David Brownell [Wed, 6 Feb 2008 09:38:45 +0000 (01:38 -0800)]
rtc-cmos alarm acts as oneshot
Start making the rtc-cmos alarm act more like a oneshot alarm by disabling
that alarm after its IRQ fires. (ACPI hooks are also needed.)
The Linux RTC framework has previously been a bit vague in this area, but
any other behavior is problematic and not very portable. RTCs with full
YYYY-MM-DD HH:MM[:SS] alarms won't have a problem here. Only ones with
partial match criteria, with the most visible example being the PC RTC, get
confused. (Because the criteria will match repeatedly.)
Update comments relating to that oneshot behavior and timezone handling.
(Timezones are another issue that's mostly visible with rtc-cmos. That's
because PCs often dual-boot MS-Windows, which likes its RTC to match local
wall-clock time instead of UTC.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Mundt [Wed, 6 Feb 2008 09:38:44 +0000 (01:38 -0800)]
rtc: ds1302 rtc support
This adds a basic ds1302 RTC driver, which is basically a cleanup and move
of the in-tree SH SecureEdge5410 code (which is currently located in
arch/sh/board/snapgear/rtc.c) to drivers/rtc.
This aims to be a building block that the M32R and CRIS code can be worked
on top of, so we can get rid of drivers/char/ds1302.c and
arch/cris/arch-v10/drivers/ds1302.c respectively, though more work is
needed for this.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Wed, 6 Feb 2008 09:38:43 +0000 (01:38 -0800)]
rtc-cmos: export nvram in sysfs
This makes rtc-cmos export its NVRAM, like several other RTC drivers.
It still works within the limits of the current CMOS_READ/CMOS_WRITE calls,
which don't understand how to access multiple register banks. The primary
impact of that limitation is that Linux can't access the uppermost 128
bytes of NVRAM on many systems.
Note that this isn't aiming to be a drop-in replacement for the legacy
/dev/nvram support. (Presumably that has real users, and isn't just
getting carried forward automatically?) Userspace handles more work:
- When userspace code updates NVRAM, that will need to include
updating any platform-specific checksums that may apply.
- No /proc/driver/nvram file will parse and display NVRAM data
according to whichever boot firmware your board expects.
Also minor pnp-related updates: update a comment, remove dead code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rtc-s3c: Use is_power_of_2() macro for simplicity.
Use is_power_of_2() macro for simplicity.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jean Delvare [Wed, 6 Feb 2008 09:38:41 +0000 (01:38 -0800)]
rtc-pcf8583: Don't abuse I2C_M_NOSTART
The rtc-pcf8583 driver is using the I2C_M_NOSTART flag but shouldn't. This
flag is only meant for broken chips and the PCF8583 RTC chip is not one of
these.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miklos Szeredi [Wed, 6 Feb 2008 09:38:39 +0000 (01:38 -0800)]
fuse: limit queued background requests
Libfuse basically creates a new thread for each new request. This is fine for
synchronous requests, which are naturally limited. However background
requests (especially writepage) can cause a thread creation storm.
To avoid this, limit the number of background requests available to userspace.
This is done by introducing another queue for background requests, and a
counter for the number of "active" requests, which are currently available for
userspace.
Eric Sandeen [Wed, 6 Feb 2008 09:38:37 +0000 (01:38 -0800)]
ecryptfs: check for existing key_tfm at mount time
Jeff Moyer pointed out that a mount; umount loop of ecryptfs, with the same
cipher & other mount options, created a new ecryptfs_key_tfm_cache item
each time, and the cache could grow quite large this way.
Looking at this with mhalcrow, we saw that ecryptfs_parse_options()
unconditionally called ecryptfs_add_new_key_tfm(), which is what was adding
these items.
Refactor ecryptfs_get_tfm_and_mutex_for_cipher_name() to create a new
helper function, ecryptfs_tfm_exists(), which checks for the cipher on the
cached key_tfm_list, and sets a pointer to it if it exists. This can then
be called from ecryptfs_parse_options(), and new key_tfm's can be added
only when a cached one is not found.
With list locking changes suggested by akpm.
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Sandeen [Wed, 6 Feb 2008 09:38:34 +0000 (01:38 -0800)]
ecryptfs: remove debug as mount option, and warn if set via modprobe
ecryptfs_debug really should not be a mount option; it is not per-mount,
but rather sets a global "ecryptfs_verbosity" variable which affects all
mounted filesysytems. It's already settable as a module load option,
I think we can leave it at that.
Also, if set, since secret values come out in debug messages, kick
things off with a stern warning.
Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Mike Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Sandeen [Wed, 6 Feb 2008 09:38:34 +0000 (01:38 -0800)]
ecryptfs: make show_options reflect actual mount options
Change ecryptfs_show_options to reflect the actual mount options in use.
Note that this does away with the "dir=" output, which is not a valid mount
option and appears to be unused.
Mount options such as "ecryptfs_verbose" and "ecryptfs_xattr_metadata" are
somewhat indeterminate for a given fs, but in any case the reported mount
options can be used in a new mount command to get the same behavior.
[akpm@linux-foundation.org: fix printk warning] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trevor Highland [Wed, 6 Feb 2008 09:38:33 +0000 (01:38 -0800)]
eCryptfs: set inode key only once per crypto operation
There is no need to keep re-setting the same key for any given eCryptfs inode.
This patch optimizes the use of the crypto API and helps performance a bit.
Signed-off-by: Trevor Highland <trevor.highland@gmail.com> Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Halcrow [Wed, 6 Feb 2008 09:38:32 +0000 (01:38 -0800)]
eCryptfs: track header bytes rather than extents
Remove internal references to header extents; just keep track of header bytes
instead. Headers can easily span multiple pages with the recent persistent
file changes.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Wed, 6 Feb 2008 09:38:32 +0000 (01:38 -0800)]
fs/ecryptfs/: possible cleanups
- make the following needlessly global code static:
- crypto.c:ecryptfs_lower_offset_for_extent()
- crypto.c:key_tfm_list
- crypto.c:key_tfm_list_mutex
- inode.c:ecryptfs_getxattr()
- main.c:ecryptfs_init_persistent_file()
- remove the no longer used mmap.c:ecryptfs_lower_page_cache
- #if 0 the unused read_write.c:ecryptfs_read()
Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Wed, 6 Feb 2008 09:38:31 +0000 (01:38 -0800)]
drivers/isdn/hardware/eicon/debug.c: fix uninitialized var warning
drivers/isdn/hardware/eicon/debug.c: In function 'SuperTraceASSIGN':
drivers/isdn/hardware/eicon/debug.c:1191: warning: 'rx_dma_magic' may be used uninitialized in this function
Tilman Schmidt [Wed, 6 Feb 2008 09:38:30 +0000 (01:38 -0800)]
ser_gigaset: convert mutex to completion
The ser_gigaset ISDN driver was using a mutex in its close() method for
waiting for other running ldisc methods to finish. That's what completions
are for. Incidentally, this also avoids a spurious "BUG: lock held at task
exit time" message when the driver's userspace daemon daemonizes itself.
Tilman Schmidt [Wed, 6 Feb 2008 09:38:27 +0000 (01:38 -0800)]
usb_gigaset: suspend support
Add basic suspend/resume support to the usb_gigaset driver for the Siemens
Gigaset M105 USB DECT adapter.
Only the USB aspects are handled so far; the ISDN subsystem is not notified in
any way, for lack of information about how to do that. The driver does not
check for active connections before suspending. They will be dropped when the
device loses USB power.
Tilman Schmidt [Wed, 6 Feb 2008 09:38:26 +0000 (01:38 -0800)]
bas_gigaset: suspend support
Add basic suspend/resume support to the bas_gigaset ISDN driver for the
Siemens Gigaset SX255 series of ISDN DECT bases.
Only the USB aspects are handled so far; the ISDN subsystem is not notified in
any way, for lack of information about how to do that. The driver will refuse
to suspend if a connection is active.
Tilman Schmidt [Wed, 6 Feb 2008 09:38:24 +0000 (01:38 -0800)]
gigaset: code cleanups
Some cleanups to the bas-gigaset and usb-gigaset USB ISDN drivers:
- simplified error handling
- improved debug messages
- readability improvements
- removal of obsolete defines and comments
Abhishek Sagar [Wed, 6 Feb 2008 09:38:22 +0000 (01:38 -0800)]
kprobes: kretprobe user entry-handler
Provide support to add an optional user defined callback to be run at
function entry of a kretprobe'd function. Also modify the kprobe smoke
tests to include an entry-handler during the kretprobe sanity test.
Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Wed, 6 Feb 2008 09:38:21 +0000 (01:38 -0800)]
spi: remove more dev->power.power_state usage
Remove some more references to dev->power.power_state. That field is overdue
for removal, but we can't do that while it's still referenced in the kernel.
The only reason to update it was to make the /sys/devices/.../power/state
files (now removed) work better.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bryan Wu [Wed, 6 Feb 2008 09:38:18 +0000 (01:38 -0800)]
spi_bfin: wait for tx to complete on some cs_chg paths
PBX 2 SPI devices need the nonstandard "cs change per word" mechanism.
This patch is one of three updating this driver to make the last data bits get
sent before advancing the transfer ... in this case, before the chipselect
gets deactivated.
Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bryan Wu [Wed, 6 Feb 2008 09:38:17 +0000 (01:38 -0800)]
spi_bfin: use more useful GPIO labels
Use the SPI driver's name when requesting gpio lines. When there are gpio
conflicts, this helps to narrow down the problems; "bfin-spi" is not
informative.
Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Girish [Wed, 6 Feb 2008 09:38:16 +0000 (01:38 -0800)]
spi: omap2_mcspi handles omap3 too
This adds driver OMAP SPI specific changes to support OMAP 3430
Signed-off-by: Girish S G <girishsg@ti.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Magnus Damm [Wed, 6 Feb 2008 09:38:15 +0000 (01:38 -0800)]
spi: SuperH SPI using SCI
Add support for SPI over SCI pins. SCI is a very simple serial controller
block that can be found on older SuperH processors. In theory it is
possible to use the SCI hardware block in syncronous mode, but this version
of the driver simply hooks up the bit banging code on the SCI pins.
Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Wed, 6 Feb 2008 09:38:13 +0000 (01:38 -0800)]
spi: s3c drivers shouldn't care about spi_board_info
The two S3C SPI master drivers got merged without much review, so I just
noticed that they're doing something that the SPI core code is responsible
for, rather than any adapter driver: they try to register SPI devices.
This removes that support from those drivers so they act normally.
Interestingly, none of the current boards are affected. So it's a net code
shrink with no loss of functionality.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In atmel_spi_next_xfer, xfer can be NULL because the next transfer may
already have been submitted to the PDC (using DMA chaining). This can
cause an oops, since the debug message assumed it was never null. The
fix changes how those debug messages are issued, ensuring that one is
issued each time a transfer is started instead of once per call.
Also, properly indent the "can this transfer be chained" test so it's
not hidden as if it were non-conditional code.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Silvester Erdeg [Wed, 6 Feb 2008 09:38:12 +0000 (01:38 -0800)]
atmel_spi: chain DMA transfers
Add support for chained transfers in the atmel_spi driver, letting the DMA
controller switch to the next buffer pair without CPU intervention. This
reduced I/O latencies by about 2% in one bulk I/O test. It should also help
work around several interrelated errata affecting chipselect 0 on at91rm9200
chips.
Almost all of the changes are in the reworked atmel_spi_next_xfer() function.
That's now called with the driver in one of three states:
1. It isn't transferring anything (in which case the first transfer
of the current message is going to be sent)
2. It has finished transfering a non-chainable transfer (in which
case it will go to the next transfer in the message)
3. It has finished transfering a chained transfer (in which case the
next transfer is already queued)
After that it will queue the next transfer if it can be chained.
Signed-off-by: Szilveszter Ordog <slipszi@gmail.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't insert (undesirable) delays between consecutive words (DLYBCT) or when
activating chipselects (DLYBS).
Removing the between-word delays improves the performance of bulk transfers
(such as mtd_dataflash, m25p80, mmc_spi) significantly. In one test, the
improvement was a factor of more than eight!
(The large DLYBCT value came from the legacy at91 SPI driver, and it's not
clear why it used such a huge value.)
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Wed, 6 Feb 2008 09:38:10 +0000 (01:38 -0800)]
spi core: stop updating dev->power.power_state
Don't update dev->power.power_state any more in the SPI core. The only
reason to update this scheduled-to-be-removed field was to make the
already-removed /sys/devices/.../power/state files work better.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Driver core: convert block from raw kobjects to core devices
This moves the block devices to /sys/class/block. It will create a
flat list of all block devices, with the disks and partitions in one
directory. For compatibility /sys/block is created and contains symlinks
to the disks.
introduced a global disk_type variable in <linux/genhd.h>, causing the
following compile error on Atari:
drivers/block/ataflop.c:93: error: conflicting types for 'disk_type'
include/linux/genhd.h:21: error: previous declaration of 'disk_type' was here
Rename the local disk_type variable in drivers/block/ataflop.c to
atari_disk_type, to avoid the conflict.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Fries [Wed, 6 Feb 2008 09:38:09 +0000 (01:38 -0800)]
W1: w1_therm.c standardize units to millidegrees C
Standardize the temperature units to millidegrees C for the two sensor
conversion routines. Previously the routines were,
w1_DS18B20_convert_temp degrees C
w1_DS18S20_convert_temp millidegrees C
Unfortunately this will break any program using the ds18b20 value as it
will now be 1000 times bigger. Fortunately there can't be that many users
out there, or some of these bugs will have been fixed by now, such as the
negative C error (see previous patch) that makes me think the ds18b20 is
the better choice to change because of the current bugs.
Signed-off-by: David Fries <david@fries.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Fries [Wed, 6 Feb 2008 09:38:04 +0000 (01:38 -0800)]
system timer: fix crash in <100Hz system timer
The kernel has a divide by zero crash when trying to run the system timer
less than 100Hz. The problem is x/(HZ/USER_HZ) and related. Now
x*(USER_HZ/HZ) will be used if HZ<USER_HZ.
I'm running the Linux kernel under qemu and went to run a slower system
timer to take less CPU (and battery) on the host. I found that the kernel
paniced under emulation because of a divide by zero in three places. Here
is the patch. The base git was updated today 01-05-2008. I went for a
20Hz system time by adding config HZ_20 etc to kernel/Kconfig.hz. With
this patch I verified the system timer by looking at /proc/interrupts.
[akpm@linux-foundation.org: partially clean up the macro maze] Signed-off-by: David Fries <david@fries.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joern Engel [Wed, 6 Feb 2008 09:38:02 +0000 (01:38 -0800)]
Claim maintainership for block2mtd and update email addresses
I have been prime author and maintainer of block2mtd from day one, but
neither MAINTAINERS nor the module source makes this fact clear. And while
I'm at it, update my email addresses tree-wide, as the old address
currently bounces and change my name to "joern" as unicode will likely
continue to cause trouble until the end of this century.
Signed-off-by: Joern Engel <joern@lazybastard.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Karsten Wiese [Wed, 6 Feb 2008 09:37:59 +0000 (01:37 -0800)]
make sys_poll() wait at least timeout ms
schedule_timeout(jiffies) waits for at least jiffies - 1. Add 1 jiffie to
the timeout_jiffies calculated in sys_poll() to wait at least
timeout_msecs, like poll() manpage says.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Peterson [Wed, 6 Feb 2008 09:37:59 +0000 (01:37 -0800)]
Fix IXANY and restart after signal (e.g. ctrl-C) in n_tty line discipline
Fix two N_TTY line discipline issues related to resuming a stopped TTY
(typically done with ctrl-S):
1) Fix handling of character that resumes a stopped TTY (with IXANY)
With "stty ixany", the TTY line discipline would lose the first character
after the stop, so typing, for example, "hi^Sthere" resulted in "hihere"
(the 't' would cause the resume after ^S, but it would then be thrown away
rather than processed as an input character). This was inconsistent with
the behavior of other Unix systems.
2) Fix interrupt signal (e.g. ctrl-C) behavior in stopped TTYs
With "stty -ixany" (often the default), interrupt signals were ignored
in a stopped TTY until the TTY was resumed with the start char (typically
ctrl-Q), which was inconsistent with the behavior of other Unix systems.
Signed-off-by: Joe Peterson <joe@skyrush.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Wed, 6 Feb 2008 09:37:57 +0000 (01:37 -0800)]
Use ilog2() in fs/namespace.c
We can use ilog2() in fs/namespace.c to compute hash_bits and hash_mask at
compile time, not runtime.
[akpm@linux-foundation.org: clean it all up] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Wed, 6 Feb 2008 09:37:56 +0000 (01:37 -0800)]
kernel/sys.c: get rid of expensive divides in groups_sort()
groups_sort() can be quite long if user loads a large gid table.
This is because GROUP_AT(group_info, some_integer) uses an integer divide.
So having to do XXX thousand divides during one syscall can lead to very
high latencies. (NGROUPS_MAX=65536)
In the past (25 Mar 2006), an analog problem was found in groups_search()
(commit d74beb9f33a5f16d2965f11b275e401f225c949d ) and at that time I
changed some variables to unsigned int.
I believe that a more generic fix is to make sure NGROUPS_PER_BLOCK is
unsigned.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Wed, 6 Feb 2008 09:37:51 +0000 (01:37 -0800)]
calibrate_delay() must be __cpuinit
calibrate_delay() must be __cpuinit, not __{dev,}init.
I've verified that this is correct for all users.
While doing the latter, I also did the following cleanups:
- remove pointless additional prototypes in C files
- ensure all users #include <linux/delay.h>
This fixes the following section mismatches with CONFIG_HOTPLUG=n,
CONFIG_HOTPLUG_CPU=y:
WARNING: vmlinux.o(.text+0x1128d): Section mismatch: reference to .init.text.1:calibrate_delay (between 'check_cx686_slop' and 'set_cx86_reorder')
WARNING: vmlinux.o(.text+0x25102): Section mismatch: reference to .init.text.1:calibrate_delay (between 'smp_callin' and 'cpu_coregroup_map')
Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Christian Zankel <chris@zankel.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On loading only one serial port was present and it wasn't working. After
looking in the data sheet I realized that the base address was wrong. For
further reference here is lspci and relevant dmesg output:
02:00.0 Communication controller: NetMos Technology PCI 9855 Multi-I/O
Controller (rev 01) (prog-if 02)
Subsystem: LSI Logic / Symbios Logic Unknown device 0022
Flags: medium devsel, IRQ 19
I/O ports at df00 [size=8]
I/O ports at de00 [size=8]
I/O ports at dd00 [size=8]
I/O ports at dc00 [size=8]
I/O ports at db00 [size=8]
I/O ports at da00 [size=16]
parport1: PC-style at 0xdd00 [PCSPP,TRISTATE]
parport2: PC-style at 0xdf00 [PCSPP,TRISTATE,EPP]
0000:02:00.0: ttyS0 at I/O 0xdb00 (irq = 19) is a 16550A
0000:02:00.0: ttyS1 at I/O 0xda00 (irq = 19) is a 16550A
Signed-off-by: Christian Pellegrin <chripell@fsfe.org> Cc: Thomas Richter <thor@math.TU-Berlin.DE> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Martin Schitter <ms@gewi.kfunigraz.ac.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I converted some of the document to reflect mutex usage instead of
semaphore usage. Since we shouldin't be promoting semaphore usage when
it's on it's way out..
Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Peterson [Wed, 6 Feb 2008 09:37:38 +0000 (01:37 -0800)]
tty: enable the echoing of ^C in the N_TTY discipline
Turn on INTR/QUIT/SUSP echoing in the N_TTY line discipline (e.g. ctrl-C
will appear as "^C" if stty echoctl is set and ctrl-C is set as INTR).
Linux seems to be the only unix-like OS (recently I've verified this on
Solaris, BSD, and Mac OS X) that does *not* behave this way, and I really
miss this as a good visual confirmation of the interrupt of a program in
the console or xterm. I remember this fondly from many Unixs I've used
over the years as well. Bringing this to Linux also seems like a good way
to make it yet more compliant with standard unix-like behavior.
[akpm@linux-foundation.org: coding-style fixes] Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roland McGrath [Wed, 6 Feb 2008 09:37:37 +0000 (01:37 -0800)]
Add arch_ptrace_stop
This adds support to allow asm/ptrace.h to define two new macros,
arch_ptrace_stop_needed and arch_ptrace_stop. These control special
machine-specific actions to be done before a ptrace stop. The new code
compiles away to nothing when the new macros are not defined. This is the
case on all machines to begin with.
On ia64, these macros will be defined to solve the long-standing issue of
ptrace vs register backing store.
Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 6 Feb 2008 09:37:36 +0000 (01:37 -0800)]
quota: improve inode list scanning in add_dquot_ref()
We restarted scan of sb->s_inodes list whenever we had to drop inode_lock
in add_dquot_ref(). This leads to overall quadratic running time and thus
add_dquot_ref() can take several minutes when called on a life filesystem.
We fix the problem by using the fact that inode cannot be removed from
s_inodes list while we hold a reference to it and thus we can safely
restart the scan if we don't drop the reference. Here we use the fact that
inodes freshly added to s_inodes list are already guaranteed to have quotas
properly initialized and the ordering of inodes on s_inodes list does not
change so we cannot skip any inode.
Thanks goes to Nick <gentuu@gmail.com> for analyzing the problem and
testing the fix.
[akpm@linux-foundation.org: iput(NULL) is legal] Signed-off-by: Jan Kara <jack@suse.cz> Cc: Nick <gentuu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Denis Cheng [Wed, 6 Feb 2008 09:37:35 +0000 (01:37 -0800)]
drivers/char: use LIST_HEAD instead of LIST_HEAD_INIT
single list_head variable initialized with LIST_HEAD_INIT could almost
always can be replaced with LIST_HEAD declaration, this shrinks the code
and looks better.
Signed-off-by: Denis Cheng <crquan@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paulo Marques [Wed, 6 Feb 2008 09:37:33 +0000 (01:37 -0800)]
kallsyms should prefer non weak symbols
When resolving symbol names from addresses with aliased symbol names,
kallsyms_lookup always returns the first symbol, even if it is a weak
symbol.
This patch changes this by sorting the symbols with the weak symbols last
before feeding them to the kernel. This way the kernel runtime isn't
changed at all, only the kallsyms build system is changed.
Another side effect is that the symbols get sorted by address, too. So,
even if future binutils version have some bug in "nm" that makes it fail to
correctly sort symbols by address, the kernel won't be affected by this.
Mathieu says:
I created a module in LTTng that uses kallsyms to get the symbol
corresponding to a specific system call address. Unfortunately, all the
unimplemented syscalls were all referring to the (same) weak symbol
identifying an unrelated system call rather that sys_ni (or whatever
non-weak symbol would be expected). Kallsyms was dumbly returning the first
symbol that matched.
This patch makes sure kallsyms returns the non-weak symbol when there is
one, which seems to be the expected result.
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Looks-great-to: Rusty Russell <rusty@rustcorp.com.au> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Drake [Wed, 6 Feb 2008 09:37:30 +0000 (01:37 -0800)]
Documentation about unaligned memory access
Here's a document I wrote after figuring out what unaligned memory access
is all about. I've tried to cover the information I was looking for when
trying to learn about this, without producing a hopelessly detailed/complex
spew. I hope it is useful to others.
Signed-off-by: Daniel Drake <dsd@gentoo.org> Cc: Rob Landley <rob@landley.net> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jan Engelhardt <jengelh@computergmbh.de> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Kyle Moffett <mrmacman_g4@mac.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Piggin [Wed, 6 Feb 2008 09:37:29 +0000 (01:37 -0800)]
inotify: remove debug code
The inotify debugging code is supposed to verify that the
DCACHE_INOTIFY_PARENT_WATCHED scalability optimisation does not result in
notifications getting lost nor extra needless locking generated.
Unfortunately there are also some races in the debugging code. And it isn't
very good at finding problems anyway. So remove it for now.
Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Robert Love <rlove@google.com> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Jan Kara <jack@ucw.cz> Cc: Yan Zheng <yanzheng@21cn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Piggin [Wed, 6 Feb 2008 09:37:28 +0000 (01:37 -0800)]
inotify: fix race
There is a race between setting an inode's children's "parent watched" flag
when placing the first watch on a parent, and instantiating new children of
that parent: a child could miss having its flags set by
set_dentry_child_flags, but then inotify_d_instantiate might still see
!inotify_inode_watched.
The solution is to set_dentry_child_flags after adding the watch. Locking is
taken care of, because both set_dentry_child_flags and inotify_d_instantiate
hold dcache_lock and child->d_locks.
Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Robert Love <rlove@google.com> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Jan Kara <jack@ucw.cz> Cc: Yan Zheng <yanzheng@21cn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove superfluous checks for CONFIG_BLK_DEV_INITRD from initramfs.c
Given that init/Makefile includes initramfs.c in the build only if
CONFIG_BLK_DEV_INITRD is defined, there seems to be no point checking for
it yet again.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove rcu_assign_pointer() penalty for NULL pointers
The rcu_assign_pointer() primitive currently unconditionally executes a
memory barrier, even when a NULL pointer is being assigned. This has lead
some to avoid using rcu_assign_pointer() for NULL pointers, which loses the
self-documenting advantages of rcu_assign_pointer() This patch uses
__builtin_const_p() to omit needless memory barriers for NULL-pointer
assignments at compile time with no runtime penalty, as discussed in the
following thread:
Tested on x86_64 and ppc64, also compiled the four cases (NULL/non-NULL
and const/non-const) with gcc version 4.1.2, and hand-checked the
assembly output.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Wed, 6 Feb 2008 09:37:19 +0000 (01:37 -0800)]
Fix __const_udelay declaration and definition mismatches
The declaration and implementation of __const_udelay use different
names for the parameter on a number of architectures:
include/asm-avr32/delay.h:15:extern void __const_udelay(unsigned long usecs);
arch/avr32/lib/delay.c:39:inline void __const_udelay(unsigned long xloops)
include/asm-sh/delay.h:15:extern void __const_udelay(unsigned long usecs);
arch/sh/lib/delay.c:22:inline void __const_udelay(unsigned long xloops)
include/asm-m32r/delay.h:15:extern void __const_udelay(unsigned long usecs);
arch/m32r/lib/delay.c:58:void __const_udelay(unsigned long xloops)
include/asm-x86/delay.h:16:extern void __const_udelay(unsigned long usecs);
arch/x86/lib/delay_32.c:82:inline void __const_udelay(unsigned long xloops)
arch/x86/lib/delay_64.c:46:inline void __const_udelay(unsigned long xloops)
The units of the parameter isn't usecs, so that name is definitely
wrong. It's also not exactly loops, so I suppose xloops is an OK
name.
This patch changes these names from usecs to xloops.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Fulghum [Wed, 6 Feb 2008 09:37:18 +0000 (01:37 -0800)]
synclink_gt fix missed serial input signal changes
Fix missed serial input signal changes caused by rereading the serial
status register during interrupt processing. Now processing is performed
on original status register value.
Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6-omap-h63xx.git / log