Avi Kivity [Fri, 18 Jan 2008 10:38:59 +0000 (12:38 +0200)]
KVM: x86 emulator: add support for group decoding
Certain x86 instructions use bits 3:5 of the byte following the opcode as an
opcode extension, with the decode sometimes depending on bits 6:7 as well.
Add support for this in the main decoding table rather than an ad-hock
adaptation per opcode.
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3:
x86_64/mm: check and print vmemmap allocation continuous
x86_64: fix setup_node_bootmem to support big mem excluding with memmap
x86_64: make reserve_bootmem_generic() use new reserve_bootmem()
mm: allow reserve_bootmem() cross nodes
mm: offset align in alloc_bootmem()
mm: fix alloc_bootmem_core to use fast searching for all nodes
mm: make mem_map allocation continuous
Yinghai Lu [Tue, 18 Mar 2008 19:52:37 +0000 (12:52 -0700)]
x86_64: fix setup_node_bootmem to support big mem excluding with memmap
typical case: four sockets system, every node has 4g ram, and we are using:
memmap=10g$4g
to mask out memory on node1 and node2
when numa is enabled, early_node_mem is used to get node_data and node_bootmap.
if it can not get memory from the same node with find_e820_area(), it will
use alloc_bootmem to get buff from previous nodes.
so check it and print out some info about it.
need to move early_res_to_bootmem into every setup_node_bootmem.
and it takes range that node has. otherwise alloc_bootmem could return addr
that reserved early.
depends on "mm: make reserve_bootmem can crossed the nodes".
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Yinghai Lu [Tue, 18 Mar 2008 19:50:21 +0000 (12:50 -0700)]
x86_64: make reserve_bootmem_generic() use new reserve_bootmem()
"mm: make reserve_bootmem can crossed the nodes" provides new
reserve_bootmem(), let reserve_bootmem_generic() use that.
reserve_bootmem_generic() is used to reserve initramdisk, so this way
we can make sure even when bootloader or kexec load ranges cross the
node memory boundaries, reserve_bootmem still works.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-generic-bitops-v3
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-generic-bitops-v3:
x86, bitops: select the generic bitmap search functions
x86: include/asm-x86/pgalloc.h/bitops.h: checkpatch cleanups - formatting only
x86: finalize bitops unification
x86, UML: remove x86-specific implementations of find_first_bit
x86: optimize find_first_bit for small bitmaps
x86: switch 64-bit to generic find_first_bit
x86: generic versions of find_first_(zero_)bit, convert i386
bitops: use __fls for fls64 on 64-bit archs
generic: implement __fls on all 64-bit archs
generic: introduce a generic __fls implementation
x86: merge the simple bitops and move them to bitops.h
x86, generic: optimize find_next_(zero_)bit for small constant-size bitmaps
x86, uml: fix uml with generic find_next_bit for x86
x86: change x86 to use generic find_next_bit
uml: Kconfig cleanup
uml: fix build error
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootparam
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootparam:
x86, boot: Document for linked list of struct setup_data
x86, boot: export linked list of struct setup_data via debugfs
x86, boot: add linked list of struct setup_data
x86, boot: add free_early to early reservation machanism
* Export ide_dma_exec_cmd() and __ide_dma_test_irq().
* Constify struct ide_dma_ops.
* Always set hwif->dma_ops to &sff_dma_ops in ide_setup_dma()
(it is later overriden by ide_init_port() if needed) and drop
'const struct ide_port_info *d' argument.
While at it:
* Rename __ide_dma_test_irq() to ide_dma_test_irq().
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ide: do complete DMA setup in ->init_dma method (take 2)
* Make ide_hwif_setup_dma() return an error value.
* Pass 'const struct ide_port_info *d' instead of 'unsigned long dmabase'
to ->init_dma method and make it return an error value.
* Rename ide_get_or_set_dma_base() to ide_pci_dma_base(),
change ordering of its arguments and then export it.
* Export ide_pci_set_master().
* Do complete DMA setup inside ->init_dma method and update ->init_dma
users accordingly.
* Sanitize code for DMA setup in ide_init_port().
v2:
* Fix for CONFIG_BLK_DEV_IDEDMA_PCI=n configs
(from Jiri Slaby <jirislaby@gmail.com>):
Fix following compiler warning by returning EINVAL:
In file included from ANYTHING-INCLUDING-IDE.H:45:
include/linux/ide.h: In function ‘ide_hwif_setup_dma’:
include/linux/ide.h:1022: warning: no return statement in function returning non-void
Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Always use "fast" MWDMA support and remove dma_{black,white}_list
(they were based on completely bogus ->ide_dma_check implementation
which didn't set neither the host controller timings nor the device
for the desired transfer mode).
alim15x3: skip DMA initialization completely on revs < 0x20
Skip DMA initialization completely on revs < 0x20 by setting IDE_HFLAG_NO_DMA
host flag and resetting DMA host masks in alim15x3_init_one() (currently
ide_hwif_setup_dma() will try to obtain DMA base and setup PCI bus-mastering
but init_dma_ali15x3() will fail).
It is no longer needed to set hwif->mmio flag to tell IDE layer to not
manage resources so cleanup host drivers that used hwif->mmio flag only
for this purpose.
ide: manage resources for PCI devices in ide_pci_enable() (take 3)
* Reserve PCI BARs 0-3 (0-1 for single port controllers) in
ide_pci_enable() and remove ide_hwif_request_regions() call
from ide_device_add_all() (also cleanup resource management
in scc_pata host driver).
* Fix handling of PCI BAR 4 in ide_pci_enable(), then cleanup
ide_iomio_dma() (+ init_hwif_trm290() in trm290 host driver)
and remove ide_release[_iomio]_dma().
v2:
* Fixup trm290 host driver.
v3:
* Because of scc_pata host driver changes we need to call
pci_request_selected_regions() also in setup_mmio_scc().
Some of them are:
WARNING: braces {} are not necessary for single statement blocks
CHECK: multiple assignments should be avoided
WARNING: printk() should include KERN_ facility level
WARNING: no space between function name and open parenthesis '('
Huang, Ying [Fri, 28 Mar 2008 02:49:44 +0000 (10:49 +0800)]
x86, boot: add linked list of struct setup_data
This patch adds a field of 64-bit physical pointer to NULL terminated
single linked list of struct setup_data to real-mode kernel
header. This is used as a more extensible boot parameters passing
mechanism.
disable /dev/mem mmap of RAM with PAT. It makes things safer and
eliminates aliasing. A future improvement would be to avoid the
range_is_allowed duplication.
x86, bitops: select the generic bitmap search functions
Introduce GENERIC_FIND_FIRST_BIT and GENERIC_FIND_NEXT_BIT in
lib/Kconfig, defaulting to off. An arch that wants to use the
generic implementation now only has to use a select statement
to include them.
I added an always-y option (X86_CPU) to arch/x86/Kconfig.cpu
and used that to select the generic search functions. This
way ARCH=um SUBARCH=i386 automatically picks up the change
too, and arch/um/Kconfig.i386 can therefore be simplified a
bit. ARCH=um SUBARCH=x86_64 does things differently, but
still compiles fine. It seems that a "def_bool y" always
wins over a "def_bool n"?
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
include/asm-x86/bitops_32.h and include/asm-x86/bitops_64.h are now
almost identical. The 64-bit version sets ARCH_HAS_FAST_MULTIPLIER
and has an extra inline function set_bit_string. The define currently
has no influence on the generated code, but it can be argued that
setting it on i386 is the right thing to do anyhow. The addition
of the extra inline function on i386 does not hurt either.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86, UML: remove x86-specific implementations of find_first_bit
x86 has been switched to the generic versions of find_first_bit
and find_first_zero_bit, but the original versions were retained.
This patch just removes the now unused x86-specific versions.
also update UML.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Avoid a call to find_first_bit if the bitmap size is know at
compile time and small enough to fit in a single long integer.
Modeled after an optimization in the original x86_64-specific
code.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86: generic versions of find_first_(zero_)bit, convert i386
Generic versions of __find_first_bit and __find_first_zero_bit
are introduced as simplified versions of __find_next_bit and
__find_next_zero_bit. Their compilation and use are guarded by
a new config variable GENERIC_FIND_FIRST_BIT.
The generic versions of find_first_bit and find_first_zero_bit
are implemented in terms of the newly introduced __find_first_bit
and __find_first_zero_bit.
This patch does not remove the i386-specific implementation,
but it does switch i386 to use the generic functions by setting
GENERIC_FIND_FIRST_BIT=y for X86_32.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86: merge the simple bitops and move them to bitops.h
Some of those can be written in such a way that the same
inline assembly can be used to generate both 32 bit and
64 bit code.
For ffs and fls, x86_64 unconditionally used the cmov
instruction and i386 unconditionally used a conditional
branch over a mov instruction. In the current patch I
chose to select the version based on the availability
of the cmov instruction instead. A small detail here is
that x86_64 did not previously set CONFIG_X86_CMOV=y.
Improved comments for ffs, ffz, fls and variations.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86, generic: optimize find_next_(zero_)bit for small constant-size bitmaps
This moves an optimization for searching constant-sized small
bitmaps form x86_64-specific to generic code.
On an i386 defconfig (the x86#testing one), the size of vmlinux hardly
changes with this applied. I have observed only four places where this
optimization avoids a call into find_next_bit:
In the functions return_unused_surplus_pages, alloc_fresh_huge_page,
and adjust_pool_surplus, this patch avoids a call for a 1-bit bitmap.
In __next_cpu a call is avoided for a 32-bit bitmap. That's it.
On x86_64, 52 locations are optimized with a minimal increase in
code size:
Current #testing defconfig:
146 x bsf, 27 x find_next_*bit
text data bss dec hex filename 5392637 846592 724424 6963653 6a41c5 vmlinux
After removing the x86_64 specific optimization for find_next_*bit:
94 x bsf, 79 x find_next_*bit
text data bss dec hex filename 5392358 846592 724424 6963374 6a40ae vmlinux
After this patch (making the optimization generic):
146 x bsf, 27 x find_next_*bit
text data bss dec hex filename 5392396 846592 724424 6963412 6a40d4 vmlinux
The versions with inline assembly are in fact slower on the machines I
tested them on (in userspace) (Athlon XP 2800+, p4-like Xeon 2.8GHz, AMD
Opteron 270). The i386-version needed a fix similar to 06024f21 to avoid
crashing the benchmark.
Benchmark using: gcc -fomit-frame-pointer -Os. For each bitmap size
1...512, for each possible bitmap with one bit set, for each possible
offset: find the position of the first bit starting at offset. If you
follow ;). Times include setup of the bitmap and checking of the
results.
If the bitmap size is not a multiple of BITS_PER_LONG, and no set
(cleared) bit is found, find_next_bit (find_next_zero_bit) returns a
value outside of the range [0, size]. The generic version always returns
exactly size. The generic version also uses unsigned long everywhere,
while the x86 versions use a mishmash of int, unsigned (int), long and
unsigned long.
Using the generic version does give a slightly bigger kernel, though.
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes:
x86 PAT: decouple from nonpromisc devmem
x86 PAT: tone down debugging messages
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
V4L/DVB (7751): ir-kbd-i2c: Save a temporary memory allocation in ir_probe
V4L/DVB (7750): au0828/ cleanups and fixes
V4L/DVB (7748): tuner-core: some adjustments at tuner logs, if debug enabled
V4L/DVB (7746): pvrusb2: make signed one-bit bitfields unsigned
V4L/DVB (7744): pvrusb2-dvb: add atsc/qam support for Hauppauge pvrusb2 model 751xx
V4L/DVB (7742): cx88: Add support for the DViCO FusionHDTV_7_GOLD digital modes
V4L/DVB (7741): s5h1411: Adding support for this ATSC/QAM demodulator
V4L/DVB (7740): tuner-xc2028.c dubious !x & y
V4L/DVB (7739): mt312.h: dubious one-bit signed bitfield
V4L/DVB (7735): Fix compilation for au0828
V4L/DVB (7734): em28xx: copy and paste error in em28xx_init_isoc
V4L/DVB (7733): blackbird_find_mailbox negative return ignored in blackbird_initialize_codec()
V4L/DVB (7732): vivi: fix a warning
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (61 commits)
ide: sanitize handling of IDE_HFLAG_NO_SET_MODE host flag
sis5513: fail early for unsupported chipsets
it821x: fix kzalloc() failure handling
qd65xx: use IDE_HFLAG_SINGLE host flag
qd65xx: always use ->selectproc method
ide-cd: put proc-related functions together under single ifdef
ide-cd: Replace __FUNCTION__ with __func__
IDE: Coding Style fixes to drivers/ide/ide-cd.c
IDE: Coding Style fixes to drivers/ide/pci/cy82c693.c
IDE: Coding Style fixes to drivers/ide/pci/it8213.c
IDE: Coding Style fixes to drivers/ide/ide-floppy.c
IDE: Coding Style fixes to drivers/ide/legacy/ali14xx.c
IDE: Coding Style fixes to drivers/ide/legacy/hd.c
IDE: Coding Style fixes to drivers/ide/pci/cmd640.c
IDE: Coding Style fixes to drivers/ide/pci/opti621.c
IDE: Coding Style fixes to drivers/ide/ide-pnp.c
IDE: Coding Style fixes to drivers/ide/ide-proc.c
IDE: Coding Style fixes to drivers/ide/legacy/ide-4drives.c
IDE: Coding Style fixes to drivers/ide/legacy/umc8672.c
IDE: Coding Style fixes to drivers/ide/pci/generic.c
...
Merge branch 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6
* 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
agp: convert drivers/char/agp/frontend.c to use unlocked_ioctl
agp: fix shadowed variable warning in amd-k7-agp.c
Merge branch 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm: _end is shadowing real _end, just rename it.
drm/vbl rework: rework how the drm deals with vblank.
drm: reorganise minor number handling using backported modesetting code.
drm/i915: Handle tiled buffers in vblank tasklet
drm/i965: On I965, use correct 3DSTATE_DRAWING_RECTANGLE command in vblank
drm: Remove unneeded dma sync in ATI pcigart alloc
drm: Fix mismerge of non-coherent DMA patch
Ingo Molnar [Mon, 3 Mar 2008 11:38:52 +0000 (12:38 +0100)]
x86: add optimized inlining
add CONFIG_OPTIMIZE_INLINING=y.
allow gcc to optimize the kernel image's size by uninlining
functions that have been marked 'inline'. Previously gcc was
forced by Linux to always-inline these functions via a gcc
attribute:
Especially when the user has already selected
CONFIG_OPTIMIZE_FOR_SIZE=y this can make a huge difference in
kernel image size (using a standard Fedora .config):
projects / linux-2.6-omap-h63xx.git / log