]> pilppa.com Git - linux-2.6-omap-h63xx.git/log
linux-2.6-omap-h63xx.git
17 years agosky2: safer transmit timeout
Stephen Hemminger [Tue, 6 Feb 2007 18:45:42 +0000 (10:45 -0800)]
sky2: safer transmit timeout

Rather than trying to be "smart" about possible transmit timeout
causes. Just clear all pending frames and reset the PHY.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agosky2: TSO support for EC_U
Stephen Hemminger [Tue, 6 Feb 2007 18:45:41 +0000 (10:45 -0800)]
sky2: TSO support for EC_U

The Yukon EC_U chipset apparently supports TSO but only for non-Jumbo
frame sizes because it lacks a Ram buffer.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agosky2: use dev_err for error reports
Stephen Hemminger [Tue, 6 Feb 2007 18:45:40 +0000 (10:45 -0800)]
sky2: use dev_err for error reports

Use the standard dev_xxx functions instead of printk directly for
error reports. Fix a bug where the initialization would return 0
if allocation of network device failed.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agosky2: add Wake On Lan support
Stephen Hemminger [Tue, 6 Feb 2007 18:45:39 +0000 (10:45 -0800)]
sky2: add Wake On Lan support

Adds basic magic packet wake on lan support to the sky2 driver.
Note: initial WOL value is based on BIOS settings.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agofix unaligned exception in /drivers/net/wireless/orinoco.c
Hennerich, Michael [Tue, 6 Feb 2007 00:41:35 +0000 (16:41 -0800)]
fix unaligned exception in /drivers/net/wireless/orinoco.c

Prevent an unaligned exception to occur.  (GCC 4.1) tmp is defined as char
pointer while it is later accessed as short.

Cc: Jean Tourrilhes <jt@hpl.hp.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoRemove unused kernel config option DLCI_COUNT
Robert P. J. Day [Tue, 6 Feb 2007 00:31:06 +0000 (16:31 -0800)]
Remove unused kernel config option DLCI_COUNT

Remove the unused kernel config option DLCI_COUNT.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Krzysztof Halasa {khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoz85230: spinlock logic
Alan Cox [Tue, 6 Feb 2007 00:31:03 +0000 (16:31 -0800)]
z85230: spinlock logic

At some point someone added a spin_lock(&dev->lock) to the IRQ handler for
the Z85230 driver.  This actually correctly fixes a bug but the necessary
changes to remove the chan->lock calls in the event handlers were not made
(c->lock is the same lock).

Simona Dascenzo reported the problem with the driver and this patch should
fix the problem he found.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agomips: declance: Driver model for the PMAD-A
Maciej W. Rozycki [Tue, 6 Feb 2007 00:28:27 +0000 (16:28 -0800)]
mips: declance: Driver model for the PMAD-A

This is a set of changes that converts the PMAD-A support to the driver model.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet: Rework RX linked list
Linas Vepstas [Tue, 6 Feb 2007 00:29:43 +0000 (16:29 -0800)]
Spidernet: Rework RX linked list

Make the hardware perceive the RX descriptor ring as a null-terminated linked
list, instead of a circular ring.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNET: turn local_save_flags() + local_irq_disable() into local_irq_save()
Jiri Kosina [Tue, 6 Feb 2007 00:29:49 +0000 (16:29 -0800)]
NET: turn local_save_flags() + local_irq_disable() into local_irq_save()

drivers/net/amd8111e.c::amd8111e_poll() contains local_irq_disable() after
local_save_flags().  Turn it into local_irq_save().

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNET-3c59x: turn local_save_flags() + local_irq_disable() into local_irq_save()
Jiri Kosina [Tue, 6 Feb 2007 00:29:48 +0000 (16:29 -0800)]
NET-3c59x: turn local_save_flags() + local_irq_disable() into local_irq_save()

drivers/net/3c59x.c::poll_vortex() contains local_irq_disable() after
local_save_flags().  Turn it into local_irq_save().

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agohp100: convert pci_module_init() to pci_register_driver()
Richard Knutsson [Tue, 6 Feb 2007 00:29:48 +0000 (16:29 -0800)]
hp100: convert pci_module_init() to pci_register_driver()

Convert pci_module_init() to pci_register_driver().

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNetXen: Added ethtool support for user level tools.
Amit S. Kale [Mon, 5 Feb 2007 15:40:49 +0000 (07:40 -0800)]
NetXen: Added ethtool support for user level tools.

NetXen: Added ethtool support for user level firmware management utilities.

Signed-off-by: Amit S. Kale <amitkale@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoNetXen: Firmware crb init changes.
Amit S. Kale [Mon, 5 Feb 2007 15:35:26 +0000 (07:35 -0800)]
NetXen: Firmware crb init changes.

NetXen: firmware crb init changes.

Signed-off-by: Amit S. Kale <amitkale@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agomaintainers: add atl1 maintainers
Jay Cliburn [Sun, 4 Feb 2007 02:25:10 +0000 (20:25 -0600)]
maintainers: add atl1 maintainers

MAINTAINERS: add atl1 maintainers

Add a maintainers entry for atl1.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoskge: version 1.10
Stephen Hemminger [Fri, 2 Feb 2007 16:22:54 +0000 (08:22 -0800)]
skge: version 1.10

Mark this as 1.10 because WOL now works

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoskge: WOL support
Stephen Hemminger [Fri, 2 Feb 2007 16:22:53 +0000 (08:22 -0800)]
skge: WOL support

Add WOL support for Yukon chipsets in skge device.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoskge: use dev_printk
Stephen Hemminger [Fri, 2 Feb 2007 16:22:52 +0000 (08:22 -0800)]
skge: use dev_printk

Use dev_printk related macros for PCI related errors and warnings

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoskge: handle zero address at open
Stephen Hemminger [Fri, 2 Feb 2007 16:22:51 +0000 (08:22 -0800)]
skge: handle zero address at open

Some motherboards are broken and have no address set. Failing at probe time
prevents the device from ever being used (like to download a fixed BIOS). Instead
warn on probe and check again when device is brought up. That way the address
can be set.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agob44 endian annotations
Al Viro [Mon, 29 Jan 2007 20:36:54 +0000 (15:36 -0500)]
b44 endian annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoPA Semi PWRficient Ethernet driver
Olof Johansson [Thu, 1 Feb 2007 03:43:54 +0000 (21:43 -0600)]
PA Semi PWRficient Ethernet driver

Driver for the PA Semi PWRficient on-chip Ethernet (1/10G)

Basic enablement, will be complemented with performance enhancements
over time. PHY support will be added as well.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agos2io: De-typedef driver.
Ralf Baechle [Wed, 31 Jan 2007 19:09:29 +0000 (14:09 -0500)]
s2io: De-typedef driver.

Removed namespace collisions due to usage of nic_t as per Ralf's patch

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agos2io: Removed enabling of some of the unused interrupts.
Sivakumar Subramani [Wed, 31 Jan 2007 19:05:51 +0000 (14:05 -0500)]
s2io: Removed enabling of some of the unused interrupts.

Removed unused code in en_dis_able_nic_intrs(), TX_DMA_INTR, RX_DMA_INTR,
TX_XGXS_INTR, MC_INTR

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agos2io: Fixes in updating skb->truesize and code cleanup.
Sivakumar Subramani [Wed, 31 Jan 2007 18:32:57 +0000 (13:32 -0500)]
s2io: Fixes in updating skb->truesize and code cleanup.

1. Fix for updating skb->truesize properly.
2. Disable NAPI only if more than one ring configured in case of MSI/MSI-X
   interrupts. Previously we were disabling NAPI irrespective of number of
   rings when MSI/MSI-X interrupts were used.
3. Code cleanup.

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2IO: Fixes for reset and link handling.
Sivakumar Subramani [Wed, 31 Jan 2007 18:30:49 +0000 (13:30 -0500)]
S2IO: Fixes for reset and link handling.

1. Fix for reset and link handling.
2. Allow for promiscuos mode and multicast state be maintained through
   ifconfig up and down.
3. Support to print adapter serial number.

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agos2io: Making LRO and UFO as module loadable parameter.
Sivakumar Subramani [Wed, 31 Jan 2007 18:28:08 +0000 (13:28 -0500)]
s2io: Making LRO and UFO as module loadable parameter.

This patch adds two load parameters napi and ufo. Previously NAPI was
compilation option with these changes wan enable disable NAPI using load
parameter. Also we are introducing ufo load parameter to enable/disable
ufo feature

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoPC300too alternative WAN driver
Krzysztof Halasa [Tue, 30 Jan 2007 15:10:24 +0000 (16:10 +0100)]
PC300too alternative WAN driver

The attached patch adds an alternative driver "pc300too" for PCI WAN
cards PC300/RSV and PC300/X21 made by Cyclades Corp. (now Avocent Corp).

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agocxgb3 - Add dual licensing
Divy Le Ray [Wed, 31 Jan 2007 03:44:35 +0000 (19:44 -0800)]
cxgb3 - Add dual licensing

Dual licensing, needed for OFED 1.2

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agocxgb3 - Add <linux/mutex.h>
Divy Le Ray [Wed, 31 Jan 2007 03:44:29 +0000 (19:44 -0800)]
cxgb3 - Add <linux/mutex.h>

Include <linux/mutex.h> in adapter.h

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agocxgb3 - Remove BUG_ON from t3b_intr_napi
Divy Le Ray [Wed, 31 Jan 2007 03:44:18 +0000 (19:44 -0800)]
cxgb3 - Remove BUG_ON from t3b_intr_napi

In some cases, SG_DATA_INTR won't clear on read and the following
interrupt may cause us to assert because NAPI is already scheduled.
Remove the assertion, NAPI can handle attempts to rearm it while
it's already scheduled.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agocxgb3 - white space to tabs
Divy Le Ray [Wed, 31 Jan 2007 03:44:13 +0000 (19:44 -0800)]
cxgb3 - white space to tabs

Use tabs in comments.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agocxgb3 - Clean up HW init routine
Divy Le Ray [Wed, 31 Jan 2007 03:44:07 +0000 (19:44 -0800)]
cxgb3 - Clean up HW init routine

Clean up the tp_config() routine.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agocxgb3 - bogus status error string
Divy Le Ray [Wed, 31 Jan 2007 03:44:01 +0000 (19:44 -0800)]
cxgb3 - bogus status error string

Remove a status error string from the pci-x context
and add it where it belongs - the pci-e context.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agocxgb3 - remove SW Tx credits coalescing
Divy Le Ray [Wed, 31 Jan 2007 03:43:56 +0000 (19:43 -0800)]
cxgb3 - remove SW Tx credits coalescing

Remove tx credit coalescing done in SW.
The HW is caring care of it already.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agocxgb3 - bind qsets on multiport adapter
Divy Le Ray [Wed, 31 Jan 2007 03:43:50 +0000 (19:43 -0800)]
cxgb3 - bind qsets on multiport adapter

Inform FW about the queue set->interface mapping.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agocxgb3 - FW versioning
Divy Le Ray [Wed, 31 Jan 2007 03:43:45 +0000 (19:43 -0800)]
cxgb3 - FW versioning

Clean up FW version checking.
The supported FW version is now 3.1.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agogit-netdev-all: chelsio fix
Andrew Morton [Tue, 30 Jan 2007 08:33:04 +0000 (00:33 -0800)]
git-netdev-all: chelsio fix

Cc: "Sunil Naidu" <akula2.shark@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoremove one remaining "#define BCM_TSO 1"
Adrian Bunk [Sat, 27 Jan 2007 08:00:03 +0000 (00:00 -0800)]
remove one remaining "#define BCM_TSO 1"

Since it's no longer used, this "#define BCM_TSO 1" can now be removed.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoUCC Ether driver: kmalloc casting cleanups
Ahmed S. Darwish [Sat, 27 Jan 2007 08:00:02 +0000 (00:00 -0800)]
UCC Ether driver: kmalloc casting cleanups

A kmalloc casting cleanup patch.

Signed-off-by: Ahmed Darwish <darwish.07@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agosky2: handle network device allocation failure
shemminger@linux-foundation.org [Fri, 26 Jan 2007 19:38:36 +0000 (11:38 -0800)]
sky2: handle network device allocation failure

If alloc_etherdev() failed, then sky2_init_netdev will return NULL,
and sky2_probe would end up returning 0 instead of -ENOMEM.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agosky2: software rx/tx stats
shemminger@linux-foundation.org [Fri, 26 Jan 2007 19:38:39 +0000 (11:38 -0800)]
sky2: software rx/tx stats

Maintain packet statistics in software rather than hardware.
This is slightly slower, but allows easier debugging of problems
where packets are still being received by PHY but not being handled
by hardware.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agosky2: version 1.11.1
shemminger@linux-foundation.org [Fri, 26 Jan 2007 19:38:40 +0000 (11:38 -0800)]
sky2: version 1.11.1

Version update to 1.11.1.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoPEGASUS: Fix typo in Corega products.
YOSHIFUJI Hideaki / 吉藤英明 [Fri, 26 Jan 2007 13:59:01 +0000 (22:59 +0900)]
PEGASUS: Fix typo in Corega products.

s/FEter/FEther/.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoASIX: Add IO-DATA ETG-US2 Support.
YOSHIFUJI Hideaki / 吉藤英明 [Fri, 26 Jan 2007 13:57:38 +0000 (22:57 +0900)]
ASIX: Add IO-DATA ETG-US2 Support.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: statistics optimization
Ayaz Abdulla [Tue, 23 Jan 2007 17:27:21 +0000 (12:27 -0500)]
forcedeth: statistics optimization

This patch optimizes the data paths that can support hw counters. It
removes the sw counted statistics.

This is the last patch for the optimization set. Bumping up version of
driver.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: statistics supported
Ayaz Abdulla [Tue, 23 Jan 2007 17:27:00 +0000 (12:27 -0500)]
forcedeth: statistics supported

This patch introduces hw statistics for older devices that supported it.
It breaks up the counters supported into separate versions.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: tx max work
Ayaz Abdulla [Tue, 23 Jan 2007 17:00:56 +0000 (12:00 -0500)]
forcedeth: tx max work

This patch adds a limit to how much tx work can be done in each
iteration of tx processing. If the max limit is reached, remaining tx
completions will be handled by timer interrupt.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: irq data path optimization
Ayaz Abdulla [Sun, 21 Jan 2007 23:10:57 +0000 (18:10 -0500)]
forcedeth: irq data path optimization

This patch optimizes the irq data paths and cleans up the code.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: rx data path optimization
Ayaz Abdulla [Sun, 21 Jan 2007 23:10:52 +0000 (18:10 -0500)]
forcedeth: rx data path optimization

This patch optimizes the rx data paths and cleans up the code.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: tx data path optimization
Ayaz Abdulla [Sun, 21 Jan 2007 23:10:47 +0000 (18:10 -0500)]
forcedeth: tx data path optimization

This patch optimizes the tx data paths and cleans up the code (removes
vlan from descr1/2 since only valid for desc3, changes to make code
easier to read, etc).

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: tx limiting
Ayaz Abdulla [Sun, 21 Jan 2007 23:10:42 +0000 (18:10 -0500)]
forcedeth: tx limiting

This patch optimizes the logic for tx limiting. It adds a flag to check
on the completion side instead of recalculating the number of empty
slots. Also, it removes the fields that were previous used for limiting
since they have no value.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: optimized routines
Ayaz Abdulla [Sun, 21 Jan 2007 23:10:37 +0000 (18:10 -0500)]
forcedeth: optimized routines

This patch breaks up the routines into two versions, one for legacy
descriptor versions (ver 1 and ver 2) and one for desc ver 3. This will
make the new desc functions more leaner and further reductions will be
made in next few patches.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agobonding: update version
Jay Vosburgh [Sat, 20 Jan 2007 02:15:56 +0000 (18:15 -0800)]
bonding: update version

Update version number to reflect recent changes.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agobonding: modify sysfs support to permit multiple loads
Jay Vosburgh [Sat, 20 Jan 2007 02:15:47 +0000 (18:15 -0800)]
bonding: modify sysfs support to permit multiple loads

The existing code would blindly attempt to create the
bonding_masters file (in /sys/class/net) every time the module was
loaded.  When the module is loaded multiple times (which is the
historical method used by initscripts and sysconfig to create multiple
bonding interfaces), this caused load failure of the second module load
attempt, as the creation request would fail.

This changes the code to note the failure, arrange to not remove
the bonding_masters file upon module exit, and then return success.

Bonding interfaces created by the second or subsequent loads of
the module will not exist in bonding_masters.  This is not a significant
change, as previously only the interfaces from the most recent load of
the module would be listed.  Both situations are less than optimal, but
this case permits compatibility with existing distro configuration
scripts, and is consistent.

Note that previously, the sysfs create request would overwrite
the exsting bonding_masters file and succeed, allowing multiple loads of
the module.  The sysfs code has recently changed to return an error if
the file being created already exists.

Patrick McHardy <kaber@trash.net>, who reported this problem,
observed crashes on the old kernel (before sysfs checked for
duplicates).  I did not experience such crashes, but this change should
resolve them.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agobonding: fix error check in sysfs creation
Jay Vosburgh [Sat, 20 Jan 2007 02:15:38 +0000 (18:15 -0800)]
bonding: fix error check in sysfs creation

The existing code did not correctly handle failures to create
the per-interface sysfs group for bonding.

Modified code to notice errors, and correctly unwind.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agobonding: fix device name allocation error
Jay Vosburgh [Sat, 20 Jan 2007 02:15:31 +0000 (18:15 -0800)]
bonding: fix device name allocation error

The code to select names for the bonding interfaces was, for the
non-sysfs creation case, always using a hard-coded set of bond0, bond1,
etc, up to max_bonds.  This caused conflicts for the second or
subsequent loads of the module.

Changed the code to obtain device names from dev_alloc_name().

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agonet: use bitrev8
Akinobu Mita [Tue, 19 Dec 2006 21:09:08 +0000 (13:09 -0800)]
net: use bitrev8

Use bitrev8 for bmac, mace, macmace, macsonic, and skfp drivers.

[akpm@osdl.org: use the API, not the array]
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mirko Lindner <mlindner@syskonnect.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agobonding.h: "extern inline" -> "static inline"
Adrian Bunk [Tue, 12 Dec 2006 16:24:39 +0000 (17:24 +0100)]
bonding.h: "extern inline" -> "static inline"

"extern inline" generates a warning with -Wmissing-prototypes and I'm
currently working on getting the kernel cleaned up for adding this to
the CFLAGS since it will help us to avoid a nasty class of runtime
errors.

If there are places that really need a forced inline, __always_inline
would be the correct solution.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoqla3xxx: Add support for Qlogic 4032 chip.
Ron Mercer [Thu, 4 Jan 2007 00:26:08 +0000 (16:26 -0800)]
qla3xxx: Add support for Qlogic 4032 chip.

Qlogic 4032 chip is an incremental change from the 4022.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoremove the broken OAKNET driver
Adrian Bunk [Thu, 4 Jan 2007 18:53:30 +0000 (19:53 +0100)]
remove the broken OAKNET driver

The OAKNET driver:
- has been marked as BROKEN for more than two years and
- is still marked as BROKEN.

Drivers that had been marked as BROKEN for such a long time seem to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive this driver, the code is still
present in the older kernel releases.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agochelsio: more rx speedup
Stephen Hemminger [Mon, 8 Jan 2007 19:26:12 +0000 (11:26 -0800)]
chelsio: more rx speedup

Cleanup receive processing some more:
   * do the reserve padding of skb during setup
   * don't pass constants to get_packet
   * do smart prefetch of skb
   * make copybreak a module parameter

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agochelsio: NAPI speed improvement
Stephen Hemminger [Mon, 8 Jan 2007 19:26:30 +0000 (11:26 -0800)]
chelsio: NAPI speed improvement

Speedup and cleanup the receive processing by eliminating the
mmio read and a lock round trip.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoAdd support for the latest 1G/10G Chelsio adapter, T3.
Divy Le Ray [Fri, 19 Jan 2007 03:04:14 +0000 (22:04 -0500)]
Add support for the latest 1G/10G Chelsio adapter, T3.

This driver is required by the Chelsio T3 RDMA driver posted by
Steve Wise.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agomake hdlc_setup() static again
Adrian Bunk [Thu, 11 Jan 2007 13:48:59 +0000 (14:48 +0100)]
make hdlc_setup() static again

hdlc_setup was exported, but this export was never used.

If a driver using it actually shows up it can still be exported again.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: rx skb recycle
Ayaz Abdulla [Tue, 9 Jan 2007 18:30:13 +0000 (13:30 -0500)]
forcedeth: rx skb recycle

This patch removes the code that recycled the skb on error. This will
help in reducing the branches in the main data paths.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: tx locking
Ayaz Abdulla [Tue, 9 Jan 2007 18:30:10 +0000 (13:30 -0500)]
forcedeth: tx locking

This patch reduces the amount of code within the lock to only the
critical sections.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: ring access
Ayaz Abdulla [Tue, 9 Jan 2007 18:30:07 +0000 (13:30 -0500)]
forcedeth: ring access

This patch modifys ring access by using pointers. This avoids computing
the current index and avoids accessing the base address of the rings.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: dma access
Ayaz Abdulla [Tue, 9 Jan 2007 18:30:02 +0000 (13:30 -0500)]
forcedeth: dma access

This patch allows the hardware to fetch the tx and rx ring descriptors
with 64 bytes per access instead of 32 bytes.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoremove the broken SKMC driver
Adrian Bunk [Tue, 19 Dec 2006 21:08:48 +0000 (13:08 -0800)]
remove the broken SKMC driver

The SKMC driver has:
- already been marked as BROKEN in 2.6.0 three years ago and
- is still marked as BROKEN.

Drivers that had been marked as BROKEN for such a long time seem to be
unlikely to be revived in the forseeable future.

But if anyone wants to ever revive this driver, the code is still
present in the older kernel releases.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agodriver for Silan SC92031 netdev
Cesar Eduardo Barros [Tue, 19 Dec 2006 21:08:47 +0000 (13:08 -0800)]
driver for Silan SC92031 netdev

This is a driver for the Silan SC92031/Rsltek 8139D NIC chip.

This chip is found on at least one counterfeit Encore ENL832-TX-RENT NIC
[1], which came with a mini-CD with the 2.4 driver.  A slightly older
version of the driver was found at [2].  The main difference between them
is that the newer one has a small bugfix in the RX path, a lot of
gratuitous renaming of functions, all the printable strings changed to show
as a "Rsltek 8139D" [sic], and a PCI ID of 8139 instead of 2031.  The
driver on this patch is a rewrite of the vendor drivers (based mostly on
the older one).

Changes from the previous patch sent to netdev:
- Use MMIO instead of PIO
- Changed TX bounce buffers allocation
- Use skb_copy_and_csum_dev
- Several small bug fixes
- Tested for more than just a few minutes each time

[1] See http://www.encore-usa.com/faq.php under ENL832-TX-RENT for more
    information
[2] Look for SL_LINUX.ZIP (which is really a .tar.gz) at
    http://broadbandforum.in/dataone_Intex_LAN_cardlinux-t4207-s15.html
[3] To compile on 2.6.17, simply add back the last argument to the
    interrupt handler in two places, and copy the boolean declarations
    from 2.6.19

[akpm@osdl.org: build fixes]
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agosky2: better power state management
Stephen Hemminger [Wed, 20 Dec 2006 21:06:36 +0000 (13:06 -0800)]
sky2: better power state management

Improve power management and error handling by using pci_set_power_state(),
instead of driver doing PCI PM register changes in the driver.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoremove NETIF_F_TSO ifdefery
Arjan van de Ven [Tue, 12 Dec 2006 13:06:23 +0000 (14:06 +0100)]
remove NETIF_F_TSO ifdefery

Remove the NETIF_F_TSO #ifdef-ery in drivers/net; this was
for old-old-2.4 compat (even current 2.4 has NETIF_F_TSO)
but it's time to get rid of it by now.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet RX Debugging printout
Linas Vepstas [Wed, 13 Dec 2006 21:23:56 +0000 (15:23 -0600)]
Spidernet RX Debugging printout

Add some debugging and error printing.

The show_rx_chain() prints out the status of the rx chain,
which shows that the status of the descriptors gets
messed up after the second & subsequent RX ramfulls.

Print out contents of bad packets if error occurs.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet Avoid possible RX chain corruption
Linas Vepstas [Wed, 13 Dec 2006 21:23:01 +0000 (15:23 -0600)]
Spidernet Avoid possible RX chain corruption

Delete possible source of chain corruption; the hardware
already knows the location of the tail, and writing it
again is likely to mess it up.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet Memory barrier
Linas Vepstas [Wed, 13 Dec 2006 21:22:04 +0000 (15:22 -0600)]
Spidernet Memory barrier

Add memory barrier to make sure that the rest of the
RX descriptor state is flushed to memory before we tell
the hardware that its ready to go.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet RX Chain tail
Linas Vepstas [Wed, 13 Dec 2006 21:20:59 +0000 (15:20 -0600)]
Spidernet RX Chain tail

Tell the hardware the location of the rx ring tail.
More punctuation cleanup.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet Remove unused variable
Linas Vepstas [Wed, 13 Dec 2006 21:19:54 +0000 (15:19 -0600)]
Spidernet Remove unused variable

Remove unused variable; this makes code easier to read.
Tweak commentary.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet RX Refill
Linas Vepstas [Wed, 13 Dec 2006 21:18:52 +0000 (15:18 -0600)]
Spidernet RX Refill

The invocation of the rx ring refill routine is haphazard,
it can be called from a central location.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet Cleanup return codes
Linas Vepstas [Wed, 13 Dec 2006 21:17:39 +0000 (15:17 -0600)]
Spidernet Cleanup return codes

Simplify the somewhat convoluted use of return codes
in the rx buffer handling.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet another skb mem leak
Linas Vepstas [Wed, 13 Dec 2006 21:16:18 +0000 (15:16 -0600)]
Spidernet another skb mem leak

Another skb leak in an error branch. Fix this by adding
call to dev_kfree_skb_irq() after moving to a more
appropriate spot.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet RX skb mem leak
Linas Vepstas [Wed, 13 Dec 2006 21:15:15 +0000 (15:15 -0600)]
Spidernet RX skb mem leak

One of the unlikely error branches has an skb memory leak.
Fix this by handling the error conditions consistently.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet cleanup un-needed API
Linas Vepstas [Wed, 13 Dec 2006 21:12:26 +0000 (15:12 -0600)]
Spidernet cleanup un-needed API

There is no need to pass a flag into spider_net_decode_one_descr()
so remove this, and perform some othre minor cleanup.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet remove rxramfull tasklet
Linas Vepstas [Wed, 13 Dec 2006 21:10:06 +0000 (15:10 -0600)]
Spidernet remove rxramfull tasklet

Get rid of the rxramfull tasklet, and let the NAPI poll routine
deal with this situation. (The rxramfull interrupt is simply
stating that the h/w has run out of room for incoming packets).

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet add net_ratelimit to suppress long output
Linas Vepstas [Wed, 13 Dec 2006 21:08:25 +0000 (15:08 -0600)]
Spidernet add net_ratelimit to suppress long output

This patch adds net_ratelimit to many of the printks in order to
limit extraneous warning messages (created in response to Bug 28554).
This patch supercedes all previous ratelimit patches.
This has been tested, please apply.

From: James K Lewis <jklewis@us.ibm.com>
Signed-off-by: James K Lewis <jklewis@us.ibm.com>
Signed-off-by: Linas Vepstas <jlinas@austin.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoSpidernet DMA coalescing
Linas Vepstas [Wed, 13 Dec 2006 21:06:59 +0000 (15:06 -0600)]
Spidernet DMA coalescing

The current driver code performs 512 DMA mappings of a bunch of
32-byte ring descriptor structures. This is silly, as they are
all in contiguous memory. This patch changes the code to
dma_map_coherent() each rx/tx ring as a whole.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agochelsio: tabulate the update of the statistic counters
Francois Romieu [Mon, 11 Dec 2006 23:13:48 +0000 (00:13 +0100)]
chelsio: tabulate the update of the statistic counters

Let's try to avoid some code duplication.

- cxgb2
  The data are contiguous. Use plain memcpy.

- ixf1010/pm3393/vsc7326
  The cast of &mac->stats to (u64 *) is not wonderful but it is not clear
  if it is worth to add an ad-hoc union under the struct cmac_statistics.

vsc7326_reg.h suggests that more statistics could be available.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
17 years agochelsio: misc cleanups in sge
Francois Romieu [Tue, 5 Dec 2006 22:57:41 +0000 (23:57 +0100)]
chelsio: misc cleanups in sge

- duplicated code in sge::free_cmdQ_buffers ;
- NET_IP_ALIGN is already defined in (included) <linux/skbuff.h> ;
- pci_alloc_consistent() returns void * ;
- pci_alloc_consistent() returns a zeroed chunk of memory ;
- early return in restart_tx_queues.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
17 years agochelsio: useless test in cxgb2::remove_one
Francois Romieu [Tue, 5 Dec 2006 22:19:06 +0000 (23:19 +0100)]
chelsio: useless test in cxgb2::remove_one

pci_get_drvadata() is necessarily distinct from NULL if
cxgb2::init_one succeeded. cxgb2::remove_one is solely
issued through the PCI device callback.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
17 years agochelsio: useless curly braces
Francois Romieu [Mon, 11 Dec 2006 22:49:13 +0000 (23:49 +0100)]
chelsio: useless curly braces

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
17 years agochelsio: spaces, tabs and friends
Francois Romieu [Mon, 11 Dec 2006 22:47:00 +0000 (23:47 +0100)]
chelsio: spaces, tabs and friends

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
17 years agochelsio: the return statement is not a function
Francois Romieu [Mon, 11 Dec 2006 22:41:36 +0000 (23:41 +0100)]
chelsio: the return statement is not a function

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
17 years agochelsio: move return, break and continue statements on their own line
Francois Romieu [Tue, 5 Dec 2006 21:38:00 +0000 (22:38 +0100)]
chelsio: move return, break and continue statements on their own line

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
17 years ago[PATCH] ipw2200: add iwconfig rts/frag auto support
Zhu Yi [Thu, 11 Jan 2007 09:32:54 +0000 (17:32 +0800)]
[PATCH] ipw2200: add iwconfig rts/frag auto support

This patch add ipw2200 support for iwconfig rts/frag auto.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] zd1211rw: Add ID for ZyXEL ZyAIR G-220 v2
Daniel Drake [Thu, 4 Jan 2007 03:33:54 +0000 (03:33 +0000)]
[PATCH] zd1211rw: Add ID for ZyXEL ZyAIR G-220 v2

Tested by Marijn Schouten
zd1211b chip 0586:340f v4810 high 00-13-49 AL2230_RF pa0 g---
FCC ID: I88G220V2

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] softmac: avoid assert in ieee80211softmac_wx_get_rate
John W. Linville [Wed, 3 Jan 2007 02:22:05 +0000 (21:22 -0500)]
[PATCH] softmac: avoid assert in ieee80211softmac_wx_get_rate

Unconfigured bcm43xx device can hit an assert() during wx_get_rate
queries.  This is because bcm43xx calls ieee80211softmac_start late
(i.e. during open instead of probe).

   bcm43xx_net_open ->
      bcm43xx_init_board ->
         bcm43xx_select_wireless_core ->
            ieee80211softmac_start

Fix is to check that device is running before completing
ieee80211softmac_wx_get_rate.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] prism54: add ethtool -i interface
Kai Engert [Tue, 12 Dec 2006 20:09:41 +0000 (21:09 +0100)]
[PATCH] prism54: add ethtool -i interface

Add support for "ethtool -i" to prism54 driver.

ethtool -i queries the specified device for
associated driver information.

This helps tools like Fedora's system-config-network to
provide GUI management of network devices.
I learned how to write this patch by reading the ipw2100
driver code.

Signed-off-by: Kai Engert <kengert@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] bcm43xx: Interrogate hardware-enable switch and update LEDs
Larry Finger [Sun, 31 Dec 2006 05:30:32 +0000 (23:30 -0600)]
[PATCH] bcm43xx: Interrogate hardware-enable switch and update LEDs

The current bcm43xx driver ignores any wireless-enable switches on mini-PCI
and mini-PCI-E cards. This patch implements a new routine to interrogate the
radio hardware enabled bit in the interface, logs the initial state and any
changes in the switch (if debugging enabled), activates the LED to show the
state, and changes the periodic work handler to provide 1 second response
to switch changes and to account for changes in the periodic work specs.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] zd1211rw: Add ID for Linksys WUSBF54G
Daniel Drake [Sat, 30 Dec 2006 22:38:23 +0000 (22:38 +0000)]
[PATCH] zd1211rw: Add ID for Linksys WUSBF54G

Tested by Henrik Hjelte
zd1211b chip 13b1:0024 v4802 high 00-14-bf AL2230_RF pa0 ----

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] Update Prism54 MAINTAINERS entry
Michael Buesch [Fri, 15 Dec 2006 20:32:44 +0000 (21:32 +0100)]
[PATCH] Update Prism54 MAINTAINERS entry

prism54-private@prism54.org bounces with

    SMTP error from remote mailer after RCPT TO:<prism54-private@prism54.org>:
    host mx1.tuxfamily.net [212.85.158.8]: 550 unknown user

developers@islsm.org seems to be the new mailing list.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
17 years ago[PATCH] zd1211rw: Remove addressing abstraction
Daniel Drake [Tue, 12 Dec 2006 01:26:11 +0000 (01:26 +0000)]
[PATCH] zd1211rw: Remove addressing abstraction

Instead of passing our own custom 32-bit addresses around and
translating them, this patch makes all our register address constants
absolute and removes the translation.

There are two ugly parts:
 - fw_reg_addr() is needed to compute addresses of firmware registers, as this
   is dynamic based upon firmware
 - inc_addr() needs a small hack to handle byte vs word addressing

However, both of those are only small, and we don't use fw_regs a whole
lot anyway.

The bonuses here include simplicity and improved driver readability. Also, the
fact that registers are now referenced by 16-bit absolute addresses (as
opposed to 32-bit pseudo addresses) means that over 2kb compiled code size has
been shaved off.

Includes some touchups and sparse fixes from Ulrich Kunitz.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>