Ron Rindjunsky [Mon, 28 Jan 2008 12:07:21 +0000 (14:07 +0200)]
mac80211: A-MPDU Tx change tx_status to support Block Ack data
This patch adds fields to ieee80211_tx_status in order to allow block ack
information exchange between low-level driver,mac80211 and rate scaling
module.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ron Rindjunsky [Mon, 28 Jan 2008 12:07:16 +0000 (14:07 +0200)]
mac80211: A-MPDU Tx add MLME structures
This patch adds the needed structures to describe the Tx aggregation MLME
per STA
new:
- struct tid_ampdu_tx: TID aggregation information (Tx)
changed:
- struct sta_ampdu_mlme: Tx aggregation information per TID and
dialog token creator were added
- struct sta_info: tid_to_tx_q added for tid<->tx queue mapping
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ron Rindjunsky [Mon, 28 Jan 2008 12:07:15 +0000 (14:07 +0200)]
mac80211: A-MPDU Tx add session's and low level driver's API
This patch adds the API for 3 stages in A-MPDU Tx session flow:
- request mac80211 to start/stop A-MPDU Tx session for specific TID. such a
request should be issued by a load aware element, either mac80211 itself
or external element.
- requests by mac80211 to low-level driver to start/stop Tx aggregation.
notice that low level driver responds now with Starting Sequence Number.
- async feedback by low-level to mac80211 to inform that HW is ready for
next A-MPDU Tx state.
Changes in API to Rx A-MPDU were also made, reflected in iwlwifi changes as
well.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Mon, 28 Jan 2008 16:11:43 +0000 (17:11 +0100)]
mac80211: allow sending multicast frames through virtual ports
When reworking the port access control code, I forgot multicast frames
and those are now always rejected because the destination station is
not known. This changes the code to allow through multicast frames and
also avoid the sta hash lookup (which is bound to fail) for them.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Sun, 27 Jan 2008 14:18:22 +0000 (16:18 +0200)]
mac80211: set assoc flag to bss_conf
Only BSS_CHANGED_ASSOC was set in the 'changed' bitmask. Assignment to
bss_conf.assoc was absent.
This patch assign value to bss_conf.assoc according the association state.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Juha-Matti Tapio [Fri, 29 Feb 2008 04:55:46 +0000 (20:55 -0800)]
[IPV6]: Fix source address selection for ORCHID addresses
Skip the prefix length matching in source address selection for
orchid -> non-orchid addresses.
Overlay Routable Cryptographic Hash IDentifiers (RFC 4843,
2001:10::/28) are currenty not globally reachable. Without this
check a host with an ORCHID address can end up preferring those over
regular addresses when talking to other regular hosts in the 2001::/16
range thus breaking non-orchid connections.
Signed-off-by: Juha-Matti Tapio <jmtapio@verkkotelakka.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Juha-Matti Tapio [Fri, 29 Feb 2008 04:55:02 +0000 (20:55 -0800)]
[IPV6]: Add ORCHID prefix to address label table
Add a new label for Overlay Routable Cryptographic Hash Identifiers
(RFC 4843) prefix 2001:10::/28 to help proper source address
selection.
ORCHID addresses are used by for example Host Identity Protocol. They are
global and routable, but they currently need support from both endpoints
and therefore mixing regular and ORCHID addresses for source and
destination is a bad idea in general case.
Signed-off-by: Juha-Matti Tapio <jmtapio@verkkotelakka.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Fri, 29 Feb 2008 04:48:01 +0000 (20:48 -0800)]
[NETNS]: Register neighbour table parameters in the correct namespace.
neigh_sysctl_register should register sysctl entries inside correct namespace
to avoid naming conflict. Typical example is a loopback. Entries for it
present in all namespaces.
Required to make inetdev_event working.
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Fri, 29 Feb 2008 04:45:00 +0000 (20:45 -0800)]
[IPV4]: Remove check for ifa->ifa_dev != NULL.
This is a callback registered to inet address notifier chain.
The check is useless as:
- ifa->ifa_dev is always != NULL
- similar checks are abscent in all other notifiers.
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Fri, 29 Feb 2008 04:44:27 +0000 (20:44 -0800)]
[IPV4]: Remove ifa != NULL check.
This is a callback registered to inet address notifier chain.
The check is useless as:
- ifa is always != NULL
- similar checks are abscent in all other notifiers.
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Wed, 27 Feb 2008 21:04:52 +0000 (16:04 -0500)]
[SCTP]: Update AUTH structures to match declarations in draft-16.
The new SCTP socket api (draft 16) updates the AUTH API structures.
We never exported these since we knew they would change.
Update the rest to match the draft.
Neil Horman [Fri, 15 Feb 2008 14:53:59 +0000 (09:53 -0500)]
[SCTP]: Clean up naming conventions of sctp protocol/address family registration
I noticed while looking into some odd behavior in sctp, that the variable
name sctp_pf_inet6_specific was used twice to represent two different
pieces of data (its both a structure name and a pointer to that type of
structure), which is confusing to say the least, and potentially dangerous
depending on the variable scope. This patch cleans that up, and makes the
protocol and address family registration names in SCTP more regular,
increasing readability.
Herbert Xu [Thu, 28 Feb 2008 19:23:17 +0000 (11:23 -0800)]
[IPCOMP]: Disable BH on output when using shared tfm
Because we use shared tfm objects in order to conserve memory,
(each tfm requires 128K of vmalloc memory), BH needs to be turned
off on output as that can occur in process context.
Previously this was done implicitly by the xfrm output code.
That was lost when it became lockless. So we need to add the
BH disabling to IPComp directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Zaytsev [Sat, 23 Feb 2008 10:33:07 +0000 (13:33 +0300)]
Don't build bcm43xx if SSB is static and b43 PCI-SSB bridge is enabled.
This may happen e.g. when the ssb is statically enables by the b44 driver,
and the b43 pci-ssb bridge is enbled by the b43/b43legacy drivers, or the
b43/b43legacy drivers are built statically.
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Alexey Zaytsev [Sat, 23 Feb 2008 09:59:26 +0000 (12:59 +0300)]
Use a separate config option for the b43 pci to ssb bridge.
The bridge code was unnecessary enabled by the b44
driver, but it prevents the bcm43xx driver from
being loaded, as the bridge claims the same pci ids.
Now we enable the birdge only if the b43{legacy}
drivers are selected.
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Roland Dreier [Tue, 26 Feb 2008 14:26:56 +0000 (15:26 +0100)]
libertas: Remove unused exports
The libertas driver exports a number of symbols with no in-tree users;
remove these unused exports. lbs_reset_device() is completely unused, with
no callers at all, so remove the function completely.
A couple of these unused exported symbols are static, which causes the
following build error on ia64 with gcc 4.2.3:
drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict
drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict
Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Mon, 25 Feb 2008 22:15:13 +0000 (23:15 +0100)]
rt2x00: Fix rt2x00lib_reset_link_tuner()
rt2x00lib_reset_link_tuner() can be called from within
the link tuner itself. This means that it should
_not_ call rt2x00lib_stop_link_tuner() since that will
cause the thread to hang.
Reorder the things that should be done during a
link tuner reset and during a link tuner start.
Also make antenna tuning the last step of the link
tuner since it could possibly reset some statistical
information which we need for average calculation.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Mon, 25 Feb 2008 22:15:05 +0000 (23:15 +0100)]
rt2x00: Add link tuner safe RX toggle states
This adds 2 new states which both are used to toggle
the RX. These new states are required for usage
inside the link tuner thread, because the normal
RX toggling will stop the link tuner thread.
While it is possible that the link tuner thread itself
is the caller of the RX toggle (when using software
antenna diversity).
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Mon, 25 Feb 2008 22:15:01 +0000 (23:15 +0100)]
rt2x00: Fix antenna diversity
Fix 2 issues in antenna diversity selection.
1) the following statement will always return true.
if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5)
It is cleaner to check if the absolute value is smaller then 5.
2) Only enable software diversity when default antenna setup
indicates support for it. Don't select it when the hardware
does not indicate support for it...
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| CC drivers/net/ps3_gelic_wireless.o
| /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c: In function 'gelic_wl_setup_netdev_ops':
| /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2660: error: 'struct net_device' has no member named 'wireless_data'
| /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2661: error: 'struct net_device' has no member named 'wireless_handlers'
| make[3]: *** [drivers/net/ps3_gelic_wireless.o] Error 1
| make[2]: *** [drivers/net] Error 2
| make[1]: *** [drivers] Error 2
| make[1]: *** Waiting for unfinished jobs....
| make: *** [sub-make] Error 2
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Acked-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Masakazu Mokuno [Fri, 22 Feb 2008 07:45:26 +0000 (16:45 +0900)]
PS3: gelic: Link the wireless net_device structure to the corresponding device structure
Link the net_device structure of the wireless part to the
corresponding device structure.
Without this, the sysfs node for this net_device would not have
'device' link.
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 20 Feb 2008 10:47:45 +0000 (11:47 +0100)]
rndis_wlan: fix sparse warnings
It is obviously wrong to use an enum in a little endian struct,
and those other enums should be declared differently.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Patrick McHardy [Wed, 27 Feb 2008 20:21:18 +0000 (12:21 -0800)]
[NETFILTER]: Fix NF_QUEUE_NR() parenthesis
Properly add parens around the macro argument. This is not needed by
the kernel but the macro is exported to userspace, so it shouldn't
make any assumptions.
Also use NF_VERDICT_BITS instead of NF_VERDICT_QBTIS for the left-shift
since thats whats logically correct.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Wed, 27 Feb 2008 20:07:47 +0000 (12:07 -0800)]
[NETFILTER]: nf_conntrack: fix smp_processor_id() in preemptible code warning
Since we're using RCU for the conntrack hash now, we need to avoid
getting preempted or interrupted by BHs while changing the stats.
Fixes warning reported by Tilman Schmidt <tilman@imap.cc> when using
preemptible RCU:
[ 48.180297] BUG: using smp_processor_id() in preemptible [00000000] code: ntpdate/3562
[ 48.180297] caller is __nf_conntrack_find+0x9b/0xeb [nf_conntrack]
[ 48.180297] Pid: 3562, comm: ntpdate Not tainted 2.6.25-rc2-mm1-testing #1
[ 48.180297] [<c02015b9>] debug_smp_processor_id+0x99/0xb0
[ 48.180297] [<fac643a7>] __nf_conntrack_find+0x9b/0xeb [nf_conntrack]
Tested-by: Tilman Schmidt <tilman@imap.cc> Tested-by: Christian Casteyde <casteyde.christian@free.fr> [Bugzilla #10097] Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Wed, 27 Feb 2008 07:51:04 +0000 (23:51 -0800)]
[INET]: Don't create tunnels with '%' in name.
Four tunnel drivers (ip_gre, ipip, ip6_tunnel and sit) can receive a
pre-defined name for a device from the userspace. Since these drivers
call the register_netdevice() (rtnl_lock, is held), which does _not_
generate the device's name, this name may contain a '%' character.
Not sure how bad is this to have a device with a '%' in its name, but
all the other places either use the register_netdev(), which call the
dev_alloc_name(), or explicitly call the dev_alloc_name() before
registering, i.e. do not allow for such names.
This had to be prior to the commit 34cc7b, but I forgot to number the
patches and this one got lost, sorry.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 27 Feb 2008 06:20:44 +0000 (22:20 -0800)]
[AF_KEY]: Fix oops by converting to proc_net_*().
To make sure the procfs visibility occurs after the ->proc_fs ops are
setup, use proc_net_fops_create() and proc_net_remove().
This also fixes an OOPS after module unload in that the name string
for remove was wrong, so it wouldn't actually be removed. That bug
was introduced by commit 61145aa1a12401ac71bcc450a58c773dd6e2bfb9
("[KEY]: Clean up proc files creation a bit.")
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjorn Mork [Wed, 27 Feb 2008 02:17:53 +0000 (18:17 -0800)]
[IPV4]: Reset scope when changing address
This bug did bite at least one user, who did have to resort to rebooting
the system after an "ifconfig eth0 127.0.0.1" typo.
Deleting the address and adding a new is a less intrusive workaround.
But I still beleive this is a bug that should be fixed. Some way or
another.
Another possibility would be to remove the scope mangling based on
address. This will always be incomplete (are 127/8 the only address
space with host scope requirements?)
We set the scope to RT_SCOPE_HOST if an IPv4 interface is configured
with a loopback address (127/8). The scope is never reset, and will
remain set to RT_SCOPE_HOST after changing the address. This patch
resets the scope if the address is changed again, to restore normal
functionality.
Signed-off-by: Bjorn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Thery [Wed, 27 Feb 2008 02:10:03 +0000 (18:10 -0800)]
[IPV6]: Add missing initializations of the new nl_info.nl_net field
Add some more missing initializations of the new nl_info.nl_net field
in IPv6 stack. This field will be used when network namespaces are
fully supported.
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Wed, 27 Feb 2008 01:52:05 +0000 (17:52 -0800)]
[MACVLAN]: Update Kconfig to refer to iproute
Since the macvlan release I had at least 5 users asking how to configure
it since the old userspace tool doesn't work with the version in the
kernel. Add a pointer to the Kconfig help.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Harvey Harrison [Mon, 25 Feb 2008 02:38:31 +0000 (18:38 -0800)]
tipc: fix integer as NULL pointer sparse warnings in tipc
net/tipc/cluster.c:145:2: warning: Using plain integer as NULL pointer
net/tipc/link.c:3254:36: warning: Using plain integer as NULL pointer
net/tipc/ref.c:151:15: warning: Using plain integer as NULL pointer
net/tipc/zone.c:85:2: warning: Using plain integer as NULL pointer
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Brownell [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
i2c: Make i2c_register_board_info() a NOP when CONFIG_I2C_BOARDINFO=n
Don't require platform code to be #ifdeffed according to whether
I2C is enabled or not ... if it's not enabled, let GCC compile out
all I2C device declarations. (Issue noted on an NSLU2 build that
didn't configure I2C.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Christian Krafft [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
i2c-pca-isa: Add access check to legacy ioports
When probing i2c-pca-isa writes to legacy ioports, which crashes the kernel
if there is no device at that port.
This patch adds a check_legacy_ioport call, so probe fails gracefully
and thus prevents the oops.
Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Wolfram Sang [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
i2c-pxa: Misc fixes
While working on the PCA9564-platform driver, I sometimes had a glimpse at the
pxa-driver. I found some suspicious places, and this patch contains my
suggestions. Note: They are not tested, due to no hardware.
[JD: Some more fixes.]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Eric Miao <ymiao3@marvell.com>
Jean Delvare [Sun, 24 Feb 2008 19:03:41 +0000 (20:03 +0100)]
ARM: OMAP: Release i2c_adapter after use (Siemens SX1)
Each call to i2c_get_adapter() must be followed by a call to
i2c_put_adapter() to release the grabbed reference. Otherwise the
reference count grows forever and the adapter can never be
unregistered.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Vladimir Ananiev <vovan888@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com>
projects / linux-2.6-omap-h63xx.git / log