGE_OFFSET which is the pfn of the mem start
then it adds the vma->vm_pgoff to it.
It also uses virt_to_phys() instead of __pa() since the
latter shouldn't be used by drivers.
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
[GFS2] Update git tree name/location
[DLM] fix iovec length in recvmsg
[GFS2] Pass the correct value to kunmap_atomic
[GFS2] Fix bug where lock not held
[DLM] Kconfig: don't show an empty DLM menu
[GFS2] Fix uninitialised variable
[GFS2] Fix a size calculation error
Petr Vandrovec [Fri, 13 Oct 2006 02:13:16 +0000 (04:13 +0200)]
[PATCH] Get core dump code to work...
The file based core dump code was broken by pipe changes - a relative
llseek returns the absolute file position on success, not the relative
one, so dump_seek() always failed when invoked with non-zero current
position.
Only success/failure can be tested with relative lseek, we have to trust
kernel that on success we've got right file offset. With this fix in
place I have finally real core files instead of 1KB fragments...
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
[ Cleaned it up a bit while here - use SEEK_CUR instead of hardcoding 1 ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (27 commits)
[CIFS] Missing flags2 for DFS
[CIFS] Workaround incomplete byte length returned by some
[CIFS] cifs Kconfig: don't select CONNECTOR
[CIFS] Level 1 QPathInfo needed for proper OS2 support
[CIFS] fix typo in previous patch
[CIFS] Fix old DOS time conversion to handle timezone
[CIFS] Do not need to adjust for Jan/Feb for leap day
[CIFS] Fix leaps year calculation for years after 2100
[CIFS] readdir (ffirst) enablement of accurate timestamps from legacy servers
[CIFS] Fix compiler warning with previous patch
[CIFS] Fix typo
[CIFS] Allow for 15 minute TZs (e.g. Nepal) and be more explicit about
[CIFS] Fix readdir of large directories for backlevel servers
[CIFS] Allow LANMAN21 support even in both POSIX non-POSIX path
[CIFS] Make use of newer QFSInfo dependent on capability bit instead of
[CIFS] Do not send newer QFSInfo to legacy servers which can not support it
[CIFS] Fix typo in name of new cifs_show_stats
[CIFS] Rename server time zone field
[CIFS] Handle legacy servers which return undefined time zone
[CIFS] CIFS support for /proc/<pid>/mountstats part 1
...
James Bottomley [Fri, 13 Oct 2006 03:21:16 +0000 (22:21 -0500)]
[VOYAGER] fix genirq mess
The implementation of genirq in x86 completely broke voyager (and
presumably visws). Since it's plugged into so much of the x86
infrastructure, you can't expect it to work unconverted.
This patch introduces a voyager IRQ handler type and switches voyager
to the genirq infrastructure.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
The plan is to have two trees. One for bug fixes to be sent on a
regular basis (-fixes) and another called -nmw which will contain items
queued for the next merge window (hence the name). The -nmw tree
will come & go according to need.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Adrian Bunk [Sun, 8 Oct 2006 02:30:48 +0000 (04:30 +0200)]
[DLM] Kconfig: don't show an empty DLM menu
Don't show an empty "Distributed Lock Manager" menu if IP_SCTP=n.
Reported by Dmytro Bagrii in kernel Bugzilla #7268.
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This fixes a bug where, in certain cases an uninitialised variable
could cause a dereference of a NULL pointer in gfs2_commit_write().
Also a typo in a comment is fixed at the same time.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Andrew Morton [Thu, 12 Oct 2006 15:07:55 +0000 (15:07 +0000)]
[CIFS] cifs Kconfig: don't select CONNECTOR
`select' is a bit obnoxious: the option keeps on coming back
and it's hard to work out what to do to make it go away again.
The use of `depends on' is preferred (although it has
usability problems too..)
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
Linus Torvalds [Thu, 12 Oct 2006 14:49:46 +0000 (07:49 -0700)]
Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
[PATCH] block layer: ioprio_best function fix
[PATCH] ide-cd: fix breakage with internally queued commands
[PATCH] block layer: elv_iosched_show should get elv_list_lock
[PATCH] splice: fix pipe_to_file() ->prepare_write() error path
[PATCH] block layer: elevator_find function cleanup
[PATCH] elevator: elevator_type member not used
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[PKT_SCHED] sch_htb: use rb_first() cleanup
[RTNETLINK]: Fix use of wrong skb in do_getlink()
[DECNET]: Fix sfuzz hanging on 2.6.18
[NET]: Do not memcmp() over pad bytes of struct flowi.
[NET]: Introduce protocol-specific destructor for time-wait sockets.
[NET]: Use typesafe inet_twsk() inline function instead of cast.
[NET]: Use hton{l,s}() for non-initializers.
[TCP]: Use TCPOLEN_TSTAMP_ALIGNED macro instead of magic number.
[IPV6]: Seperate sit driver to extra module (addrconf.c changes)
[IPV6]: Seperate sit driver to extra module
[NET]: File descriptor loss while receiving SCM_RIGHTS
[SCTP]: Fix the RX queue size shown in /proc/net/sctp/assocs output.
[SCTP]: Fix receive buffer accounting.
SELinux: Bug fix in polidydb_destroy
IPsec: fix handling of errors for socket policies
IPsec: correct semantics for SELinux policy matching
IPsec: propagate security module errors up from flow_cache_lookup
NetLabel: use SECINITSID_UNLABELED for a base SID
NetLabel: fix a cache race condition
Vasily Tarasov [Thu, 12 Oct 2006 13:09:51 +0000 (15:09 +0200)]
[PATCH] block layer: ioprio_best function fix
Currently ioprio_best function first checks wethere aioprio or bioprio equals
IOPRIO_CLASS_NONE (ioprio_valid() macros does that) and if it is so it returns
bioprio/aioprio appropriately. Thus the next four lines, that set aclass/bclass
to IOPRIO_CLASS_BE, if aclass/bclass == IOPRIO_CLASS_NONE, are never executed.
The second problem: if aioprio from class IOPRIO_CLASS_NONE and bioprio from
class IOPRIO_CLASS_IDLE are passed to ioprio_best function, it will return
IOPRIO_CLASS_IDLE. It means that during __make_request we can merge two
requests and set the priority of merged request to IDLE, while one of
the initial requests originates from a process with NONE (default) priority.
So we can get a situation when a process with default ioprio will experience
IO starvation, while there is no process from real-time class in the system.
Just removing ioprio_valid check should correct situation.
Joerg Roedel [Tue, 10 Oct 2006 21:49:53 +0000 (14:49 -0700)]
[IPV6]: Seperate sit driver to extra module (addrconf.c changes)
This patch contains the changes to net/ipv6/addrconf.c to remove sit
specific code if the sit driver is not selected.
Signed-off-by: Joerg Roedel <joro-lkml@zlug.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Joerg Roedel [Tue, 10 Oct 2006 21:47:44 +0000 (14:47 -0700)]
[IPV6]: Seperate sit driver to extra module
This patch removes the driver of the IPv6-in-IPv4 tunnel driver (sit)
from the IPv6 module. It adds an option to Kconfig which makes it
possible to compile it as a seperate module.
Signed-off-by: Joerg Roedel <joro-lkml@zlug.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Miklos Szeredi [Tue, 10 Oct 2006 04:42:14 +0000 (21:42 -0700)]
[NET]: File descriptor loss while receiving SCM_RIGHTS
If more than one file descriptor was sent with an SCM_RIGHTS message,
and on the receiving end, after installing a nonzero (but not all)
file descritpors the process runs out of fds, then the already
installed fds will be lost (userspace will have no way of knowing
about them).
The following patch makes sure, that at least the already installed
fds are sent to userspace. It doesn't solve the issue of losing file
descriptors in case of an EFAULT on the userspace buffer.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Tue, 10 Oct 2006 04:34:26 +0000 (21:34 -0700)]
[SCTP]: Fix the RX queue size shown in /proc/net/sctp/assocs output.
Show the true receive buffer usage.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Tue, 10 Oct 2006 04:34:04 +0000 (21:34 -0700)]
[SCTP]: Fix receive buffer accounting.
When doing receiver buffer accounting, we always used skb->truesize.
This is problematic when processing bundled DATA chunks because for
every DATA chunk that could be small part of one large skb, we would
charge the size of the entire skb. The new approach is to store the
size of the DATA chunk we are accounting for in the sctp_ulpevent
structure and use that stored value for accounting.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chad Sellers [Fri, 6 Oct 2006 20:09:52 +0000 (16:09 -0400)]
SELinux: Bug fix in polidydb_destroy
This patch fixes two bugs in policydb_destroy. Two list pointers
(policydb.ocontexts[i] and policydb.genfs) were not being reset to NULL when
the lists they pointed to were being freed. This caused a problem when the
initial policy load failed, as the policydb being destroyed was not a
temporary new policydb that was thrown away, but rather was the global
(active) policydb. Consequently, later functions, particularly
sys_bind->selinux_socket_bind->security_node_sid and
do_rw_proc->selinux_sysctl->selinux_proc_get_sid->security_genfs_sid tried
to dereference memory that had previously been freed.
Signed-off-by: Chad Sellers <csellers@tresys.com> Signed-off-by: James Morris <jmorris@namei.org>
This treats the security errors encountered in the case of
socket policy matching, the same as how these are treated in
the case of main/sub policies, which is to return a full lookup
failure.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: James Morris <jmorris@namei.org>
IPsec: correct semantics for SELinux policy matching
Currently when an IPSec policy rule doesn't specify a security
context, it is assumed to be "unlabeled" by SELinux, and so
the IPSec policy rule fails to match to a flow that it would
otherwise match to, unless one has explicitly added an SELinux
policy rule allowing the flow to "polmatch" to the "unlabeled"
IPSec policy rules. In the absence of such an explicitly added
SELinux policy rule, the IPSec policy rule fails to match and
so the packet(s) flow in clear text without the otherwise applicable
xfrm(s) applied.
The above SELinux behavior violates the SELinux security notion of
"deny by default" which should actually translate to "encrypt by
default" in the above case.
This was first reported by Evgeniy Polyakov and the way James Morris
was seeing the problem was when connecting via IPsec to a
confined service on an SELinux box (vsftpd), which did not have the
appropriate SELinux policy permissions to send packets via IPsec.
With this patch applied, SELinux "polmatching" of flows Vs. IPSec
policy rules will only come into play when there's a explicit context
specified for the IPSec policy rule (which also means there's corresponding
SELinux policy allowing appropriate domains/flows to polmatch to this context).
Secondly, when a security module is loaded (in this case, SELinux), the
security_xfrm_policy_lookup() hook can return errors other than access denied,
such as -EINVAL. We were not handling that correctly, and in fact
inverting the return logic and propagating a false "ok" back up to
xfrm_lookup(), which then allowed packets to pass as if they were not
associated with an xfrm policy.
The solution for this is to first ensure that errno values are
correctly propagated all the way back up through the various call chains
from security_xfrm_policy_lookup(), and handled correctly.
Then, flow_cache_lookup() is modified, so that if the policy resolver
fails (typically a permission denied via the security module), the flow
cache entry is killed rather than having a null policy assigned (which
indicates that the packet can pass freely). This also forces any future
lookups for the same flow to consult the security module (e.g. SELinux)
for current security policy (rather than, say, caching the error on the
flow cache entry).
This patch: Fix the selinux side of things.
This makes sure SELinux polmatching of flow contexts to IPSec policy
rules comes into play only when an explicit context is associated
with the IPSec policy rule.
Also, this no longer defaults the context of a socket policy to
the context of the socket since the "no explicit context" case
is now handled properly.
Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com> Signed-off-by: James Morris <jmorris@namei.org>
James Morris [Thu, 5 Oct 2006 20:42:27 +0000 (15:42 -0500)]
IPsec: propagate security module errors up from flow_cache_lookup
When a security module is loaded (in this case, SELinux), the
security_xfrm_policy_lookup() hook can return an access denied permission
(or other error). We were not handling that correctly, and in fact
inverting the return logic and propagating a false "ok" back up to
xfrm_lookup(), which then allowed packets to pass as if they were not
associated with an xfrm policy.
The way I was seeing the problem was when connecting via IPsec to a
confined service on an SELinux box (vsftpd), which did not have the
appropriate SELinux policy permissions to send packets via IPsec.
The first SYNACK would be blocked, because of an uncached lookup via
flow_cache_lookup(), which would fail to resolve an xfrm policy because
the SELinux policy is checked at that point via the resolver.
However, retransmitted SYNACKs would then find a cached flow entry when
calling into flow_cache_lookup() with a null xfrm policy, which is
interpreted by xfrm_lookup() as the packet not having any associated
policy and similarly to the first case, allowing it to pass without
transformation.
The solution presented here is to first ensure that errno values are
correctly propagated all the way back up through the various call chains
from security_xfrm_policy_lookup(), and handled correctly.
Then, flow_cache_lookup() is modified, so that if the policy resolver
fails (typically a permission denied via the security module), the flow
cache entry is killed rather than having a null policy assigned (which
indicates that the packet can pass freely). This also forces any future
lookups for the same flow to consult the security module (e.g. SELinux)
for current security policy (rather than, say, caching the error on the
flow cache entry).
Testing revealed a problem with the NetLabel cache where a cached entry could
be freed while in use by the LSM layer causing an oops and other problems.
This patch fixes that problem by introducing a reference counter to the cache
entry so that it is only freed when it is no longer in use.
Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
Martin Habets [Wed, 11 Oct 2006 21:58:30 +0000 (14:58 -0700)]
[SPARC32]: Fix sparc32 modpost warnings.
Fix these 2.6.19-rc1 build warnings from modpost:
WARNING: vmlinux - Section mismatch: reference to .init.text:_sinittext from .text between 'core_kernel_text' (at offset 0x3e060) and '__kernel_text_address'
WARNING: vmlinux - Section mismatch: reference to .init.text:_sinittext from .text between 'core_kernel_text' (at offset 0x3e064) and '__kernel_text_address'
WARNING: vmlinux - Section mismatch: reference to .init.text:_einittext from .text between 'core_kernel_text' (at offset 0x3e07c) and '__kernel_text_address'
WARNING: vmlinux - Section mismatch: reference to .init.text:_einittext from .text between 'core_kernel_text' (at offset 0x3e080) and '__kernel_text_address'
WARNING: vmlinux - Section mismatch: reference to .init.text:_sinittext from .text between 'is_ksym_addr' (at offset 0x4b3a4) and 'kallsyms_expand_symbol'
WARNING: vmlinux - Section mismatch: reference to .init.text:_sinittext from .text between 'is_ksym_addr' (at offset 0x4b3a8) and 'kallsyms_expand_symbol'
WARNING: vmlinux - Section mismatch: reference to .init.text:_einittext from .text between 'is_ksym_addr' (at offset 0x4b3b4) and 'kallsyms_expand_symbol'
WARNING: vmlinux - Section mismatch: reference to .init.text:_einittext from .text between 'is_ksym_addr' (at offset 0x4b3e4) and 'kallsyms_expand_symbol'
WARNING: vmlinux - Section mismatch: reference to .init.text:_sinittext from .text between 'get_symbol_pos' (at offset 0x4b640) and 'kallsyms_lookup_size_offset'
WARNING: vmlinux - Section mismatch: reference to .init.text:_sinittext from .text between 'get_symbol_pos' (at offset 0x4b644) and 'kallsyms_lookup_size_offset'
WARNING: vmlinux - Section mismatch: reference to .init.text:_einittext from .text between 'get_symbol_pos' (at offset 0x4b654) and 'kallsyms_lookup_size_offset'
WARNING: vmlinux - Section mismatch: reference to .init.text:_einittext from .text between 'get_symbol_pos' (at offset 0x4b658) and 'kallsyms_lookup_size_offset'
WARNING: vmlinux - Section mismatch: reference to .init.text:_sinittext from .text between 'get_symbol_pos' (at offset 0x4b68c) and 'kallsyms_lookup_size_offset'
The crux of the matter is that modpost only checks the relocatable
sections. i386 vmlinux has none, so modpost does no checking on it (it
does on the modules). However, sparc vmlinux has plenty of
relocatable sections because it is being built with 'ld -r' (to allow
for btfixup processing). So for sparc, modpost does do a lot of
checking. Sure enough, running modpost on arch/sparc/boot/image yields
no output (i.e. all is well).
modpost.c check_sec_ref() has:
/* We want to process only relocation sections and not .init */
if (sechdrs[i].sh_type == SHT_RELA) {
// check here
} else if (sechdrs[i].sh_type == SHT_REL) {
// check here
}
Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Habets [Tue, 10 Oct 2006 21:44:01 +0000 (14:44 -0700)]
[SPARC32]: Fix sparc32 modpost warnings with sunzilog
Fix this 2.6.19-rc1 build warnings from modpost:
WARNING: vmlinux - Section mismatch: reference to .init.text:sunzilog_console_setup from .data between 'sunzilog_console' (at offset 0x8394) and 'devices_subsys'
Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Habets [Tue, 10 Oct 2006 21:36:47 +0000 (14:36 -0700)]
[SPARC32]: Mark srmmu_nocache_init as __init.
Fix these 2.6.19-rc1 build warnings from modpost:
WARNING: vmlinux - Section mismatch: reference to .init.text:__alloc_bootmem from .text between 'srmmu_nocache_init' (at offset 0x1a0f8) and 'srmmu_mmu_info'
WARNING: vmlinux - Section mismatch: reference to .init.text:__alloc_bootmem from .text between 'srmmu_nocache_init' (at offset 0x1a118) and 'srmmu_mmu_info'
WARNING: vmlinux - Section mismatch: reference to .init.text:srmmu_early_allocate_ptable_skeleton from .text between 'srmmu_nocache_init' (at offset 0x1a188) and 'srmmu_mmu_info'
Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Mundt [Thu, 12 Oct 2006 03:03:04 +0000 (12:03 +0900)]
sh: interrupt exception handling rework
Kill off interrupt_table for all of the CPU subtypes, we now
default in to stepping in to do_IRQ() for _all_ IRQ exceptions
and counting the spurious ones, rather than simply flipping on
the ones we cared about. This and enabling the IRQ by default
automatically has already uncovered a couple of bugs and IRQs
that weren't being caught, as well as some that are being
generated far too often (SCI Tx Data Empty, for example).
The general rationale is to use a marker for interrupt exceptions,
test for it in the handle_exception() path, and skip out to
do_IRQ() if it's found. Everything else follows the same behaviour
of finding the cached EXPEVT value in r2/r2_bank, we just rip out
the INTEVT read from entry.S entirely (except for in the kGDB NMI
case, which is another matter).
Note that while this changes the do_IRQ() semantics regarding r4
handling, they were fundamentally broken anyways (relying entirely
on r2_bank for the cached code). With this, we do the INTEVT read
from do_IRQ() itself (in the CONFIG_CPU_HAS_INTEVT case), or fall
back on r4 for the muxed IRQ number, which should also be closer
to what SH-2 and SH-2A want anyways.
Linus Torvalds [Wed, 11 Oct 2006 22:30:14 +0000 (15:30 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] Pass NULL not 0 for pointer value.
[MIPS] IP27: Make declaration of setup_replication_mask a proper prototype.
[MIPS] BigSur: More useful defconfig.
[MIPS] Cleanup definitions of speed_t and tcflag_t.
[MIPS] Fix compilation warnings in arch/mips/sibyte/bcm1480/smp.c
[MIPS] Optimize and cleanup get_saved_sp, set_saved_sp
[MIPS] <asm/irq.h> does not need pt_regs anymore.
[MIPS] Workaround for bug in gcc -EB / -EL options.
[MIPS] Fix timer setup for Jazz
projects / linux-2.6-omap-h63xx.git / log