David Howells [Fri, 2 Jan 2009 13:44:49 +0000 (13:44 +0000)]
CRED: Wrap task credential accesses in the devpts filesystem
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Russell King [Fri, 2 Jan 2009 13:44:27 +0000 (13:44 +0000)]
And here's a patch (to be applied on top of the last) which prevents
this happening again by making use of 'const'.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Russell King [Fri, 2 Jan 2009 13:44:20 +0000 (13:44 +0000)]
Convert the oxsemi tornado special cases to use the quirk interface and not
scribble on its own reference structures.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Fri, 2 Jan 2009 13:44:04 +0000 (13:44 +0000)]
tty: Fix close races in USB serial
USB serial has always had races where the tty port usage count can hit zero
during a receive event. The internal locking is a mutex so we can't use
that in the IRQ handlers.
With krefs we can tackle this differently but we still need to be careful.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Peterson [Fri, 2 Jan 2009 13:43:40 +0000 (13:43 +0000)]
n_tty: Output bells immediately on a full buffer
This patch causes "bell" (^G) characters (invoked when the input buffer
is full) to be immediately output rather than filling the echo buffer.
This is especially a problem when the tty is stopped and buffers fill, since
the bells do not serve their purpose of immediate notification that the
buffer cannot take further input, and they will flush all at once when the
tty is restarted.
Signed-off-by: Joe Peterson <joe@skyrush.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Peterson [Fri, 2 Jan 2009 13:43:32 +0000 (13:43 +0000)]
n_tty: Fix hanfling of buffer full corner cases
Fix the handling of input characters when the tty buffer is full or nearly
full. This includes tests that are done in n_tty_receive_char() and handling
of PARMRK.
Problems with the buffer-full tests done in receive_char() caused characters to
be lost at times when the buffer(s) filled. Also, these full conditions
would often only be detected with echo on, and PARMRK was not accounted for
properly in all cases. One symptom of these problems, in addition to lost
characters, was early termination from unix commands like tr and cat when
^Q was used to break from a stopped tty with full buffers (note that breaking
out was often previously not possible, due to the pty getting in "gridlock",
which will be addressed in another patch). Note space is always reserved
at the end of the buffer for a newline (or EOF/EOL) in canonical mode.
Signed-off-by: Joe Peterson <joe@skyrush.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Peterson [Fri, 2 Jan 2009 13:43:25 +0000 (13:43 +0000)]
n_tty: Fix handling of control characters and continuations
Fix process_output_block to detect continuation characters correctly
and to handle control characters even when O_OLCUC is enabled. Make
similar change to do_output_char().
Signed-off-by: Joe Peterson <joe@skyrush.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To support containers, allow multiple instances of devpts filesystem, such
that indices of ptys allocated in one instance are independent of ptys
allocated in other instances of devpts.
But to preserve backward compatibility, enable this support for multiple
instances only if:
- CONFIG_DEVPTS_MULTIPLE_INSTANCES is set to Y, and
- '-o newinstance' mount option is specified while mounting devpts
To use multi-instance mount, a container startup script could:
where 'ns_exec -cm /bin/bash' is calls clone() with CLONE_NEWNS flag and execs
/bin/bash in the child process. A pty created by the sshd is not visible in
the original mount of /dev/pts.
USER-SPACE-IMPACT:
- See Documentation/fs/devpts.txt (included in next patch) for user-
space impact in multi-instance and mixed-mode operation.
TODO:
- Update mount(8), pts(4) man pages. Highlight impact of not
redirecting /dev/ptmx to /dev/pts/ptmx after a multi-instance mount.
Changelog[v6]:
- [Dave Hansen] Use new get_init_pts_sb() interface
- [Serge Hallyn] Don't bother displaying 'newinstance' in show_options
- [Serge Hallyn] Use macros (PARSE_REMOUNT/PARSE_MOUNT) instead of 0/1.
- [Serge Hallyn] Check error return from get_sb_single() (now
get_init_pts_sb())
- devpts_pty_kill(): don't dput error dentries
Changelog[v5]:
- Move get_sb_ref() definition to earlier patch
- Move usage info to Documentation/filesystems/devpts.txt (next patch)
- Make ptmx node even in init_pts_ns, now that default mode is 0000
(defined in earlier patch, enabled here).
- Cache ptmx dentry and use to update mode during remount
(defined in earlier patch, enabled here).
- Bugfix: explicitly ignore newinstance on remount (if newinstance was
specified on remount of initial mount, it would be ignored but
/proc/mounts would imply that the option was set)
Changelog[v4]:
- Update patch description to address H. Peter Anvin's comments
- Consolidate multi-instance mode code under new config token,
CONFIG_DEVPTS_MULTIPLE_INSTANCE.
- Move usage-details from patch description to
Documentation/fs/devpts.txt
Changelog[v3]:
- Rename new mount option to 'newinstance'
- Create ptmx nodes only in 'newinstance' mounts
- Bugfix: parse_mount_options() modifies @data but since we need to
parse the @data twice (once in devpts_get_sb() and once during
do_remount_sb()), parse a local copy of @data in devpts_get_sb().
(restructured code in devpts_get_sb() to fix this)
Changelog[v2]:
- Support both single-mount and multiple-mount semantics and
provide '-onewmnt' option to select the semantics.
/dev/ptmx is closely tied to the devpts filesystem. An open of /dev/ptmx,
allocates the next pty index and the associated device shows up in the
devpts fs as /dev/pts/n.
Wih multiple instancs of devpts filesystem, during an open of /dev/ptmx
we would be unable to determine which instance of the devpts is being
accessed.
So we move the 'ptmx' node into /dev/pts and use the inode of the 'ptmx'
node to identify the superblock and hence the devpts instance. This patch
adds ability for the kernel to internally create the [ptmx, c, 5:2] device
when mounting devpts filesystem. Since the ptmx node in devpts is new and
may surprise some userspace scripts, the default permissions for the new
node is 0000. These permissions can be changed either using chmod or by
remounting with the new '-o ptmxmode=0666' mount option.
Changelog[v5]:
- [Serge Hallyn bugfix]: Letting new_inode() assign inode number to
ptmx can collide with hand-assigning inode numbers to ptys. So,
hand-assign specific inode number to ptmx node also.
- [Serge Hallyn]: Maybe safer to grab root dentry mutex while creating
ptmx node
- [Bugfix with Serge Hallyn] Replace lookup_one_len() in mknod_ptmx()
wih d_alloc_name() (lookup during ->get_sb() locks up system). To
simplify patchset, fold the ptmx_dentry patch into this.
Changelog[v4]:
- Change default permissions of pts/ptmx node to 0000.
- Move code for ptmxmode under #ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES.
Changelog[v3]:
- Rename ptmx_mode to ptmxmode (for consistency with 'newinstance')
Changelog[v2]:
- [H. Peter Anvin] Remove mknod() system call support and create the
ptmx node internally.
Changelog[v1]:
- Earlier version of this patch enabled creating /dev/pts/tty as
well. As pointed out by Al Viro and H. Peter Anvin, that is not
really necessary.
With support for multiple mounts of devpts, the 'config' structure really
represents per-mount options rather than config parameters. Rename 'config'
structure to 'pts_mount_opts' and store it in the super-block.
To enable multiple mounts of devpts, 'allocated_ptys' must be a per-mount
variable rather than a global variable. Move 'allocated_ptys' into the
super_block's s_fs_info.
Changelog[v2]:
Define and use DEVPTS_SB() wrapper.
Remove the 'devpts_root' global variable and find the root dentry using
the super_block. The super-block can be found from the device inode, using
the new wrapper, pts_sb_from_inode().
Changelog: This patch is based on an earlier patchset from Serge Hallyn
and Matt Helsley.
Joe Peterson [Fri, 2 Jan 2009 13:40:53 +0000 (13:40 +0000)]
n_tty: Fix loss of echoed characters and remove bkl from n_tty
Fixes the loss of echoed (and other ldisc-generated characters) when
the tty is stopped or when the driver output buffer is full (happens
frequently for input during continuous program output, such as ^C)
and removes the Big Kernel Lock from the N_TTY line discipline.
Adds an "echo buffer" to the N_TTY line discipline that handles all
ldisc-generated output (including echoed characters). Along with the
loss of characters, this also fixes the associated loss of sync between
tty output and the ldisc state when characters cannot be immediately
written to the tty driver.
The echo buffer stores (in addition to characters) state operations that need
to be done at the time of character output (like management of the column
position). This allows echo to cooperate correctly with program output,
since the ldisc state remains consistent with actual characters written.
Since the echo buffer code now isolates the tty column state code
to the process_out* and process_echoes functions, we can remove the
Big Kernel Lock (BKL) and replace it with mutex locks.
Highlights are:
* Handles echo (and other ldisc output) when tty driver buffer is full
- continuous program output can block echo
* Saves echo when tty is in stopped state (e.g. ^S)
- (e.g.: ^Q will correctly cause held characters to be released for output)
* Control character pairs (e.g. "^C") are treated atomically and not
split up by interleaved program output
* Line discipline state is kept consistent with characters sent to
the tty driver
* Remove the big kernel lock (BKL) from N_TTY line discipline
Signed-off-by: Joe Peterson <joe@skyrush.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Graf Yang [Fri, 2 Jan 2009 13:40:22 +0000 (13:40 +0000)]
Blackfin Serial Driver: fix bug - SIR driver stop receiving randomly
Bug description:
The IRDA receiver may can't receiving any more after processed some signals.
To duplicate this issue is put three IRDA devices together, one blackfin,
two none blackfin, they will detect each other. Let one none blackfin devices
irdaping the blackfin devices, when it stopped print out ping information,
it is the time that blackfin stoped receiving, the time is random.
The related register bit is OK, the other devices is sending data continuously.
But no interrupt come.
Fixing:
I tried Michael's suggestion that request the UARTx error interrupt, and reset
the IRDA when found FE error. This method helps much, but it can't completely
avoid stop.
Reset the IRDA before every time sending the data is more safe.
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 31 Dec 2008 23:57:56 +0000 (15:57 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (34 commits)
nfsd race fixes: jfs
nfsd race fixes: reiserfs
nfsd race fixes: ext4
nfsd race fixes: ext3
nfsd race fixes: ext2
nfsd/create race fixes, infrastructure
filesystem notification: create fs/notify to contain all fs notification
fs/block_dev.c: __read_mostly improvement and sb_is_blkdev_sb utilization
kill ->dir_notify()
filp_cachep can be static in fs/file_table.c
fix f_count description in Documentation/filesystems/files.txt
make INIT_FS use the __RW_LOCK_UNLOCKED initialization
take init_fs to saner place
kill vfs_permission
pass a struct path * to may_open
kill walk_init_root
remove incorrect comment in inode_permission
expand some comments (d_path / seq_path)
correct wrong function name of d_put in kernel document and source comment
fix switch_names() breakage in short-to-short case
...
Al Viro [Tue, 30 Dec 2008 06:52:35 +0000 (01:52 -0500)]
nfsd race fixes: ext2
* make ext2_new_inode() put the inode into icache in locked state
* do not unlock until the inode is fully set up; otherwise nfsd
might pick it in half-baked state.
* make sure that ext2_new_inode() does *not* lead to two inodes with the
same inumber hashed at the same time; otherwise a bogus fhandle coming
from nfsd might race with inode creation:
nfsd: iget_locked() creates inode
nfsd: try to read from disk, block on that.
ext2_new_inode(): allocate inode with that inumber
ext2_new_inode(): insert it into icache, set it up and dirty
ext2_write_inode(): get the relevant part of inode table in cache,
set the entry for our inode (and start writing to disk)
nfsd: get CPU again, look into inode table, see nice and sane on-disk
inode, set the in-core inode from it
oops - we have two in-core inodes with the same inumber live in icache,
both used for IO. Welcome to fs corruption...
Al Viro [Tue, 30 Dec 2008 06:48:21 +0000 (01:48 -0500)]
nfsd/create race fixes, infrastructure
new helpers - insert_inode_locked() and insert_inode_locked4().
Hash new inode, making sure that there's no such inode in icache
already. If there is and it does not end up unhashed (as would
happen if we have nfsd trying to resolve a bogus fhandle), fail.
Otherwise insert our inode into hash and succeed.
In either case have i_state set to new+locked; cleanup ends up
being simpler with such calling conventions.
Eric Paris [Wed, 17 Dec 2008 18:59:41 +0000 (13:59 -0500)]
filesystem notification: create fs/notify to contain all fs notification
Creating a generic filesystem notification interface, fsnotify, which will be
used by inotify, dnotify, and eventually fanotify is really starting to
clutter the fs directory. This patch simply moves inotify and dnotify into
fs/notify/inotify and fs/notify/dnotify respectively to make both current fs/
and future notification tidier.
Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Fri, 26 Dec 2008 05:57:40 +0000 (00:57 -0500)]
kill ->dir_notify()
Remove the hopelessly misguided ->dir_notify(). The only instance (cifs)
has been broken by design from the very beginning; the objects it creates
are never destroyed, keep references to struct file they can outlive, nothing
that could possibly evict them exists on close(2) path *and* no locking
whatsoever is done to prevent races with close(), should the previous, er,
deficiencies someday be dealt with.
Eric Dumazet [Wed, 10 Dec 2008 17:35:45 +0000 (09:35 -0800)]
filp_cachep can be static in fs/file_table.c
Instead of creating the "filp" kmem_cache in vfs_caches_init(),
we can do it a litle be later in files_init(), so that filp_cachep
is static to fs/file_table.c
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Eric Dumazet [Wed, 10 Dec 2008 17:35:45 +0000 (09:35 -0800)]
fix f_count description in Documentation/filesystems/files.txt
Documentation/filesystems/files.txt was not updated when
f_count became an atomic_long_t.
atomic_long_inc_not_zero() is now used instead of atomic_inc_not_zero()
Steven Rostedt [Wed, 10 Dec 2008 23:37:28 +0000 (18:37 -0500)]
make INIT_FS use the __RW_LOCK_UNLOCKED initialization
[AV: rediffed on top of unification of init_fs]
Initialization of init_fs still uses the deprecated RW_LOCK_UNLOCKED macro.
This patch updates it to use the __RW_LOCK_UNLOCKED(lock) macro.
Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With all the nameidata removal there's no point anymore for this helper.
Of the three callers left two will go away with the next lookup series
anyway.
Also add proper kerneldoc to inode_permission as this is the main
permission check routine now.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Explain that you really need to use the return value of d_path rather than
the buffer you passed into it.
Also fix the comment for seq_path(), the function arguments changed
recently but the comment hadn't been updated in sync.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Zhaolei [Mon, 1 Dec 2008 22:34:58 +0000 (14:34 -0800)]
correct wrong function name of d_put in kernel document and source comment
no function named d_put(), it should be dput().
Impact: fix document and comment, no functionality changed
Signed-off-by: Zhao Lei <zhaolei@cn.fuijtsu.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Duane Griffin [Fri, 19 Dec 2008 20:47:12 +0000 (20:47 +0000)]
vfs: ensure page symlinks are NUL-terminated
On-disk data corruption could cause a page link to have its i_size set
to PAGE_SIZE (or a multiple thereof) and its contents all non-NUL.
NUL-terminate the link name to ensure this doesn't cause further
problems for the kernel.
Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Duane Griffin <duaneg@dghda.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Duane Griffin [Fri, 19 Dec 2008 20:47:11 +0000 (20:47 +0000)]
vfs: introduce helper function to safely NUL-terminate symlinks
A number of filesystems were potentially triggering kernel bugs due to
corrupted symlink names on disk. This function helps safely terminate
the names.
Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Duane Griffin <duaneg@dghda.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Duane Griffin [Fri, 19 Dec 2008 20:47:10 +0000 (20:47 +0000)]
eCryptfs: check readlink result was not an error before using it
The result from readlink is being used to index into the link name
buffer without checking whether it is a valid length. If readlink
returns an error this will fault or cause memory corruption.
Julia Lawall [Mon, 1 Dec 2008 22:34:51 +0000 (14:34 -0800)]
fs/namespace.c: drop code after return
The extra semicolon serves no purpose.
Signed-off-by: Julia Lawall <julia@diku.dk> Reviewed-by: Richard Genoud <richard.genoud@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jan Engelhardt [Mon, 1 Dec 2008 22:34:50 +0000 (14:34 -0800)]
include: linux/fs.h: put declarations in __KERNEL__
include/linux/fs.h contains externs for a bunch of variables. That obviously
belongs under ifdef __KERNEL__.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Nick Piggin [Mon, 1 Dec 2008 08:33:43 +0000 (09:33 +0100)]
shrink struct dentry
struct dentry is one of the most critical structures in the kernel. So it's
sad to see it going neglected.
With CONFIG_PROFILING turned on (which is probably the common case at least
for distros and kernel developers), sizeof(struct dcache) == 208 here
(64-bit). This gives 19 objects per slab.
I packed d_mounted into a hole, and took another 4 bytes off the inline
name length to take the padding out from the end of the structure. This
shinks it to 200 bytes. I could have gone the other way and increased the
length to 40, but I'm aiming for a magic number, read on...
I then got rid of the d_cookie pointer. This shrinks it to 192 bytes. Rant:
why was this ever a good idea? The cookie system should increase its hash
size or use a tree or something if lookups are a problem. Also the "fast
dcookie lookups" in oprofile should be moved into the dcookie code -- how
can oprofile possibly care about the dcookie_mutex? It gets dropped after
get_dcookie() returns so it can't be providing any sort of protection.
At 192 bytes, 21 objects fit into a 4K page, saving about 3MB on my system
with ~140 000 entries allocated. 192 is also a multiple of 64, so we get
nice cacheline alignment on 64 and 32 byte line systems -- any given dentry
will now require 3 cachelines to touch all fields wheras previously it
would require 4.
I know the inline name size was chosen quite carefully, however with the
reduction in cacheline footprint, it should actually be just about as fast
to do a name lookup for a 36 character name as it was before the patch (and
faster for other sizes). The memory footprint savings for names which are
<= 32 or > 36 bytes long should more than make up for the memory cost for
33-36 byte names.
Richard Kennedy [Thu, 4 Dec 2008 11:17:47 +0000 (11:17 +0000)]
fs: reorder struct inotify_device on 64bits to remove padding
Reorder struct inotify_device to remove 8 bytes of padding on 64bit
builds, reducing size to 128 bytes . Therefore allocating from a smaller
slab & using one fewer cachelines.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
----
Hi,
patch against 2.6.28-rc7.
built & tested on AMDX2 desktop.
I've not been able to send this to the listed inotify maintainers, I
just get mail failures. So I guessed filesystem was the best home for
it, hope that's ok.
regards
Richard Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Wed, 31 Dec 2008 17:00:59 +0000 (09:00 -0800)]
Merge branch 'irq-fixes-for-linus-4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-fixes-for-linus-4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sparseirq: move __weak symbols into separate compilation unit
sparseirq: work around __weak alias bug
sparseirq: fix hang with !SPARSE_IRQ
sparseirq: set lock_class for legacy irq when sparse_irq is selected
sparseirq: work around compiler optimizing away __weak functions
sparseirq: fix desc->lock init
sparseirq: do not printk when migrating IRQ descriptors
sparseirq: remove duplicated arch_early_irq_init()
irq: simplify for_each_irq_desc() usage
proc: remove ifdef CONFIG_SPARSE_IRQ from stat.c
irq: for_each_irq_desc() move to irqnr.h
hrtimer: remove #include <linux/irq.h>
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
fat: make sure to set d_ops in fat_get_parent
fat: fix duplicate addition of ->llseek handler
fat: drop negative dentry on rename() path
Linus Torvalds [Wed, 31 Dec 2008 01:48:25 +0000 (17:48 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (184 commits)
[XFS] Fix race in xfs_write() between direct and buffered I/O with DMAPI
[XFS] handle unaligned data in xfs_bmbt_disk_get_all
[XFS] avoid memory allocations in xfs_fs_vcmn_err
[XFS] Fix speculative allocation beyond eof
[XFS] Remove XFS_BUF_SHUT() and friends
[XFS] Use the incore inode size in xfs_file_readdir()
[XFS] set b_error from bio error in xfs_buf_bio_end_io
[XFS] use inode_change_ok for setattr permission checking
[XFS] add a FMODE flag to make XFS invisible I/O less hacky
[XFS] resync headers with libxfs
[XFS] simplify projid check in xfs_rename
[XFS] replace b_fspriv with b_mount
[XFS] Remove unused tracing code
[XFS] Remove unnecessary assertion
[XFS] Remove unused variable in ktrace_free()
[XFS] Check return value of xfs_buf_get_noaddr()
[XFS] Fix hang after disallowed rename across directory quota domains
[XFS] Fix compile with CONFIG_COMPAT enabled
move inode tracing out of xfs_vnode.
move vn_iowait / vn_iowake into xfs_aops.c
...
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (70 commits)
fs/nfs/nfs4proc.c: make nfs4_map_errors() static
rpc: add service field to new upcall
rpc: add target field to new upcall
nfsd: support callbacks with gss flavors
rpc: allow gss callbacks to client
rpc: pass target name down to rpc level on callbacks
nfsd: pass client principal name in rsc downcall
rpc: implement new upcall
rpc: store pointer to pipe inode in gss upcall message
rpc: use count of pipe openers to wait for first open
rpc: track number of users of the gss upcall pipe
rpc: call release_pipe only on last close
rpc: add an rpc_pipe_open method
rpc: minor gss_alloc_msg cleanup
rpc: factor out warning code from gss_pipe_destroy_msg
rpc: remove unnecessary assignment
NFS: remove unused status from encode routines
NFS: increment number of operations in each encode routine
NFS: fix comment placement in nfs4xdr.c
NFS: fix tabs in nfs4xdr.c
...
Linus Torvalds [Wed, 31 Dec 2008 01:45:28 +0000 (17:45 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/mlx4: Fix reading SL field out of cqe->sl_vid
RDMA/addr: Fix build breakage when IPv6 is disabled
Linus Torvalds [Wed, 31 Dec 2008 01:41:32 +0000 (17:41 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (583 commits)
V4L/DVB (10130): use USB API functions rather than constants
V4L/DVB (10129): dvb: remove deprecated use of RW_LOCK_UNLOCKED in frontends
V4L/DVB (10128): modify V4L documentation to be a valid XHTML
V4L/DVB (10127): stv06xx: Avoid having y unitialized
V4L/DVB (10125): em28xx: Don't do AC97 vendor detection for i2s audio devices
V4L/DVB (10124): em28xx: expand output formats available
V4L/DVB (10123): em28xx: fix reversed definitions of I2S audio modes
V4L/DVB (10122): em28xx: don't load em28xx-alsa for em2870 based devices
V4L/DVB (10121): em28xx: remove worthless Pinnacle PCTV HD Mini 80e device profile
V4L/DVB (10120): em28xx: remove redundant Pinnacle Dazzle DVC 100 profile
V4L/DVB (10119): em28xx: fix corrupted XCLK value
V4L/DVB (10118): zoran: fix warning for a variable not used
V4L/DVB (10116): af9013: Fix gcc false warnings
V4L/DVB (10111a): usbvideo.h: remove an useless blank line
V4L/DVB (10111): quickcam_messenger.c: fix a warning
V4L/DVB (10110): v4l2-ioctl: Fix warnings when using .unlocked_ioctl = __video_ioctl2
V4L/DVB (10109): anysee: Fix usage of an unitialized function
V4L/DVB (10104): uvcvideo: Add support for video output devices
V4L/DVB (10102): uvcvideo: Ignore interrupt endpoint for built-in iSight webcams.
V4L/DVB (10101): uvcvideo: Fix bulk URB processing when the header is erroneous
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
net: Fix percpu counters deadlock
cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits: net
drivers/net/usb: use USB API functions rather than constants
cls_cgroup: clean up Kconfig
cls_cgroup: clean up for cgroup part
cls_cgroup: fix an oops when removing a cgroup
EtherExpress16: fix printing timed out status
mlx4_en: Added "set_ringparam" Ethtool interface implementation
mlx4_en: Always allocate RX ring for each interrupt vector
mlx4_en: Verify number of RX rings doesn't exceed MAX_RX_RINGS
IPVS: Make "no destination available" message more consistent between schedulers
net: KS8695: removed duplicated #include
tun: Fix SIOCSIFHWADDR error.
smsc911x: compile fix re netif_rx signature changes
netns: foreach_netdev_safe is insufficient in default_device_exit
net: make xfrm_statistics_seq_show use generic snmp_fold_field
net: Fix more NAPI interface netdev argument drop fallout.
net: Fix unused variable warnings in pasemi_mac.c and spider_net.c
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
lguest: struct device - replace bus_id with dev_name()
lguest: move the initial guest page table creation code to the host
kvm-s390: implement config_changed for virtio on s390
virtio_console: support console resizing
virtio: add PCI device release() function
virtio_blk: fix type warning
virtio: block: dynamic maximum segments
virtio: set max_segment_size and max_sectors to infinite.
virtio: avoid implicit use of Linux page size in balloon interface
virtio: hand virtio ring alignment as argument to vring_new_virtqueue
virtio: use KVM_S390_VIRTIO_RING_ALIGN instead of relying on pagesize
virtio: use LGUEST_VRING_ALIGN instead of relying on pagesize
virtio: Don't use PAGE_SIZE for vring alignment in virtio_pci.
virtio: rename 'pagesize' arg to vring_init/vring_size
virtio: Don't use PAGE_SIZE in virtio_pci.c
virtio: struct device - replace bus_id with dev_name(), dev_set_name()
virtio-pci queue allocation not page-aligned
Linus Torvalds [Wed, 31 Dec 2008 01:36:49 +0000 (17:36 -0800)]
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
[ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
[ARM] pxafb: cleanup of the timing checking code
[ARM] pxafb: cleanup of the color format manipulation code
[ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
[ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
[ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
[ARM] pxafb: allow video memory size to be configurable
[ARM] pxa: add document on the MFP design and how to use it
[ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
[ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
[ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
[ARM] pxa: Update eseries defconfig
[ARM] 5352/1: add w90p910-plat config file
[ARM] s3c: S3C options should depend on PLAT_S3C
[ARM] mv78xx0: implement GPIO and GPIO interrupt support
[ARM] Kirkwood: implement GPIO and GPIO interrupt support
[ARM] Orion: share GPIO IRQ handling code
[ARM] Orion: share GPIO handling code
[ARM] s3c: define __io using the typesafe version
[ARM] S3C64XX: Ensure CPU_V6 is selected
...
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (33 commits)
ide-cd: remove dead dsc_overlap setting
ide: push local_irq_{save,restore}() to do_identify()
ide: remove superfluous local_irq_{save,restore}() from ide_dump_status()
ide: move legacy ISA/VLB ports handling to ide-legacy.c (v2)
ide: move Power Management support to ide-pm.c
ide: use ATA_DMA_* defines in ide-dma-sff.c
ide: checkpatch.pl fixes for ide-lib.c
ide: remove inline tags from ide-probe.c
ide: remove redundant code from ide_end_drive_cmd()
ide: struct device - replace bus_id with dev_name(), dev_set_name()
ide: rework handling of serialized ports (v2)
cy82c693: remove superfluous ide_cy82c693 chipset type
trm290: add IDE_HFLAG_TRM290 host flag
ide: add ->max_sectors field to struct ide_port_info
rz1000: apply chipset quirks early (v2)
ide: always set nIEN on idle devices
ide: fix ->quirk_list checking in ide_do_request()
gayle: set IDE_HFLAG_SERIALIZE explictly
cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
ali14xx: doesn't use shared IRQs
...
Linus Torvalds [Wed, 31 Dec 2008 01:32:25 +0000 (17:32 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
sata_sil: add Large Block Transfer support
[libata] ata_piix: cleanup dmi strings checking
DMI: add dmi_match
libata: blacklist NCQ on OCZ CORE 2 SSD (resend)
[libata] Update kernel-doc comments to match source code
libata: perform port detach in EH
libata: when restoring SControl during detach do the PMP links first
libata: beef up iterators
Linus Torvalds [Wed, 31 Dec 2008 01:31:25 +0000 (17:31 -0800)]
Merge branch 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
oprofile: select RING_BUFFER
ring_buffer: adding EXPORT_SYMBOLs
oprofile: fix lost sample counter
oprofile: remove nr_available_slots()
oprofile: port to the new ring_buffer
ring_buffer: add remaining cpu functions to ring_buffer.h
oprofile: moving cpu_buffer_reset() to cpu_buffer.h
oprofile: adding cpu_buffer_entries()
oprofile: adding cpu_buffer_write_commit()
oprofile: adding cpu buffer r/w access functions
ftrace: remove unused function arg in trace_iterator_increment()
ring_buffer: update description for ring_buffer_alloc()
oprofile: set values to default when creating oprofilefs
oprofile: implement switch/case in buffer_sync.c
x86/oprofile: cleanup IBS init/exit functions in op_model_amd.c
x86/oprofile: reordering IBS code in op_model_amd.c
oprofile: fix typo
oprofile: whitspace changes only
oprofile: update comment for oprofile_add_sample()
oprofile: comment cleanup
Linus Torvalds [Wed, 31 Dec 2008 01:28:09 +0000 (17:28 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
slub: avoid leaking caches or refcounts on sysfs error
slab: Fix comment on #endif
slab: remove GFP_THISNODE clearing from alloc_slabmgmt()
slub: Add might_sleep_if() to slab_alloc()
SLUB: failslab support
slub: Fix incorrect use of loose
slab: Update the kmem_cache_create documentation regarding the name parameter
slub: make early_kmem_cache_node_alloc void
slab: unsigned slabp->inuse cannot be less than 0
slub - fix get_object_page comment
SLUB: Replace __builtin_return_address(0) with _RET_IP_.
SLUB: cleanup - define macros instead of hardcoded numbers
Linus Torvalds [Wed, 31 Dec 2008 01:25:49 +0000 (17:25 -0800)]
Merge branch 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (37 commits)
drm/i915: fix modeset devname allocation + agp init return check.
drm/i915: Remove redundant test in error path.
drm: Add a debug node for vblank state.
drm: Avoid use-before-null-test on dev in drm_cleanup().
drm/i915: Don't print to dmesg when taking signal during object_pin.
drm: pin new and unpin old buffer when setting a mode.
drm/i915: un-EXPORT and make 'intelfb_panic' static
drm/i915: Delete unused, pointless i915_driver_firstopen.
drm/i915: fix sparse warnings: returning void-valued expression
drm/i915: fix sparse warnings: move 'extern' decls to header file
drm/i915: fix sparse warnings: make symbols static
drm/i915: fix sparse warnings: declare one-bit bitfield as unsigned
drm/i915: Don't double-unpin buffers if we take a signal in evict_everything().
drm/i915: Fix fbcon setup to align display pitch to 64b.
drm/i915: Add missing userland definitions for gem init/execbuffer.
i915/drm: provide compat defines for userspace for certain struct members.
drm: drop DRM_IOCTL_MODE_REPLACEFB, add+remove works just as well.
drm: sanitise drm modesetting API + remove unused hotplug
drm: fix allowing master ioctls on non-master fds.
drm/radeon: use locked rmmap to remove sarea mapping.
...
Linus Torvalds [Wed, 31 Dec 2008 01:25:29 +0000 (17:25 -0800)]
Merge branch 'agp-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6
* 'agp-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
agp/intel: Fix broken ® symbol in device name.
agp/intel: add support for G41 chipset
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (98 commits)
sparc: move select of ARCH_SUPPORTS_MSI
sparc: drop SUN_IO
sparc: unify sections.h
sparc: use .data.init_task section for init_thread_union
sparc: fix array overrun check in of_device_64.c
sparc: unify module.c
sparc64: prepare module_64.c for unification
sparc64: use bit neutral Elf symbols
sparc: unify module.h
sparc: introduce CONFIG_BITS
sparc: fix hardirq.h removal fallout
sparc64: do not export pus_fs_struct
sparc: use sparc64 version of scatterlist.h
sparc: Commonize memcmp assembler.
sparc: Unify strlen assembler.
sparc: Add asm/asm.h
sparc: Kill memcmp_32.S code which has been ifdef'd out for centuries.
sparc: replace for_each_cpu_mask_nr with for_each_cpu
sparc: fix sparse warnings in irq_32.c
sparc: add include guards to kernel.h
...
Linus Torvalds [Wed, 31 Dec 2008 01:20:05 +0000 (17:20 -0800)]
Merge branch 'for-2.6.29' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.29' of git://git.kernel.dk/linux-2.6-block: (43 commits)
bio: get rid of bio_vec clearing
bounce: don't rely on a zeroed bio_vec list
cciss: simplify parameters to deregister_disk function
cfq-iosched: fix race between exiting queue and exiting task
loop: Do not call loop_unplug for not configured loop device.
loop: Flush possible running bios when loop device is released.
alpha: remove dead BIO_VMERGE_BOUNDARY
Get rid of CONFIG_LSF
block: make blk_softirq_init() static
block: use min_not_zero in blk_queue_stack_limits
block: add one-hit cache for disk partition lookup
cfq-iosched: remove limit of dispatch depth of max 4 times quantum
nbd: tell the block layer that it is not a rotational device
block: get rid of elevator_t typedef
aio: make the lookup_ioctx() lockless
bio: add support for inlining a number of bio_vecs inside the bio
bio: allow individual slabs in the bio_set
bio: move the slab pointer inside the bio_set
bio: only mempool back the largest bio_vec slab cache
block: don't use plugging on SSD devices
...
Linus Torvalds [Wed, 31 Dec 2008 00:20:19 +0000 (16:20 -0800)]
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, sparseirq: clean up Kconfig entry
x86: turn CONFIG_SPARSE_IRQ off by default
sparseirq: fix numa_migrate_irq_desc dependency and comments
sparseirq: add kernel-doc notation for new member in irq_desc, -v2
locking, irq: enclose irq_desc_lock_class in CONFIG_LOCKDEP
sparseirq, xen: make sure irq_desc is allocated for interrupts
sparseirq: fix !SMP building, #2
x86, sparseirq: move irq_desc according to smp_affinity, v7
proc: enclose desc variable of show_stat() in CONFIG_SPARSE_IRQ
sparse irqs: add irqnr.h to the user headers list
sparse irqs: handle !GENIRQ platforms
sparseirq: fix !SMP && !PCI_MSI && !HT_IRQ build
sparseirq: fix Alpha build failure
sparseirq: fix typo in !CONFIG_IO_APIC case
x86, MSI: pass irq_cfg and irq_desc
x86: MSI start irq numbering from nr_irqs_gsi
x86: use NR_IRQS_LEGACY
sparse irq_desc[] array: core kernel and x86 changes
genirq: record IRQ_LEVEL in irq_desc[]
irq.h: remove padding from irq_desc on 64bits
Linus Torvalds [Wed, 31 Dec 2008 00:16:21 +0000 (16:16 -0800)]
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
hrtimers: fix warning in kernel/hrtimer.c
x86: make sure we really have an hpet mapping before using it
x86: enable HPET on Fujitsu u9200
linux/timex.h: cleanup for userspace
posix-timers: simplify de_thread()->exit_itimers() path
posix-timers: check ->it_signal instead of ->it_pid to validate the timer
posix-timers: use "struct pid*" instead of "struct task_struct*"
nohz: suppress needless timer reprogramming
clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI
nohz: no softirq pending warnings for offline cpus
hrtimer: removing all ur callback modes, fix
hrtimer: removing all ur callback modes, fix hotplug
hrtimer: removing all ur callback modes
x86: correct link to HPET timer specification
rtc-cmos: export second NVRAM bank
Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c
manually.
Linus Torvalds [Wed, 31 Dec 2008 00:10:19 +0000 (16:10 -0800)]
Merge branch 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
stacktrace: provide save_stack_trace_tsk() weak alias
rcu: provide RCU options on non-preempt architectures too
printk: fix discarding message when recursion_bug
futex: clean up futex_(un)lock_pi fault handling
"Tree RCU": scalable classic RCU implementation
futex: rename field in futex_q to clarify single waiter semantics
x86/swiotlb: add default swiotlb_arch_range_needs_mapping
x86/swiotlb: add default phys<->bus conversion
x86: unify pci iommu setup and allow swiotlb to compile for 32 bit
x86: add swiotlb allocation functions
swiotlb: consolidate swiotlb info message printing
swiotlb: support bouncing of HighMem pages
swiotlb: factor out copy to/from device
swiotlb: add arch hook to force mapping
swiotlb: allow architectures to override phys<->bus<->phys conversions
swiotlb: add comment where we handle the overflow of a dma mask on 32 bit
rcu: fix rcutorture behavior during reboot
resources: skip sanity check of busy resources
swiotlb: move some definitions to header
swiotlb: allow architectures to override swiotlb pool allocation
...
Fix up trivial conflicts in
arch/x86/kernel/Makefile
arch/x86/mm/init_32.c
include/linux/hardirq.h
as per Ingo's suggestions.
Roland Dreier [Tue, 30 Dec 2008 23:30:26 +0000 (15:30 -0800)]
IB/mlx4: Fix reading SL field out of cqe->sl_vid
Commit f780a9f1 ("mlx4_core: Add ethernet fields to CQE struct")
introduced a bug in how wc->sl is set in mlx4_ib_poll_one() -- since
cqe->sl_vid is a big-endian value, the shift must be done after
converting to host endianness.
This bug was found using sparse endianness checking.
James Bottomley [Tue, 30 Dec 2008 15:44:29 +0000 (09:44 -0600)]
[SCSI] fcoe: fix configuration problems
fcoe selects libfc and requires SCSI and PCI (the SCSI requirement is
implicitly covered by an enclosing if). Fix them both up so they
cannot be configured in an invalid state: make LIBFC select
SCSI_FC_ATTRS and make FCOE depend on PCI and select LIBFC.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
James Bottomley [Tue, 30 Dec 2008 16:20:24 +0000 (10:20 -0600)]
[SCSI] cxgb3i: fix select/depend problem
cxgb3i requires the cxgb3 net driver, so it selects it. However,
cxgb3 has dependencies which the select cannot see. Fix this by
separating out the cxgb3 dependencies into a separate hidden config
option (CONFIG_CHELSIO_T3_DEPENDS) and make both cxgb3 and cxgb3i
depend on it.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Karen Xie <kxie@chelsio.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
James Bottomley [Mon, 29 Dec 2008 21:45:41 +0000 (15:45 -0600)]
[SCSI] fcoe: fix incorrect use of struct module
This structure may not be defined if CONFIG_MODULE=n, so never deref
it. Change uses of module->name to module_name(module) and corrects
some dyslexic printks and docbook comments.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
projects / linux-2.6-omap-h63xx.git / log