Pekka Paalanen [Mon, 12 May 2008 19:21:03 +0000 (21:21 +0200)]
x86 mmiotrace: fix page-unaligned ioremaps
mmiotrace_ioremap() expects to receive the original unaligned map phys address
and size. Also fix {un,}register_kmmio_probe() to deal properly with
unaligned size.
Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Randy Dunlap [Mon, 12 May 2008 19:20:59 +0000 (21:20 +0200)]
x86/mmiotrace: uses/depends on PCI
Don't try to build mmiotrace when CONFIG_PCI=n.
next-20080416/kernel/trace/trace_mmiotrace.c: In function 'mmio_print_pcidev':
next-20080416/kernel/trace/trace_mmiotrace.c:62: error: implicit declaration of function 'pci_dev_driver'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Randy Dunlap [Mon, 12 May 2008 19:20:59 +0000 (21:20 +0200)]
mmiotrace: fix printk format
Fix gcc printk format warnings:
next-20080415/arch/x86/mm/mmio-mod.c: In function 'print_pte':
next-20080415/arch/x86/mm/mmio-mod.c:154: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'pteval_t'
next-20080415/arch/x86/mm/mmio-mod.c:154: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'pteval_t'
next-20080415/arch/x86/mm/mmio-mod.c: At top level:
next-20080415/arch/x86/mm/mmio-mod.c:403: warning: 'downed_cpus' defined but not used
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pekka Paalanen [Mon, 12 May 2008 19:20:58 +0000 (21:20 +0200)]
ftrace: mmiotrace update, #2
another weekend, another patch. This should apply on top of my previous patch
from March 23rd.
Summary of changes:
- Print PCI device list in output header
- work around recursive probe hits on SMP
- refactor dis/arm_kmmio_fault_page() and add check for page levels
- remove un/reference_kmmio(), the die notifier hook is registered
permanently into the list
- explicitly check for single stepping in die notifier callback
I have tested this version on my UP Athlon64 desktop with Nouveau, and
SMP Core 2 Duo laptop with the proprietary nvidia driver. Both systems
are 64-bit. One previously unknown bug crept into daylight: the ftrace
framework's output routines print the first entry last after buffer has
wrapped around.
The most important regressions compared to non-ftrace mmiotrace at this
time are:
- failure of trace_pipe file
- illegal lines in output file
- unaware of losing data due to buffer full
Personally I'd like to see these three solved before submitting to
mainline. Other issues may come up once we know when we lose events.
Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pekka Paalanen [Mon, 12 May 2008 19:20:57 +0000 (21:20 +0200)]
ftrace: mmiotrace, updates
here is a patch that makes mmiotrace work almost well within the tracing
framework. The patch applies on top of my previous patch. I have my own
output formatting in place now.
Summary of changes:
- fix the NULL dereference that was due to not calling tracing_reset()
- add print_line() callback into struct tracer
- implement print_line() for mmiotrace, producing up-to-spec text
- add my output header, but that is not really called in the right place
- rewrote the main structs in mmiotrace
- added two new trace entry types: TRACE_MMIO_RW and TRACE_MMIO_MAP
- made some functions in trace.c non-static
- check current==NULL in tracing_generic_entry_update()
- fix(?) comparison in trace_seq_printf()
Things seem to work fine except a few issues. Markers (text lines injected
into mmiotrace log) are missing, I did not feel hacking them in before we
have variable length entries. My output header is printed only for 'trace'
file, but not 'trace_pipe'. For some reason, despite my quick fix,
iter->trace is NULL in print_trace_line() when called from 'trace_pipe'
file, which means I don't get proper output formatting.
I only tried by loading nouveau.ko, which just detects the card, and that
is traced fine. I didn't try further. Map, two reads and unmap. Works
perfectly.
I am missing the information about overflows, I'd prefer to have a
counter for lost events. I didn't try, but I guess currently there is no
way of knowning when it overflows?
So, not too far from being fully operational, it seems :-)
And looking at the diffstat, there also is some 700-900 lines of user space
code that just became obsolete.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pekka Paalanen [Mon, 12 May 2008 19:20:57 +0000 (21:20 +0200)]
ftrace: add mmiotrace plugin
On Sat, 22 Mar 2008 13:07:47 +0100
Ingo Molnar <mingo@elte.hu> wrote:
> > > i'd suggest the following: pull x86.git and sched-devel.git into a
> > > single tree [the two will combine without rejects]. Then try to add a
> > > kernel/tracing/trace_mmiotrace.c ftrace plugin. The trace_sysprof.c
> > > plugin might be a good example.
> >
> > I did this and now I have mmiotrace enabled/disabled via the tracing
> > framework (what do we call this, since ftrace is one of the tracers?).
>
> cool! could you send the patches for that? (even if they are not fully
> functional yet)
Patch attached in the end. Nice to see how much code disappeared. I tried
to mark all the features I had to break with XXX-comments.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pekka Paalanen [Mon, 12 May 2008 19:20:57 +0000 (21:20 +0200)]
x86: mmiotrace, preview 2
Kconfig.debug, Makefile and testmmiotrace.c style fixes.
Use real mutex instead of mutex.
Fix failure path in register probe func.
kmmio: RCU read-locked over single stepping.
Generate mapping id's.
Make mmio-mod.c built-in and rewrite its locking.
Add debugfs file to enable/disable mmiotracing.
kmmio: use irqsave spinlocks.
Lots of cleanups in mmio-mod.c
Marker file moved from /proc into debugfs.
Call mmiotrace entrypoints directly from ioremap.c.
Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pekka Paalanen [Mon, 12 May 2008 19:20:57 +0000 (21:20 +0200)]
x86: mmiotrace full patch, preview 1
kmmio.c handles the list of mmio probes with callbacks, list of traced
pages, and attaching into the page fault handler and die notifier. It
arms, traps and disarms the given pages, this is the core of mmiotrace.
mmio-mod.c is a user interface, hooking into ioremap functions and
registering the mmio probes. It also decodes the required information
from trapped mmio accesses via the pre and post callbacks in each probe.
Currently, hooking into ioremap functions works by redefining the symbols
of the target (binary) kernel module, so that it calls the traced
versions of the functions.
The most notable changes done since the last discussion are:
- kmmio.c is a built-in, not part of the module
- direct call from fault.c to kmmio.c, removing all dynamic hooks
- prepare for unregistering probes at any time
- make kmmio re-initializable and accessible to more than one user
- rewrite kmmio locking to remove all spinlocks from page fault path
Can I abuse call_rcu() like I do in kmmio.c:unregister_kmmio_probe()
or is there a better way?
The function called via call_rcu() itself calls call_rcu() again,
will this work or break? There I need a second grace period for RCU
after the first grace period for page faults.
Mmiotrace itself (mmio-mod.c) is still a module, I am going to attack
that next. At some point I will start looking into how to make mmiotrace
a tracer component of ftrace (thanks for the hint, Ingo). Ftrace should
make the user space part of mmiotracing as simple as
'cat /debug/trace/mmio > dump.txt'.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pekka Paalanen [Mon, 12 May 2008 19:20:57 +0000 (21:20 +0200)]
x86: explicit call to mmiotrace in do_page_fault()
The custom page fault handler list is replaced with a single function
pointer. All related functions and variables are renamed for
mmiotrace.
Signed-off-by: Pekka Paalanen <pq@iki.fi> Cc: Christoph Hellwig <hch@infradead.org> Cc: Arjan van de Ven <arjan@infradead.org> Cc: pq@iki.fi Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pekka Paalanen [Mon, 12 May 2008 19:20:56 +0000 (21:20 +0200)]
x86 mmiotrace: fix relay-buffer-full flag for SMP
Relay has per-cpu buffers, but mmiotrace was using only a single flag
for detecting buffer full/not-full transitions. The new code makes
this per-cpu and actually counts missed events.
Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pekka Paalanen [Mon, 12 May 2008 19:20:56 +0000 (21:20 +0200)]
x86 mmiotrace: use lookup_address()
Use lookup_address() from pageattr.c instead of doing the same
manually. Also had to EXPORT_SYMBOL_GPL(lookup_address) to make this
work for modules. This also fixes "undefined symbol 'init_mm'"
compile error for x86_32.
Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pekka Paalanen [Mon, 12 May 2008 19:20:56 +0000 (21:20 +0200)]
x86: mmiotrace - trace memory mapped IO
Mmiotrace is a tool for trapping memory mapped IO (MMIO) accesses within
the kernel. It is used for debugging and especially for reverse
engineering evil binary drivers.
Mmiotrace works by wrapping the ioremap family of kernel functions and
marking the returned pages as not present. Access to the IO memory
triggers a page fault, which will be handled by mmiotrace's custom page
fault handler. This will single-step the faulted instruction with the
MMIO page marked as present. Access logs are directed to user space via
relay and debug_fs.
This page fault approach is necessary, because binary drivers have
readl/writel etc. calls inlined and therefore extremely difficult to
trap with with e.g. kprobes.
This patch depends on the custom page fault handlers patch.
Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Sat, 17 May 2008 04:01:36 +0000 (00:01 -0400)]
ftrace: add have dynamic ftrace config for archs
Now that ftrace is being ported to other architectures, it has become
apparent that DYNAMIC_FTRACE is dependent on whether or not that
architecture implements dynamic ftrace. FTRACE itself may be ported to
an architecture without porting dynamic ftrace.
This patch adds HAVE_DYNAMIC_FTRACE to allow architectures to port ftrace
without having to also port the dynamic aspect as well.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Thu, 15 May 2008 01:30:29 +0000 (21:30 -0400)]
kbuild: create new CFLAGS_REMOVE_(basename).o option
We currently have a way to add special CFLAGS to code, but we do not have a
way to remove them if needed.
With the case of ftrace, some files should simply not be profiled. Adding
the -pg flag to these files is simply a waste, and adding "notrace" to each
and every function is ugly.
Currently we put in "Makefile turd" [1] to stop the compiler from adding -pg
to certain files. This was clumsy and awkward.
This patch now adds the revese of CFLAGS_(basename).o with
CFLAGS_REMOVE_(basename).o. This allows developers to prevent certain
CFLAGS from being used to compile files. For example, we can now do
CFLAGS_REMOVE_string.o = -pg
to remove the -pg option from the string.o file in the lib directory.
Note: a space delimited list of options may be added to the REMOVE macro.
[1] - what David Miller called the workaronud to remove -pg
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ingo Molnar [Wed, 14 May 2008 06:10:31 +0000 (08:10 +0200)]
ftrace: fix mcount export bug
David S. Miller noticed the following bug: the -pg instrumentation
function callback is named differently on each platform. On x86 it
is mcount, on sparc it is _mcount. So the export does not make sense
in kernel/trace/ftrace.c - move it to x86.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
David Miller [Wed, 14 May 2008 05:06:56 +0000 (22:06 -0700)]
ftrace: remove packed attribute on ftrace_page.
It causes unaligned access traps on platforms like sparc
(ftrace_page may be marked packed, but once we return
a dyn_ftrace sub-object from this array to another piece
of code, the "packed" part of the typing information doesn't
propagate).
But also, it didn't serve any purpose either. Even if packed,
on 64-bit or 32-bit, it didn't give us any more dyn_ftrace
entries per-page.
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To support the forthcoming "immediate values" marker optimization, we must have
a way to declare markers in few code paths that does not use instruction
modification based enable. This will be the case of printk(), some traps and
eventually lockdep instrumentation.
Changelog :
- Fix reversed boolean logic of "generic".
> Not in this patch, but I noticed:
>
> #define __trace_mark(name, call_private, format, args...) \
> do { \
> static const char __mstrtab_##name[] \
> __attribute__((section("__markers_strings"))) \
> = #name "\0" format; \
> static struct marker __mark_##name \
> __attribute__((section("__markers"), aligned(8))) = \
> { __mstrtab_##name, &__mstrtab_##name[sizeof(#name)], \
> 0, 0, marker_probe_cb, \
> { __mark_empty_function, NULL}, NULL }; \
> __mark_check_format(format, ## args); \
> if (unlikely(__mark_##name.state)) { \
> (*__mark_##name.call) \
> (&__mark_##name, call_private, \
> format, ## args); \
> } \
> } while (0)
>
> In this call:
>
> (*__mark_##name.call) \
> (&__mark_##name, call_private, \
> format, ## args); \
>
> you make gcc allocate duplicate format string. You can use
> &__mstrtab_##name[sizeof(#name)] instead since it holds the same string,
> or drop ", format," above and "const char *fmt" from here:
>
> void (*call)(const struct marker *mdata, /* Probe wrapper */
> void *call_private, const char *fmt, ...);
>
> since mdata->format is the same and all callees which need it can take it there.
Very good point. I actually thought about dropping it, since it would
remove an unnecessary argument from the stack. And actually, since I now
have the marker_probe_cb sitting between the marker site and the
callbacks, there is no API change required. Thanks :)
Steven Rostedt [Mon, 12 May 2008 19:21:04 +0000 (21:21 +0200)]
ftrace: limit trace entries
Currently there is no protection from the root user to use up all of
memory for trace buffers. If the root user allocates too many entries,
the OOM killer might start kill off all tasks.
This patch adds an algorith to check the following condition:
Pekka Paalanen [Mon, 12 May 2008 19:21:02 +0000 (21:21 +0200)]
ftrace: add readpos to struct trace_seq; add trace_seq_to_user()
Refactor code from tracing_read_pipe() and create trace_seq_to_user().
Moved trace_seq_reset() call before iter->trace->read() call so that
when all leftover data is returned, trace_seq is reset automatically.
Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:21:02 +0000 (21:21 +0200)]
ftrace: use raw_smp_processor_id for mcount functions
Due to debug hooks in the kernel that can change the way smp_processor_id
works, use raw_smp_processor_id in mcount called functions (namely
ftrace_record_ip). Currently we annotate most debug functions from calling
mcount, but we should not rely on that to prevent kernel lockups.
This patch uses the raw_smp_processor_id to prevent a recusive crash
that can happen if a debug hook in smp_processor_id calls mcount.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:21:01 +0000 (21:21 +0200)]
ftrace: fix setting of pos in read_pipe
In resetting the iterator in read_pipe, the reset of pos was
postitioned in the wrong location with respect to the memset
operation. The current code sets pos, incorrectly, to zero.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pekka Paalanen [Mon, 12 May 2008 19:21:01 +0000 (21:21 +0200)]
x86_64: fix kernel rodata NX setting
Without CONFIG_DYNAMIC_FTRACE, mark_rodata_ro() would mark a wrong
number of pages as no-execute. The bug was introduced in the patch
"ftrace: dont write protect kernel text". The symptom was machine reboot
after a CPU hotplug.
Signed-off-by: Pekka Paalanen <pq@iki.fi> Acked-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:21:00 +0000 (21:21 +0200)]
ftrace: fix comm on function trace output
In cleaning up of the sched_switch code, the function trace recording
of task comms was removed. This patch adds back the recording of comms
for function trace. The output of ftrace now has the task comm instead
of <...>.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:21:00 +0000 (21:21 +0200)]
lockdep: update lockdep_recursion on graph_lock
With the introduction of ftrace, it is possible to recurse into
the lockdep functions via the mcount call. To prevent possible
lockups, updating the lockdep_recursion counter on grabbing the internal
lockdep_lock should prevent deadlocks.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:59 +0000 (21:20 +0200)]
ftrace: trace_entries to dynamically change trace buffer size
This patch adds /debug/tracing/trace_entries that allows users to
see as well as modify the number of trace entries the buffers hold.
The number of entries only increments in ENTRIES_PER_PAGE which is
calculated by the size of an entry with the number of entries that
can fit in a page. The user does not need to use an exact size, but
the entries will be rounded to one of the increments.
Trying to set the entries to 0 will return with -EINVAL.
To avoid race conditions, the modification of the buffer size can only
be done when tracing is completely disabled (current_tracer == none).
A info message will be printed if a user tries to modify the buffer size
when not set to none.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:58 +0000 (21:20 +0200)]
ftrace: trace_pipe implement NONBLOCK
This patch implements "NONBLOCK" for trace_pipe. If the trace_pipe is opened
with O_NONBLOCK, then the trace_pipe read will not block when buffer is empty.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ankita Garg [Mon, 12 May 2008 19:20:58 +0000 (21:20 +0200)]
ftrace: fix conversion of task state to char in latency tracer
The conversion of task states to a character in the sched_switch tracer (part
of latency tracer infrastructure), seems to be incorrect. We currently do it
by indexing into the state_to_char array using the state value. The state
values do not map directly into the array index and are thus incorrect. The
following patch addresses this issue. This is also what is being done even
in the show_task() routine in kernel/sched.c
Pekka Paalanen [Mon, 12 May 2008 19:20:56 +0000 (21:20 +0200)]
x86: add a list for custom page fault handlers.
Provides kernel modules a way to register custom page fault handlers.
On every page fault this will call a list of registered functions. The
functions may handle the fault and force do_page_fault() to return
immediately.
This functionality is similar to the now removed page fault notifiers.
Custom page fault handlers are used by debugging and reverse engineering
tools. Mmiotrace is one such tool and a patch to add it into the tree
will follow.
The custom page fault handlers are called earlier in do_page_fault()
than the page fault notifiers were.
Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:56 +0000 (21:20 +0200)]
ftrace: dont write protect kernel text
Dynamic ftrace cant work when the kernel has its text write protected.
This patch keeps the kernel from being write protected when
dynamic ftrace is in place.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:56 +0000 (21:20 +0200)]
ftrace: selftest protect againt max flip
There is a slight race condition in the selftest where the max update
of the wakeup and irqs/preemption off tests can be doing a max update as
the buffers are being tested. If this happens the system can crash with
a GPF.
This patch adds the max update spinlock around the checking of the
buffers to prevent such a race.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:56 +0000 (21:20 +0200)]
ftrace: fix mutex unlock in trace output
If the trace output changes on reading the trace files, there is a chance
that the start function will return NULL. If the start function of a sequence
returns NULL the stop equivalent is not called. In this case, all locks
that are taken must be released even if they are released in the stop function.
This patch fixes a case that a mutex was not released on return of NULL
in the start sequence function.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:55 +0000 (21:20 +0200)]
ftrace: add UNINTERRUPTIBLE state for kftraced on disable
When dynamic ftrace fails and sets itself disabled, the ftraced daemon
will go back to sleep everytime it wakes up. The setting of the
ftraced state to UNINTERRUPTIBLE is skipped in this process, and the
daemon takes up 100% of the CPU. This patch makes sure the ftraced daemon
sets itself to UNINTERRUPTIBLE in that loop.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:55 +0000 (21:20 +0200)]
ftrace: use Makefile to remove tracing from lockdep
This patch removes the "notrace" annotation from lockdep and adds the debugging
files in the kernel director to those that should not be compiled with
"-pg" mcount tracing.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:55 +0000 (21:20 +0200)]
ftrace: remove function tracing from spinlock debug
The debug functions in spin_lock debugging pollute the output of the
function tracer. This patch adds the debug files in the lib director
to those that should not be compiled with mcount tracing.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:55 +0000 (21:20 +0200)]
ftrace: user raw_spin_lock in tracing
Lock debugging enabled cause huge performance problems for tracing. Having
the lock verification happening for every function that is called
because mcount calls spin_lock can cripple the system.
This patch converts the spin_locks used by ftrace into raw_spin_locks.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:55 +0000 (21:20 +0200)]
ftrace: irqsoff use raw_smp_processor_id
This patch changes the use of __get_cpu_var to explicitly calling
raw_smp_processor_id and using the per_cpu() macro. On some debug
configurations, the use of __get_cpu_var may cause ftrace to trigger
and this can cause problems with the irqsoff tracing.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:54 +0000 (21:20 +0200)]
ftrace: fix dynamic ftrace selftest
With the adding of the configuration changes in the Makefile to prevent
tracing of functions in the ftrace code, all tracing of all the ftrace
code has been removed. Unfortunately, one of the selftests, relied on
a function to be traced. With the new change, the function was no longer
traced and the test failed.
This patch separates out the test function into its own file so that
we can add the "-pg" flag to the compilation of that function and the
adding of the mcount call to that function.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:54 +0000 (21:20 +0200)]
ftrace: add TRACE_STACK and TRACE_SPECIAL to selftest validation
The selftest validation code checks for valid entries in the trace buffer.
TRACE_STACK and TRACE_SPECIAL have been added to the code but not to
the validator. This patch adds the two to prevent them from flagging a
failure in the selftest.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steven Rostedt [Mon, 12 May 2008 19:20:54 +0000 (21:20 +0200)]
ftrace: printk and trace irqsoff and wakeups
printk called from wakeup critical timings and irqs off can
cause deadlocks since printk might do a wakeup itself. If the
call to printk happens with the runqueue lock held, it can
deadlock.
This patch protects the printk from being called in trace irqs off
with a test to see if the runqueue for the current CPU is locked.
If it is locked, the printk is skipped.
The wakeup always holds the runqueue lock, so the printk is
simply removed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
projects / linux-2.6-omap-h63xx.git / log