Herbert Xu [Mon, 12 Jan 2009 00:06:03 +0000 (00:06 +0000)]
netfilter 03/09: bridge: Disable PPPOE/VLAN processing by default
The PPPOE/VLAN processing code in the bridge netfilter is broken
by design. The VLAN tag and the PPPOE session ID are an integral
part of the packet flow information, yet they're completely
ignored by the bridge netfilter. This is potentially a security
hole as it treats all VLANs and PPPOE sessions as the same.
What's more, it's actually broken for PPPOE as the bridge netfilter
tries to trim the packets to the IP length without adjusting the
PPPOE header (and adjusting the PPPOE header isn't much better
since the PPPOE peer may require the padding to be present).
Therefore we should disable this by default.
It does mean that people relying on this feature may lose networking
depending on how their bridge netfilter rules are configured.
However, IMHO the problems this code causes are serious enough to
warrant this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Mon, 12 Jan 2009 00:06:02 +0000 (00:06 +0000)]
netfilter 02/09: bridge: Fix handling of non-IP packets in FORWARD/POST_ROUTING
Currently the bridge FORWARD/POST_ROUTING chains treats all
non-IPv4 packets as IPv6. This packet fixes that by returning
NF_ACCEPT on non-IP packets instead, just as is done in PRE_ROUTING.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Arjan van de Ven [Sun, 11 Jan 2009 15:35:01 +0000 (15:35 +0000)]
async: fix __lowest_in_progress()
At 37000 feet somewhere near Greenland I woke up from a half-sleep with the
realisation that __lowest_in_progress() is buggy. After landing I checked
and there were indeed 2 problems with it; this patch fixes both:
* The order of the list checks was wrong
* The locking was not correct.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arjan van de Ven [Sun, 11 Jan 2009 15:03:23 +0000 (15:03 +0000)]
script: improve markup_oops.pl to also decode oopses in modules
There has been some light flamewar on lkml about decoding oopses
in modules (as part of the crashdump flamewar).
Now this isn't rocket science, just the markup_oops.pl script
cheaped out and didn't handle modules. But really; a flamewar
all about that?? What happened to C++ in the kernel or reading
files from inside the kernel?
This patch adds module support to markup_oops.pl; it's not the
most pretty perl but it works for my testcases...
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Adams [Sun, 11 Jan 2009 19:48:53 +0000 (19:48 +0000)]
ti_usb_3410_5052: support alternate firmware
The TI USB serial driver supports specifying alternate vendor and
product IDs (since the chips can and are used in devices under other
vendor/product IDs). However, the alternate IDs were not loaded in the
combined product table. This patch also adds support for loading
alternate firmware for alternate vendor/product IDs.
Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Sun, 11 Jan 2009 19:48:41 +0000 (19:48 +0000)]
usb-serial: remove NULL check
Julia Lawell found a case where a NULL check was misplaced in the
usb-serial code. However as the object in question cannot be NULL the
check can simply be removed.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Cox [Sun, 11 Jan 2009 19:48:34 +0000 (19:48 +0000)]
neo: Remove a bogus NULL check
Julia Lawall found an un-needed check in the neo driver. Her patch moves
the check to cover the code dereferencing it, however it cannot be NULL
anyway so remove the NULL check instead.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 13 Jan 2009 00:28:26 +0000 (16:28 -0800)]
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sparc64: Fix cpumask related build failure
smp_call_function_single(): be slightly less stupid, fix
smp_call_function_single(): be slightly less stupid
rcu: fix bug in rcutorture system-shutdown code
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
ucc_geth: use correct UCCE macros
net_dma: acquire/release dma channels on ifup/ifdown
cxgb3: Keep LRO off if disabled when interface is down
sfc: SFT9001: Fix condition for LNPGA power-off
dccp ccid-3: Fix RFC reference
smsc911x: register irq with device name, not driver name
smsc911x: fix smsc911x_reg_read compiler warning
forcedeth: napi schedule lock fix
net: fix section mismatch warnings in dccp/ccids/lib/tfrc.c
forcedeth: remove mgmt unit for mcp79 chipset
qlge: Remove dynamic alloc of rx ring control blocks.
qlge: Fix schedule while atomic issue.
qlge: Remove support for device ID 8000.
qlge: Get rid of split addresses in hardware control blocks.
qlge: Get rid of volatile usage for shadow register.
forcedeth: version bump and copyright
forcedeth: xmit lock fix
netdev: missing validate_address hooks
netdev: add missing set_mac_address hook
netdev: gianfar: add MII ioctl handler
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc: Fix asm/signal.h for 32-bit.
sparc: Eliminate PROMLIB_INTERNAL as it does nothing
sparc: Kill exports of prom internal functions
sparc64: move EXPORT_SYMBOL to the symbols definition
sparc: move EXPORT_SYMBOL to the symbols definition
sparc: Create a new file lib/ksyms.c and add export of all symbols defined in assembler in lib/ to this file.
sparc: Most unaligned_64.c tweaks for branch tracer warnings.
sparc: Fix sun4d_irq.c build.
sparc: Update 32-bit defconfig.
sparc64: fix warnings in psycho_common after ull conversion
Linus Torvalds [Mon, 12 Jan 2009 23:57:34 +0000 (15:57 -0800)]
Merge branch 'for_2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6
* 'for_2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6:
Fix small typo
misdn: indentation and braces disagree - add braces
misdn: one handmade ARRAY_SIZE converted
drivers/isdn/hardware/mISDN: move a dereference below a NULL test
indentation & braces disagree - add braces
Make parameter debug writable
BUGFIX: used NULL pointer at ioctl(sk,IMGETDEVINFO,&devinfo) when devinfo.id not registered
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
[WATCHDOG] Pika Warp appliance watchdog timer
[WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610
[WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timer
[WATCHDOG] wm8350: Fix section annotations
Linus Torvalds [Mon, 12 Jan 2009 23:53:58 +0000 (15:53 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
Revert "cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write"
x86: fix apic.c build error on latest git
x86: fix mpparse.c build error on latest git
x86: avoid theoretical vmalloc fault loop
x86, mtrr: fix types used in userspace exported header
Linus Torvalds [Mon, 12 Jan 2009 23:53:02 +0000 (15:53 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - Use own workqueue
ALSA: hda - add support for Intel DX58SO board
ASoC: TWL4030: Module unloading fix
ALSA: hda - create hda_codec.control_mutex for kcontrol->private_value
ALSA: caiaq - Version 1.3.10
ALSA: hda - Add quirk for Dell Inspiron Mini9
ALSA: caiaq - Fix Oops with MIDI
ASoC: TWL4030: Change the soc_value_enum back to soc_enum
ASoC: Merge the soc_value_enum to soc_enum struct
ALSA: hda - Add quirks for Acer Aspire 5930G and 6930G
ALSA: hda - Add codec ID for MCP73 HDMI
ALSA: hda - Fix typos for AD1882 codecs
ALSA: hda - Add quirk for HP 2230s
Martyn Welch [Mon, 10 Nov 2008 12:31:33 +0000 (12:31 +0000)]
[WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610
Support for the FPGA based watchdog timer on GE Fanuc's SBC610.
This patch enables one of the watchdog timers found on the SBC610. There are
two identical watchdog timers at different offsets in the above mentioned
boards, however the current driver is only capable of supporting one of them.
The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Martyn Welch [Mon, 10 Nov 2008 12:31:26 +0000 (12:31 +0000)]
[WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timer
GE Fanuc SBC610
Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310,
SBC610 and PPC9A Single Board Computers.
This patch adds support for the watchdog timer found in one of the devices
FPGAs. There are two identical watchdog timers at different offsets in the
above mentioned boards, this driver is capable of supporting one of them.
The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
warning: ignoring return value of 'device_register', declared with attribute
warn_unused_result
warning: ignoring return value of 'device_create_file', declared with
attribute warn_unused_result
warning: ignoring return value of 'device_register', declared with attribute
warn_unused_result
warning: ignoring return value of 'device_create_file', declared with
attribute warn_unused_result
m68k: Kill several external declarations in source files
- Replace external declarations by proper includes where availiable.
The accesses to some symbols had to be modified, as before they were
declared using e.g. "extern int _end", while asm-generic/sections.h uses
e.g. "extern char _end[]"
- Remove unused or superfluous external declarations
Andreas Bombe [Wed, 10 Dec 2008 01:02:19 +0000 (02:02 +0100)]
m68k: amiflop - Get rid of sleep_on calls
Apart from sleep_on() calls that could be easily converted to
wait_event() and completion calls amiflop also used a flag in ms_delay()
and ms_isr() as a custom mutex for ms_delay() without a need for
explicit unlocking. I converted that to a standard mutex.
The replacement for the unconditional sleep_on() in fd_motor_on() is a
complete_all() together with a INIT_COMPLETION() before the mod_timer()
call. It appears to me that fd_motor_on() might be called concurrently
and fd_select() does not guarantee mutual exclusivity in the case the
same drive gets selected again.
- Improve comments and naming
- Convert macros to static inline functions
- Remove superfluous `break' after `return'
- Make sure we get a build-time error (undefined reference to
'c2p_unsupported') in case of future misuse
- Replace `unsigned long' by `u32' in comp(), as that's what all callers use
- Use {get,put}_unaligned_be32() in store_planar{,_masked}()
- Use void * for arbitrary pointers
- Use a union to represent pixels/words, to avoid casts
- 16 bpp must use the cfb_*() ops
- 16 bpp needs to set up info->pseudo_palette[] (was fbcon_cfb16_cmap[] in
2.4.x)
- Kill commented out 2.4.x fbcon remnants
- Make sure par->next_line is always set (this was done for Falcon only),
as all the text console drawing operations need a valid par->next_line,
- Make sure fix->line_length is always set, as some userspace applications
need it because they don't have fallback code for the case where it's zero.
Dieter Ries reported bootup soft-hangs and bisected it back to
this commit, and reverting this commit gave him a working system.
The commit introduces work_on_cpu() use into the cpufreq code,
but that is subtly problematic from a lock hierarchy POV: the
hotplug-cpu lock is an highlevel lock that is taken before
lowlevel locks, and in this codepath we are called with the
policy lock taken.
Dieter did not have lockdep enabled so we dont have a nice stack
trace proof for this, but using work_on_cpu() in such a lowlevel
place certainly looks wrong, so we revert the patch.
work_on_cpu() needs to be reworked to be more generally usable.
Here the intention is to get the pgd corresponding to the current process
and sync it up with the pgd in init_mm(obtained from pgd_offset_k).
However, for kernel threads current->mm is NULL and hence pgd =
pgd_offset(init_mm, address) = pgd_ref which means the fault handler
returns without setting the pgd entry in the MM structure in the context
of which the kernel thread has faulted. This could lead to never-ending
faults and busy looping of kernel threads like pdflush. So, shouldn't the
pgd = pgd_offset(current->mm ?: &init_mm, address); be pgd =
pgd_offset(current->active_mm ?: &init_mm, address);
We can use active_mm unconditionally because it should be always set.
Takashi Iwai [Mon, 12 Jan 2009 09:09:24 +0000 (10:09 +0100)]
ALSA: hda - Use own workqueue
snd-hda-intel driver used schedule_work() fot the delayed DMA pointer
updates, but this has several potential problems:
- it may block other eventsd works longer
- it may deadlock when probing fails and flush_scheduled_work() is
called during probe callback (as probe callback itself could be
invoked from eventd)
This patch adds an own workq for each driver instance to solve these
problems.
powerpc: Fix cpufreq drivers after cpufreq core changes
This updates the cpufreq drivers in arch/powerpc so they build again
after the core cpufreq changes that broke them in commit
in835481d9bcd65720b473db6b38746a74a3964218.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The nodes 'gpio[0-7]' and 'timer' configure the GPIO0..7 and M2
bits of the SYS_WAKEMSK (wakeup source enable) register. Writing '1'
enables a wakesource, 0 disables it.
The 'timer_timeout' node holds the timeout in seconds after which the
TOYMATCH2 event should wake the system.
The 'wakesrc' node holds the SYS_WAKESRC register after wakeup (in hex),
the 'wakemsk' node can be used to get/set the wakeup mask directly.
For example, to have the timer wake the system after 10 seconds of sleep,
the following must be done in userspace:
This patch also removes the homebrew CPU frequency switching code. I don't
understand how it could have ever worked reliably; it does not communicate
the clock changes to peripheral devices other than uarts.
Manuel Lauss [Sun, 21 Dec 2008 08:26:25 +0000 (09:26 +0100)]
MIPS: Alchemy: Fix up PM code on Au1550/Au1200
Au1550/Au1200 have a different memory controller which requires additi-
onal code to properly put memory to sleep (code taken from AMD/RMI's
Linux-2.6.11 source package).
Also fix up the remaining pm-related paths to compile on Au1200/Au1550
platforms.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Manuel Lauss [Sun, 21 Dec 2008 08:26:24 +0000 (09:26 +0100)]
MIPS: Alchemy: move calc_clock function.
Now that nothing in time.c depends on calc_clock, it can
be moved to clocks.c where it belongs.
While at it, give it a better non-generic name and call it
as soon as possible in plat_mem_init.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add support for the 32 kHz counter1 (RTC) as clocksource / clockevent
device. As a nice side effect, this also enables use of the 'wait'
instruction for runtime idle power savings.
If the counters aren't enabled/working properly, fall back on the
cp0 counter clock code.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Manuel Lauss [Sun, 21 Dec 2008 08:26:22 +0000 (09:26 +0100)]
MIPS: make cp0 counter clocksource/event usable as fallback.
The current mips clock build infrastructure lets a system only use
either the MIPS cp0 counter or a SoC specific timer as a clocksource /
clockevent device.
This patch renames the core cp0 counter clocksource / clockevent functions
from mips_* to r4k_* and updates the wrappers in asm-mips/time.h to
call these renamed functions instead.
Chips which can detect whether it is safe to use a chip-specific timer
can now fall back on the cp0 counter if necessary and possible
(e.g. Alchemy with a follow-on patch).
Existing behaviour is not changed in any way.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Manuel Lauss [Sun, 21 Dec 2008 08:26:21 +0000 (09:26 +0100)]
MIPS: Alchemy: remove cpu_table.
Remove the cpu_table:
- move detection of whether c0_config[OD] is read-only and should be set
to fix various chip errata to au1000 headers.
- move detection of write-only sys_cpupll to au1000 headers.
- remove the BCLK switching code: Activation of this features should be
left to the boards using the chips since it also affects external devices
tied to BCLK, and only the board designers know whether it is safe to
enable.
Manuel Lauss [Sun, 21 Dec 2008 08:26:17 +0000 (09:26 +0100)]
MIPS: Alchemy: update core interrupt code.
This patch attempts to modernize core Alchemy interrupt handling code.
- add irq_chips for irq controllers instead of irq type,
- add a set_type() hook to change irq trigger type during runtime,
- add a set_wake() hook to control GPIO0..7 based wakeup,
- use linux' IRQF_TRIGGER_ constants instead of homebrew ones,
- enable GENERIC_HARDIRQS_NO__DO_IRQ.
- simplify plat_irq_dispatch
- merge au1xxx_irqmap into irq.c file, the only place where its
contents are referenced.
- board_init_irq() is now mandatory for every board; use it to register
the remaining (gpio-based) interrupt sources; update all boards
accordingly.
Run-tested on Db1200 and other Au1200 based platforms.
Manuel Lauss [Sun, 21 Dec 2008 08:26:16 +0000 (09:26 +0100)]
MIPS: Alchemy: move commandline mangling out of common code
Not every alchemy-based board might want these options forced on it,
and most of this stuff seems to be intended for devboard code anyway.
Remove commandline mangling code out of common chip code and instead
add relevant sections to all in-tree boards to not change existing
behaviour.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Manuel Lauss [Sun, 21 Dec 2008 08:26:15 +0000 (09:26 +0100)]
MIPS: Alchemy: devboards: consolidate files
Share some code and merge small files:
- Extract the prom init code from all devboard files (they only differ in
memory configuration).
- Merge the irq configuration into board setup code.
- Merge smaller files into board setup code.
David Daney [Thu, 11 Dec 2008 23:33:36 +0000 (15:33 -0800)]
MIPS: Adjust the dma-common.c platform hooks.
We add a dev parameter to plat_unmap_dma_mem(), and hooks for
plat_dma_supported() and plat_extra_sync_for_device() which should be
nop changes for all existing targets.
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
projects / linux-2.6-omap-h63xx.git / log