]> pilppa.com Git - linux-2.6-omap-h63xx.git/log
linux-2.6-omap-h63xx.git
16 years agonozomi: Fix close on error
Alan Cox [Mon, 13 Oct 2008 09:35:33 +0000 (10:35 +0100)]
nozomi: Fix close on error

Nozomi assumes the close method isn't called if open errors. The tty layer
is different to other drives in this respect however. Pointed out by Denis J
Barrow.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoserial: Make uart_port's ioport "unsigned long".
David Miller [Mon, 13 Oct 2008 09:35:23 +0000 (10:35 +0100)]
serial: Make uart_port's ioport "unsigned long".

Otherwise the top 32-bits of the resource value get chopped
off on 64-bit systems, and the resulting I/O accesses go to
random places.

Thanks to testing and debugging by Josip Rodin, which helped
track this down.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoaudit: Handle embedded NUL in TTY input auditing
Miloslav Trmac [Mon, 13 Oct 2008 09:35:15 +0000 (10:35 +0100)]
audit: Handle embedded NUL in TTY input auditing

Data read from a TTY can contain an embedded NUL byte (e.g. after
pressing Ctrl-2, or sent to a PTY).  After the previous patch, the data
would be logged only up to the first NUL.

This patch modifies the AUDIT_TTY record to always use the hexadecimal
format, which does not terminate at the first NUL byte.  The vast
majority of recorded TTY input data will contain either ' ' or '\n', so
the hexadecimal format would have been used anyway.

Signed-off-by: Miloslav Trmac <mitr@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoip2: avoid add_timer with pending timer
Akinobu Mita [Mon, 13 Oct 2008 09:35:05 +0000 (10:35 +0100)]
ip2: avoid add_timer with pending timer

add_timer() is not supposed to be called when the timer is pending.
ip2 driver attempts to avoid that condition by setting and resetting
a flag (TimerOn) in timer function. But there is some gap between
add_timer() and setting TimerOn.

This patch fix this problem by using mod_timer() and remove TimerOn
which has been unnecessary by this change.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoip2: init/deinit cleanup
Jiri Slaby [Mon, 13 Oct 2008 09:34:56 +0000 (10:34 +0100)]
ip2: init/deinit cleanup

Cleanup of module_init/exit:
- mostly whitespace
- remove empty functions
- replace c++ comments
- remove useless prints (module loaded, unloaded)
- mark the calls as __exit and __init
- use break; and return; to save some indent levels after it
- note resource leakage

It's still mess, but now it's readable.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoip2: fix sparse warnings
Jiri Slaby [Mon, 13 Oct 2008 09:34:45 +0000 (10:34 +0100)]
ip2: fix sparse warnings

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoip2: cleanup globals
Jiri Slaby [Mon, 13 Oct 2008 09:34:36 +0000 (10:34 +0100)]
ip2: cleanup globals

- do not init .bss zeroed data to zero again (by memset or
  explicit assignment)
- use char [] instead of char * for string constants

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoChar: merge ip2main and ip2base
Jiri Slaby [Mon, 13 Oct 2008 09:34:27 +0000 (10:34 +0100)]
Char: merge ip2main and ip2base

It's pretty useless to have one setup() function separated along with
module_init() which only calls a function from ip2main anyway. Get rid
of ip2base.

Remove also checks of always-true now.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoChar: sx, fix io unmapping
Jiri Slaby [Mon, 13 Oct 2008 09:34:18 +0000 (10:34 +0100)]
Char: sx, fix io unmapping

board->base is increased for CF cards after mapping. Use board->base2
for unmapping the region, since it holds the original/correct address.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoChar: cyclades. remove bogus iomap
Jiri Slaby [Mon, 13 Oct 2008 09:34:09 +0000 (10:34 +0100)]
Char: cyclades. remove bogus iomap

readl/writel are not expected to accept iomap return value. Replace
bogus mapping by standard ioremap.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoFix oti6858 debug level
Scott Ashcroft [Mon, 13 Oct 2008 09:34:00 +0000 (10:34 +0100)]
Fix oti6858 debug level

For some reason the oti6858 driver undefines and redefines the dbg
macro. This makes it spew debugging messages at KERN_INFO instead of
KERN_DEBUG.

This patch removes the undef and define making the driver log like every
other USB serial driver.

Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoBlackfin Serial Driver: Fix bug - request UART2/3 peripheral mapped interrupts in...
Sonic Zhang [Mon, 13 Oct 2008 09:33:51 +0000 (10:33 +0100)]
Blackfin Serial Driver: Fix bug - request UART2/3 peripheral mapped interrupts in PIO mode

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoBlackfin Serial Driver: Fix bug - ircp fails on sir over Blackfin UART
Graf Yang [Mon, 13 Oct 2008 09:33:42 +0000 (10:33 +0100)]
Blackfin Serial Driver: Fix bug - ircp fails on sir over Blackfin UART

We now use the sir_dev/irtty_sir/uart/bfin_serial drivers framework
to monitor the TX status.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoBlackfin Serial Driver: Fix bug - Don't call tx_stop in tx_transfer.
Sonic Zhang [Mon, 13 Oct 2008 09:33:33 +0000 (10:33 +0100)]
Blackfin Serial Driver: Fix bug - Don't call tx_stop in tx_transfer.

Disable irq and return immediately.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoBlackfin Serial Driver: Remove useless stop
Sonic Zhang [Mon, 13 Oct 2008 09:33:25 +0000 (10:33 +0100)]
Blackfin Serial Driver: Remove useless stop

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoBlackfin Serial Driver: move common variables out of serial headers and into the...
Mike Frysinger [Mon, 13 Oct 2008 09:33:16 +0000 (10:33 +0100)]
Blackfin Serial Driver: move common variables out of serial headers and into the serial driver

move common variables out of serial headers and into the serial driver and
rename "nr_ports" to "nr_active_ports" so as to easily differentiate
between BFIN_UART_NR_PORTS (the # of available) and nr_ports (the # of enabled)

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoBlackfin Serial Driver: trim trailing whitespace -- no functional changes
Mike Frysinger [Mon, 13 Oct 2008 09:33:06 +0000 (10:33 +0100)]
Blackfin Serial Driver: trim trailing whitespace -- no functional changes

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoBlackfin Serial Driver: Fix bug - should suspend/resume/remove all uart ports.
Sonic Zhang [Mon, 13 Oct 2008 09:32:44 +0000 (10:32 +0100)]
Blackfin Serial Driver: Fix bug - should suspend/resume/remove all uart ports.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoBlackfin Serial Driver: use __initdata for data, not __init
Mike Frysinger [Mon, 13 Oct 2008 09:32:35 +0000 (10:32 +0100)]
Blackfin Serial Driver: use __initdata for data, not __init

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoepca: call tty_port_init
Alan Cox [Mon, 13 Oct 2008 09:32:09 +0000 (10:32 +0100)]
epca: call tty_port_init

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agocoldfire: scheduled SERIAL_COLDFIRE removal
Adrian Bunk [Mon, 13 Oct 2008 09:31:59 +0000 (10:31 +0100)]
coldfire: scheduled SERIAL_COLDFIRE removal

This patch contains the scheduled removal of the obsolete
SERIAL_COLDFIRE driver.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodrivers/char/hvc_console.c: adjust call to put_tty_driver
Julia Lawall [Mon, 13 Oct 2008 09:31:49 +0000 (10:31 +0100)]
drivers/char/hvc_console.c: adjust call to put_tty_driver

The call to put_tty_driver is out of place and is applied to the wrong
argument.

The function enclosing the patched code calls alloc_tty_driver and stores
the result in drv.  Subsequently, there are two occurrences of error
handling code, one making a goto to put_tty and one making a goto to
stop_thread.  At the point of the first one the assignment hvc_driver = drv
has not yet been executed, and from inspecting the rest of the file it
seems that hvc_driver would be NULL.  Thus the current call to
put_tty_driver is useless, and one applied to drv is needed.  The goto
stop_thread is in the error handling code for a call to
tty_register_driver, but the error cases in tty_register_driver do not free
its argument, so it should be done here.  Thus, I have moved the put_tty
label after the stop_thread label, so that put_tty_driver is called in both
cases.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
expression E,f;
position p1,p2,p3;
identifier l;
statement S;
@@

x = alloc_tty_driver@p1(...)
...
if (x == NULL) S
... when != E = x
    when != put_tty_driver(x)
goto@p2 l;
... when != E = x
    when != f(...,x,...)
    when any
(
return \(0\|x\);
|
return@p3 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
p3 << r.p3;
@@

print "%s: call on line %s not freed or saved before return on line %s via line %s" % (p1[0].file,p1[0].line,p3[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodrivers/serial/crisv10.c: add missing put_tty_driver
Julia Lawall [Mon, 13 Oct 2008 09:31:37 +0000 (10:31 +0100)]
drivers/serial/crisv10.c: add missing put_tty_driver

alloc_tty_driver is called at the beginning of the function containing the
lines of code shown in the patch.  Thus, put_tty_driver is needed before
returning in the error handling code.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@nr exists@
local idexpression x;
expression E,f;
position p1,p2,p3;
identifier l;
statement S;
@@

x = alloc_tty_driver@p1(...)
...
if (x == NULL) S
... when != E = x
    when != put_tty_driver(x)
    when != goto l;
(
return \(0\|x\);
|
return@p3 ...;
)

@script:python@
p1 << nr.p1;
p3 << nr.p3;
@@

print "%s: call on line %s not freed or saved before return on line %s" % (p1[0].file,p1[0].line,p3[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMN10300: MEI are renaming themselves to Panasonic
David Howells [Mon, 13 Oct 2008 09:42:44 +0000 (10:42 +0100)]
MN10300: MEI are renaming themselves to Panasonic

MEI are renaming themselves to Panasonic, so update the MAINTAINERS
record for the MN10300 arch.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMAINTAINERS: remove colon from headings
Randy Dunlap [Sun, 12 Oct 2008 23:11:58 +0000 (16:11 -0700)]
MAINTAINERS: remove colon from headings

Remove ending ':' from some of the Topic lines for consistency.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMAINTAINERS: add F: and acronyms
Randy Dunlap [Sun, 12 Oct 2008 23:11:45 +0000 (16:11 -0700)]
MAINTAINERS: add F: and acronyms

Add F: definition since it is being used.

Expand acronyms or add them so that users of MAINTAINERS file can find
entries more easily.

Correct driver spelling.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMAINTAINERS: alpha sort
Randy Dunlap [Sun, 12 Oct 2008 23:11:31 +0000 (16:11 -0700)]
MAINTAINERS: alpha sort

Sorted case-insensitive (sort -f).
Groups that begin with ARM, INTEL, etc. not sorted.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Sun, 12 Oct 2008 23:10:29 +0000 (16:10 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix kconfig typo and extra whitespace
  ext4: fix build failure without procfs
  ext4: add an option to control error handling on file data
  jbd2: don't dirty original metadata buffer on abort
  ext4: add checks for errors from jbd2
  jbd2: fix error handling for checkpoint io
  jbd2: abort when failed to log metadata buffers

16 years agoext4: fix kconfig typo and extra whitespace
Jan Engelhardt [Sun, 12 Oct 2008 19:53:01 +0000 (15:53 -0400)]
ext4: fix kconfig typo and extra whitespace

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
16 years agoext4: fix build failure without procfs
Alexander Beregalov [Sun, 12 Oct 2008 21:27:49 +0000 (17:27 -0400)]
ext4: fix build failure without procfs

fs/ext4/super.c: In function 'ext4_fill_super':
fs/ext4/super.c:2226: error: 'ext4_ui_proc_fops' undeclared (first use
in this function)
fs/ext4/super.c:2226: error: (Each undeclared identifier is reported
only once
fs/ext4/super.c:2226: error: for each function it appears in.)

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Sun, 12 Oct 2008 19:42:29 +0000 (12:42 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] cifs: remove pointless lock and unlock of GlobalMid_Lock in header_assemble

16 years agoFix Kconfig dependency for WM97xx battery driver
Linus Torvalds [Sun, 12 Oct 2008 19:37:16 +0000 (12:37 -0700)]
Fix Kconfig dependency for WM97xx battery driver

It needs the WM97xx touchscreen driver to be compiled in, not as a
module.  And it cannot itself be a module, due to some unfortunate
interactions with platform data.

Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'x86-core-v2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 12 Oct 2008 19:04:59 +0000 (12:04 -0700)]
Merge branch 'x86-core-v2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

This merges in:

  x86/build, x86/microcode, x86/spinlocks, x86/memory-corruption-check,
  x86/early-printk, x86/xsave, x86/quirks, x86/setup, x86/signal,
  core/signal, x86/urgent, x86/xen

* 'x86-core-v2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (142 commits)
  x86: make processor type select depend on CONFIG_EMBEDDED
  x86: extend processor type select help text
  x86, amd-iommu: propagate PCI device enabling error
  warnings: fix arch/x86/kernel/io_apic_64.c
  warnings: fix arch/x86/kernel/early_printk.c
  x86, fpu: check __clear_user() return value
  x86: memory corruption check - cleanup
  x86: ioperm user_regset
  xen: do not reserve 2 pages of padding between hypervisor and fixmap.
  xen: use spin_lock_nest_lock when pinning a pagetable
  x86: xsave: set FP, SSE bits in the xsave header in the user sigcontext
  x86: xsave: fix error condition in save_i387_xstate()
  x86: SB450: deprioritize DMI quirks
  x86: SB450: skip IRQ0 override if it is not routed to INT2 of IOAPIC
  x86: replace a magic number with a named constant in the VESA boot code
  x86 setup: remove IMAGE_OFFSET
  x86 setup: remove DEF_INITSEG and DEF_SETUPSEG
  Revert "x86: fix ghost EDD devices in /sys again"
  x86 setup: fix ghost entries under /sys/firmware/edd take 3
  x86: signal: remove indent in restore_sigcontext()
  ...

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
Linus Torvalds [Sun, 12 Oct 2008 19:00:23 +0000 (12:00 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: Fix build failures in board code
  avr32: Allow selecting multiple pins at once
  avr32: Minor pm_power_off cleanup
  avr32: Implement {read,write}[bwl]_be
  avr32: Replace static clock list with dynamic linked list
  avr32: Use platform_driver_probe for pdc platform driver
  avr32: Use platform_driver_probe for pio platform driver
  avr32: Provide a way to deselect pins in the portmux
  ngw100: export J15 through sysfs
  avr32: Allow fine-grained control over LCDC pins
  avr32: added mem kernel command line option support
  Add kernel support for oprofile callgraphs on AVR32
  avr32: use the new byteorder headers

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Sun, 12 Oct 2008 18:51:57 +0000 (11:51 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (24 commits)
  MMC: Use timeout values from CSR
  MMC: CSD and CID timeout values
  sdhci: 'scratch' may be used uninitialized
  mmc: explicitly mention SDIO support in Kconfig
  mmc: remove redundant "depends on"
  Fix comment in include/linux/mmc/host.h
  sdio: high-speed support
  mmc_block: hard code 512 byte block size
  sdhci: force high speed capability on some controllers
  mmc_block: filter out PC requests
  mmc_block: indicate strict ordering
  mmc_block: inform block layer about sector count restriction
  sdio: give sdio irq thread a host specific name
  sdio: make sleep on error interruptable
  sdhci: reduce card detection delay
  sdhci: let the controller wait for busy state to end
  atmel-mci: Add missing flush_dcache_page() in PIO transfer code
  atmel-mci: Don't overwrite error bits when NOTBUSY is set
  atmel-mci: Add experimental DMA support
  atmel-mci: support multiple mmc slots
  ...

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Sun, 12 Oct 2008 18:51:32 +0000 (11:51 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] orion5x_wdt.c: add spinlocking
  [WATCHDOG] Orion: add hardware watchdog support
  [WATCHDOG] omap_wdt.c: cleanup a bit omap_wdt.c
  [WATCHDOG] omap_wdt.c: another ioremap() fix
  [WATCHDOG] omap_wdt.c: sync linux-omap changes
  [WATCHDOG] Add AT91SAM9X watchdog
  [WATCHDOG] Add driver for winbond w83697ug/uf watchdog feature
  [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/K

16 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 12 Oct 2008 18:50:37 +0000 (11:50 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix early panic on amd64 due to typo in supported CPU section
  x86, early_ioremap: fix fencepost error
  x86: avoid dereferencing beyond stack + THREAD_SIZE

16 years agoprovide generic_block_fiemap() only with BLOCK=y
Adrian Bunk [Sun, 12 Oct 2008 04:15:19 +0000 (07:15 +0300)]
provide generic_block_fiemap() only with BLOCK=y

This fixes the following compile error with CONFIG_BLOCK=n caused by
commit 68c9d702bb72f367f3b148963ec6cf5e07ff7f65 ("generic block based
fiemap implementation"):

    CC      fs/ioctl.o
  fs/ioctl.c: In function 'generic_block_fiemap':
  fs/ioctl.c:249: error: storage size of 'tmp' isn't known
  fs/ioctl.c:272: error: invalid application of 'sizeof' to incomplete type 'struct buffer_head'
  fs/ioctl.c:280: error: implicit declaration of function 'buffer_mapped'
  fs/ioctl.c:249: warning: unused variable 'tmp'
  make[2]: *** [fs/ioctl.o] Error 1

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoadd key_revoke() dummy for KEYS=n
Adrian Bunk [Sun, 12 Oct 2008 04:10:50 +0000 (07:10 +0300)]
add key_revoke() dummy for KEYS=n

This fixes the following build error with CONFIG_KEYS=n, caused by
commit dfd15c46a6c2cafb006183c0c14f07e59eee4ac0 ("cifs: explicitly
revoke SPNEGO key after session setup"):

    CC [M]  fs/cifs/sess.o
  fs/cifs/sess.c: In function 'CIFS_SessSetup':
  fs/cifs/sess.c:628: error: implicit declaration of function 'key_revoke'
  make[3]: *** [fs/cifs/sess.o] Error 1

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6
Linus Torvalds [Sun, 12 Oct 2008 18:40:55 +0000 (11:40 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (180 commits)
  leo: disable cursor when leaving graphics mode
  cg6: disable cursor when leaving graphics mode
  sparc32: sun4m interrupt mask cleanup
  drivers/rtc/Kconfig: don't build rtc-cmos.o on sparc32
  sparc: arch/sparc/kernel/pmc.c -- extra #include?
  sparc32: Add more extensive documentation of sun4m interrupts.
  sparc32: Kill irq_rcvreg from sun4m_irq.c
  sparc32: Delete master_l10_limit.
  sparc32: Use PROM device probing for sun4c timers.
  sparc32: Use PROM device probing for sun4c interrupt register.
  sparc32: Delete claim_ticker14().
  sparc32: Stop calling claim_ticker14() from sun4c_irq.c
  sparc32: Kill clear_profile_irq btfixup entry.
  sparc32: Call sun4m_clear_profile_irq() directly from sun4m_smp.c
  sparc32: Remove #if 0'd code from sun4c_irq.c
  sparc32: Remove some SMP ifdefs in sun4d_irq.c
  sparc32: Use PROM infrastructure for probing and mapping sun4d timers.
  sparc32: Use PROM device probing for sun4m irq registers.
  sparc32: Use PROM device probing for sun4m timer registers.
  sparc: Fix user_regset 'n' field values.
  ...

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sun, 12 Oct 2008 18:40:34 +0000 (11:40 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  smc911x: Fix external PHY detection
  e1000: allow VLAN devices to use TSO and CSUM offload
  gre: Initialise rtnl_link tunnel parameters properly
  ipvs: Add proper dependencies on IP_VS, and fix description header line.

16 years agoFix RTC wakealarm sysfs interface breakage.
Linus Torvalds [Sun, 12 Oct 2008 18:30:08 +0000 (11:30 -0700)]
Fix RTC wakealarm sysfs interface breakage.

Commit ed458df4d2470adc02762a87a9ad665d0b1a2bd4 ("PnP: move
pnpacpi/pnpbios_init to after PCI init") moved the PnP RTC discovery
later, and now the ACPI RTC glue code doesn't find it any more, breaking
the RTC wakealarm sysfs interfaces, as reported by Rafael.

This really is fairly messy, and we have several annoying ordering
constraints here - the PnP code that sets up the RTC resources wants to
run after the PCI resources have to be registered, which in turn needs
to run after ACPI has at least enumerated the root PCI buses etc.  Our
initcall ordering is not fine-grained enough to make this all painless.

So this moves the ACPI RTC glue ("acpi_rtc_init()") down to a regular
module call, which fixes the problem Rafael has.  The reason this isn't
wonderful is that we really should do acpi_rtc_init before we do the
rtc_cmos init, and now those two are in the same module_init() section.

Which happens to work, but only because drivers/rtc is linked after
drivers/acpi.  In other words, we still have a very subtle ordering
issue here. Grr.

Reported-and-tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoavr32: Fix build failures in board code
Haavard Skinnemoen [Sun, 12 Oct 2008 14:02:46 +0000 (16:02 +0200)]
avr32: Fix build failures in board code

Fix a few instances of board code breakage introduced by the atmel-mci
platform interface changes.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16 years agoavr32: Allow selecting multiple pins at once
Julien May [Wed, 24 Sep 2008 08:30:47 +0000 (10:30 +0200)]
avr32: Allow selecting multiple pins at once

at32_select_periph() now takes an u32 bitmask rather than a single pin.
This allows to set multiple pins at once.

Signed-off-by: Alex Raimondi <mailinglist@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16 years agoMerge branches 'x86/xen', 'x86/build', 'x86/microcode', 'x86/mm-debug-v2', 'x86/memor...
Ingo Molnar [Sun, 12 Oct 2008 13:50:02 +0000 (15:50 +0200)]
Merge branches 'x86/xen', 'x86/build', 'x86/microcode', 'x86/mm-debug-v2', 'x86/memory-corruption-check', 'x86/early-printk', 'x86/xsave', 'x86/ptrace-v2', 'x86/quirks', 'x86/setup', 'x86/spinlocks' and 'x86/signal' into x86/core-v2

16 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen...
Haavard Skinnemoen [Sun, 12 Oct 2008 13:44:33 +0000 (15:44 +0200)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/atmel-mci-2.6.28

16 years agox86: make processor type select depend on CONFIG_EMBEDDED
Ingo Molnar [Sun, 12 Oct 2008 13:40:45 +0000 (15:40 +0200)]
x86: make processor type select depend on CONFIG_EMBEDDED

deselecting one of the CPU type CONFIG_CPU_SUP_* config options
can render a kernel unbootable. Make sure this option is only
available if CONFIG_EMBEDDED is enabled.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: extend processor type select help text
Ingo Molnar [Sun, 12 Oct 2008 13:36:24 +0000 (15:36 +0200)]
x86: extend processor type select help text

extend the help text of the CONFIG_CPU_SUP_* config options to
express what it does and what effects it has.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years ago[CIFS] cifs: remove pointless lock and unlock of GlobalMid_Lock in header_assemble
Jeff Layton [Sun, 12 Oct 2008 13:34:11 +0000 (13:34 +0000)]
[CIFS] cifs: remove pointless lock and unlock of GlobalMid_Lock in header_assemble

We lock GlobalMid_Lock in header_assemble and then immediately unlock it
again without doing anything. Not sure what this was intended to do, but
remove it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
16 years agox86, amd-iommu: propagate PCI device enabling error
Ingo Molnar [Sun, 12 Oct 2008 13:24:53 +0000 (15:24 +0200)]
x86, amd-iommu: propagate PCI device enabling error

propagate an error in enabling the PCI device.

Also eliminates this warning:

 arch/x86/kernel/amd_iommu_init.c: In function â€˜init_iommu_one’:
 arch/x86/kernel/amd_iommu_init.c:726: warning: ignoring return value of â€˜pci_enable_device’, declared with attribute warn_unused_result

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agowarnings: fix arch/x86/kernel/io_apic_64.c
Ingo Molnar [Sun, 12 Oct 2008 13:22:22 +0000 (15:22 +0200)]
warnings: fix arch/x86/kernel/io_apic_64.c

fix:

 arch/x86/kernel/io_apic_64.c: In function â€˜print_local_APIC’:
 arch/x86/kernel/io_apic_64.c:1284: warning: format â€˜%08x’ expects type â€˜unsigned int’, but argument 2 has type â€˜long unsigned int’
 arch/x86/kernel/io_apic_64.c:1285: warning: format â€˜%08x’ expects type â€˜unsigned int’, but argument 2 has type â€˜long unsigned int’

We want to print the two halves of 'icr' at 32 bit width.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agowarnings: fix arch/x86/kernel/early_printk.c
Ingo Molnar [Wed, 27 Aug 2008 08:37:14 +0000 (10:37 +0200)]
warnings: fix arch/x86/kernel/early_printk.c

fix warning:

  arch/x86/kernel/early_printk.c:993: warning: â€˜enable_debug_console’ defined but not used

Eliminate dead code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86, fpu: check __clear_user() return value
Ingo Molnar [Mon, 18 Aug 2008 10:59:32 +0000 (12:59 +0200)]
x86, fpu: check __clear_user() return value

fix warning:

  arch/x86/kernel/xsave.c: In function â€˜save_i387_xstate’:
  arch/x86/kernel/xsave.c:98: warning: ignoring return value of â€˜__clear_user’, declared with attribute warn_unused_result

check the return value and act on it. We should not be ignoring faults
at this point.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoMerge branch 'linus' into x86/xsave
Ingo Molnar [Sun, 12 Oct 2008 13:17:14 +0000 (15:17 +0200)]
Merge branch 'linus' into x86/xsave

16 years agox86: memory corruption check - cleanup
Ingo Molnar [Sun, 12 Oct 2008 13:06:29 +0000 (15:06 +0200)]
x86: memory corruption check - cleanup

Move the prototypes from the generic kernel.h header to the more
appropriate include/asm-x86/bios_ebda.h header file.

Also, remove the check from the power management code - this is a
pure x86 matter for now.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoMerge branch 'linus' into x86/memory-corruption-check
Ingo Molnar [Sun, 12 Oct 2008 13:05:39 +0000 (15:05 +0200)]
Merge branch 'linus' into x86/memory-corruption-check

16 years agoMerge branches 'core/signal' and 'x86/spinlocks' into x86/xen
Ingo Molnar [Sun, 12 Oct 2008 11:20:25 +0000 (13:20 +0200)]
Merge branches 'core/signal' and 'x86/spinlocks' into x86/xen

Conflicts:
include/asm-x86/spinlock.h

16 years agoMerge branch 'x86/signal' into core/signal
Ingo Molnar [Sun, 12 Oct 2008 11:17:07 +0000 (13:17 +0200)]
Merge branch 'x86/signal' into core/signal

16 years agoMerge branch 'linus' into x86/signal
Ingo Molnar [Sun, 12 Oct 2008 10:49:27 +0000 (12:49 +0200)]
Merge branch 'linus' into x86/signal

Conflicts:
arch/x86/kernel/signal_64.c

16 years agoMerge branch 'linus' into x86/quirks
Ingo Molnar [Sun, 12 Oct 2008 10:43:21 +0000 (12:43 +0200)]
Merge branch 'linus' into x86/quirks

Conflicts:
arch/x86/kernel/early-quirks.c

16 years agoMerge branch 'linus' into x86/spinlocks
Ingo Molnar [Sun, 12 Oct 2008 10:39:30 +0000 (12:39 +0200)]
Merge branch 'linus' into x86/spinlocks

Done to prevent this failure of an Octopus merge:

 Added arch/arm/include/asm/byteorder.h in both, but differently.
 ERROR: Merge conflict in arch/arm/include/asm/byteorder.h
 Auto-merging include/asm-x86/spinlock.h
 ERROR: Merge conflict in include/asm-x86/spinlock.h
 fatal: merge program failed

16 years agoMerge branch 'linus' into x86/xen
Ingo Molnar [Sun, 12 Oct 2008 10:35:23 +0000 (12:35 +0200)]
Merge branch 'linus' into x86/xen

Conflicts:
arch/x86/kernel/cpu/common.c
arch/x86/kernel/process_64.c
arch/x86/xen/enlighten.c

16 years agox86: ioperm user_regset
Roland McGrath [Fri, 8 Aug 2008 22:58:39 +0000 (15:58 -0700)]
x86: ioperm user_regset

This adds a user_regset type for the x86 io permissions bitmap.
This makes it appear in core dumps (when ioperm has been used).
It will also make it visible to debuggers in the future.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
[conflict resolutions: Signed-off-by: Ingo Molnar <mingo@elte.hu> ]

16 years agoMerge branch 'x86/urgent' into core/signal
Ingo Molnar [Sun, 12 Oct 2008 09:32:17 +0000 (11:32 +0200)]
Merge branch 'x86/urgent' into core/signal

Conflicts:
arch/x86/kernel/signal_64.c

16 years agox86: fix early panic on amd64 due to typo in supported CPU section
Petr Vandrovec [Sun, 12 Oct 2008 08:51:03 +0000 (10:51 +0200)]
x86: fix early panic on amd64 due to typo in supported CPU section

Do not crash when enumerating supported CPU architectures

SECURITY_INIT somehow ended up in x86_cpu_dev.init section.  That caused printk
in code which prints supported architectures to hit #GP due to non-canonical
address being used.

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: thomas.petazzoni@free-electrons.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86, early_ioremap: fix fencepost error
Alan Cox [Fri, 10 Oct 2008 09:46:45 +0000 (10:46 +0100)]
x86, early_ioremap: fix fencepost error

The x86 implementation of early_ioremap has an off by one error. If we get
an object which ends on the first byte of a page we undermap by one page and
this causes a crash on boot with the ASUS P5QL whose DMI table happens to fit
this alignment.

The size computation is currently

last_addr = phys_addr + size - 1;
npages = (PAGE_ALIGN(last_addr) - phys_addr)

(Consider a request for 1 byte at alignment 0...)

Closes #11693

Debugging work by Ian Campbell/Felix Geyer

Signed-off-by: Alan Cox <alan@rehat.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: avoid dereferencing beyond stack + THREAD_SIZE
David Rientjes [Tue, 7 Oct 2008 21:15:11 +0000 (14:15 -0700)]
x86: avoid dereferencing beyond stack + THREAD_SIZE

It's possible for get_wchan() to dereference past task->stack + THREAD_SIZE
while iterating through instruction pointers if fp equals the upper boundary,
causing a kernel panic.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen...
Pierre Ossman [Sun, 12 Oct 2008 09:08:46 +0000 (11:08 +0200)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/atmel-mci-2.6.28

Conflicts:
drivers/mmc/host/atmel-mci.c

16 years agoMMC: Use timeout values from CSR
Matthew Fleming [Thu, 2 Oct 2008 11:21:42 +0000 (12:21 +0100)]
MMC: Use timeout values from CSR

Hard-coded timeout values of 250ms for writes and 100ms for reads are
currently used for MMC transactions over SPI. The spec states that the
timeout values from the card should be used.

Signed-off-by: Matthew Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agoMMC: CSD and CID timeout values
Matthew Fleming [Thu, 2 Oct 2008 11:24:05 +0000 (12:24 +0100)]
MMC: CSD and CID timeout values

The MMC spec states that the timeout for accessing the CSD and CID
registers is 64 clock cycles.

Signed-off-by: Matthew Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agosdhci: 'scratch' may be used uninitialized
Steven Noonan [Wed, 1 Oct 2008 08:50:25 +0000 (01:50 -0700)]
sdhci: 'scratch' may be used uninitialized

The variable 'scratch' is always initialized before it's used. The
conditional which is responsible for initialization of 'scratch' will
always evaluate 'true' when the first loop iteration occurs, and thus,
it's properly initialized. GCC doesn't see this, of course, so using
the uninitialized_var() macro seems to work for silencing this case.

Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agommc: explicitly mention SDIO support in Kconfig
Pierre Ossman [Sun, 7 Sep 2008 11:16:58 +0000 (13:16 +0200)]
mmc: explicitly mention SDIO support in Kconfig

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agommc: remove redundant "depends on"
Pierre Ossman [Sun, 7 Sep 2008 11:07:57 +0000 (13:07 +0200)]
mmc: remove redundant "depends on"

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agoFix comment in include/linux/mmc/host.h
Thomas Petazzoni [Tue, 2 Sep 2008 08:14:13 +0000 (10:14 +0200)]
Fix comment in include/linux/mmc/host.h

In include/linux/mmc/host.h, it is mentionned that the callback to
know if a card is present or not is get_ro(). But it's get_cd().

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agosdio: high-speed support
Pierre Ossman [Sun, 31 Aug 2008 15:22:46 +0000 (17:22 +0200)]
sdio: high-speed support

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agommc_block: hard code 512 byte block size
Pierre Ossman [Sun, 31 Aug 2008 12:10:08 +0000 (14:10 +0200)]
mmc_block: hard code 512 byte block size

We use 512 byte blocks on all cards, and newer cards support nothing
else, so hard code it and make the code less complex.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agosdhci: force high speed capability on some controllers
Pierre Ossman [Sat, 16 Aug 2008 18:43:04 +0000 (20:43 +0200)]
sdhci: force high speed capability on some controllers

Some high speed capable controllers forget to set the high speed
capability bit. Make sure we enable the functionality anyway.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agommc_block: filter out PC requests
Pierre Ossman [Sat, 16 Aug 2008 18:43:48 +0000 (20:43 +0200)]
mmc_block: filter out PC requests

We do not support PC (SCSI) commands, so don't pretend we do by
letting them through.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agommc_block: indicate strict ordering
Pierre Ossman [Sat, 16 Aug 2008 19:15:50 +0000 (21:15 +0200)]
mmc_block: indicate strict ordering

The MMC block driver services requests one at a time and in strict
order. Indicate this to the block layer so that it can handle barriers
in an efficient manner.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agommc_block: inform block layer about sector count restriction
Pierre Ossman [Sat, 16 Aug 2008 19:34:02 +0000 (21:34 +0200)]
mmc_block: inform block layer about sector count restriction

Make sure we consider the maximum block count when we tell the block
layer about the maximum sector count. That way we don't have to chop
up the request ourselves.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agosdio: give sdio irq thread a host specific name
Pierre Ossman [Sun, 31 Aug 2008 11:42:00 +0000 (13:42 +0200)]
sdio: give sdio irq thread a host specific name

There is one thread per host controller so make sure they all get
unique names.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agosdio: make sleep on error interruptable
Pierre Ossman [Sun, 31 Aug 2008 11:38:54 +0000 (13:38 +0200)]
sdio: make sleep on error interruptable

Make sure we can be woken from the forced sleep that is done on errors.
Removing a card often results in -ENOMEDIUM or -EILSEQ so we previously
locked up the removal process for a second.

We could completely exit on -ENOMEDIUM, but it might be a transient
glitch so treat it like any other error.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agosdhci: reduce card detection delay
Pierre Ossman [Mon, 18 Aug 2008 20:18:14 +0000 (22:18 +0200)]
sdhci: reduce card detection delay

The card detection delay was added early when the behaviour of the
card interrupt was still very much unknown (i.e. before there was a
public specification). As it is now known that it is a debounced signal,
reduce the delay to something more sensible.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agosdhci: let the controller wait for busy state to end
Pierre Ossman [Thu, 24 Jul 2008 23:09:08 +0000 (01:09 +0200)]
sdhci: let the controller wait for busy state to end

The sdhci controllers can interrupt us when the busy state from the
card has ended, saving CPU cycles and power.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
16 years agosmc911x: Fix external PHY detection
Guennadi Liakhovetski [Sat, 11 Oct 2008 22:07:16 +0000 (15:07 -0700)]
smc911x: Fix external PHY detection

If an external PHY is found the driver falls through to the default
case in the switch and overwrites the PHY ID. Add the missing break.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Sat, 11 Oct 2008 20:23:48 +0000 (13:23 -0700)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (43 commits)
  ext4: Rename ext4dev to ext4
  ext4: Avoid double dirtying of super block in ext4_put_super()
  Update ext4 MAINTAINERS file
  Hook ext4 to the vfs fiemap interface.
  generic block based fiemap implementation
  ocfs2: fiemap support
  vfs: vfs-level fiemap interface
  ext4: fix xattr deadlock
  jbd2: Fix buffer head leak when writing the commit block
  ext4: Add debugging markers that can be used by systemtap
  jbd2: abort instead of waiting for nonexistent transaction
  ext4: fix initialization of UNINIT bitmap blocks
  ext4: Remove old legacy block allocator
  ext4: Use readahead when reading an inode from the inode table
  ext4: Improve the documentation for ext4's /proc tunables
  ext4: Combine proc file handling into a single set of functions
  ext4: move /proc setup and teardown out of mballoc.c
  ext4: Don't use 'struct dentry' for internal lookups
  ext4/jbd2: Avoid WARN() messages when failing to write to the superblock
  ext4: use percpu data structures for lg_prealloc_list
  ...

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Sat, 11 Oct 2008 20:22:33 +0000 (13:22 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (71 commits)
  ide: Remove ide_spin_wait_hwgroup() and use special requests instead
  ide: move IDE{FLOPPY,TAPE}_WAIT_CMD defines to <linux/ide.h>
  ide: add ide_do_test_unit_ready() helper
  ide: add ide_do_start_stop() helper
  ide: add ide_set_media_lock() helper
  ide-floppy: move floppy ioctls handling to ide-floppy_ioctl.c
  ide-floppy: ->{srfp,wp} -> IDE_AFLAG_{SRFP,WP}
  ide: add ide_queue_pc_tail() helper
  ide: add ide_queue_pc_head() helper
  ide: add ide_init_pc() helper
  ide-tape: add ide_tape_set_media_lock() helper
  ide-floppy: add ide_floppy_set_media_lock() helper
  ide: add ide_io_buffers() helper
  ide-scsi: cleanup ide_scsi_io_buffers()
  ide-floppy: remove MODE_SENSE_* defines
  ide-{floppy,tape}: remove packet command stack
  ide-{floppy,tape}: remove request stack
  ide-generic: handle probing of legacy io-ports v5
  ide-floppy: use scatterlists for pio transfers
  ide-tape: remove idetape_init_rq()
  ...

16 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
David S. Miller [Sat, 11 Oct 2008 19:39:35 +0000 (12:39 -0700)]
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

sound/core/memalloc.c

16 years agoe1000: allow VLAN devices to use TSO and CSUM offload
Patrick McHardy [Sat, 11 Oct 2008 19:25:59 +0000 (12:25 -0700)]
e1000: allow VLAN devices to use TSO and CSUM offload

This patch changes e1000 to set vlan_features so TSO and CSUM
offload can be used by VLAN devices, similar as with the other
Intel drivers.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agogre: Initialise rtnl_link tunnel parameters properly
Herbert Xu [Sat, 11 Oct 2008 19:20:15 +0000 (12:20 -0700)]
gre: Initialise rtnl_link tunnel parameters properly

Brown paper bag error of calling memset with sizeof(p) instead
of sizeof(*p).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoipvs: Add proper dependencies on IP_VS, and fix description header line.
David S. Miller [Sat, 11 Oct 2008 19:18:04 +0000 (12:18 -0700)]
ipvs: Add proper dependencies on IP_VS, and fix description header line.

Linus noted a build failure case:

net/netfilter/ipvs/ip_vs_xmit.c: In function 'ip_vs_tunnel_xmit':
net/netfilter/ipvs/ip_vs_xmit.c:616: error: implicit declaration of function 'ip_select_ident'

The proper include file (net/ip.h) is being included in ip_vs_xmit.c to get
that declaration.  So the only possible case where this can happen is if
CONFIG_INET is not enabled.

This seems to be purely a missing dependency in the ipvs/Kconfig file IP_VS
entry.

Also, while we're here, remove the out of date "EXPERIMENTAL" string in the
IP_VS config help header line.  IP_VS no longer depends upon CONFIG_EXPERIMENTAL

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge phase #4 (X2APIC, APIC unification, CPU identification unification) of git...
Linus Torvalds [Sat, 11 Oct 2008 18:47:30 +0000 (11:47 -0700)]
Merge phase #4 (X2APIC, APIC unification, CPU identification unification) of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-v28-for-linus-phase4-D' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (186 commits)
  x86, debug: print more information about unknown CPUs
  x86 setup: handle more than 8 CPU flag words
  x86: cpuid, fix typo
  x86: move transmeta cap read to early_init_transmeta()
  x86: identify_cpu_without_cpuid v2
  x86: extended "flags" to show virtualization HW feature in /proc/cpuinfo
  x86: move VMX MSRs to msr-index.h
  x86: centaur_64.c remove duplicated setting of CONSTANT_TSC
  x86: intel.c put workaround for old cpus together
  x86: let intel 64-bit use intel.c
  x86: make intel_64.c the same as intel.c
  x86: make intel.c have 64-bit support code
  x86: little clean up of intel.c/intel_64.c
  x86: make 64 bit to use amd.c
  x86: make amd_64 have 32 bit code
  x86: make amd.c have 64bit support code
  x86: merge header in amd_64.c
  x86: add srat_detect_node for amd64
  x86: remove duplicated force_mwait
  x86: cpu make amd.c more like amd_64.c v2
  ...

16 years agoMerge branch 'x86/unify-cpu-detect' into x86-v28-for-linus-phase4-D
Ingo Molnar [Sat, 11 Oct 2008 18:23:20 +0000 (20:23 +0200)]
Merge branch 'x86/unify-cpu-detect' into x86-v28-for-linus-phase4-D

Conflicts:
arch/x86/kernel/cpu/common.c
arch/x86/kernel/signal_64.c
include/asm-x86/cpufeature.h

16 years agoMerge branch 'x86/apic' into x86-v28-for-linus-phase4-B
Ingo Molnar [Fri, 10 Oct 2008 17:50:00 +0000 (19:50 +0200)]
Merge branch 'x86/apic' into x86-v28-for-linus-phase4-B

Conflicts:
arch/x86/kernel/apic_32.c
arch/x86/kernel/apic_64.c
arch/x86/kernel/setup.c
drivers/pci/intel-iommu.c
include/asm-x86/cpufeature.h
include/asm-x86/dma-mapping.h

16 years agoMerge phase #3 (IOMMU) of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux...
Linus Torvalds [Sat, 11 Oct 2008 18:03:09 +0000 (11:03 -0700)]
Merge phase #3 (IOMMU) of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-v28-for-linus-phase3-B' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits)
  AMD IOMMU: use iommu_device_max_index, fix
  AMD IOMMU: use iommu_device_max_index
  x86: add PCI IDs for AMD Barcelona PCI devices
  x86/iommu: use __GFP_ZERO instead of memset for GART
  x86/iommu: convert GART need_flush to bool
  x86/iommu: make GART driver checkpatch clean
  x86 gart: remove unnecessary initialization
  x86: restore old GART alloc_coherent behavior
  revert "x86: make GART to respect device's dma_mask about virtual mappings"
  x86: export pci-nommu's alloc_coherent
  iommu: remove fullflush and nofullflush in IOMMU generic option
  x86: remove set_bit_string()
  iommu: export iommu_area_reserve helper function
  AMD IOMMU: use coherent_dma_mask in alloc_coherent
  add AMD IOMMU tree to MAINTAINERS file
  AMD IOMMU: use cmd_buf_size when freeing the command buffer
  AMD IOMMU: calculate IVHD size with a function
  AMD IOMMU: remove unnecessary cast to u64 in the init code
  AMD IOMMU: free domain bitmap with its allocation order
  AMD IOMMU: simplify dma_mask_to_pages
  ...

16 years agoMerge phase #2 (PAT updates) of git://git.kernel.org/pub/scm/linux/kernel/git/tip...
Linus Torvalds [Sat, 11 Oct 2008 17:59:00 +0000 (10:59 -0700)]
Merge phase #2 (PAT updates) of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-v28-for-linus-phase2-B' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits)
  x86, cpa: make the kernel physical mapping initialization a two pass sequence, fix
  x86, pat: cleanups
  x86: fix pagetable init 64-bit breakage
  x86: track memtype for RAM in page struct
  x86, cpa: srlz cpa(), global flush tlb after splitting big page and before doing cpa
  x86, cpa: remove cpa pool code
  x86, cpa: no need to check alias for __set_pages_p/__set_pages_np
  x86, cpa: dont use large pages for kernel identity mapping with DEBUG_PAGEALLOC
  x86, cpa: make the kernel physical mapping initialization a two pass sequence
  x86, cpa: remove USER permission from the very early identity mapping attribute
  x86, cpa: rename PTE attribute macros for kernel direct mapping in early boot
  x86: make sure the CPA test code's use of _PAGE_UNUSED1 is obvious
  linux-next: fix x86 tree build failure
  x86: have set_memory_array_{uc,wb} coalesce memtypes, fix
  agp: enable optimized agp_alloc_pages methods
  x86: have set_memory_array_{uc,wb} coalesce memtypes.
  x86: {reverve,free}_memtype() take a physical address
  x86: fix pageattr-test
  agp: add agp_generic_destroy_pages()
  agp: generic_alloc_pages()
  ...

16 years agoMerge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sat, 11 Oct 2008 17:09:45 +0000 (10:09 -0700)]
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits)
  [ARM] 5300/1: fixup spitz reset during boot
  [ARM] 5295/1: make ZONE_DMA optional
  [ARM] 5239/1: Palm Zire 72 power management support
  [ARM] 5298/1: Drop desc_handle_irq()
  [ARM] 5297/1: [KS8695] Fix two compile-time warnings
  [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.
  [ARM] pxa: allow multi-machine PCMCIA builds
  [ARM] pxa: add preliminary CPUFREQ support for PXA3xx
  [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h
  [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c
  [ARM] pxa/zylonite: add support for USB OHCI
  [ARM] ohci-pxa27x: use ioremap() and offset for register access
  [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
  [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource
  [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver
  [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
  [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c
  [ARM] pxa: simplify DMA register definitions
  [ARM] pxa: make additional DCSR bits valid for PXA3xx
  [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c
  ...

Fixed up conflicts in
arch/arm/mach-versatile/core.c
sound/soc/pxa/pxa2xx-ac97.c
sound/soc/pxa/pxa2xx-i2s.c
manually.

16 years agosecurity: avoid calling a NULL function pointer in drivers/video/tvaudio.c
Arjan van de Ven [Sat, 11 Oct 2008 04:16:12 +0000 (21:16 -0700)]
security: avoid calling a NULL function pointer in drivers/video/tvaudio.c

NULL function pointers are very bad security wise. This one got caught by
kerneloops.org quite a few times, so it's happening in the field....

Fix is simple, check the function pointer for NULL, like 6 other places
in the same function are already doing.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agonet: fix dummy 'nf_conntrack_event_cache()'
Linus Torvalds [Sat, 11 Oct 2008 16:46:24 +0000 (09:46 -0700)]
net: fix dummy 'nf_conntrack_event_cache()'

The dummy version of 'nf_conntrack_event_cache()' (used when the
NF_CONNTRACK_EVENTS config option is not enabled) had not been updated
when the calling convention changed.

This was introduced by commit a71996fccce4b2086a26036aa3c915365ca36926
("netfilter: netns nf_conntrack: pass conntrack to
nf_conntrack_event_cache() not skb")

Tssk.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
Linus Torvalds [Sat, 11 Oct 2008 16:33:18 +0000 (09:33 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1075 commits)
  myri10ge: update driver version number to 1.4.3-1.369
  r8169: add shutdown handler
  r8169: preliminary 8168d support
  r8169: support additional 8168cp chipset
  r8169: change default behavior for mildly identified 8168c chipsets
  r8169: add a new 8168cp flavor
  r8169: add a new 8168c flavor (bis)
  r8169: add a new 8168c flavor
  r8169: sync existing 8168 device hardware start sequences with vendor driver
  r8169: 8168b Tx performance tweak
  r8169: make room for more specific 8168 hardware start procedure
  r8169: shuffle some registers handling around (8168 operation only)
  r8169: new phy init parameters for the 8168b
  r8169: update phy init parameters
  r8169: wake up the PHY of the 8168
  af_key: fix SADB_X_SPDDELETE response
  ath9k: Fix return code when ath9k_hw_setpower() fails on reset
  ath9k: remove nasty FAIL macro from ath9k_hw_reset()
  gre: minor cleanups in netlink interface
  gre: fix copy and paste error
  ...