Hans Verkuil [Sun, 7 Sep 2008 11:38:50 +0000 (08:38 -0300)]
V4L/DVB (8946): dib7000m: fix powerpc build error
The dib7000m_i2c_enumeration() function is not used by any public drivers,
however some prototype board use it. So '#if 0' for now, but don't remove it.
Thanks to Patrick Boettcher for clarifying this.
Cc: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 6 Sep 2008 18:26:44 +0000 (15:26 -0300)]
V4L/DVB (8940): saa7115: fix saa7111(a) support
The saa7111 support in saa7115.c was missing some features and did not
properly take some of the differences into account. With this patch
saa7115 can be used in the mxb driver instead of saa7111.c.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 6 Sep 2008 12:56:17 +0000 (09:56 -0300)]
V4L/DVB (8921): ivtv: fix incorrect capability and assorted sliced vbi and video out fmt fixes
- V4L2_CAP_VBI_OUTPUT is not supported by ivtv, remove it.
- ivtv_try_fmt_vid_out also needed to constrain the width/height of MPEG decoder
window sizes.
- allow empty sliced services.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 6 Sep 2008 09:34:44 +0000 (06:34 -0300)]
V4L/DVB (8917): saa7134-empress: fix changing the capture standard for non-tuner inputs
When changing the standard the saa6752hs was not updated unless the input
was the TV tuner. The saa6752hs should be updated regardless of the input.
In addition the S_STD and G_STD ioctls for the mpeg video device didn't do
anything. This is now fixed: they behave just like S_STD and G_STD on the
video0 device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Thu, 4 Sep 2008 16:16:40 +0000 (13:16 -0300)]
V4L/DVB (8915): cx18: Increment u8 pointers not void pointers.
cx18: Increment u8 pointers not void pointers. Incrementing void pointers
is dubious and the real intent in cx18_memcpy_fromio() and cx18_memset_io() is
to increment by bytes, so use u8 pointers instead.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Mon, 1 Sep 2008 03:40:41 +0000 (00:40 -0300)]
V4L/DVB (8914): cx18: Throttle mmio to/from the CX23418 so boards work in older systems
cx18: Throttle mmio to/from the CX23418 so boards work in older systems. The
CX23418 couldn't reliably handle mmio at the rate at which the cx18 driver was
attempting to access the chip. The PCI bridge arrangements and settings on
modern motherboards still allowed the CX23418 to work OK, but it didn't work
well on many older motherboards: mysterious I2C errors, firmware loading errors,
etc. This patch adds a throttle to *all* mmio access to the CX23418. It
defaults to a delay of 31 ns, but is adjustable by the mmio_ndelay module parm.
My HVR-1600 and Raptor PAL/SECAM card now function for analog capture on a
motherboard with an Intel 82810E Northbridge and 82801AA Southbridge.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 30 Aug 2008 19:03:44 +0000 (16:03 -0300)]
V4L/DVB (8913): cx18: Create cx18_ specific wrappers for all pci mmio accessesors.
cx18: Create cx18_ specific wrappers for all pci mmio accessesors. This is a
first step in instrumenting all CX23418 PCI bus IO, to debug problems with
accessing the CX23418's PCI memory mapped IO.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cx18: Correct CX23418 PCI configuration settings. The CX23418 doesn't have
I/O space registers, so there was no need to try and turn them on (the card
ignores the attempt to set the bit anyway). Also removed incorrect config
space register setting that was errantly borrowed from ivtv.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Mon, 1 Sep 2008 00:06:11 +0000 (21:06 -0300)]
V4L/DVB (8901): pvrusb2: Disable virtual IR device when not needed.
Disable "virtual" IR receiver on for 24xxx devices that have an
internal IR blaster. In that case there's another another IR
receiver present and to leave the virtual receiver available
just causes confusion. This means that 24xxx users will no
longer see a phantom IR chip.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Mon, 1 Sep 2008 00:02:20 +0000 (21:02 -0300)]
V4L/DVB (8900): pvrusb2: Implement cropping pass through
This builds upon the previous pvrusb2 change to more formally
implement full cropping support. This enables access from the
driver's V4L interface, and enables access to full capabilities from
sysfs as well. Note that this is only effective when in analog mode.
It also will only work when the underlying digitizer's driver (saa7115
or cx25840 depending on the hardware) also implements the appropriate
functions.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sun, 31 Aug 2008 23:55:03 +0000 (20:55 -0300)]
V4L/DVB (8898): pvrusb2: Be able to programmatically retrieve a control's default value
The pvrusb2 control mechanism up until now has used a constant int to
hold a control's default value. This change makes it possible to
retrieve the control's default through some other means, e.g. as a
result of a query from lower level software.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 30 Aug 2008 21:11:40 +0000 (18:11 -0300)]
V4L/DVB (8895): pvrusb2: Fail gracefully if an alien USB ID is used
The driver includes an internal table specifying additional
information on a per device-type basis. This works great until
somebody tries to run-time associate another USB ID with the driver.
This change should hopefully allow the driver to fail gracefully under
such a circumstance.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mike Isely [Sat, 30 Aug 2008 18:11:16 +0000 (15:11 -0300)]
V4L/DVB (8894): pvrusb2: Remove BKL
The earlier change from Hans Verkuil that pushed the BKL from
video_open() down into the drivers should be unneeded for the pvrusb2
driver. This driver's implementation for open already protects its
internal structures through other means, thus the BKL is not required.
This change reverses Hans' previous change, for the pvrusb2 driver.
It probably would have been a good idea for Hans to previously have
asked for my ack before committing his change.
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Wed, 3 Sep 2008 22:15:27 +0000 (19:15 -0300)]
V4L/DVB (8889): dvb-ttpci: Support full-ts hardware modification
Add support for the 'full-ts' hardware modification.
On full-featured cards the data throughput is limited by the hardware
design. The full-ts mod removes this bottleneck, i.e. the card is able
to deliver the complete transport stream of a transponder.
For details see http://www.escape-edv.de/endriss/dvb-full-ts-mod
Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When the input is set to tuner and no antenna is connected, the BT848
can flood VPRES interrupts. So we don't want to enable this type of
interrupts when the input it set to tuner.
As we don't do anything when receiving such an interrupt anyway, the
easiest fix is to simply not unmask this specific interrupt.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 29 Aug 2008 20:31:35 +0000 (17:31 -0300)]
V4L/DVB (8852): v4l2: use register_chrdev_region instead of register_chrdev
Replace the old register_chrdev with the more flexible register_chrdev_region.
Ensure that the release() is called when the very last chardev usage was
released, and not when the sysfs devices were removed. This should simplify
hotpluggable drivers considerably.
Tested-by: Mike Isely <isely@isely.net> Tested-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: David Ellingsworth <david@identd.dyndns.org> Reviewed-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
David Howells [Wed, 27 Aug 2008 13:46:39 +0000 (10:46 -0300)]
V4L/DVB (8838): CRED: Wrap task credential accesses in video input drivers
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Steven Toth [Tue, 12 Aug 2008 16:30:03 +0000 (13:30 -0300)]
V4L/DVB (8807): Add DVB support for the Leadtek Winfast PxDVR3200 H
This patch is on behalf of Stephen Backway <stev391@email.com>, and
represents two patches I received (and some subsequent whitespace
cleanup I had due to how I pulled the patches).
From the original author:
a) Add DVB support for the Leadtek Winfast PxDVR3200 H.
b) The tuner callback previously checked the command 3 times:
1) To see if it was the XC2028_RESET_CLK
2) To see if it was not the XC2028_RESET_TUNER
3) To see if it was the XC2028_RESET_TUNER
This patch removes the third check.
Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Stephen Backway <stev391@email.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When buffer_setup is run we start the TS initialization: set SAA7134_TS_STOPPED.
When all buffers are prepared we write data into DMA register and set
SAA7134_TS_BUFF_DONE.
When the first buffer is active start TS and set SAA7134_TS_STARTED.
When ts_release is called stop TS and set SAA7134_TS_STOPPED.
Hans Verkuil [Sun, 24 Aug 2008 14:18:47 +0000 (11:18 -0300)]
V4L/DVB (8791): v4l2-dev: do not clear the driver_data field
The driver_data field of the device structure was zeroed, thus losing
this information. Many drivers set this up before calling
video_device_register, so we have to ensure that it isn't lost.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 23 Aug 2008 09:27:59 +0000 (06:27 -0300)]
V4L/DVB (8784): v4l2-dev: make the video_device's release callback mandatory
Now that all drivers set the release callback in the video_device
struct we can put in a BUG_ON in video_register_device to ensure that
the callback is always there.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 23 Aug 2008 09:23:55 +0000 (06:23 -0300)]
V4L/DVB (8783): v4l: add all missing video_device release callbacks
All drivers that call video_device_register where checked to see if they
set the release callback of struct video_device. Where that callback was
missing it was added.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 23 Aug 2008 21:36:50 +0000 (18:36 -0300)]
V4L/DVB (8774): cx18: Have CX23418 release buffers at end of capture.
cx18: Have CX23418 release buffers at end of capture. The CX23418 reuses task
handles so we need to have it release the buffers associated with a task handle
at the end of a capture. If we don't, buffer ids used for one type of stream
in the driver (MPEG, TS, PCM), could be used for another type of stream by the
CX23418, if a previously used handle is assigned to a different type of stream.
The driver would drop valid buffers when this happened.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 23 Aug 2008 19:42:29 +0000 (16:42 -0300)]
V4L/DVB (8773): cx18: Fix cx18_find_handle() and add error checking
cx18: Fix cx18_find_handle() and add error checking. cx18_find_handle() did
not find a good task handle and would use the invalid task handle under common
conditions. Added a define for the invalid task handle and added error checking
as well.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andy Walls [Sat, 23 Aug 2008 00:03:11 +0000 (21:03 -0300)]
V4L/DVB (8772): cx18: Convert cx18_queue buffers member to atomic_t
cx18: Convert cx18_queue buffers member to atomic_t. This allows safe
concurrent access to check if a queue has data without having to acquire the
queue spinlock.
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 22 Aug 2008 20:25:10 +0000 (17:25 -0300)]
V4L/DVB (8754): uvcvideo: Implement the USB power management reset_resume method.
When a suspended device has been reset instead of being resumed, USB core
calls the reset_resume method if available instead of unbinding and rebinding
the device.
This patch implements reset_resume by reusing the current resume
implementation and simplifies the resume method by skipping the controls
restore stage. Resuming from autosuspend should be faster.
Fix for reloading firmware when removing and reloading driver
Handshaking for firmware loading and changing modes.
Removes the restriction of one user per channel at a time.
JPEG capture mode added.
Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver sure needs some rework. For now, let's
try to clean it up a bit before start reimplementing
anything.
checkpatch.pl still not happy with this driver after
this patch, but the most annoying errors are gone,
comments now use C-style only, labels are well placed
and some other minor fixes.
Some more clean up patches will come as I work on this
driver. Please review it carefully.
Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Henk Vergonet <henk.vergonet@gmail.com>
[mchehab@infradead.org: Manually fixed some conflicts with a previous patch] Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 16 Aug 2008 10:56:12 +0000 (07:56 -0300)]
V4L/DVB (8690): tuner-3036: remove driver
This driver is for VERY old i2c-over-parallel port teletext receiver
boxes. Rather then spending effort on converting this driver to V4L2,
and since it is extremely unlikely that anyone still uses one of these
devices, it was decided to drop it (after discussing this as well with
the original author, Phil Blundell).
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Old driver for the dpc7146 demonstration board that is no longer
relevant. The last time this was tested on actual hardware was
probably around 2002. Since this is a driver for a demonstration
board the decision was made (after discussing this with the original
author, Michael Hunold) to remove it rather than spending a
lot of effort continually updating this driver to stay in sync
with the latest internal V4L2 or I2C API.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Michael Hunold <hunold@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Robert Jarzmik [Thu, 14 Aug 2008 15:02:51 +0000 (12:02 -0300)]
V4L/DVB (8684): Add support for Micron MT9M111 camera.
Adds support for Micron MT9M111 camera chip, with basic
features :
- view rectangle configurable
- some output formats (bayer8, bayer10, rgb565, rgb555, ycbycr)
- autoexposure
- only highpower mode context used (ie. context B)
projects / linux-2.6-omap-h63xx.git / log