Jiri Kosina [Fri, 19 Oct 2007 22:05:19 +0000 (00:05 +0200)]
USB: usbserial - fix potential deadlock between write() and IRQ
USB: usbserial - fix potential deadlock between write() and IRQ
usb_serial_generic_write() doesn't disable interrupts when taking port->lock,
and could therefore deadlock with usb_serial_generic_read_bulk_callback()
being called from interrupt, taking the same lock. Fix it.
Oliver Neukum [Tue, 23 Oct 2007 10:26:41 +0000 (12:26 +0200)]
USB: fix read vs. disconnect race in cytherm driver
the disconnect method of this driver set intfdata to NULL before
removing attribute files. The attributes' read methods will happily
follow the NULL pointer. Here's the correct ordering.
Signed-off-by : Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Fri, 19 Oct 2007 13:51:58 +0000 (09:51 -0400)]
USB: fix interface sysfs file-creation bug
This patch (as1005) fixes a rather subtle problem. When
usb_set_configuration() registers the interfaces and their files in
sysfs, it doesn't expect those files to exist already. But when an
interface is registered, its driver may call usb_set_interface() and
thereby cause the sysfs files to be created. The result is an error
when usb_set_configuration() goes on to create those same files again.
The (not-so-great) solution is to have usb_set_configuration() remove
any existing files before creating them.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ingo Molnar [Mon, 15 Oct 2007 17:43:21 +0000 (19:43 +0200)]
USB: fix ssb_ohci_probe() build bug
fix ssb_ohci_probe() build bug:
drivers/built-in.o: In function `ssb_ohci_probe':
ohci-hcd.c:(.text+0xbff39): undefined reference to `ssb_device_enable'
ohci-hcd.c:(.text+0xbff6f): undefined reference to `ssb_admatch_base'
ohci-hcd.c:(.text+0xbff8b): undefined reference to `ssb_admatch_size'
ohci-hcd.c:(.text+0xbffe5): undefined reference to `ssb_device_disable'
[...]
the reason was that this Kconfig combination was allowed:
Alan Cox [Mon, 15 Oct 2007 14:08:11 +0000 (15:08 +0100)]
USB: isd200: sort out USB/IDE dependancy mess
The ISD200 driver imports a single trivial routine from the IDE layer and
in doing so creates a mess of dependancies that drag in the entire old
IDE layer. Even more sad - it does this for a routine which is usually
(little endian) a null function!
- Copy the function into ISD200
- Rename it so it doesn't clash with the ide header prototype
- Remove all the depend constraints
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 16 Oct 2007 15:55:30 +0000 (11:55 -0400)]
USB: fix scheduling of Iso URBs in uhci-hcd
This patch (as1003) changes uhci-hcd to treat the URB_ISO_ASAP flag
the same as other host controller drivers, namely, to schedule an Iso
URB for the first available time slot that hasn't already expired.
URBs in which the flag isn't set will be scheduled for the first slot
following the last URB, even if it has expired.
This fixes a problem reported by Martin Bachem.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Morton [Thu, 18 Oct 2007 08:24:25 +0000 (01:24 -0700)]
USB: ftd_sio cleanups and updates for new termios work checkpatch fixes
WARNING: line over 80 characters
#23: FILE: drivers/usb/serial/ftdi_sio.c:297:
+ speed_t force_baud; /* if non-zero, force the baud rate to this value */
ERROR: use tabs not spaces
#31: FILE: drivers/usb/serial/ftdi_sio.c:881:
+^I$
ERROR: use tabs not spaces
#39: FILE: drivers/usb/serial/ftdi_sio.c:890:
+^I$
WARNING: line over 80 characters
#111: FILE: drivers/usb/serial/ftdi_sio.c:1956:
+ tty_encode_baud_rate(port->tty, priv->force_baud, priv->force_baud);
Your patch has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Thu, 18 Oct 2007 08:24:19 +0000 (01:24 -0700)]
USB: digi_acceleport: fix termios and also readability a bit
- Expand some x&y to x & y so I could read it when checking
- Clear CMSPAR bit in the termios (as the driver does not support it)
- Encode the speed using the new tty_encode_baud_rate facility
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Thu, 18 Oct 2007 08:24:18 +0000 (01:24 -0700)]
USB: ch341: fix termios handling
The ch341 currently doesn't support most of the hardware setting. So to keep
the termios data right we propogate the old termios hardware values back then
encode the speed.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Thu, 18 Oct 2007 08:24:16 +0000 (01:24 -0700)]
serial: stop passing NULL to functions that expect data
Earlier patches have removed the checking for old v new differences from the
USB drivers so we can now pass in a valid blank old termios so that we don't
to fill the drivers with magic hacks for console support
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Wed, 24 Oct 2007 03:50:57 +0000 (20:50 -0700)]
Linux 2.6.24-rc1
The patch is big. Really big. You just won't believe how vastly hugely
mindbogglingly big it is. I mean you may think it's a long way down the
road to the chemist, but that's just peanuts to how big the patch from
2.6.23 is.
Greg Ungerer [Wed, 24 Oct 2007 02:03:25 +0000 (12:03 +1000)]
m68knommu: cleanup 68360 startup code
Clean up 68360 timer support code. Removed header includes not needed.
Remove use of old m68knommu timer function pointers. Use common function
naming for 68328 timer functions.
Linus Torvalds [Wed, 24 Oct 2007 01:57:39 +0000 (18:57 -0700)]
Merge branch 'irq-upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6
* 'irq-upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
[SPARC, XEN, NET/CXGB3] use irq_handler_t where appropriate
drivers/char/riscom8: clean up irq handling
isdn/sc: irq handler clean
isdn/act2000: fix major bug. clean irq handler.
char/pcmcia/synclink_cs: trim trailing whitespace
drivers/char/ip2: separate polling and irq-driven work entry points
drivers/char/ip2: split out irq core logic into separate function
[NETDRVR] lib82596, netxen: delete pointless tests from irq handler
Eliminate pointless casts from void* in a few driver irq handlers.
[PARPORT] Remove unused 'irq' argument from parport irq functions
[PARPORT] Kill useful 'irq' arg from parport_{generic_irq,ieee1284_interrupt}
[PARPORT] Consolidate code copies into a single generic irq handler
Linus Torvalds [Wed, 24 Oct 2007 01:56:54 +0000 (18:56 -0700)]
Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (39 commits)
Remove Andrew Morton from list of net driver maintainers.
bonding: Acquire correct locks in alb for promisc change
bonding: Convert more locks to _bh, acquire rtnl, for new locking
bonding: Convert locks to _bh, rework alb locking for new locking
bonding: Convert miimon to new locking
bonding: Convert balance-rr transmit to new locking
Convert bonding timers to workqueues
Update MAINTAINERS to reflect my (jgarzik's) current efforts.
pasemi_mac: fix typo
defxx.c: dfx_bus_init() is __devexit not __devinit
s390 MAINTAINERS
remove header_ops bug in qeth driver
sky2: crash on remove
MIPSnet: Delete all the useless debugging printks.
AR7 ethernet: small post-merge cleanups and fixes
mv643xx_eth: Hook up mv643xx_get_sset_count
mv643xx_eth: Remove obsolete checksum offload comment
mv643xx_eth: Merge drivers/net/mv643xx_eth.h into mv643xx_eth.c
mv643xx_eth: Remove unused register defines
mv643xx_eth: Clean up mv643xx_eth.h
...
Jay Vosburgh [Thu, 18 Oct 2007 00:37:50 +0000 (17:37 -0700)]
bonding: Convert more locks to _bh, acquire rtnl, for new locking
Convert more lock acquisitions to _bh flavor to avoid deadlock
with workqueue activity and add acquisition of RTNL in appropriate places.
Affects ALB mode, as well as core bonding functions and sysfs.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jay Vosburgh [Thu, 18 Oct 2007 00:37:49 +0000 (17:37 -0700)]
bonding: Convert locks to _bh, rework alb locking for new locking
Convert locking-related activity to new & improved system.
Convert some lock acquisitions to _bh and rework parts of ALB mode, both
to avoid deadlocks with workqueue activity.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jay Vosburgh [Thu, 18 Oct 2007 00:37:48 +0000 (17:37 -0700)]
bonding: Convert miimon to new locking
Convert mii (link state) monitor to acquire correct locks for
failover events. In particular, failovers generally require RTNL at a low
level (when manipulating device MAC addresses, for example) and no other
locks. The high level monitor is responsible for acquiring a known set
of locks, RTNL, the bond->lock for read and the slave_lock for write, and
the low level failover processing can then release appropriate locks as
needed. This patch provides the high level portion.
As it is undesirable to acquire RTNL for every monitor pass (which
may occur as often as every 10 ms), the miimon has been converted to
do conditional locking. A first pass inspects all slaves to determine
if any action is required, and if so, a second pass (after acquring RTNL)
is done to perform any actions (doing a complete rescan, as the situation
may have changed when all locks were released).
Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jay Vosburgh [Thu, 18 Oct 2007 00:37:47 +0000 (17:37 -0700)]
bonding: Convert balance-rr transmit to new locking
Change locking in balance-rr transmit processing to use a free
running counter to determine which slave to transmit on. Instead, a
free-running counter is maintained, and modulo arithmetic used to select
a slave for transmit.
This removes lock operations from the TX path, and eliminates
a deadlock introduced by the conversion to work queues.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jay Vosburgh [Thu, 18 Oct 2007 00:37:45 +0000 (17:37 -0700)]
Convert bonding timers to workqueues
Convert bonding timers to workqueues. This converts the various
monitor functions to run in periodic work queues instead of timers. This
patch introduces the framework and convers the calls, but does not resolve
various locking issues, and does not stand alone.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Olof Johansson [Sat, 20 Oct 2007 19:10:03 +0000 (14:10 -0500)]
pasemi_mac: fix typo
Add missing &:
drivers/net/pasemi_mac.c: In function 'pasemi_mac_clean_rx':
drivers/net/pasemi_mac.c:553: warning: passing argument 1 of 'prefetch'
makes pointer from integer without a cast
Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Ursula Braun [Mon, 22 Oct 2007 14:16:14 +0000 (16:16 +0200)]
remove header_ops bug in qeth driver
Remove qeth bug caused by commit:
[NET]: Move hardware header operations out of netdevice.
This is the second part of the qeth header_ops patch, since
first patch sent 10/19 has been insufficient.
Nevertheless first patch is still valid and should be kept.
Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Neil Brown [Tue, 23 Oct 2007 21:09:13 +0000 (17:09 -0400)]
NFS: Fix for bug in handling of errors for O_DIRECT writes
Commit eda3cef8dd2b83875affe82595db9d0c278879b2 ("NFS: Fix error
handling in nfs_direct_write_result()") ensured that if a WRITE returns
an error, then data->res.verf->committed is not tested (as it is not
initialised).
So move the test so that we never examine ->committed in an error case,
and fix a speeling error while we are there.
Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 23 Oct 2007 23:32:11 +0000 (16:32 -0700)]
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 4630/1: Fix the vector stride of the double vector instruction.
[ARM] 4629/1: Fix VFP emulation code to clear all exception flags of FPEXC
[ARM] 4613/1: pxa300: MFP typo fix
Carlos Corbacho [Fri, 19 Oct 2007 17:51:27 +0000 (18:51 +0100)]
x86: Force enable HPET for CK804 (nForce 4) chipsets
This patch adds a quirk from LinuxBIOS to force enable HPET on
the nVidia CK804 (nForce 4) chipset.
This quirk can very likely support more than just nForce 4
(LinuxBIOS use the same code for nForce 5), and possibly nForce 3,
but I don't have those chipsets, so cannot add and test them.
projects / linux-2.6-omap-h63xx.git / log