]> pilppa.com Git - linux-2.6-omap-h63xx.git/log
linux-2.6-omap-h63xx.git
15 years agotracing: rename ftrace_printk() => trace_printk()
Ingo Molnar [Thu, 5 Mar 2009 09:24:48 +0000 (10:24 +0100)]
tracing: rename ftrace_printk() => trace_printk()

Impact: cleanup

Use a more generic name - this also allows the prototype to move
to kernel.h and be generally available to kernel developers who
want to do some quick tracing.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoMerge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Thu, 5 Mar 2009 09:21:49 +0000 (10:21 +0100)]
Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace

15 years agoMerge branch 'tracing/ftrace' into tracing/core
Ingo Molnar [Thu, 5 Mar 2009 09:20:47 +0000 (10:20 +0100)]
Merge branch 'tracing/ftrace' into tracing/core

15 years agotracing: have latency tracers set the latency format
Steven Rostedt [Thu, 5 Mar 2009 03:15:30 +0000 (22:15 -0500)]
tracing: have latency tracers set the latency format

The latency tracers (irqsoff, preemptoff, preemptirqsoff, and wakeup)
are pretty useless with the default output format. This patch makes them
automatically enable the latency format when they are selected. They
also record the state of the latency option, and if it was not enabled
when selected, they disable it on reset.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: consolidate print_lat_fmt and print_trace_fmt
Steven Rostedt [Thu, 5 Mar 2009 02:57:29 +0000 (21:57 -0500)]
tracing: consolidate print_lat_fmt and print_trace_fmt

Impact: clean up

Both print_lat_fmt and print_trace_fmt do pretty much the same thing
except for one different function call. This patch consolidates the
two functions and adds an if statement to perform the difference.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: remove extra latency_trace method from trace structure
Steven Rostedt [Thu, 5 Mar 2009 02:42:04 +0000 (21:42 -0500)]
tracing: remove extra latency_trace method from trace structure

Impact: clean up

The trace and latency_trace function pointers are identical for
every tracer but the function tracer. The differences in the function
tracer are trivial (latency output puts paranthesis around parent).

This patch removes the latency_trace pointer and all prints will
now just use the trace output function pointer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: add latency output format option
Steven Rostedt [Thu, 5 Mar 2009 01:34:24 +0000 (20:34 -0500)]
tracing: add latency output format option

With the removal of the latency_trace file, we lost the ability
to see some of the finer details in a trace. Like the state of
interrupts enabled, the preempt count, need resched, and if we
are in an interrupt handler, softirq handler or not.

This patch simply creates an option to bring back the old format.
This also removes the warning about an unused variable that held
the latency_trace file operations.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: fix seq read from trace files
Steven Rostedt [Thu, 5 Mar 2009 01:31:11 +0000 (20:31 -0500)]
tracing: fix seq read from trace files

The buffer used by trace_seq was updated incorrectly. Instead
of consuming what was actually read, it consumed the rest of the
buffer on reads.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: do not return EFAULT if read copied anything
Steven Rostedt [Thu, 5 Mar 2009 00:10:05 +0000 (19:10 -0500)]
tracing: do not return EFAULT if read copied anything

Impact: fix trace read to conform to standards

Andrew Morton, Theodore Tso and H. Peter Anvin brought to my attention
that a userspace read should not return -EFAULT if it succeeded in
copying anything. It should only return -EFAULT if it failed to copy
at all.

This patch modifies the check of copy_from_user and updates the return
code appropriately.

I also used H. Peter Anvin's short cut rule to just test ret == count.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agoring-buffer: fix timestamp in partial ring_buffer_page_read
Steven Rostedt [Wed, 4 Mar 2009 04:52:42 +0000 (23:52 -0500)]
ring-buffer: fix timestamp in partial ring_buffer_page_read

If a partial ring_buffer_page_read happens, then some of the
incremental timestamps may be lost. This patch writes the
recent timestamp into the page that is passed back to the caller.

A partial ring_buffer_page_read is where the full page would not
be written back to the user, and instead, just part of the page
is copied to the user. A full page would be a page swap with the
ring buffer and the timestamps would be correct.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: add cpu_file intialization for ftrace_dump
Steven Rostedt [Wed, 4 Mar 2009 23:20:36 +0000 (18:20 -0500)]
tracing: add cpu_file intialization for ftrace_dump

Impact: fix to ftrace_dump output corruption

The commit: b04cc6b1f6398b0e0b60d37e27ce51b4899672ec
  tracing/core: introduce per cpu tracing files

added a new field to the iterator called cpu_file. This was a handle
to differentiate between the per cpu trace output files and the
all cpu "trace" file. The all cpu "trace" file required setting this
to TRACE_PIPE_ALL_CPU.

The problem is that the ftrace_dump sets up its own iterator but was
not updated to handle this change. The result was only CPU 0 printing
out on crash and a lot of "<0>"'s also being printed.

Reported-by: Thomas Gleixner <tglx@linuxtronix.de>
Tested-by: Darren Hart <dvhtc@us.ibm.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: add lockdep tracepoints for lock acquire/release
Peter Zijlstra [Wed, 4 Mar 2009 11:32:55 +0000 (12:32 +0100)]
tracing: add lockdep tracepoints for lock acquire/release

Augment the traces with lock names when lockdep is available:

 1)               |  down_read_trylock() {
 1)               |    _spin_lock_irqsave() {
 1)               |      /* lock_acquire: &sem->wait_lock */
 1)   4.201 us    |    }
 1)               |    _spin_unlock_irqrestore() {
 1)               |      /* lock_release: &sem->wait_lock */
 1)   3.523 us    |    }
 1)               |  /* lock_acquire: try read &mm->mmap_sem */
 1) + 13.386 us   |  }
 1)   1.635 us    |  find_vma();
 1)               |  handle_mm_fault() {
 1)               |    __do_fault() {
 1)               |      filemap_fault() {
 1)               |        find_lock_page() {
 1)               |          find_get_page() {
 1)               |            /* lock_acquire: read rcu_read_lock */
 1)               |            /* lock_release: rcu_read_lock */
 1)   5.697 us    |          }
 1)   8.158 us    |        }
 1) + 11.079 us   |      }
 1)               |      _spin_lock() {
 1)               |        /* lock_acquire: __pte_lockptr(page) */
 1)   3.949 us    |      }
 1)   1.460 us    |      page_add_file_rmap();
 1)               |      _spin_unlock() {
 1)               |        /* lock_release: __pte_lockptr(page) */
 1)   3.115 us    |      }
 1)               |      unlock_page() {
 1)   1.421 us    |        page_waitqueue();
 1)   1.220 us    |        __wake_up_bit();
 1)   6.519 us    |      }
 1) + 34.328 us   |    }
 1) + 37.452 us   |  }
 1)               |  up_read() {
 1)               |  /* lock_release: &mm->mmap_sem */
 1)               |    _spin_lock_irqsave() {
 1)               |      /* lock_acquire: &sem->wait_lock */
 1)   3.865 us    |    }
 1)               |    _spin_unlock_irqrestore() {
 1)               |      /* lock_release: &sem->wait_lock */
 1)   8.562 us    |    }
 1) + 17.370 us   |  }

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: =?ISO-8859-1?Q?T=F6r=F6k?= Edwin <edwintorok@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1236166375.5330.7209.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoMerge branch 'core/locking' into tracing/ftrace
Ingo Molnar [Wed, 4 Mar 2009 17:49:19 +0000 (18:49 +0100)]
Merge branch 'core/locking' into tracing/ftrace

15 years agolockdep: require framepointers for x86
Peter Zijlstra [Wed, 4 Mar 2009 11:27:27 +0000 (12:27 +0100)]
lockdep: require framepointers for x86

Require framepointers for x86, because otherwise we'll be having
empty stack traces, which is useless.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1236167295.5330.7240.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agolockdep: remove extra "irq" string
Peter Zijlstra [Wed, 4 Mar 2009 13:53:24 +0000 (14:53 +0100)]
lockdep: remove extra "irq" string

Impact: clarify lockdep printk text

print_irq_inversion_bug() gets handed state strings of the form

  "HARDIRQ", "SOFTIRQ", "RECLAIM_FS"

and appends "-irq-{un,}safe" to them, which is either redudant for *IRQ or
confusing in the RECLAIM_FS case.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1236175192.5330.7585.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agolockdep: fix incorrect state name
Peter Zijlstra [Wed, 4 Mar 2009 12:51:13 +0000 (13:51 +0100)]
lockdep: fix incorrect state name

In the recent mark_lock_irq() rework a bug snuck in that would report the
state of write locks causing irq inversion under a read lock as a read
lock.

Fix this by masking the read bit of the state when validating write
dependencies.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1236172646.5330.7450.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoMerge branch 'rfc/splice/tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux...
Ingo Molnar [Wed, 4 Mar 2009 10:15:42 +0000 (11:15 +0100)]
Merge branch 'rfc/splice/tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace

15 years agoMerge branch 'tracing/ftrace'; commit 'v2.6.29-rc7' into tracing/core
Ingo Molnar [Wed, 4 Mar 2009 10:14:47 +0000 (11:14 +0100)]
Merge branch 'tracing/ftrace'; commit 'v2.6.29-rc7' into tracing/core

15 years agotracing: add binary buffer files for use with splice
Steven Rostedt [Tue, 2 Dec 2008 03:20:19 +0000 (22:20 -0500)]
tracing: add binary buffer files for use with splice

Impact: new feature

This patch creates a directory of files that correspond to the
per CPU ring buffers. These are binary files and are made to
be used with splice. This is the fastest way to extract data from
the ftrace ring buffers.

Thanks to Jiaying Zhang for pushing me to get this code fixed,
 and to Eduard - Gabriel Munteanu for his splice code that helped
 me debug my code.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agoring-buffer: make ring_buffer_read_page read from start on partial page
Steven Rostedt [Wed, 4 Mar 2009 00:51:40 +0000 (19:51 -0500)]
ring-buffer: make ring_buffer_read_page read from start on partial page

Impact: dont leave holes in read buffer page

The ring_buffer_read_page swaps a given page with the reader page
of the ring buffer, if certain conditions are set:

 1) requested length is big enough to hold entire page data

 2) a writer is not currently on the page

 3) the page is not partially consumed.

Instead of swapping with the supplied page. It copies the data to
the supplied page instead. But currently the data is copied in the
same offset as the source page. This causes a hole at the start
of the reader page. This complicates the use of this function.
Instead, it should copy the data at the beginning of the function
and update the index fields accordingly.

Other small clean ups are also done in this patch.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agoring-buffer: replace sizeof of event header with offsetof
Steven Rostedt [Tue, 3 Mar 2009 18:53:07 +0000 (13:53 -0500)]
ring-buffer: replace sizeof of event header with offsetof

Impact: fix to possible alignment problems on some archs.

Some arch compilers include an NULL char array in the sizeof field.
Since the ring_buffer_event type includes one of these, it is better
to use the "offsetof" instead, to avoid strange bugs on these archs.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agoring-buffer: fix ring_buffer_read_page
Steven Rostedt [Tue, 3 Mar 2009 05:27:49 +0000 (00:27 -0500)]
ring-buffer: fix ring_buffer_read_page

The ring_buffer_read_page was broken if it were to only copy part
of the page. This patch fixes that up as well as adds a parameter
to allow a length field, in order to only copy part of the buffer page.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agoring-buffer: reset write field for ring_buffer_read_page
Steven Rostedt [Tue, 3 Mar 2009 01:56:48 +0000 (20:56 -0500)]
ring-buffer: reset write field for ring_buffer_read_page

Impact: fix ring_buffer_read_page

After a page is swapped into the ring buffer, the write field must
also be reset.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agoLinux 2.6.29-rc7
Linus Torvalds [Wed, 4 Mar 2009 01:05:22 +0000 (17:05 -0800)]
Linux 2.6.29-rc7

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Wed, 4 Mar 2009 01:05:08 +0000 (17:05 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ixp4xx - Fix qmgr_request_queue build failure
  crypto: api - Fix module load deadlock with fallback algorithms

15 years agocrypto: ixp4xx - Fix qmgr_request_queue build failure
Krzysztof Hałasa [Wed, 4 Mar 2009 00:01:22 +0000 (08:01 +0800)]
crypto: ixp4xx - Fix qmgr_request_queue build failure

There is another user of IXP4xx queue manager, fix it.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
15 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 3 Mar 2009 22:33:20 +0000 (14:33 -0800)]
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: don't allow setuid to succeed if the user does not have rt bandwidth
  sched_rt: don't start timer when rt bandwidth disabled

15 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 3 Mar 2009 22:32:55 +0000 (14:32 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: oprofile: don't set counter width from cpuid on Core2
  x86: fix init_memory_mapping() to handle small ranges

15 years agoMerge branch 'tracing/mmiotrace' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 3 Mar 2009 22:32:37 +0000 (14:32 -0800)]
Merge branch 'tracing/mmiotrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing/mmiotrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86 mmiotrace: fix race with release_kmmio_fault_page()
  x86 mmiotrace: improve handling of secondary faults
  x86 mmiotrace: split set_page_presence()
  x86 mmiotrace: fix save/restore page table state
  x86 mmiotrace: WARN_ONCE if dis/arming a page fails
  x86: add far read test to testmmiotrace
  x86: count errors in testmmiotrace.ko

15 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 3 Mar 2009 22:32:04 +0000 (14:32 -0800)]
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: Teach RCU that idle task is not quiscent state at boot

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 3 Mar 2009 22:12:41 +0000 (14:12 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] fix lots of ARM __devexit sillyness
  [ARM] 5417/1: Set the correct cacheid for ARMv6 CPUs with ARMv7 style MMU
  [ARM] 5416/1: Use unused address in v6_early_abort
  [ARM] 5411/1: S3C64XX: Fix EINT unmask
  [ARM] at91: fix for Atmel AT91 powersaving
  [ARM] RiscPC: Fix etherh oops

15 years ago[ARM] fix lots of ARM __devexit sillyness
Russell King [Tue, 3 Mar 2009 13:43:47 +0000 (13:43 +0000)]
[ARM] fix lots of ARM __devexit sillyness

`iop_adma_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`mv_xor_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`mv64xxx_i2c_unmap_regs' referenced in section `.devinit.text' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`mv64xxx_i2c_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`orion_nand_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`pxafb_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
15 years agoMerge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Tue, 3 Mar 2009 15:02:16 +0000 (16:02 +0100)]
Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace

15 years agotracing: fix return value to registering events
Steven Rostedt [Tue, 3 Mar 2009 14:43:50 +0000 (09:43 -0500)]
tracing: fix return value to registering events

The registering of events had the return value check backwards.
A zero returned is success, the check had it as a failure.

This patch also fixes a missing "\n" in the warning that the check
failed.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years ago[ARM] 5417/1: Set the correct cacheid for ARMv6 CPUs with ARMv7 style MMU
Catalin Marinas [Tue, 3 Mar 2009 10:44:12 +0000 (11:44 +0100)]
[ARM] 5417/1: Set the correct cacheid for ARMv6 CPUs with ARMv7 style MMU

The cacheid_init() function assumes that if cpu_architecture() returns
7, the caches are VIPT_NONALIASING. The cpu_architecture() function
returns the version of the supported MMU features (e.g. TEX remapping)
but it doesn't make any assumptions about the cache type. The patch adds
the checking of the Cache Type Register for the ARMv7 format.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
15 years ago[ARM] 5416/1: Use unused address in v6_early_abort
Seth Forshee [Mon, 2 Mar 2009 21:39:36 +0000 (22:39 +0100)]
[ARM] 5416/1: Use unused address in v6_early_abort

The target of the strex instruction to clear the exlusive monitor
is currently the top of the stack.  If the store succeeeds this
corrupts r0 in pt_regs.  Use the next stack location instead of
the current one to prevent any chance of corrupting an in-use
address.

Signed-off-by: Seth Forshee <seth.forshee@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
15 years agox86: oprofile: don't set counter width from cpuid on Core2
Tim Blechmann [Thu, 19 Feb 2009 16:34:03 +0000 (17:34 +0100)]
x86: oprofile: don't set counter width from cpuid on Core2

Impact: fix stuck NMIs and non-working oprofile on certain CPUs

Resetting the counter width of the performance counters on Intel's
Core2 CPUs, breaks the delivery of NMIs, when running in x86_64 mode.

This should fix bug #12395:

  http://bugzilla.kernel.org/show_bug.cgi?id=12395

Signed-off-by: Tim Blechmann <tim@klingt.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <20090303100412.GC10085@erda.amd.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agox86: fix init_memory_mapping() to handle small ranges
Yinghai Lu [Tue, 3 Mar 2009 07:36:13 +0000 (23:36 -0800)]
x86: fix init_memory_mapping() to handle small ranges

Impact: fix failed EFI bootup in certain circumstances

Ying Huang found init_memory_mapping() has problem with small ranges
less than 2M when he tried to direct map the EFI runtime code out of
max_low_pfn_mapped.

It turns out we never considered that case and didn't check the range...

Reported-by: Ying Huang <ying.huang@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Maly <bmaly@redhat.com>
LKML-Reference: <49ACDDED.1060508@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoRevert "menu: fix embedded menu snafu"
Linus Torvalds [Tue, 3 Mar 2009 00:23:33 +0000 (16:23 -0800)]
Revert "menu: fix embedded menu snafu"

This reverts commit 155b25bcc28631a5b5230191aa3f56c40dfffa3f, which was
totally wrong - the "embedded" options still exists (very much so) even
on non-embedded platforms.

It's just that we don't bother with actually asking about them when
we're not embedded, we just take their default values (which is usually
'y' - the options add features that may not be worth it in a constrained
environment).

Noticed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Tue, 3 Mar 2009 00:11:36 +0000 (16:11 -0800)]
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Fix use-before-null-check in i915_irq_emit().
  drm: Avoid client deadlocks when the master disappears.
  drm: Wake up all lock waiters when the master disappears.
  drm: Don't return ERESTARTSYS to user-space.

15 years agodrm/i915: Fix use-before-null-check in i915_irq_emit().
Eric Anholt [Wed, 25 Feb 2009 06:14:12 +0000 (22:14 -0800)]
drm/i915: Fix use-before-null-check in i915_irq_emit().

This could be triggered by a client asking to emit an irq when the device
wasn't initialized.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
15 years agodrm: Avoid client deadlocks when the master disappears.
Thomas Hellstrom [Mon, 2 Mar 2009 10:10:56 +0000 (11:10 +0100)]
drm: Avoid client deadlocks when the master disappears.

This is done by
1) Wake up lock waiters when we close the master file descriptor.
   Not when the master structure is removed, since the latter
   requires the waiters themselves to release the refcount on the
   master structure -> Deadlock.
2) Send a SIGTERM to all clients waiting for the lock.
   Normally these clients will get a SIGPIPE when the X server dies,
   but clients may also spin trying to grab the DRM lock, without
   getting any sort of notification.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
15 years agodrm: Wake up all lock waiters when the master disappears.
Thomas Hellstrom [Mon, 2 Mar 2009 10:10:55 +0000 (11:10 +0100)]
drm: Wake up all lock waiters when the master disappears.

Currently only one waiter is woken up, leaving other waiters
hanging waiting for the DRM lock.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
15 years agodrm: Don't return ERESTARTSYS to user-space.
Thomas Hellstrom [Mon, 2 Mar 2009 10:10:54 +0000 (11:10 +0100)]
drm: Don't return ERESTARTSYS to user-space.

That return code is for in-kernel use only.
Use EINTR instead.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
15 years agomenu: fix embedded menu snafu
Randy Dunlap [Mon, 2 Mar 2009 22:14:06 +0000 (14:14 -0800)]
menu: fix embedded menu snafu

The COMPAT_BRK kconfig symbol does not depend on EMBEDDED, but it is in
the midst of the EMBEDDED menu symbols, so it mucks up the EMBEDDED
menu.  Fix by moving it to just after all of the EMBEDDED menu symbols.

Also, surround all of the EMBEDDED symbols with "if EMBEDDED"/"endif" so
that this EMBEDDED block is clearer.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Mon, 2 Mar 2009 23:48:00 +0000 (15:48 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: Add NO_BUSY_IRQ quirk for Marvell CAFE host chip
  sdhci: Add quirk for controllers with no end-of-busy IRQ

15 years agoMerge branch 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 2 Mar 2009 23:47:19 +0000 (15:47 -0800)]
Merge branch 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add probe_mask default for Toshiba laptop with ALC268
  ALSA: hda - Add quirk for new HP xw series
  ALSA: hda - Fix digital mic on dell-m4-1 and dell-m4-3

15 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 2 Mar 2009 23:47:01 +0000 (15:47 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  fix warning in io_mapping_map_wc()
  x86: i915 needs pgprot_writecombine() and is_io_mapping_possible()

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 2 Mar 2009 23:46:09 +0000 (15:46 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
  zaurus: add usb id for motomagx phones
  usbnet: make usbnet_get_link() fall back to ethtool_op_get_link()
  veth: Fix carrier detect
  cdc_ether: add usb id for Ericsson F3507g
  r8169: read MAC address from EEPROM on init (2nd attempt)
  tcp: fix retrans_out leaks
  net headers: export dcbnl.h
  net headers: cleanup dcbnl.h
  netpoll: Add drop checks to all entry points
  gianfar: Do right check on num_txbdfree
  pkt_sched: sch_drr: Fix oops in drr_change_class.
  b44: Disable device on shutdown
  b44: Unconditionally enable interrupt routing on reset
  net: fix hp-plus build error
  libertas: fix misuse of netdev_priv() and dev->ml_priv
  ipv6: don't use tw net when accounting for recycled tw
  asix: new device ids
  tcp_scalable: Update malformed & dead url
  netfilter: xt_recent: fix proc-file addition/removal of IPv4 addresses
  netxen: handle pci bar 0 mapping failure
  ...

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Mon, 2 Mar 2009 23:44:08 +0000 (15:44 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  selinux: Fix a panic in selinux_netlbl_inode_permission()

15 years agoChange email address
Karsten Keil [Sun, 1 Mar 2009 17:04:53 +0000 (18:04 +0100)]
Change email address

Since I will loose the old address soon, please change it.

Signed-off-by: Karsten Keil <kkeil@linux-pingi.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Mon, 2 Mar 2009 23:43:03 +0000 (15:43 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elantech - touchpad driver miss-recognising logitech mice
  Input: synaptics - ensure we reset the device on resume
  Input: usbtouchscreen - fix eGalax HID ignoring
  Input: ambakmi - fix timeout handling in amba_kmi_write()
  Input: pxa930_trkball - fix write timeout handling
  Input: struct device - replace bus_id with dev_name(), dev_set_name()
  Input: bf54x-keys - fix debounce time validation
  Input: spitzkbd - mark probe function as __devinit
  Input: omap-keypad - mark probe function as __devinit
  Input: corgi_ts - mark probe function as __devinit
  Input: corgikbd - mark probe function as __devinit
  Input: uvc - the button on the camera is KEY_CAMERA
  Input: psmouse - make MOUSE_PS2_LIFEBOOK depend on X86
  Input: atkbd - make forced_release_keys[] static
  Input: usbtouchscreen - allow reporting calibrated data

15 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Mon, 2 Mar 2009 23:42:26 +0000 (15:42 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: don't call jbd2_journal_force_commit_nested without journal
  ext4: Reorder fs/Makefile so that ext2 root fs's are mounted using ext2
  ext4: Remove duplicate call to ext4_commit_super() in ext4_freeze()

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Mon, 2 Mar 2009 23:41:59 +0000 (15:41 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] mpt: fix disable lsi sas to use msi as default
  [SCSI] fix ABORTED_COMMAND looping forever problem
  [SCSI] sd: revive sd_index_lock
  [SCSI] cxgb3i: update the driver version to 1.0.1
  [SCSI] cxgb3i: Fix spelling errors in documentation
  [SCSI] cxgb3i: added missing include in cxgb3i_ddp.h
  [SCSI] cxgb3i: Outgoing pdus need to observe skb's MAX_SKB_FRAGS
  [SCSI] cxgb3i: added per-task data to track transmit progress
  [SCSI] cxgb3i: transmit work-request fixes
  [SCSI] hptiop: Add new PCI device ID

15 years agox86-64: seccomp: fix 32/64 syscall hole
Roland McGrath [Sat, 28 Feb 2009 07:25:54 +0000 (23:25 -0800)]
x86-64: seccomp: fix 32/64 syscall hole

On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with
ljmp, and then use the "syscall" instruction to make a 64-bit system
call.  A 64-bit process make a 32-bit system call with int $0x80.

In both these cases under CONFIG_SECCOMP=y, secure_computing() will use
the wrong system call number table.  The fix is simple: test TS_COMPAT
instead of TIF_IA32.  Here is an example exploit:

/* test case for seccomp circumvention on x86-64

   There are two failure modes: compile with -m64 or compile with -m32.

   The -m64 case is the worst one, because it does "chmod 777 ." (could
   be any chmod call).  The -m32 case demonstrates it was able to do
   stat(), which can glean information but not harm anything directly.

   A buggy kernel will let the test do something, print, and exit 1; a
   fixed kernel will make it exit with SIGKILL before it does anything.
*/

#define _GNU_SOURCE
#include <assert.h>
#include <inttypes.h>
#include <stdio.h>
#include <linux/prctl.h>
#include <sys/stat.h>
#include <unistd.h>
#include <asm/unistd.h>

int
main (int argc, char **argv)
{
  char buf[100];
  static const char dot[] = ".";
  long ret;
  unsigned st[24];

  if (prctl (PR_SET_SECCOMP, 1, 0, 0, 0) != 0)
    perror ("prctl(PR_SET_SECCOMP) -- not compiled into kernel?");

#ifdef __x86_64__
  assert ((uintptr_t) dot < (1UL << 32));
  asm ("int $0x80 # %0 <- %1(%2 %3)"
       : "=a" (ret) : "0" (15), "b" (dot), "c" (0777));
  ret = snprintf (buf, sizeof buf,
  "result %ld (check mode on .!)\n", ret);
#elif defined __i386__
  asm (".code32\n"
       "pushl %%cs\n"
       "pushl $2f\n"
       "ljmpl $0x33, $1f\n"
       ".code64\n"
       "1: syscall # %0 <- %1(%2 %3)\n"
       "lretl\n"
       ".code32\n"
       "2:"
       : "=a" (ret) : "0" (4), "D" (dot), "S" (&st));
  if (ret == 0)
    ret = snprintf (buf, sizeof buf,
    "stat . -> st_uid=%u\n", st[7]);
  else
    ret = snprintf (buf, sizeof buf, "result %ld\n", ret);
#else
# error "not this one"
#endif

  write (1, buf, ret);

  syscall (__NR_exit, 1);
  return 2;
}

Signed-off-by: Roland McGrath <roland@redhat.com>
[ I don't know if anybody actually uses seccomp, but it's enabled in
  at least both Fedora and SuSE kernels, so maybe somebody is. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agox86-64: syscall-audit: fix 32/64 syscall hole
Roland McGrath [Sat, 28 Feb 2009 03:03:24 +0000 (19:03 -0800)]
x86-64: syscall-audit: fix 32/64 syscall hole

On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with
ljmp, and then use the "syscall" instruction to make a 64-bit system
call.  A 64-bit process make a 32-bit system call with int $0x80.

In both these cases, audit_syscall_entry() will use the wrong system
call number table and the wrong system call argument registers.  This
could be used to circumvent a syscall audit configuration that filters
based on the syscall numbers or argument details.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Mon, 2 Mar 2009 22:14:02 +0000 (23:14 +0100)]
Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace

15 years agotracing: make CALLER_ADDRx overwriteable
Uwe Kleine-Koenig [Fri, 27 Feb 2009 20:30:03 +0000 (21:30 +0100)]
tracing: make CALLER_ADDRx overwriteable

The current definition of CALLER_ADDRx isn't suitable for all platforms.
E.g. for ARM __builtin_return_address(N) doesn't work for N > 0 and
AFAIK for powerpc there are no frame pointers needed to have a working
__builtin_return_address.  This patch allows defining the CALLER_ADDRx
macros in <asm/ftrace.h> and let these take precedence.

Because now <asm/ftrace.h> is included unconditionally in
<linux/ftrace.h> all archs that don't already had this include get an
empty one for free.

Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agoMerge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Mon, 2 Mar 2009 21:38:31 +0000 (22:38 +0100)]
Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace

15 years agoMerge branches 'tracing/ftrace', 'tracing/mmiotrace' and 'linus' into tracing/core
Ingo Molnar [Mon, 2 Mar 2009 21:37:35 +0000 (22:37 +0100)]
Merge branches 'tracing/ftrace', 'tracing/mmiotrace' and 'linus' into tracing/core

15 years agosdhci: Add NO_BUSY_IRQ quirk for Marvell CAFE host chip
Andres Salomon [Mon, 2 Mar 2009 20:48:20 +0000 (21:48 +0100)]
sdhci: Add NO_BUSY_IRQ quirk for Marvell CAFE host chip

As described here: http://lkml.org/lkml/2009/2/20/265

The CAFE chip is broken due to commit e809517f6fa5803a5a1cd5602.
Anton added a quirk here: http://lkml.org/lkml/2009/2/20/279 that fixes
CAFE's problem.  This adds the quirk for CAFE.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
15 years agosdhci: Add quirk for controllers with no end-of-busy IRQ
Ben Dooks [Fri, 20 Feb 2009 17:33:08 +0000 (20:33 +0300)]
sdhci: Add quirk for controllers with no end-of-busy IRQ

The Samsung SDHCI (and FSL eSDHC) controller block seems to fail
to generate an INT_DATA_END after the transfer has completed and
the bus busy state finished.

Changes in e809517f6fa5803a5a1cd56026f0e2190fc13d5c to use the
new busy method are the cause of the behaviour change.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
15 years agotracing: add print format to event trace format files
Steven Rostedt [Mon, 2 Mar 2009 20:22:21 +0000 (15:22 -0500)]
tracing: add print format to event trace format files

This patch adds the internal print format used to print the raw events
to the event trace point format file.

 # cat /debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 29
format:
        field:unsigned char type;       offset:0;       size:1;
        field:unsigned char flags;      offset:1;       size:1;
        field:unsigned char preempt_count;      offset:2;       size:1;
        field:int pid;  offset:4;       size:4;
        field:int tgid; offset:8;       size:4;

        field:pid_t prev_pid;   offset:12;      size:4;
        field:int prev_prio;    offset:16;      size:4;
        field special:char next_comm[TASK_COMM_LEN];    offset:20;      size:16;
        field:pid_t next_pid;   offset:36;      size:4;
        field:int next_prio;    offset:40;      size:4;

print fmt: "prev %d:%d ==> next %s:%d:%d"

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: add trace name and id to event formats
Steven Rostedt [Mon, 2 Mar 2009 20:10:02 +0000 (15:10 -0500)]
tracing: add trace name and id to event formats

To be able to identify the trace in the binary format output, the
id of the trace event (which is dynamically assigned) must also be listed.

This patch adds the name of the trace point as well as the id assigned.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: add ftrace headers to event format files
Steven Rostedt [Mon, 2 Mar 2009 20:03:01 +0000 (15:03 -0500)]
tracing: add ftrace headers to event format files

This patch includes the ftrace header to the event formats files:

 # cat /debug/tracing/events/sched/sched_switch/format
        field:unsigned char type;       offset:0;       size:1;
        field:unsigned char flags;      offset:1;       size:1;
        field:unsigned char preempt_count;      offset:2;       size:1;
        field:int pid;  offset:4;       size:4;
        field:int tgid; offset:8;       size:4;

        field:pid_t prev_pid;   offset:12;      size:4;
        field:int prev_prio;    offset:16;      size:4;
        field special:char next_comm[TASK_COMM_LEN];    offset:20;      size:16;
        field:pid_t next_pid;   offset:36;      size:4;
        field:int next_prio;    offset:40;      size:4;

A blank line is used as a deliminator between the ftrace header and the
trace point fields.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: add format file to describe event struct fields
Steven Rostedt [Mon, 2 Mar 2009 18:53:59 +0000 (13:53 -0500)]
tracing: add format file to describe event struct fields

This patch adds the "format" file to the trace point event directory.
This is based off of work by Tom Zanussi, in which a file is exported
to be tread from user land such that a user space app may read the
binary record stored in the ring buffer.

 # cat /debug/tracing/events/sched/sched_switch/format
        field:pid_t prev_pid;   offset:12;      size:4;
        field:int prev_prio;    offset:16;      size:4;
        field special:char next_comm[TASK_COMM_LEN];    offset:20;      size:16;
        field:pid_t next_pid;   offset:36;      size:4;
        field:int next_prio;    offset:40;      size:4;

Idea-from: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: make trace_seq_reset global and rename to trace_seq_init
Steven Rostedt [Mon, 2 Mar 2009 19:04:40 +0000 (14:04 -0500)]
tracing: make trace_seq_reset global and rename to trace_seq_init

Impact: clean up

The trace_seq functions may be used separately outside of the ftrace
iterator. The trace_seq_reset is needed for these operations.

This patch also renames trace_seq_reset to the more appropriate
trace_seq_init.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: add protection around modify trace event fields
Steven Rostedt [Mon, 2 Mar 2009 16:49:04 +0000 (11:49 -0500)]
tracing: add protection around modify trace event fields

The trace event objects are currently not proctected against
reentrancy. This patch adds a mutex around the modifications of
the trace event fields.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: add TRACE_FIELD_SPECIAL to record complex entries
Steven Rostedt [Mon, 2 Mar 2009 15:53:15 +0000 (10:53 -0500)]
tracing: add TRACE_FIELD_SPECIAL to record complex entries

Tom Zanussi pointed out that the simple TRACE_FIELD was not enough to
record trace data that required memcpy. This patch addresses this issue
by adding a TRACE_FIELD_SPECIAL. The format is similar to TRACE_FIELD
but looks like so:

  TRACE_FIELD_SPECIAL(type_item, item, cmd)

What TRACE_FIELD gave was:

  TRACE_FIELD(type, item, assign)

The TRACE_FIELD would be used in declaring a structure:

  struct {
type item;
  };

And later assign it via:

  entry->item = assign;

What TRACE_FIELD_SPECIAL gives us is:

In the declaration of the structure:

  struct {
type_item;
  };

And the assignment:

  cmd;

This change log will explain the one example used in the patch:

 TRACE_EVENT_FORMAT(sched_switch,
TPPROTO(struct rq *rq, struct task_struct *prev,
struct task_struct *next),
TPARGS(rq, prev, next),
TPFMT("task %s:%d ==> %s:%d",
      prev->comm, prev->pid, next->comm, next->pid),
TRACE_STRUCT(
TRACE_FIELD(pid_t, prev_pid, prev->pid)
TRACE_FIELD(int, prev_prio, prev->prio)
TRACE_FIELD_SPECIAL(char next_comm[TASK_COMM_LEN],
    next_comm,
    TPCMD(memcpy(TRACE_ENTRY->next_comm,
 next->comm,
 TASK_COMM_LEN)))
TRACE_FIELD(pid_t, next_pid, next->pid)
TRACE_FIELD(int, next_prio, next->prio)
),
TPRAWFMT("prev %d:%d ==> next %s:%d:%d")
);

 The struct will be create as:

  struct {
pid_t prev_pid;
int prev_prio;
char next_comm[TASK_COMM_LEN];
pid_t next_pid;
int next_prio;
  };

Note the TRACE_ENTRY in the cmd part of TRACE_SPECIAL. TRACE_ENTRY will
be set by the tracer to point to the structure inside the trace buffer.

  entry->prev_pid = prev->pid;
  entry->prev_prio = prev->prio;
  memcpy(entry->next_comm, next->comm, TASK_COMM_LEN);
  entry->next_pid = next->pid;
  entry->next_prio = next->prio

Reported-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agox86 mmiotrace: fix race with release_kmmio_fault_page()
Pekka Paalanen [Tue, 24 Feb 2009 19:44:15 +0000 (21:44 +0200)]
x86 mmiotrace: fix race with release_kmmio_fault_page()

There was a theoretical possibility to a race between arming a page in
post_kmmio_handler() and disarming the page in
release_kmmio_fault_page():

cpu0                             cpu1
------------------------------------------------------------------
mmiotrace shutdown
enter release_kmmio_fault_page
                                 fault on the page
                                 disarm the page
disarm the page
                                 handle the MMIO access
                                 re-arm the page
put the page on release list
remove_kmmio_fault_pages()
                                 fault on the page
                                 page not known to mmiotrace
                                 fall back to do_page_fault()
                                 *KABOOM*

(This scenario also shows the double disarm case which is allowed.)

Fixed by acquiring kmmio_lock in post_kmmio_handler() and checking
if the page is being released from mmiotrace.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Cc: Stuart Bennett <stuart@freedesktop.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agox86 mmiotrace: improve handling of secondary faults
Stuart Bennett [Thu, 5 Feb 2009 11:02:02 +0000 (11:02 +0000)]
x86 mmiotrace: improve handling of secondary faults

Upgrade some kmmio.c debug messages to warnings.
Allow secondary faults on probed pages to fall through, and only log
secondary faults that are not due to non-present pages.

Patch edited by Pekka Paalanen.

Signed-off-by: Stuart Bennett <stuart@freedesktop.org>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agox86 mmiotrace: split set_page_presence()
Pekka Paalanen [Sun, 1 Mar 2009 14:12:48 +0000 (16:12 +0200)]
x86 mmiotrace: split set_page_presence()

From 36772dcb6ffbbb68254cbfc379a103acd2fbfefc Mon Sep 17 00:00:00 2001
From: Pekka Paalanen <pq@iki.fi>
Date: Sat, 28 Feb 2009 21:34:59 +0200

Split set_page_presence() in kmmio.c into two more functions set_pmd_presence()
and set_pte_presence(). Purely code reorganization, no functional changes.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Cc: Stuart Bennett <stuart@freedesktop.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agox86 mmiotrace: fix save/restore page table state
Pekka Paalanen [Sun, 1 Mar 2009 14:11:58 +0000 (16:11 +0200)]
x86 mmiotrace: fix save/restore page table state

From baa99e2b32449ec7bf147c234adfa444caecac8a Mon Sep 17 00:00:00 2001
From: Pekka Paalanen <pq@iki.fi>
Date: Sun, 22 Feb 2009 20:02:43 +0200

Blindly setting _PAGE_PRESENT in disarm_kmmio_fault_page() overlooks the
possibility, that the page was not present when it was armed.

Make arm_kmmio_fault_page() store the previous page presence in struct
kmmio_fault_page and use it on disarm.

This patch was originally written by Stuart Bennett, but Pekka Paalanen
rewrote it a little different.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Cc: Stuart Bennett <stuart@freedesktop.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agox86 mmiotrace: WARN_ONCE if dis/arming a page fails
Stuart Bennett [Fri, 30 Jan 2009 17:38:59 +0000 (17:38 +0000)]
x86 mmiotrace: WARN_ONCE if dis/arming a page fails

Print a full warning once, if arming or disarming a page fails.

Also, if initial arming fails, do not handle the page further. This
avoids the possibility of a page failing to arm and then later claiming
to have handled any fault on that page.

WARN_ONCE added by Pekka Paalanen.

Signed-off-by: Stuart Bennett <stuart@freedesktop.org>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agox86: add far read test to testmmiotrace
Pekka Paalanen [Sun, 1 Mar 2009 14:10:08 +0000 (16:10 +0200)]
x86: add far read test to testmmiotrace

Apparently pages far into an ioremapped region might not actually be
mapped during ioremap(). Add an optional read test to try to trigger a
multiply faulting MMIO access. Also add more messages to the kernel log
to help debugging.

This patch is based on a patch suggested by
Stuart Bennett <stuart@freedesktop.org>
who discovered bugs in mmiotrace related to normal kernel space faults.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Cc: Stuart Bennett <stuart@freedesktop.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agox86: count errors in testmmiotrace.ko
Pekka Paalanen [Sun, 1 Mar 2009 14:09:14 +0000 (16:09 +0200)]
x86: count errors in testmmiotrace.ko

Check the read values against the written values in the MMIO read/write
test. This test shows if the given MMIO test area really works as
memory, which is a prerequisite for a successful mmiotrace test.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Cc: Stuart Bennett <stuart@freedesktop.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agofix warning in io_mapping_map_wc()
Pallipadi, Venkatesh [Sun, 1 Mar 2009 16:53:27 +0000 (08:53 -0800)]
fix warning in io_mapping_map_wc()

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoALSA: hda - Add probe_mask default for Toshiba laptop with ALC268
Takashi Iwai [Sun, 1 Mar 2009 09:55:44 +0000 (10:55 +0100)]
ALSA: hda - Add probe_mask default for Toshiba laptop with ALC268

Some Toshiba laptops have another ALC268 codec on slot#3 that conflicts
with the primary codec.  The codec#3 is for the digital I/O, and should
be fixed by the driver, but it'd need a bunch of changes.

So, let's fix the probe problem temporarily by setting the default
probe_mask value.

Reference: kernel bugzilla #12735
http://bugzilla.kernel.org/show_bug.cgi?id=12735

Tested-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 years agozaurus: add usb id for motomagx phones
Dmitriy Taychenachev [Tue, 24 Feb 2009 18:42:48 +0000 (18:42 +0000)]
zaurus: add usb id for motomagx phones

The Motorola MOTOMAGX phones (Z6, E8, Zn5 so far) are providing
combined ACM/BLAN USB configuration. Since it has Vendor Specific
class, the corresponding drivers (cdc-acm, zaurus) can't find it just
by interface info. This patch adds usb id so the zaurus driver can
properly handle this combined device.

Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agousbnet: make usbnet_get_link() fall back to ethtool_op_get_link()
Bjørn Mork [Mon, 2 Mar 2009 04:45:40 +0000 (20:45 -0800)]
usbnet: make usbnet_get_link() fall back to ethtool_op_get_link()

Make usbnet_get_link() fall back to ethtool_op_get_link() instead of
defaulting to 1.

This makes usbnet_get_link return valid results without the need for a
driver specific check_connect or mii ops as long as the driver calls
netif_carrier_{on,off}() as appropriate.  cdc_ether is an example of
such a driver.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoveth: Fix carrier detect
Eric W. Biederman [Wed, 25 Feb 2009 19:47:29 +0000 (19:47 +0000)]
veth: Fix carrier detect

The current implementation of carrier detect in veth is broken.
It reports the link is down until both sides of the veth pair
are administatively up and then forever after it reports link up.

So fix veth so that it only reports link up when both interfaces
of the pair are administratively up.

Signed-off-by: Eric Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocdc_ether: add usb id for Ericsson F3507g
Bjørn Mork [Wed, 25 Feb 2009 04:33:58 +0000 (04:33 +0000)]
cdc_ether: add usb id for Ericsson F3507g

The Ericsson F3507g wireless broadband module provides a CDC Ethernet
compliant interface, but identifies it as a "Mobile Direct Line" CDC
subclass, thereby preventing the CDC Ethernet class driver from picking
it up.  This patch adds the device id to cdc_ether.c as a workaround.

Ericsson has provided a "class" driver for this device:
http://kerneltrap.org/mailarchive/linux-net/2008/10/28/3832094
But closer inspection of that driver reveals that it adds little more
than duplication of code from cdc_ether.c.  See also
http://marc.info/?l=linux-usb&m=123334979706403&w=2

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agor8169: read MAC address from EEPROM on init (2nd attempt)
Ivan Vecera [Mon, 2 Mar 2009 04:34:48 +0000 (20:34 -0800)]
r8169: read MAC address from EEPROM on init (2nd attempt)

This is 2nd attempt to implement the initialization/reading of MAC address
from EEPROM. The first used PCI's VPD and there were some problems, some
devices are not able to read EEPROM content by VPD. The 2nd one uses direct
access to EEPROM through bit-banging interface and my testing results seem
to be much better.

I tested 5 systems each with different Realtek NICs and I didn't find any
problem. AFAIK Francois's NICs also works fine.

Original description:
This fixes the problem when MAC address is set by ifconfig or by
ip link commands and this address is stored in the device after
reboot. The power-off is needed to get right MAC address.
This is problem when Xen daemon is running because it renames the device
name from ethX to pethX and sets its MAC address to FE:FF:FF:FF:FF:FF.
After reboot the device is still using FE:FF:FF:FF:FF:FF.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoselinux: Fix a panic in selinux_netlbl_inode_permission()
Paul Moore [Fri, 27 Feb 2009 20:00:03 +0000 (15:00 -0500)]
selinux: Fix a panic in selinux_netlbl_inode_permission()

Rick McNeal from LSI identified a panic in selinux_netlbl_inode_permission()
caused by a certain sequence of SUNRPC operations.  The problem appears to be
due to the lack of NULL pointer checking in the function; this patch adds the
pointer checks so the function will exit safely in the cases where the socket
is not completely initialized.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Signed-off-by: James Morris <jmorris@namei.org>
15 years agotcp: fix retrans_out leaks
Ilpo Järvinen [Sun, 1 Mar 2009 08:21:36 +0000 (00:21 -0800)]
tcp: fix retrans_out leaks

There's conflicting assumptions in shifting, the caller assumes
that dupsack results in S'ed skbs (or a part of it) for sure but
never gave a hint to tcp_sacktag_one when dsack is actually in
use. Thus DSACK retrans_out -= pcount was not taken and the
counter became out of sync. Remove obstacle from that information
flow to get DSACKs accounted in tcp_sacktag_one as expected.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Tested-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet headers: export dcbnl.h
Chris Leech [Fri, 27 Feb 2009 10:01:42 +0000 (10:01 +0000)]
net headers: export dcbnl.h

The DCB netlink interface is required for building the userspace tools
available at e1000.sourceforge.net

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet headers: cleanup dcbnl.h
Chris Leech [Fri, 27 Feb 2009 10:01:36 +0000 (10:01 +0000)]
net headers: cleanup dcbnl.h

1) add an include for <linux/types.h>
2) change dcbmsg.dcb_family from unsigned char to __u8 to be more
   consistent with use of kernel types

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetpoll: Add drop checks to all entry points
Herbert Xu [Sun, 1 Mar 2009 08:11:52 +0000 (00:11 -0800)]
netpoll: Add drop checks to all entry points

The netpoll entry checks are required to ensure that we don't
receive normal packets when invoked via netpoll.  Unfortunately
it only ever worked for the netif_receive_skb/netif_rx entry
points.  The VLAN (and subsequently GRO) entry point didn't
have the check and therefore can trigger all sorts of weird
problems.

This patch adds the netpoll check to all entry points.

I'm still uneasy with receiving at all under netpoll (which
apparently is only used by the out-of-tree kdump code).  The
reason is it is perfectly legal to receive all data including
headers into highmem if netpoll is off, but if you try to do
that with netpoll on and someone gets a printk in an IRQ handler
you're going to get a nice BUG_ON.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge branch 'master' of /home/davem/src/GIT/linux-2.6/
David S. Miller [Sat, 28 Feb 2009 23:36:58 +0000 (15:36 -0800)]
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

15 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Sat, 28 Feb 2009 23:34:24 +0000 (15:34 -0800)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

15 years agoInput: elantech - touchpad driver miss-recognising logitech mice
Arjan Opmeer [Sat, 28 Feb 2009 21:52:40 +0000 (13:52 -0800)]
Input: elantech - touchpad driver miss-recognising logitech mice

Some Logitech mice react to the magic knock like Elantech touchpad would.
This leads to those mice being misdetected as Elantech touchpads.  Add a
version query to elantech_detect() to distinguish the two.

[dtor@mail.ru:
 - lower severity of some messages - when we are not sure yet if
   device is Elantech or not not responding to knock is not an error.
]

Signed-off-by: Arjan Opmeer <arjan@opmeer.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
15 years agoInput: synaptics - ensure we reset the device on resume
Andy Whitcroft [Sat, 28 Feb 2009 20:51:01 +0000 (12:51 -0800)]
Input: synaptics - ensure we reset the device on resume

When resuming from suspend newer Synaptics touchpads do not recover
correctly.  Analysis of the resume sequence as applied in Linux was
compared to that of other operating systems.  This indicated that the
other OSs were resetting the mouse before attempting to detect it (for
all Synaptics touchpads, old and new).  Applying this same modification
fixes these newer Synaptics touchpads and brings the driver into line
with common OS reset behaviour.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
15 years agoInput: usbtouchscreen - fix eGalax HID ignoring
Daniel Ritz [Sat, 28 Feb 2009 20:50:54 +0000 (12:50 -0800)]
Input: usbtouchscreen - fix eGalax HID ignoring

Commit ec42d4481e36cbdb5b2801f957e678211a9e5ae2 broke usbtouchscreen for
some eGalax/EETI devices that claim to be HID, but are not.

Devices confirmed to be real HID have the class set to HID and the protocol
set to 'mouse'.  Some have HID class but protocol set to 'none'. Those are
not HID and should be driven by usbtouchscreen.

Fix the device ignoring macro by adding match for the protocol too.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
15 years agox86: i915 needs pgprot_writecombine() and is_io_mapping_possible()
Ingo Molnar [Sat, 28 Feb 2009 13:09:27 +0000 (14:09 +0100)]
x86: i915 needs pgprot_writecombine() and is_io_mapping_possible()

Impact: build fix

Theodore Ts reported that the i915 driver needs these symbols:

 ERROR: "pgprot_writecombine" [drivers/gpu/drm/i915/i915.ko] undefined!
 ERROR: "is_io_mapping_possible" [drivers/gpu/drm/i915/i915.ko] undefined!

Reported-by: Theodore Ts'o <tytso@mit.edu> wrote:
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoMerge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Sat, 28 Feb 2009 09:15:58 +0000 (10:15 +0100)]
Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace

15 years agotracing: create the C style tracing for the irq subsystem
Steven Rostedt [Sat, 28 Feb 2009 07:54:39 +0000 (02:54 -0500)]
tracing: create the C style tracing for the irq subsystem

This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the irq subsystem trace points.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: create the C style tracing for the sched subsystem
Steven Rostedt [Sat, 28 Feb 2009 07:47:59 +0000 (02:47 -0500)]
tracing: create the C style tracing for the sched subsystem

This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the sched subsystem trace points.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: add raw fast tracing interface for trace events
Steven Rostedt [Sat, 28 Feb 2009 07:41:25 +0000 (02:41 -0500)]
tracing: add raw fast tracing interface for trace events

This patch adds the interface to enable the C style trace points.
In the directory /debugfs/tracing/events/subsystem/event
We now have three files:

 enable : values 0 or 1 to enable or disable the trace event.

 available_types: values 'raw' and 'printf' which indicate the tracing
       types available for the trace point. If a developer does not
       use the TRACE_EVENT_FORMAT macro and just uses the TRACE_FORMAT
       macro, then only 'printf' will be available. This file is
       read only.

 type: values 'raw' or 'printf'. This indicates which type of tracing
       is active for that trace point. 'printf' is the default and
       if 'raw' is not available, this file is read only.

 # echo raw > /debug/tracing/events/sched/sched_wakeup/type
 # echo 1 > /debug/tracing/events/sched/sched_wakeup/enable

 Will enable the C style tracing for the sched_wakeup trace point.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: add raw trace point recording infrastructure
Steven Rostedt [Sat, 28 Feb 2009 00:12:30 +0000 (19:12 -0500)]
tracing: add raw trace point recording infrastructure

Impact: lower overhead tracing

The current event tracer can automatically pick up trace points
that are registered with the TRACE_FORMAT macro. But it required
a printf format string and parsing. Although, this adds the ability
to get guaranteed information like task names and such, it took
a hit in overhead processing. This processing can add about 500-1000
nanoseconds overhead, but in some cases that too is considered
too much and we want to shave off as much from this overhead as
possible.

Tom Zanussi recently posted tracing patches to lkml that are based
on a nice idea about capturing the data via C structs using
STRUCT_ENTER, STRUCT_EXIT type of macros.

I liked that method very much, but did not like the implementation
that required a developer to add data/code in several disjoint
locations.

This patch extends the event_tracer macros to do a similar "raw C"
approach that Tom Zanussi did. But instead of having the developers
needing to tweak a bunch of code all over the place, they can do it
all in one macro - preferably placed near the code that it is
tracing. That makes it much more likely that tracepoints will be
maintained on an ongoing basis by the code they modify.

The new macro TRACE_EVENT_FORMAT is created for this approach. (Note,
a developer may still utilize the more low level DECLARE_TRACE macros
if they don't care about getting their traces automatically in the event
tracer.)

They can also use the existing TRACE_FORMAT if they don't need to code
the tracepoint in C, but just want to use the convenience of printf.

So if the developer wants to "hardwire" a tracepoint in the fastest
possible way, and wants to acquire their data via a user space utility
in a raw binary format, or wants to see it in the trace output but not
sacrifice any performance, then they can implement the faster but
more complex TRACE_EVENT_FORMAT macro.

Here's what usage looks like:

  TRACE_EVENT_FORMAT(name,
TPPROTO(proto),
TPARGS(args),
TPFMT(fmt, fmt_args),
TRACE_STUCT(
TRACE_FIELD(type1, item1, assign1)
TRACE_FIELD(type2, item2, assign2)
[...]
),
TPRAWFMT(raw_fmt)
);

Note name, proto, args, and fmt, are all identical to what TRACE_FORMAT
uses.

 name: is the unique identifier of the trace point
 proto: The proto type that the trace point uses
 args: the args in the proto type
 fmt: printf format to use with the event printf tracer
 fmt_args: the printf argments to match fmt

 TRACE_STRUCT starts the ability to create a structure.
 Each item in the structure is defined with a TRACE_FIELD

  TRACE_FIELD(type, item, assign)

 type: the C type of item.
 item: the name of the item in the stucture
 assign: what to assign the item in the trace point callback

 raw_fmt is a way to pretty print the struct. It must match
  the order of the items are added in TRACE_STUCT

 An example of this would be:

 TRACE_EVENT_FORMAT(sched_wakeup,
TPPROTO(struct rq *rq, struct task_struct *p, int success),
TPARGS(rq, p, success),
TPFMT("task %s:%d %s",
      p->comm, p->pid, success?"succeeded":"failed"),
TRACE_STRUCT(
TRACE_FIELD(pid_t, pid, p->pid)
TRACE_FIELD(int, success, success)
),
TPRAWFMT("task %d success=%d")
);

 This creates us a unique struct of:

 struct {
pid_t pid;
int success;
 };

 And the way the call back would assign these values would be:

entry->pid = p->pid;
entry->success = success;

The nice part about this is that the creation of the assignent is done
via macro magic in the event tracer.  Once the TRACE_EVENT_FORMAT is
created, the developer will then have a faster method to record
into the ring buffer. They do not need to worry about the tracer itself.

The developer would only need to touch the files in include/trace/*.h

Again, I would like to give special thanks to Tom Zanussi for this
nice idea.

Idea-from: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
15 years agotracing: add interface to write into current tracer buffer
Steven Rostedt [Sat, 28 Feb 2009 00:38:04 +0000 (19:38 -0500)]
tracing: add interface to write into current tracer buffer

Right now all tracers must manage their own trace buffers. This was
to enforce tracers to be independent in case we finally decide to
allow each tracer to have their own trace buffer.

But now we are adding event tracing that writes to the current tracer's
buffer. This adds an interface to allow events to write to the current
tracer buffer without having to manage its own. Since event tracing
has no "tracer", and is just a way to hook into any other tracer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>