ext4: Fix s_dirty_blocks_counter if block allocation failed with nodelalloc
With nodelalloc option we need to update the dirty block counter on
block allocation failure. This is needed because we increment the
dirty block counter early in the block allocation phase. Without
the patch s_dirty_blocks_counter goes wrong so that filesystem's
free blocks decreases incorrectly.
ext4: Init the complete page while building buddy cache
We need to init the complete page during buddy cache init
by setting the contents to '1'. Otherwise we can see the
following errors after doing an online resize of the
filesystem:
EXT4-fs error (device sdb1): ext4_mb_mark_diskspace_used:
Allocating block 1040385 in system zone of 127 group
ext4: Don't allow new groups to be added during block allocation
After we mark the blocks in the buddy cache as allocated,
we need to ensure that we don't reinit the buddy cache until
the block bitmap is updated. This commit achieves this by holding
the group_info alloc_semaphore till ext4_mb_release_context
ext4: Use new buffer_head flag to check uninit group bitmaps initialization
For uninit block group, the on-disk bitmap is not initialized. That
implies we cannot depend on the uptodate flag on the bitmap
buffer_head to find bitmap validity. Use a new buffer_head flag which
would be set after we properly initialize the bitmap. This also
prevents (re-)initializing the uninit group bitmap every time we call
ext4_read_block_bitmap().
ext4: Fix the race between read_inode_bitmap() and ext4_new_inode()
We need to make sure we update the inode bitmap and clear
EXT4_BG_INODE_UNINIT flag with sb_bgl_lock held, since
ext4_read_inode_bitmap() looks at EXT4_BG_INODE_UNINIT to decide
whether to initialize the inode bitmap each time it is called.
(introduced by commit c806e68f.)
and ext4_new_inode does
if (!ext4_set_bit_atomic(sb_bgl_lock(sbi, group),
ino, inode_bitmap_bh->b_data))
......
...
spin_lock(sb_bgl_lock(sbi, group));
gdp->bg_flags &= cpu_to_le16(~EXT4_BG_INODE_UNINIT);
i.e., on allocation we update the bitmap then we take the sb_bgl_lock
and clear the EXT4_BG_INODE_UNINIT flag. What can happen is a
parallel ext4_read_inode_bitmap can zero out the bitmap in between
the above ext4_set_bit_atomic and spin_lock(sb_bg_lock..)
The race results in below user visible errors
EXT4-fs error (device sdb1): ext4_free_inode: bit already cleared for inode 168449
EXT4-fs warning (device sdb1): ext4_unlink: Deleting nonexistent file ...
EXT4-fs warning (device sdb1): ext4_rmdir: empty directory has too many links ...
# ls -al /mnt/tmp/f/p369/d3/d6/d39/db2/dee/d10f/d3f/l71
ls: /mnt/tmp/f/p369/d3/d6/d39/db2/dee/d10f/d3f/l71: Stale NFS file handle
ext4: Fix race between read_block_bitmap() and mark_diskspace_used()
We need to make sure we update the block bitmap and clear
EXT4_BG_BLOCK_UNINIT flag with sb_bgl_lock held, since
ext4_read_block_bitmap() looks at EXT4_BG_BLOCK_UNINIT to decide
whether to initialize the block bitmap each time it is called
(introduced by commit c806e68f), and this can race with block
allocations in ext4_mb_mark_diskspace_used().
ie on allocation we update the bitmap then we take the sb_bgl_lock
and clear the EXT4_BG_BLOCK_UNINIT flag. What can happen is a
parallel ext4_read_block_bitmap can zero out the bitmap in between
the above mb_set_bits and spin_lock(sb_bg_lock..)
The race results in below user visible errors
EXT4-fs error (device sdb1): ext4_mb_release_inode_pa: free 100, pa_free 105
EXT4-fs error (device sdb1): mb_free_blocks: double-free of inode 0's block ..
ext4: fix BUG when calling ext4_error with locked block group
The mballoc code likes to call ext4_error while it is holding locked
block groups. This can causes a scheduling in atomic context BUG. We
can't just unlock the block group and relock it after/if ext4_error
returns since that might result in race conditions in the case where
the filesystem is set to continue after finding errors.
In ext4_mb_init_group(), if the filesystem block size is less than
PAGE_SIZE/2, the code tries to grab alloc_sem for multiple block
groups in a loop. We need to allow for this by using
down_write_nested() and passing in the loop index as a lock subclass
number. This works because no other code path needs to take multiple
alloc_sem's. Note that lockdep will fail for filesystem blocksize
smaller than to PAGE_SIZE/16k. (e.g., a 1k filesystem blocksize with
a 32k page size, or a 2k filesystem blocksize with a 64k blocksize,
etc.)
ext4: don't use blocks freed but not yet committed in buddy cache init
When we generate buddy cache (especially during resize) we need to
make sure we don't use the blocks freed but not yet comitted. This
makes sure we have the right value of free blocks count in the group
info and also in the bitmap. This also ensures the ordered mode
consistency
jbd2: Call journal commit callback without holding j_list_lock
Avoid freeing the transaction in __jbd2_journal_drop_transaction() so
the journal commit callback can run without holding j_list_lock, to
avoid lock contention on this spinlock.
Move some of the forward declaration of the static functions
to mballoc.c where they are used. This enables us to include
mballoc.h in other .c files. Also correct the buddy cache
documentation.
ext4: Use EXT4_GROUP_INFO_NEED_INIT_BIT during resize
The new groups added during resize are flagged as
need_init group. Make sure we properly initialize these
groups. When we have block size < page size and we are adding
new groups the page may still be marked uptodate even though
we haven't initialized the group. While forcing the init
of buddy cache we need to make sure other groups part of the
same page of buddy cache is not using the cache.
group_info->alloc_sem is added to ensure the same.
With this change new blocks added during resize
are marked as free in the block bitmap and the
group is flagged with EXT4_GROUP_INFO_NEED_INIT_BIT
flag. This makes sure when mballoc tries to allocate
blocks from the new group we would reload the
buddy information using the bitmap present in the disk.
* Change EXT4_HAS_*_FEATURE to return a boolean
* Add a function prototype for ext4_fiemap() in ext4.h
* Make ext4_ext_fiemap_cb() and ext4_xattr_fiemap() be static functions
* Add lock annotations to mb_free_blocks()
Theodore Ts'o [Wed, 5 Nov 2008 05:09:22 +0000 (00:09 -0500)]
jbd2: Remove a large array of bh's from the stack of the checkpoint routine
jbd2_log_do_checkpoint()n is one of the kernel's largest stack users.
Move the array of buffer head's from the stack of jbd2_log_do_checkpoint()
to the in-core journal structure.
Theodore Ts'o [Wed, 5 Nov 2008 05:14:04 +0000 (00:14 -0500)]
ext4: Change unsigned long to unsigned int
Convert the unsigned longs that are most responsible for bloating the
stack usage on 64-bit systems.
Nearly all places in the ext3/4 code which uses "unsigned long" is
probably a bug, since on 32-bit systems a ulong a 32-bits, which means
we are wasting stack space on 64-bit systems.
Theodore Ts'o [Tue, 6 Jan 2009 03:18:16 +0000 (22:18 -0500)]
ext4: Make ext4_group_t be an unsigned int
Nearly all places in the ext3/4 code which uses "unsigned long" is
probably a bug, since on 32-bit systems a ulong a 32-bits, which means
we are wasting stack space on 64-bit systems.
Theodore Ts'o [Sun, 4 Jan 2009 01:27:38 +0000 (20:27 -0500)]
ext4: add fsync batch tuning knobs
Add new mount options, min_batch_time and max_batch_time, which
controls how long the jbd2 layer should wait for additional filesystem
operations to get batched with a synchronous write transaction.
Josef Bacik [Wed, 26 Nov 2008 06:14:26 +0000 (01:14 -0500)]
jbd2: improve jbd2 fsync batching
This patch removes the static sleep time in favor of a more self
optimizing approach where we measure the average amount of time it
takes to commit a transaction to disk and the ammount of time a
transaction has been running. If somebody does a sync write or an
fsync() traditionally we would sleep for 1 jiffies, which depending on
the value of HZ could be a significant amount of time compared to how
long it takes to commit a transaction to the underlying storage. With
this patch instead of sleeping for a jiffie, we check to see if the
amount of time this transaction has been running is less than the
average commit time, and if it is we sleep for the delta using
schedule_hrtimeout to give us a higher precision sleep time. This
greatly benefits high end storage where you could end up sleeping for
longer than it takes to commit the transaction and therefore sitting
idle instead of allowing the transaction to be committed by keeping
the sleep time to a minimum so you are sure to always be doing
something.
Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We can call ext4_mb_check_limits even after successfully allocating
the requested blocks. In that case, make sure we don't overwrite
ac_status if it already has the status AC_STATUS_FOUND. This fixes
the lockdep warning:
=============================================
[ INFO: possible recursive locking detected ]
2.6.28-rc6-autokern1 #1
---------------------------------------------
fsstress/11948 is trying to acquire lock:
(&meta_group_info[i]->alloc_sem){----}, at: [<c04d9a49>] ext4_mb_load_buddy+0x9f/0x278
.....
Theodore Ts'o [Tue, 6 Jan 2009 02:34:13 +0000 (21:34 -0500)]
jbd2: Add barrier not supported test to journal_wait_on_commit_record
Xen doesn't report that barriers are not supported until buffer I/O is
reported as completed, instead of when the buffer I/O is submitted.
Add a check and a fallback codepath to journal_wait_on_commit_record()
to detect this case, so that attempts to mount ext4 filesystems on
LVM/devicemapper devices on Xen guests don't blow up with an "Aborting
journal on device XXX"; "Remounting filesystem read-only" error.
Thanks to Andreas Sundstrom for reporting this issue.
Frank Mayhar [Wed, 7 Jan 2009 05:06:22 +0000 (00:06 -0500)]
ext4: Allow ext4 to run without a journal
A few weeks ago I posted a patch for discussion that allowed ext4 to run
without a journal. Since that time I've integrated the excellent
comments from Andreas and fixed several serious bugs. We're currently
running with this patch and generating some performance numbers against
both ext2 (with backported reservations code) and ext4 with and without
a journal. It just so happens that running without a journal is
slightly faster for most everything.
We did
iozone -T -t 4 s 2g -r 256k -T -I -i0 -i1 -i2
which creates 4 threads, each of which create and do reads and writes on
a 2G file, with a buffer size of 256K, using O_DIRECT for all file opens
to bypass the page cache. Results:
Yasunori Goto [Wed, 17 Dec 2008 05:48:39 +0000 (00:48 -0500)]
ext4: Widen type of ext4_sb_info.s_mb_maxs[]
I chased the cause of following ext4 oops report which is tested on
ia64 box.
http://bugzilla.kernel.org/show_bug.cgi?id=12018
The cause is the size of s_mb_maxs array that is defined as "unsigned
short" in ext4_sb_info structure. If the file system's block size is
8k or greater, an unsigned short is not wide enough to contain the
value fs->blocksize << 3.
ext4: When resizing set the EXT4_BG_INODE_ZEROED flag for new block groups
The inode table has been zeroed in setup_new_group_blocks(). Mark it as
such in ext4_group_add(). Since we are currently clearing inode table
for the new block group, we should set the EXT4_BG_INODE_ZEROED flag.
If at some point in the future we don't immediately zero out the inode
table as part of the resize operation, then obviously we shouldn't do
this.
ext4: Fix the delalloc writepages to allocate blocks at the right offset.
When iterating through the pages which have mapped buffer_heads, we
failed to update the b_state value. This results in allocating blocks
at logical offset 0.
Theodore Ts'o [Wed, 5 Nov 2008 14:22:24 +0000 (09:22 -0500)]
ext4: tone down ext4_da_writepages warnings
If the filesystem has errors, ext4_da_writepages() will return a *lot*
of errors, including lots and lots of stack dumps. While it's true
that we are dropping user data on the floor, which is unfortunate, the
stack dumps aren't helpful, and they tend to obscure the true original
root cause of the problem. So in the case where the filesystem has
aborted, return an EROFS right away.
Theodore Ts'o [Fri, 12 Dec 2008 17:41:28 +0000 (12:41 -0500)]
ext4: remove do_blk_alloc()
The convenience function do_blk_alloc() is a static function with only
one caller, so fold it into ext4_new_meta_blocks() to simplify the
code and to make it easier to understand.
To save more stack space, if count is a null pointer in
ext4_new_meta_blocks() assume that caller wanted a single block (and
if there is an error, no blocks were allocated).
Theodore Ts'o [Sun, 7 Dec 2008 19:10:54 +0000 (14:10 -0500)]
ext4: remove ext4_new_meta_block()
There were only two one callers of the function ext4_new_meta_block(),
which just a very simpler wrapper function around
ext4_new_meta_blocks(). Change those two functions to call
ext4_new_meta_blocks() directly, to save code and stack space usage.
Theodore Ts'o [Fri, 2 Jan 2009 04:59:43 +0000 (23:59 -0500)]
ext4: remove ext4_new_blocks() and call ext4_mb_new_blocks() directly
There was only one caller of the compatibility function
ext4_new_blocks(), in balloc.c's ext4_alloc_blocks(). Change it to
call ext4_mb_new_blocks() directly, and remove ext4_new_blocks()
altogether. This cleans up the code, by removing two extra functions
from the call chain, and hopefully saving some stack usage.
Theodore Ts'o [Sat, 6 Dec 2008 21:58:39 +0000 (16:58 -0500)]
ext3/4: Fix loop index in do_split() so it is signed
This fixes a gcc warning but it doesn't appear able to result in a
failure, since the primary way the loop is exited is the first
conditional in the for loop, and at least for a consistent filesystem,
the signed/unsigned should in practice never be exposed.
Theodore Ts'o [Tue, 28 Oct 2008 17:21:44 +0000 (13:21 -0400)]
ext4: Add support for non-native signed/unsigned htree hash algorithms
The original ext3 hash algorithms assumed that variables of type char
were signed, as God and K&R intended. Unfortunately, this assumption
is not true on some architectures. Userspace support for marking
filesystems with non-native signed/unsigned chars was added two years
ago, but the kernel-side support was never added (until now).
Theodore Ts'o [Tue, 28 Oct 2008 17:21:55 +0000 (13:21 -0400)]
ext3: Add support for non-native signed/unsigned htree hash algorithms
The original ext3 hash algorithms assumed that variables of type char
were signed, as God and K&R intended. Unfortunately, this assumption
is not true on some architectures. Userspace support for marking
filesystems with non-native signed/unsigned chars was added two years
ago, but the kernel-side support was never added (until now).
fs/ext4/balloc.c:607: warning: format '%lld' expects type 'long long int', but argument 2 has type 's64'
fs/ext4/inode.c:1822: warning: format '%lld' expects type 'long long int', but argument 2 has type 's64'
fs/ext4/inode.c:1824: warning: format '%lld' expects type 'long long int', but argument 2 has type 's64'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Mon, 5 Jan 2009 00:32:11 +0000 (16:32 -0800)]
Merge branch 'audit.b61' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current
* 'audit.b61' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
audit: validate comparison operations, store them in sane form
clean up audit_rule_{add,del} a bit
make sure that filterkey of task,always rules is reported
audit rules ordering, part 2
fixing audit rule ordering mess, part 1
audit_update_lsm_rules() misses the audit_inode_hash[] ones
sanitize audit_log_capset()
sanitize audit_fd_pair()
sanitize audit_mq_open()
sanitize AUDIT_MQ_SENDRECV
sanitize audit_mq_notify()
sanitize audit_mq_getsetattr()
sanitize audit_ipc_set_perm()
sanitize audit_ipc_obj()
sanitize audit_socketcall
don't reallocate buffer in every audit_sockaddr()
Nick Piggin [Sun, 4 Jan 2009 20:00:53 +0000 (12:00 -0800)]
fs: symlink write_begin allocation context fix
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened. They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim. This bug could
cause filesystem deadlocks.
The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called. It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock. The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.
Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on
this flag in their write_begin function. Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).
This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a
random example).
[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: Nick Piggin <npiggin@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
untouched to the grab_cache_page_write_begin() function. That
just simplifies everybody, and may even allow future expansion of the
logic. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bruno Prémont [Sun, 4 Jan 2009 21:11:54 +0000 (13:11 -0800)]
viafb: fix crashes due to 4k stack overflow
The function viafb_cursor() uses 2 stack-variables of CURSOR_SIZE bits;
CURSOR_SIZE is defined as (8 * 1024). Using up twice 1k on stack is too
much for 4k-stack (though it works with 8k-stacks). Make those two
variables kzalloc'ed to preserve stack space.
Also merge the whole lot of local struct's in viafb_ioctl into a union so
the stack usage gets minimized here as well. (struct's are only accessed
in their indicidual IOCTL case) This second part is only compile-tested as
I know of no userspace app using the IOCTLs.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Cc: <JosephChan@via.com.tw> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pekka Enberg [Sun, 4 Jan 2009 20:00:48 +0000 (12:00 -0800)]
fs: introduce bgl_lock_ptr()
As suggested by Andreas Dilger, introduce a bgl_lock_ptr() helper in
<linux/blockgroup_lock.h> and add separate sb_bgl_lock() helpers to
filesystem specific header files to break the hidden dependency to
struct ext[234]_sb_info.
Also, while at it, convert the macros to static inlines to try make up
for all the times I broke Andrew Morton's tree.
Acked-by: Andreas Dilger <adilger@sun.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sun, 4 Jan 2009 20:00:47 +0000 (12:00 -0800)]
spi.h uses/needs device.h
Include header files as used/needed:
In file included from drivers/leds/leds-dac124s085.c:16:
include/linux/spi/spi.h:66: error: field 'dev' has incomplete type
include/linux/spi/spi.h: In function 'to_spi_device':
include/linux/spi/spi.h:100: warning: type defaults to 'int' in declaration of '__mptr'
...
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Sun, 4 Jan 2009 20:00:45 +0000 (12:00 -0800)]
cgroups: fix a race between cgroup_clone and umount
The race is calling cgroup_clone() while umounting the ns cgroup subsys,
and thus cgroup_clone() might access invalid cgroup_fs, or kill_sb() is
called after cgroup_clone() created a new dir in it.
The BUG I triggered is BUG_ON(root->number_of_cgroups != 1);
Al Viro [Tue, 16 Dec 2008 10:59:26 +0000 (05:59 -0500)]
audit: validate comparison operations, store them in sane form
Don't store the field->op in the messy (and very inconvenient for e.g.
audit_comparator()) form; translate to dense set of values and do full
validation of userland-submitted value while we are at it.
->audit_init_rule() and ->audit_match_rule() get new values now; in-tree
instances updated.
Al Viro [Mon, 15 Dec 2008 06:17:50 +0000 (01:17 -0500)]
audit rules ordering, part 2
Fix the actual rule listing; add per-type lists _not_ used for matching,
with all exit,... sitting on one such list. Simplifies "do something
for all rules" logics, while we are at it...
Al Viro [Mon, 15 Dec 2008 04:45:27 +0000 (23:45 -0500)]
fixing audit rule ordering mess, part 1
Problem: ordering between the rules on exit chain is currently lost;
all watch and inode rules are listed after everything else _and_
exit,never on one kind doesn't stop exit,always on another from
being matched.
Solution: assign priorities to rules, keep track of the current
highest-priority matching rule and its result (always/never).
Al Viro [Sun, 14 Dec 2008 08:46:48 +0000 (03:46 -0500)]
sanitize AUDIT_MQ_SENDRECV
* logging the original value of *msg_prio in mq_timedreceive(2)
is insane - the argument is write-only (i.e. syscall always
ignores the original value and only overwrites it).
* merge __audit_mq_timed{send,receive}
* don't do copy_from_user() twice
* don't mess with allocations in auditsc part
* ... and don't bother checking !audit_enabled and !context in there -
we'd already checked for audit_dummy_context().
Linus Torvalds [Sat, 3 Jan 2009 20:04:39 +0000 (12:04 -0800)]
Merge branch 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits)
x86: setup_per_cpu_areas() cleanup
cpumask: fix compile error when CONFIG_NR_CPUS is not defined
cpumask: use alloc_cpumask_var_node where appropriate
cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
x86: use cpumask_var_t in acpi/boot.c
x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids
sched: put back some stack hog changes that were undone in kernel/sched.c
x86: enable cpus display of kernel_max and offlined cpus
ia64: cpumask fix for is_affinity_mask_valid()
cpumask: convert RCU implementations, fix
xtensa: define __fls
mn10300: define __fls
m32r: define __fls
h8300: define __fls
frv: define __fls
cris: define __fls
cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
cpumask: zero extra bits in alloc_cpumask_var_node
cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/
cpumask: convert mm/
...
Linus Torvalds [Sat, 3 Jan 2009 20:02:18 +0000 (12:02 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (34 commits)
V4L/DVB (10173): Missing v4l2_prio_close in radio_release
V4L/DVB (10172): add DVB_DEVICE_TYPE= to uevent
V4L/DVB (10171): Use usb_set_intfdata
V4L/DVB (10170): tuner-simple: prevent possible OOPS caused by divide by zero error
V4L/DVB (10168): sms1xxx: fix inverted gpio for lna control on tiger r2
V4L/DVB (10167): sms1xxx: add support for inverted gpio
V4L/DVB (10166): dvb frontend: stop using non-C99 compliant comments
V4L/DVB (10165): Add FE_CAN_2G_MODULATION flag to frontends that support DVB-S2
V4L/DVB (10164): Add missing S2 caps flag to S2API
V4L/DVB (10163): em28xx: allocate adev together with struct em28xx dev
V4L/DVB (10162): tuner-simple: Fix tuner type set message
V4L/DVB (10161): saa7134: fix autodetection for AVer TV GO 007 FM Plus
V4L/DVB (10160): em28xx: update chip id for em2710
V4L/DVB (10157): Add USB ID for the Sil4701 radio from DealExtreme
V4L/DVB (10156): saa7134: Add support for Avermedia AVer TV GO 007 FM Plus
V4L/DVB (10155): Add TEA5764 radio driver
V4L/DVB (10154): saa7134: fix a merge conflict on Behold H6 board
V4L/DVB (10153): Add the Beholder H6 card to DVB-T part of sources.
V4L/DVB (10152): Change configuration of the Beholder H6 card
V4L/DVB (10151): Fix I2C bridge error in zl10353
...
Linus Torvalds [Sat, 3 Jan 2009 20:00:07 +0000 (12:00 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
mmc: warn about voltage mismatches
mmc_spi: Add support for OpenFirmware bindings
pxamci: fix dma_unmap_sg length
mmc_block: ensure all sectors that do not have errors are read
drivers/mmc: Move a dereference below a NULL test
sdhci: handle built-in sdhci with modular leds class
mmc: balanc pci_iomap with pci_iounmap
mmc_block: print better error messages
mmc: Add mmc_vddrange_to_ocrmask() helper function
ricoh_mmc: Handle newer models of Ricoh controllers
mmc: Add 8-bit bus width support
sdhci: activate led support also when module
mmc: trivial annotation of 'blocks'
pci: use pci_ioremap_bar() in drivers/mmc
sdricoh_cs: Add support for Bay Controller devices
mmc: at91_mci: reorder timer setup and mmc_add_host() call
Linus Torvalds [Sat, 3 Jan 2009 19:46:17 +0000 (11:46 -0800)]
Make %p print '(null)' for NULL pointers
Before, when we only ever printed out the pointer value itself, a NULL
pointer would never cause issues and might as well be printed out as
just its numeric value.
However, with the extended %p formats, especially %pR, we might validly
want to print out resources for debugging. And sometimes they don't
even exist, and the resource pointer is just NULL. Print it out as
such, rather than oopsing.
This is a more generic version of a patch done by Trent Piepho (catching
all %p cases rather than just %pR, and using "(null)" instead of
"[NULL]" to match glibc).
Al Viro [Sat, 3 Jan 2009 07:16:23 +0000 (07:16 +0000)]
sanitize ifdefs in binfmt_aout
They are actually alpha vs. i386/arm/m68k i.e. ecoff vs. aout.
In the only place where we actually tried to handle arm and i386/m68k in
different ways (START_DATA() in coredump handling), the arm variant
works for all of them (i386 and m68k have u.start_code set to 0).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Travis [Thu, 1 Jan 2009 02:08:47 +0000 (18:08 -0800)]
cpumask: use alloc_cpumask_var_node where appropriate
Impact: Reduce inter-node memory traffic.
Reduces inter-node memory traffic (offloading the global system bus)
by allocating referenced struct cpumasks on the same node as the
referring struct.
Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rusty Russell [Thu, 1 Jan 2009 02:08:47 +0000 (18:08 -0800)]
cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
Impact: Reduce memory usage, use new API.
This is part of an effort to reduce structure sizes for machines
configured with large NR_CPUS. cpumask_t gets replaced by
cpumask_var_t, which is either struct cpumask[1] (small NR_CPUS) or
struct cpumask * (large NR_CPUS).
(Changes to powernow-k* by <travis>.)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mike Travis [Thu, 1 Jan 2009 02:08:45 +0000 (18:08 -0800)]
sched: put back some stack hog changes that were undone in kernel/sched.c
Impact: prevents panic from stack overflow on numa-capable machines.
Some of the "removal of stack hogs" changes in kernel/sched.c by using
node_to_cpumask_ptr were undone by the early cpumask API updates, and
causes a panic due to stack overflow. This patch undoes those changes
by using cpumask_of_node() which returns a 'const struct cpumask *'.
In addition, cpu_coregoup_map is replaced with cpu_coregroup_mask further
reducing stack usage. (Both of these updates removed 9 FIXME's!)
Also:
Pick up some remaining changes from the old 'cpumask_t' functions to
the new 'struct cpumask *' functions.
Optimize memory traffic by allocating each percpu local_cpu_mask on the
same node as the referring cpu.
Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Sat, 3 Jan 2009 11:50:46 +0000 (12:50 +0100)]
ia64: cpumask fix for is_affinity_mask_valid()
Impact: build fix on ia64
ia64's default_affinity_write() still had old cpumask_t usage:
/home/mingo/tip/kernel/irq/proc.c: In function `default_affinity_write':
/home/mingo/tip/kernel/irq/proc.c:114: error: incompatible type for argument 1 of `is_affinity_mask_valid'
make[3]: *** [kernel/irq/proc.o] Error 1
make[3]: *** Waiting for unfinished jobs....
Ingo Molnar [Sat, 3 Jan 2009 12:16:09 +0000 (13:16 +0100)]
cpumask: convert RCU implementations, fix
Impact: cleanup
This warning:
kernel/rcuclassic.c: In function ‘rcu_start_batch’:
kernel/rcuclassic.c:397: warning: passing argument 1 of ‘cpumask_andnot’ from incompatible pointer type
triggers because one usage site of rcp->cpumask was not converted
to to_cpumask(rcp->cpumask). There's no ill effects of this bug.
projects / linux-2.6-omap-h63xx.git / log