* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64]: Adjust kernel PC validation test in fault handler.
[SPARC64]: Loosen checks in exception table handling.
[SPARC64]: Fix section mismatch from kernel_map_range
[SPARC64]: Fix section mismatchs from dr_cpu_data
[SPARC]: Fix build in arch/sparc/kernel/led.c
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
ide: remove stale comments from ide-dma.c (take 2)
ide: remove ide-tape documentation from Documentation/ide.txt
qd65xx: remove commented out code
ide-tape: schedule driver for removal after 6 months
ide-disk: add missing printk() KERN_* levels
ide: fix sparse warning about shadowing 'flags' symbol
ide-cd: fix CD/DVD burning
ide-cd: fix 'ireason' handling for REQ_TYPE_ATA_PC requests
qd65xx: fix setup of QD6580 Control register
ide: skip probing port if "hdx=noprobe" was used for both devices on it
ide: remove redundant comment from ide_unregister()
hpt366: fix section mismatch warnings
ide-cd: Enable audio play quirk for Optiarc DVD RW AD-5200A drive
David Howells [Thu, 28 Feb 2008 13:29:43 +0000 (13:29 +0000)]
Fix hpet_(un)register_irq_handler() for emulation
Fix hpet_(un)register_irq_handler() for when CONFIG_HPET_EMULATE_RTC=n. They
are provided macros that substitute value 0, but if they are called as
functions and the return value isn't checked, the following warnings appear:
drivers/char/rtc.c: In function `rtc_init':
drivers/char/rtc.c:1063: warning: statement with no effect
drivers/char/rtc.c: In function `rtc_exit':
drivers/char/rtc.c:1157: warning: statement with no effect
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roland McGrath [Tue, 26 Feb 2008 21:20:58 +0000 (13:20 -0800)]
elfcore-compat fix uid/gid types
I overlooked the difference between __kernel_uid_t and uid_t when defining
struct compat_elf_prpsinfo. The result is a regression in 32-bit core
dumps on x86_64, where the NT_PRPSINFO note has the wrong size and layout.
This patch fixes it.
Faisal Latif [Thu, 21 Feb 2008 14:31:22 +0000 (08:31 -0600)]
RDMA/nes: Fix CRC endianness for RDMA connection establishment on big-endian
With commit ef19454b ("[LIB] crc32c: Keep intermediate crc state in
cpu order"), the behavior of crc32c changes on big-endian platforms.
Our algorithm expects the previous behavior; otherwise we have RDMA
connection establishment failure on big-endian platforms like powerpc.
Apply cpu_to_le32() to value returned by crc32c() to get the previous
behavior.
Glenn Streiff [Thu, 21 Feb 2008 14:17:54 +0000 (08:17 -0600)]
RDMA/nes: Fix use-after-free in nes_create_cq()
Just delete the debugging statement so we don't use cqp_request after
freeing it. Adrian Bunk flagged this use-after-free issue spotted by
the Coverity checker.
Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Sam Ravnborg [Tue, 26 Feb 2008 20:50:33 +0000 (21:50 +0100)]
hpt366: fix section mismatch warnings
hpt366: fix section mismatch warnings
Fix following warnings:
WARNING: o-sparc64/vmlinux.o(.data+0x195a38): Section mismatch in reference from the variable hpt37x_info.0 to the variable .devinit.data:hpt370
WARNING: o-sparc64/vmlinux.o(.data+0x195a40): Section mismatch in reference from the variable hpt37x_info.0 to the variable .devinit.data:hpt370a
WARNING: o-sparc64/vmlinux.o(.data+0x195a48): Section mismatch in reference from the variable hpt37x_info.0 to the variable .devinit.data:hpt372
WARNING: o-sparc64/vmlinux.o(.data+0x195a50): Section mismatch in reference from the variable hpt37x_info.0 to the variable .devinit.data:hpt372n
Replace a static array with a small switch resulting in
more readable code.
Mark the pci table __devinitconst.
A lot of variables are const but annotated __devinitdata.
Annotating them __devinitconst would cause a section type
conflict error when build for 64 bit powerpc.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Linus Torvalds [Tue, 26 Feb 2008 15:55:29 +0000 (07:55 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
[XFS] Undo bit ops cleanup mod due to regression on 32-bit powermac
[XFS] Undo bit ops cleanup mod due to regression on 32-bit powermac
Remove empty file fs/xfs/Makefile-linux-2.6.
Linus Torvalds [Tue, 26 Feb 2008 15:50:16 +0000 (07:50 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: add missing ext4_journal_stop()
ext4: ext4_find_next_zero_bit needs an aligned address on some arch
ext4: set EXT4_EXTENTS_FL only for directory and regular files
ext4: Don't mark filesystem error if fallocate fails
ext4: Fix BUG when writing to an unitialized extent
ext4: Don't use ext4_dec_count() if not needed
ext4: modify block allocation algorithm for the last group
ext4: Don't claim block from group which has corrupt bitmap
ext4: Get journal write access before modifying the extent tree
ext4: Fix memory and buffer head leak in callers to ext4_ext_find_extent()
ext4: Don't leave behind a half-created inode if ext4_mkdir() fails
ext4: Fix kernel BUG at fs/ext4/mballoc.c:910!
ext4: Fix locking hierarchy violation in ext4_fallocate()
Remove incorrect BKL comments in ext4
Linus Torvalds [Tue, 26 Feb 2008 15:49:36 +0000 (07:49 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
Revert "power_state: get rid of write-only variable in SATA"
make atapi_dmadir static
Linus Torvalds [Tue, 26 Feb 2008 15:49:15 +0000 (07:49 -0800)]
Merge branch 'v2.6.25-rc3-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep
* 'v2.6.25-rc3-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep:
Subject: lockdep: include all lock classes in all_lock_classes
lockdep: increase MAX_LOCK_DEPTH
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (24 commits)
x86: no robust/pi futex for real i386 CPUs
x86: fix boot failure on 486 due to TSC breakage
x86: fix build on non-C locales.
x86: make c_idle.work have a static address.
x86: don't save unreliable stack trace entries
x86: don't make swapper_pg_pmd global
x86: don't print a warning when MTRR are blank and running in KVM
x86: fix execve with -fstack-protect
x86: fix vsyscall wreckage
x86: rename KERNEL_TEXT_SIZE => KERNEL_IMAGE_SIZE
x86: fix spontaneous reboot with allyesconfig bzImage
x86: remove double-checking empty zero pages debug
x86: notsc is ignored on common configurations
x86/mtrr: fix kernel-doc missing notation
x86: handle BIOSes which terminate e820 with CF=1 and no SMAP
x86: add comments for NOPs
x86: don't use P6_NOPs if compiling with CONFIG_X86_GENERIC
x86: require family >= 6 if we are using P6 NOPs
x86: do not promote TM3x00/TM5x00 to i686-class
x86: hpet fix docbook comment
...
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
latencytop: change /proc task_struct access method
latencytop: fix memory leak on latency proc file
latencytop: fix kernel panic while reading latency proc file
sched: add declaration of sched_tail to sched.h
sched: fix signedness warnings in sched.c
sched: clean up __pick_last_entity() a bit
sched: remove duplicate code from sched_fair.c
sched: make early bootup sched_clock() use safer
Tejun Heo [Thu, 14 Feb 2008 01:32:07 +0000 (10:32 +0900)]
printk: fix possible printk overrun
printk recursion detection prepends message to printk_buf and offsets
printk_buf when actual message is printed but it forgets to trim buffer
length accordingly. This can result in overrun in extreme cases. Fix it.
> Diffing dmesg between git7 and git8 doesn't sched any light since
> git8 also removed the printouts of the x86 caps as they were being
> initialised and updated. I'm currently adding those printouts back
> in the hope of seeing where and when the caps get broken.
(The first two lines are printout loops from -git7 forward-ported
to -git8, the third line is the same printout loop added just after
the xor-with-cleared_cpu_caps[] loop.)
Here's how the breakage occurs:
1. arch/x86/kernel/tsc_32.c:tsc_init() sees !cpu_has_tsc,
so bails and calls setup_clear_cpu_cap(X86_FEATURE_TSC).
2. include/asm-x86/cpufeature.h:setup_clear_cpu_cap(bit) clears
the bit in boot_cpu_data and sets it in cleared_cpu_caps
3. arch/x86/kernel/cpu/common.c:identify_cpu() XORs all caps
in with cleared_cpu_caps
HOWEVER, at this point c->x86_capability correctly has TSC
Off, cleared_cpu_caps has TSC On, so the XOR incorrectly
sets TSC to On in c->x86_capability, with disastrous results.
The real bug is that clearing bits with XOR only works if the
bits are known to be 1 prior to the XOR, and that's not true here.
A simple fix is to convert the XOR to AND-NOT instead. The following
patch does that, and allows my 486 to boot 2.6.25-rc kernels again.
[ mingo@elte.hu: fixed a similar bug in setup_64.c as well. ]
The breakage was introduced via commit 7d851c8d3db0.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Glauber Costa [Fri, 22 Feb 2008 15:09:29 +0000 (12:09 -0300)]
x86: make c_idle.work have a static address.
Currently, c_idle is declared in the stack, and thus, have no static address.
Peter Zijlstra points out this simple solution, in which c_idle.work
is initializated separatedly. Note that the INIT_WORK macro has a static
declaration of a key inside.
Signed-off-by: Glauber Costa <gcosta@redhat.com> Acked-by: Peter Zijlstra <pzijlstr@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Vegard Nossum [Fri, 22 Feb 2008 18:23:58 +0000 (19:23 +0100)]
x86: don't save unreliable stack trace entries
Currently, there is no way for print_stack_trace() to determine whether
a given stack trace entry was deemed reliable or not, simply because
save_stack_trace() does not record this information. (Perhaps needless
to say, this makes the saved stack traces A LOT harder to read, and
probably with no other benefits, since debugging features that use
save_stack_trace() most likely also require frame pointers, etc.)
This patch reverts to the old behaviour of only recording the reliable trace
entries for saved stack traces.
Signed-off-by: Vegard Nossum <vegardno@ifi.uio.no> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Joerg Roedel [Thu, 21 Feb 2008 14:50:14 +0000 (15:50 +0100)]
x86: don't print a warning when MTRR are blank and running in KVM
Inside a KVM virtual machine the MTRRs are usually blank. This confuses Linux
and causes a warning message at boot. This patch removes that warning message
when running Linux as a KVM guest.
Ingo Molnar [Tue, 26 Feb 2008 11:55:57 +0000 (12:55 +0100)]
x86: fix execve with -fstack-protect
pointed out by pageexec@freemail.hu:
> what happens here is that gcc treats the argument area as owned by the
> callee, not the caller and is allowed to do certain tricks. for ssp it
> will make a copy of the struct passed by value into the local variable
> area and pass *its* address down, and it won't copy it back into the
> original instance stored in the argument area.
>
> so once sys_execve returns, the pt_regs passed by value hasn't at all
> changed and its default content will cause a nice double fault (FWIW,
> this part took me the longest to debug, being down with cold didn't
> help it either ;).
To fix this we pass in pt_regs by pointer.
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Wed, 20 Feb 2008 22:57:30 +0000 (23:57 +0100)]
x86: fix vsyscall wreckage
based on a report from Arne Georg Gleditsch about user-space apps
misbehaving after toggling /proc/sys/kernel/vsyscall64, a review
of the code revealed that the "NOP patching" done there is
fundamentally unsafe for a number of reasons:
1) the patching code runs without synchronizing other CPUs
2) it inserts NOPs even if there is no clock source which provides vread
3) when the clock source changes to one without vread we run in
exactly the same problem as in #2
4) if nobody toggles the proc entry from 1 to 0 and to 1 again, then
the syscall is not patched out
as a result it is possible to break user-space via this patching.
The only safe thing for now is to remove the patching.
This code was broken since v2.6.21.
Reported-by: Arne Georg Gleditsch <arne.gleditsch@dolphinics.no> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 21 Feb 2008 12:39:30 +0000 (13:39 +0100)]
x86: rename KERNEL_TEXT_SIZE => KERNEL_IMAGE_SIZE
The KERNEL_TEXT_SIZE constant was mis-named, as we not only map the kernel
text but data, bss and init sections as well.
That name led me on the wrong path with the KERNEL_TEXT_SIZE regression,
because i knew how big of _text_ my images have and i knew about the 40 MB
"text" limit so i wrongly thought to be on the safe side of the 40 MB limit
with my 29 MB of text, while the total image size was slightly above 40 MB.
40 MB is 42572719 bytes, so my vmlinux was just 1.5% above this limit :-/
So it happily crashed right in head_64.S, which - as we all know - is
the most debuggable code in the whole architecture ;-)
So increase the limit to allow an up to 128MB kernel image to be mapped.
(should anyone be that crazy or lazy)
We have a full 4K of pagetable (level2_kernel_pgt) allocated for these
mappings already, so there's no RAM overhead and the limit was rather
pointless and arbitrary.
H. Peter Anvin [Wed, 13 Feb 2008 19:16:46 +0000 (11:16 -0800)]
x86: handle BIOSes which terminate e820 with CF=1 and no SMAP
The proper way to terminate the e820 chain is with %ebx == 0 on the
last legitimate memory block. However, several BIOSes don't do that
and instead return error (CF = 1) when trying to read off the end of
the list. For this error return, %eax doesn't necessarily return the
SMAP signature -- correctly so, since %ah should contain an error code
in this case.
To deal with some particularly broken BIOSes, we clear the entire e820
chain if the SMAP signature is missing in the middle, indicating a
plain insane e820 implementation. However, we need to make the test
for CF = 1 before the SMAP check.
This fixes at least one HP laptop (nc6400) for which none of the
memory-probing methods (e820, e801, 88) functioned fully according to
spec.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
H. Peter Anvin [Thu, 14 Feb 2008 22:56:45 +0000 (14:56 -0800)]
x86: don't use P6_NOPs if compiling with CONFIG_X86_GENERIC
P6_NOPs are definitely not supported on some VIA CPUs, and possibly
(unverified) on AMD K7s. It is also the only thing that prevents a
686 kernel from running on Transmeta TM3x00/5x00 (Crusoe) series.
The performance benefit over generic NOPs is very small, so when
building for generic consumption, avoid using them.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
H. Peter Anvin [Thu, 14 Feb 2008 22:51:00 +0000 (14:51 -0800)]
x86: do not promote TM3x00/TM5x00 to i686-class
We have been promoting Transmeta TM3x00/TM5x00 chips to i686-class
based on the notion that they contain all the user-space visible
features of an i686-class chip. However, this is not actually true:
they lack the EA-taking long NOPs (0F 1F /0). Since this is a
userspace-visible incompatibility, downgrade these CPUs to the
manufacturer-defined i586 level.
Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
x86/early_ioremap: don't assume we're using swapper_pg_dir
At the early stages of boot, before the kernel pagetable has been
fully initialized, a Xen kernel will still be running off the
Xen-provided pagetables rather than swapper_pg_dir[]. Therefore,
readback cr3 to determine the base of the pagetable rather than
assuming swapper_pg_dir[].
static inline pmd_t * __init early_ioremap_pmd(unsigned long addr)
{
- pgd_t *pgd = &swapper_pg_dir[pgd_index(addr)];
+ /* Don't assume we're using swapper_pg_dir at this point */
+ pgd_t *base = __va(read_cr3());
+ pgd_t *pgd = &base[pgd_index(addr)];
pud_t *pud = pud_offset(pgd, addr);
pmd_t *pmd = pmd_offset(pud, addr);
Trying to analyze the problem, it seems on the guest side of lguest,
%cr3 has a different value from &swapper_pg-dir (which
is AFAIK fine on a pravirt guest):
Putting some debugging messages in early_ioremap_pmd:
Harvey Harrison [Wed, 13 Feb 2008 21:14:35 +0000 (13:14 -0800)]
lguest: include function prototypes
Added a declaration to asm-x86/lguest.h and moved the extern arrays there
as well. As an alternative to including asm/lguest.h directly, an
include could be put in linux/lguest.h
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: "rusty@rustcorp.com.au" <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Chien Tung [Thu, 21 Feb 2008 13:51:17 +0000 (07:51 -0600)]
RDMA/nes: Resurrect error path dead code
Adrian Bunk pointed out that a Coverity scan found some apparently
dead code in nes_verbs.c that really shouldn't have been dead.
The function nes_create_cq() was missing the assignment
err = 1;
just prior to an iteration that conditionally set err = 0 if a PBL was
found for a given virtual CQ. I also noticed we should have been
returning -EFAULT on a couple related error paths.
Bryan Rosenburg [Wed, 20 Feb 2008 23:31:48 +0000 (17:31 -0600)]
RDMA/cxgb3: Fix shift calc in build_phys_page_list() for 1-entry page lists
A single entry (addr 0x10001000, size 0x2000) will get converted to
page address 0x10000000 with a page size of 0x4000. The code as it
stands doesn't address the single buffer case, but in fact it allows
the subsequent single-buffer special case to be eliminated entirely.
Because the mask now includes the (page adjusted) starting and ending
addresses, the general case works for the single buffer case as well.
Signed-off-by: Bryan Rosenburg <rosnbrg@us.ibm.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Dale Farnsworth [Mon, 25 Feb 2008 22:03:02 +0000 (23:03 +0100)]
Subject: lockdep: include all lock classes in all_lock_classes
Add each lock class to the all_lock_classes list when it is
first registered.
Previously, lock classes were added to all_lock_classes when
the lock class was first used. Since one of the uses of the
list is to find unused locks, this didn't work well.
Peter Zijlstra [Mon, 25 Feb 2008 22:02:48 +0000 (23:02 +0100)]
lockdep: increase MAX_LOCK_DEPTH
Some code paths exceed the current max lock depth (XFS), so increase
this limit a bit. I looked at making this a dynamic allocated array,
but we should not advocate insane lock depths, so stay with this as
long as it works...
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change getting task_struct by get_proc_task() at read or write time,
and returns -ESRCH if get_proc_task() returns NULL.
This is same behavior as other /proc files.
latencytop: fix kernel panic while reading latency proc file
Reading /proc/<pid>/latency or /proc/<pid>/task/<tid>/latency could cause
NULL pointer dereference.
In lstats_open(), get_proc_task() can return NULL, in which case the kernel
will oops at lstats_show_proc() because m->private is NULL.
When get_proc_task() returns NULL, the kernel should return -ENOENT.
This can be reproduced by the following script.
while :
do
date
bash -c 'ls > ls.$$' &
pid=$!
cat /proc/$pid/latency &
cat /proc/$pid/latency &
cat /proc/$pid/latency &
cat /proc/$pid/latency
done
Harvey Harrison [Fri, 15 Feb 2008 17:56:36 +0000 (09:56 -0800)]
sched: fix signedness warnings in sched.c
Unsigned long values are always assigned to switch_count,
make it unsigned long.
kernel/sched.c:3897:15: warning: incorrect type in assignment (different signedness)
kernel/sched.c:3897:15: expected long *switch_count
kernel/sched.c:3897:15: got unsigned long *<noident>
kernel/sched.c:3921:16: warning: incorrect type in assignment (different signedness)
kernel/sched.c:3921:16: expected long *switch_count
kernel/sched.c:3921:16: got unsigned long *<noident>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 13 Feb 2008 13:02:36 +0000 (14:02 +0100)]
sched: make early bootup sched_clock() use safer
do not call sched_clock() too early. Not only might rq->idle
not be set up - but pure per-cpu data might not be accessible
either.
this solves an ia64 early bootup hang with CONFIG_PRINTK_TIME=y.
Tested-by: Tony Luck <tony.luck@gmail.com> Acked-by: Tony Luck <tony.luck@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Sam Ravnborg [Mon, 25 Feb 2008 03:49:52 +0000 (19:49 -0800)]
[SPARC64]: Fix section mismatch from kernel_map_range
Fix following warnings:
WARNING: vmlinux.o(.text+0x4f980): Section mismatch in reference from the function kernel_map_range() to the function .init.text:__alloc_bootmem()
WARNING: vmlinux.o(.text+0x4f9cc): Section mismatch in reference from the function kernel_map_range() to the function .init.text:__alloc_bootmem()
alloc_bootmem() is only used during early init and for any subsequent
call to kernel_map_range() the program logic avoid the call.
So annotate kernel_map_range() with __ref to tell modpost to
ignore the reference to a __init function.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Sam Ravnborg [Mon, 25 Feb 2008 03:47:51 +0000 (19:47 -0800)]
[SPARC64]: Fix section mismatchs from dr_cpu_data
Fix following warnings:
WARNING: vmlinux.o(.text+0x4b258): Section mismatch in reference from the function dr_cpu_data() to the function .devinit.text:mdesc_fill_in_cpu_data()
WARNING: vmlinux.o(.text+0x4b290): Section mismatch in reference from the function dr_cpu_data() to the function .cpuinit.text:cpu_up()
mdesc_fill_in_cpu_data() is only used during early init and for
cpu hotplug so the __cpuinit annotation is the correct choice.
We have the call chain:
dr_cpu_data() => dr_cpu_configure() => mdesc_fill_in_cpu_data()
dr_cpu_data() is used only during early init and for cpu
hotplug. So annotating them all __cpuinit solves the
section mismatch and should be correct.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 25 Feb 2008 02:45:09 +0000 (18:45 -0800)]
[SPARC]: Fix build in arch/sparc/kernel/led.c
CC [M] arch/sparc/kernel/led.o
arch/sparc/kernel/led.c: In function 'led_blink':
arch/sparc/kernel/led.c:35: error: invalid use of undefined type 'struct
timer_list'
arch/sparc/kernel/led.c:35: error: 'jiffies' undeclared (first use in
this function)
arch/sparc/kernel/led.c:35: error: (Each undeclared identifier is
reported only once
arch/sparc/kernel/led.c:35: error: for each function it appears in.)
arch/sparc/kernel/led.c:36: error: 'avenrun' undeclared (first use in
this function)
arch/sparc/kernel/led.c:36: error: 'FSHIFT' undeclared (first use in
this function)
arch/sparc/kernel/led.c:36: error: 'HZ' undeclared (first use in this
function)
arch/sparc/kernel/led.c:37: error: invalid use of undefined type 'struct
timer_list'
arch/sparc/kernel/led.c:39: error: invalid use of undefined type 'struct
timer_list'
arch/sparc/kernel/led.c:40: error: invalid use of undefined type 'struct
timer_list'
arch/sparc/kernel/led.c:42: error: implicit declaration of function
'add_timer'
arch/sparc/kernel/led.c: In function 'led_write_proc':
arch/sparc/kernel/led.c:70: error: implicit declaration of function
'copy_from_user'
arch/sparc/kernel/led.c:84: error: implicit declaration of function
'del_timer_sync'
arch/sparc/kernel/led.c: In function 'led_init':
arch/sparc/kernel/led.c:109: error: implicit declaration of function
'init_timer'
arch/sparc/kernel/led.c:110: error: invalid use of undefined type
'struct timer_list'
make[1]: *** [arch/sparc/kernel/led.o] Error 1
Based upon original patch by Robert Reif.
Signed-off-by: David S. Miller <davem@davemloft.net>
David Brownell [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
i2c: Make i2c_register_board_info() a NOP when CONFIG_I2C_BOARDINFO=n
Don't require platform code to be #ifdeffed according to whether
I2C is enabled or not ... if it's not enabled, let GCC compile out
all I2C device declarations. (Issue noted on an NSLU2 build that
didn't configure I2C.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Christian Krafft [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
i2c-pca-isa: Add access check to legacy ioports
When probing i2c-pca-isa writes to legacy ioports, which crashes the kernel
if there is no device at that port.
This patch adds a check_legacy_ioport call, so probe fails gracefully
and thus prevents the oops.
Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Wolfram Sang [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
i2c-pxa: Misc fixes
While working on the PCA9564-platform driver, I sometimes had a glimpse at the
pxa-driver. I found some suspicious places, and this patch contains my
suggestions. Note: They are not tested, due to no hardware.
[JD: Some more fixes.]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Eric Miao <ymiao3@marvell.com>
Jean Delvare [Sun, 24 Feb 2008 19:03:41 +0000 (20:03 +0100)]
ARM: OMAP: Release i2c_adapter after use (Siemens SX1)
Each call to i2c_get_adapter() must be followed by a call to
i2c_put_adapter() to release the grabbed reference. Otherwise the
reference count grows forever and the adapter can never be
unregistered.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Vladimir Ananiev <vovan888@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com>
Linus Torvalds [Sun, 24 Feb 2008 05:40:32 +0000 (21:40 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata-core: fix kernel-doc warning
sata_fsl: fix build with ATA_VERBOSE_DEBUG
[libata] ahci: AMD SB700/SB800 SATA support 64bit DMA
libata-pmp: clear hob for pmp register accesses
libata: automatically use DMADIR if drive/bridge requires it
power_state: get rid of write-only variable in SATA
pata_atiixp: Use 255 sector limit
Anton Vorontsov [Fri, 22 Feb 2008 16:54:25 +0000 (19:54 +0300)]
sata_fsl: fix build with ATA_VERBOSE_DEBUG
This patch fixes build and few warnings when ATA_VERBOSE_DEBUG
is defined:
CC drivers/ata/sata_fsl.o
drivers/ata/sata_fsl.c: In function ‘sata_fsl_fill_sg’:
drivers/ata/sata_fsl.c:338: warning: format ‘%x’ expects type ‘unsigned int’, but argument 3 has type ‘void *’
drivers/ata/sata_fsl.c:338: warning: format ‘%x’ expects type ‘unsigned int’, but argument 4 has type ‘struct prde *’
drivers/ata/sata_fsl.c: In function ‘sata_fsl_qc_issue’:
drivers/ata/sata_fsl.c:459: error: ‘csr_base’ undeclared (first use in this function)
drivers/ata/sata_fsl.c:459: error: (Each undeclared identifier is reported only once
drivers/ata/sata_fsl.c:459: error: for each function it appears in.)
drivers/ata/sata_fsl.c: In function ‘sata_fsl_freeze’:
drivers/ata/sata_fsl.c:525: error: ‘csr_base’ undeclared (first use in this function)
make[2]: *** [drivers/ata/sata_fsl.o] Error 1
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Shane Huang [Fri, 22 Feb 2008 13:00:31 +0000 (05:00 -0800)]
[libata] ahci: AMD SB700/SB800 SATA support 64bit DMA
SB700 SATA controller can support 64 bit DMA, the previous commit badc2341579511a247f5993865aa68379e283c5c was added with
careless reference to SB600, which should be modified by this patch.
Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Mark Lord [Thu, 21 Feb 2008 20:52:25 +0000 (15:52 -0500)]
libata-pmp: clear hob for pmp register accesses
>> Mark Lord wrote:
>>> Tejun, I've added PMP to sata_mv, and am now trying to get it
>>> to work with a Marvell PM attached.
>>>
>>> And the behaviour I see is very bizarre.
>>>
>>> After hard+soft resets, the PM signature is found,
>>> and libata interrogates the PM registers.
>>>
>>> It successfully reads register 0, and then register 1.
>>> But all subsequent registers read out (incorrectly) as zeros.
...
This behavior has been confirmed by Marvell with a SATA analyzer.
The Marvell port-multiplier apparently likes to see clean HOB
information when accessing PMP registers.
Since sata_mv uses PIO shadow register access, this doesn't happen
automatically, as it might in a more purely FIS-based driver (eg. ahci).
One way to fix this is to flag these commands with ATA_TFLAG_LBA48,
forcing libata to write out the HOB fields with known (zero) values.
Signed-off-by: Saeed Bishara <saeed@marvell.com> Acked-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Thu, 21 Feb 2008 04:25:50 +0000 (13:25 +0900)]
libata: automatically use DMADIR if drive/bridge requires it
Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir.
That's nice, but most SATA devices which need it will tell us about it
in their IDENTIFY PACKET response, as bit-15 of word-62 of the
returned data (as per ATA7, ATA8 specifications).
So for those which specify it, we should automatically use the DMADIR bit.
Otherwise, disc writing will fail by default on many SATA-ATAPI drives.
This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it
if atapi_dmadir is set or identify data indicates DMADIR is necessary.
atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting
DMADIR.
Original patch is from Mark Lord.
Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
[NETFILTER]: fix ebtable targets return
[IP_TUNNEL]: Don't limit the number of tunnels with generic name explicitly.
[NET]: Restore sanity wrt. print_mac().
[NEIGH]: Fix race between neighbor lookup and table's hash_rnd update.
[RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK
tg3: ethtool phys_id default
[BNX2]: Update version to 1.7.4.
[BNX2]: Disable parallel detect on an HP blade.
[BNX2]: More 5706S link down workaround.
ssb: Fix support for PCI devices behind a SSB->PCI bridge
zd1211rw: fix sparse warnings
rtl818x: fix sparse warnings
ssb: Fix pcicore cardbus mode
ssb: Make the GPIO API reentrancy safe
ssb: Fix the GPIO API
ssb: Fix watchdog access for devices without a chipcommon
ssb: Fix serial console on new bcm47xx devices
ath5k: Fix build warnings on some 64-bit platforms.
WDEV, ath5k, don't return int from bool function
WDEV: ath5k, fix lock imbalance
...
CC [M] drivers/usb/host/u132-hcd.o
drivers/usb/host/u132-hcd.c: In function ‘u132_suspend’:
drivers/usb/host/u132-hcd.c:3224: error: expected expression before ‘int’
drivers/usb/host/u132-hcd.c:3225: error: ‘ports’ undeclared (first use in this function)
...
projects / linux-2.6-omap-h63xx.git / log