Ivo van Doorn [Mon, 21 Apr 2008 17:01:40 +0000 (19:01 +0200)]
rt2x00: Clarify supported chipsets in Kconfig
As reported by Filipus Klutiero <chealer@gmail.com>,
the rt2x00 Kconfig entries should be updated with
specific chipset notifications.
This cleans up Kconfig by explicitly mentioning the
supported chipsets for each drivers, and uses the
same chipset family names as mentioned on the Ralink website.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* when removing the card while the card was scanning or associtating,
it could happen that destroy_workqueue() stuck and didn't return.
* make sure the command function doesn't run while we remove the list
of pending commands
* for still unknown reason, I had calls to lbs_stop_card() with
priv==NULL
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
They don't return anything meaningfull and no-one cares about their results.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* make debug output match the variable name
* always report that lbs_remove_rtap() has has been exited
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 30 Apr 2008 16:51:21 +0000 (18:51 +0200)]
mac80211: QoS related cleanups
This
* makes the queue number passed to drivers a u16
(as it will be with skb_get_queue_mapping)
* removes the useless queue number defines
* splits hw->queues into hw->queues/ampdu_queues
* removes the debugfs files for per-queue counters
* removes some dead QoS code
* removes the beacon queue configuration for IBSS
so that the drivers now never get a queue number
bigger than (hw->queues + hw->ampdu_queues - 1)
for tx and only in the range 0..hw->queues-1 for
conf_tx.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Tue, 29 Apr 2008 15:18:59 +0000 (17:18 +0200)]
mac80211: clean up get_tx_stats callback
The callback takes a ieee80211_tx_queue_stats with a contained
array of ieee80211_tx_queue_stats_data, remove the former, rename
the latter to ieee80211_tx_queue_stats and make tx_stats() take
the array directly.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch udpates the byte count of the frame in the registers of the
scheduler.
This patch also moves two defines in iwl-4965.h to a more appropriate
area in the file.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ron Rindjunsky [Thu, 24 Apr 2008 18:55:33 +0000 (11:55 -0700)]
iwlwifi-5000: add iwl 5000 shared memory handlers
This patch fills the needed handlers for shared memory for
iwl 5000 family
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch adds support for run time calibrations for the 5000 family HW.
Those calibrations are sensitivity calibration, and chain noise calibration.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 24 Apr 2008 18:55:28 +0000 (11:55 -0700)]
iwlwifi-5000: adding iwl5000 HW parameters
This patch adds iwl 5000 HW parameters
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 24 Apr 2008 18:55:27 +0000 (11:55 -0700)]
iwlwifi-5000: EEPROM settings for 5000
This patch adds eeprom handlers and values for 5000 HW family
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 24 Apr 2008 18:55:26 +0000 (11:55 -0700)]
iwlwifi-5000: use iwl4965_set_pwr_src in 5000
This patch makes use of iwl4965_set_pwr_src in 5000 HW family
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 24 Apr 2008 18:55:25 +0000 (11:55 -0700)]
iwlwifi-5000: add apm_init handler for 5000 HW family
This patch adds apm_init handler for 5000 HW family
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 24 Apr 2008 18:55:24 +0000 (11:55 -0700)]
iwlwifi-5000: add ops infrastructure for 5000
This patch adds handler framework for 5000 family HW
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 24 Apr 2008 18:55:23 +0000 (11:55 -0700)]
iwlwifi-5000: adding initial recognition for the 5000 family
This patch adds initial support for recognizing the iwl 5000 family of NICs
ID
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch moves hw_rx_handler_setup to iwl-4965.c
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch moves verify_ucode functions to iwl-core.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Mon, 21 Apr 2008 16:59:54 +0000 (18:59 +0200)]
rt2x00: Remove DRIVER_SUPPORT_MIXED_INTERFACES
A lot more is needed to support mixed interfaces then just this flag,
such things need new redesigns in rt2x00lib to actually make it happen.
So far there doesn't exist a Ralink chipset that can handle it, so
we might as well remove the flag for now and see what should be done
whenever a device appears that can handle it.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Mon, 21 Apr 2008 16:59:48 +0000 (18:59 +0200)]
rt2x00: Support hardware RTS and CTS-to-self frames
If the driver has set the set_rts_threshold() callback function
to mac80211 it is capable of generating RTS and CTS-to-self frames
inside the hardware and rt2x00lib doesn't have to create them
in software.
Only rt2800pci and rt2800usb support this feature.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Michael Buesch [Fri, 25 Apr 2008 19:10:54 +0000 (21:10 +0200)]
b43: Don't disable IRQs in mac_suspend
This patch removes the IRQ-disable from mac_suspend.
The main advantage of this is to get rid of the IRQ-sync call in mac_suspend.
We need to remove the MAC suspend bit from the IRQ service mask, as otherwise
the IRQ handler would race with us.
Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch moves Flow Handlers define to a new file iwl-fh.h
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ron Rindjunsky [Thu, 24 Apr 2008 00:15:06 +0000 (17:15 -0700)]
iwlwifi: iwl-sta redundant includes clean up
This patch cleans unnecessary includes in iwl-sta.[hc]
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ron Rindjunsky [Thu, 24 Apr 2008 00:15:05 +0000 (17:15 -0700)]
iwlwifi: unify init driver flow
This patch does the following:
1 - moving init_drv from handler to regular function call
2 - move the init driver flow from iwl4965 to iwlcore, thus unify it to all
iwl family as a single flow
3 - move some general purpose functions from iwl4965 to iwlcore
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch cleans up and renames some of the SCD registers.
It move SCD definitions into iwl-prhp.h file
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Guy Cohen [Thu, 24 Apr 2008 00:15:03 +0000 (17:15 -0700)]
iwlwifi: more RS improvements
Main changes:
1. no need to re-calculate expected_tpt when only toggling antenna
2. changing the code to be more strict on input and status of variables
3. enhanced debug prints
4. move to search table only if improving tpt
(don't move if SR is improved but tpt is not)
Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Guy Cohen [Thu, 24 Apr 2008 00:15:02 +0000 (17:15 -0700)]
iwlwifi: rate sacaling fixes
1. Fixing support for tx in antenna C
2. Enable stay_in_column expiration after 2 seconds
Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Guy Cohen [Thu, 24 Apr 2008 00:15:01 +0000 (17:15 -0700)]
iwlwifi: rs fix wrong parenthesizing in rs_get_lower_rate function
Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 24 Apr 2008 00:15:00 +0000 (17:15 -0700)]
iwlwifi: reorganize TX RX constatns
This patch moves TX/RX constants in 4969 headers
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch add support for toggeling of A/B/C and AB/BC/AC
antennas
Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Guy Cohen [Thu, 24 Apr 2008 00:14:58 +0000 (17:14 -0700)]
iwlwifi: rate scale module cleanups
This patch does following changes
1. rs_get_expected_tpt_table: changed get to set
2. changed IWL_DEBUG_HT to IWL_DEBUG_RATE as appropriate
3. changed rs_get_supported_rates to be returning value function
Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Guy Cohen [Thu, 24 Apr 2008 00:14:57 +0000 (17:14 -0700)]
iwlwifi: TLC modifications
1. Merge TLC fixes from AP support code
2. Remove struct iwl4965_rate
3. Misc code restructuring
Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ron Rindjunsky [Thu, 24 Apr 2008 00:14:56 +0000 (17:14 -0700)]
iwlwifi: handle shared memory
This patch generalize the use of shared memory, as size of this memory is
now allocated and freed by handlers, and also changes the location of those
actions for better resource management
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 24 Apr 2008 00:14:55 +0000 (17:14 -0700)]
iwlwifi: check eeprom version in pci probe time
This patch move eeprom version checking into pci probe stage
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 24 Apr 2008 00:14:54 +0000 (17:14 -0700)]
iwlwifi: add iwl_hw_detect function to iwl core
This patch add iwl_hw_detect function to iwl core
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 24 Apr 2008 00:14:53 +0000 (17:14 -0700)]
iwlwifi: add apm init handler
This patch add apm init handler to iwlcore handler
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Guy Cohen [Mon, 21 Apr 2008 22:42:01 +0000 (15:42 -0700)]
iwlwifi: HT antenna/chains overhaul
1. This patch restructures rate scale algorithm to support
SISO, MIMO2, MIMO3
2. It adds support for detailed valid TX and RX antennas settings
3. It removes few unesfull antenna definitions
Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch cleans up the scan flow. This patch cleans up the insertion of
the HT IE in the probe request.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ron Rindjunsky [Mon, 21 Apr 2008 22:41:59 +0000 (15:41 -0700)]
iwlwifi: support 64 bit DMA masks
This patch adds consistent DMA masks for 64 bit
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Guy Cohen [Mon, 21 Apr 2008 22:41:56 +0000 (15:41 -0700)]
iwlwifi: remove support for Narrow Channel (10Mhz)
Setting Narrow Channel bit in the scan command caused the device
not to send probe request on all the channels
Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch removes callbacks that can be replaced by the generic one.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Mon, 21 Apr 2008 22:41:54 +0000 (15:41 -0700)]
iwlwifi: remove includes to net/ieee80211.h
this patch removes remaining includes to net/ieee80211.h
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ron Rindjunsky [Mon, 21 Apr 2008 22:41:53 +0000 (15:41 -0700)]
iwlwifi: expanding HW parameters control
This patch adds several parameters to priv.hw_params, for better control
over HW capabilities variants
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Mon, 21 Apr 2008 22:41:52 +0000 (15:41 -0700)]
iwlwifi: changing EEPROM layout handling
This patch
1. changes the current EEPROM handling through a single HW struct
layout representation, to more general approach, treating the EEPROM
image as a flat bytes array, handling this image through ops functions
and offsets.
2. Eeprom is dynamically allocated accroding HW type
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mohamed Abbas [Mon, 21 Apr 2008 22:41:51 +0000 (15:41 -0700)]
iwlwifi: Add power level support
Add power level support
Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Michael Buesch [Sun, 20 Apr 2008 14:03:32 +0000 (16:03 +0200)]
b43: Rewrite LO calibration algorithm
This patch distributes the Local Oscillator calibration bursts over time,
so that calibration only happens when it's actually needed.
Currently we periodically perform a recalibration of the whole table.
The table is huge and this takes lots of time. Additionally only small bits
of the table are actually needed at a given time. So instead of maintaining
a huge table with all possible calibration values, we create dynamic calibration
settings that
a) We only calibrate when they are actually needed.
b) Are cached for some time until they expire.
So a recalibration might happen if we need a calibration setting that's not
cached, or if the active calibration setting expires.
Currently the expire timeout is set to 30 seconds. We may raise that in future.
This patch reduces overall memory consumption by nuking the
huge static calibration tables.
This patch has been tested on several 4306, 4311 and 4318 flavours.
Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
ssb: Allow reading of 440-byte SPROM that is not rev 4
The current code checks for the special signature that signifies
a revision 4 SPROM. Now that a rev. 8 SPROM with a 440-byte length
has been found that may not have any special code, this check could
be relaxed. With this patch, if the CRC is incorrect for a 256-byte
SPROM, the code will immediately check for a 440-byte SPROM. If there
is still a CRC error, the size is set to 440 bytes, which allows dumping
of most of any 512-byte SPROM if one is encountered.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch corrects the allocation of skb in ADDBA req/resp and DELBA
it removes redundant space u.addba_* are already counted in sizeof(*mgmt)
Signed-off-by: Ester Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 17 Apr 2008 23:03:39 +0000 (16:03 -0700)]
iwlwifi: export int iwl4965_set_pwr_src
This handler is universal for most of the HW
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Thu, 17 Apr 2008 23:03:38 +0000 (16:03 -0700)]
iwlwifi: define ANA_PLL values in iwl-csr.h
This patch defines ANA_PLL values in iwl-csr.h
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ron Rindjunsky [Thu, 17 Apr 2008 23:03:37 +0000 (16:03 -0700)]
iwlwifi: arranging aggregation actions
This patch makes some renaming of the ampdu_action functions inside
iwlwifi, and adds checks for correct station id in Rx flows
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
1) the uCode doesn't know about TKIP-MMIC failure, if uCode set
RX_RES_STATUS_BAD_ICV_MIC, it means ICV failure: drop the packet silently.
2) do not allocate room in the key table of the uCode is the set_key call
is a replacement of an old key
3) check the keyidx of the key in the uCode before removing it upon
disable_key call
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Thu, 17 Apr 2008 19:11:18 +0000 (21:11 +0200)]
mac80211: Add IEEE80211_KEY_FLAG_PAIRWISE
This adds a new flag to the ieee80211_key_conf structure.
This flag will inform the driver the key is pairwise rather then
a shared key.
This is important for drivers who support both types of keys,
and need to be informed which type of key this is. Alternative
would be drivers checking the address argument of set_key(),
but it will be safer when mac80211 is more explicit.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Ivo van Doorn [Thu, 17 Apr 2008 17:41:02 +0000 (19:41 +0200)]
mac80211: Replace ieee80211_tx_control->key_idx with ieee80211_key_conf
The hw_key_idx inside the ieee80211_key_conf structure does
not provide all the information drivers might need to perform
hardware encryption.
This is in particular true for rt2x00 who needs to know the
key algorithm and whether it is a shared or pairwise key.
By passing the ieee80211_key_conf pointer it assures us that
drivers can make full use of all information that it should know
about a particular key.
Additionally this patch updates all drivers to grab the hw_key_idx from
the ieee80211_key_conf structure.
v2: Removed bogus u16 cast
v3: Add warning about ieee80211_tx_control pointers
v4: Update warning about ieee80211_tx_control pointers
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Wed, 16 Apr 2008 23:34:49 +0000 (16:34 -0700)]
iwlwifi: cleanup set_pwr_src
This patch cleans up semantic of set_pwr_src
set_pwr_src is now part of apm handlers group
in iwlcore
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Tomas Winkler [Wed, 16 Apr 2008 23:34:48 +0000 (16:34 -0700)]
iwlwifi: move find station to iwl-sta.c
This patch move iwl_find_station into iwl-sta.c file
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
1) rename CONFIG_IWL4965_SENSITIVITY to IWL4965_RUN_TIME_CALIB which is
better semantic
2) move all the run time calibration to a new file: iwl-calib.c
3) simplify the sensitivity calibration flow and make it HW dependent
4) make the chain noise calibration flow HW dependent
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Allan Stephens [Mon, 5 May 2008 08:24:06 +0000 (01:24 -0700)]
tipc: Exclude debug-only print buffer code when not debugging
This patch modifies TIPC to only exclude debug-related print buffer
routines when debugging capabilities are not required. It also
fixes up some related #defines that exceed 80 characters.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Mon, 5 May 2008 08:23:34 +0000 (01:23 -0700)]
tipc: Cosmetic cleanup of system & debug output declarations
This patch contains changes to make TIPC's system & debug
message declarations more readable. Declarations have been
regrouped and recommented to make it easier to understand
what output is generated in both standard and debugging modes.
In addition, oversize lines have been fixed to respect the
80 character upper bound used in the kernel.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Mon, 5 May 2008 08:22:30 +0000 (01:22 -0700)]
tipc: Elimination of print buffer chaining
This patch revamps TIPC's print buffer subsystem to eliminate
support for arbitrary chains of print buffers, which were
rarely needed and difficult to use safely.
In its place, print buffers can now be configured to echo their
output to the system console. This provides an equivalent for
the only chaining currently utilized by TIPC, in a faster and
more compact manner.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Mon, 5 May 2008 08:21:54 +0000 (01:21 -0700)]
tipc: Fix null pointer dereference in debug code
This patch eliminates an obsolete use of the DBG_OUTPUT print
buffer which could lead to a null pointer crash in tipc_printf()
if TIPC's debugging capabilities are configured.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Allan Stephens [Mon, 5 May 2008 08:20:04 +0000 (01:20 -0700)]
tipc: Simplify log buffer resizing
This patch simplifies & standardizes the way TIPC's print buffer
log is resized. Code to terminate use of the log buffer is
eliminated by simply setting the log buffer size to 0 bytes.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kconfig-language.txt: remove bogus hint
kconfig: fix MAC OS X warnings in menuconfig
modpost: i2c aliases need no trailing wildcard
Linus Torvalds [Mon, 5 May 2008 00:07:28 +0000 (17:07 -0700)]
Merge branch 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm
* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
x86: KVM geust: make setup_secondary_clock definition dependent on local apic
KVM: MMU: Allow more than PAGES_PER_HPAGE write protections per large page
KVM: avoid fx_init() schedule in atomic
KVM: Avoid spurious execeptions after setting registers
KVM: PIT: support mode 4
KVM: x86 emulator: disable writeback on lmsw
KVM: ppc: deliver INTERRUPT_FP_UNAVAIL to the guest
KVM: ppc: Handle guest idle by emulating MSR[WE] writes
KVM: x86: task switch: fix wrong bit setting for the busy flag
KVM: VMX: Enable EPT feature for KVM
KVM: VMX: Prepare an identity page table for EPT in real mode
KVM: Export necessary function for EPT
KVM: MMU: Remove #ifdef CONFIG_X86_64 to support 4 level EPT
KVM: MMU: Add EPT support
KVM: Add kvm_x86_ops get_tdp_level()
KVM: MMU: Move some definitions to a header file
KVM: VMX: EPT Feature Detection
Ingo Molnar [Sun, 4 May 2008 07:29:43 +0000 (09:29 +0200)]
sysfs: build fix
x86.git testing found the following build failure on v2.6.26-rc1:
In file included from include/linux/kobject.h:22,
from include/linux/module.h:17,
from include/linux/crypto.h:22,
from arch/x86/kernel/asm-offsets_32.c:8,
from arch/x86/kernel/asm-offsets.c:3:
include/linux/sysfs.h:201: error: redefinition of 'sysfs_update_group'
include/linux/sysfs.h:195: error: previous definition of 'sysfs_update_group' was here
make[1]: *** [arch/x86/kernel/asm-offsets.s] Error 1
make: *** [prepare0] Error 2
the reason for the build failure is the duplicate definition of the
sysfs_update_group() inline function in include/linux/sysfs.h.
The duplication was a merge error: it was added via -mm by commit v2.6.25-7262-g2850699, "sysfs: sysfs_update_group stub for
CONFIG_SYSFS=n" a day before v2.6.26-rc1, but a day before that the same
commit was already merged upstream via the sysfs tree, with commit v2.6.25-7211-g1cbfb7a.
Linus Torvalds [Mon, 5 May 2008 00:04:16 +0000 (17:04 -0700)]
Make forced module loading optional
The kernel module loader used to be much too happy to allow loading of
modules for the wrong kernel version by default. For example, if you
had MODVERSIONS enabled, but tried to load a module with no version
info, it would happily load it and taint the kernel - whether it was
likely to actually work or not!
Generally, such forced module loading should be considered a really
really bad idea, so make it conditional on a new config option
(MODULE_FORCE_LOAD), and make it default to off.
If somebody really wants to force module loads, that's their problem,
but we should not encourage it. Especially as it happened to me by
mistake (ie regular unversioned Fedora modules getting loaded) causing
lots of strange behavior.
Adrian Bunk [Sat, 3 May 2008 19:26:17 +0000 (22:26 +0300)]
fix asm-mips/types.h syntax error
This patch fixes the following compile error caused by
commit 23cf11ddb5099f8c7f7cb3eb154bff0faf31cae9
(mips: types: use <asm-generic/int-*.h> for the mips architecture):
<-- snip -->
...
CC kernel/bounds.s
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/types.h:12,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/page-flags.h:8,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/bounds.c:9:
include2/asm/types.h:56:2: error: #endif without #if
make[2]: *** [kernel/bounds.s] Error 1
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Adrian Bunk [Sat, 3 May 2008 20:51:03 +0000 (23:51 +0300)]
fix asm-alpha/types.h breakage
This patch fixes the following compile error on alpha caused by
commit 3726c23df8e4d95b6f2b335dfa90e3f4850a8a00
(alpha: types: use <asm-generic/int-*.h> for the alpha architecture):
<-- snip -->
...
CC arch/alpha/kernel/asm-offsets.s
In file included from include2/asm/topology.h:6,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/topology.h:34,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/mmzone.h:683,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/gfp.h:4,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/slab.h:12,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/percpu.h:5,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/rcupdate.h:39,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/pid.h:4,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/sched.h:74,
from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/alpha/kernel/asm-offsets.c:9:
include2/asm/machvec.h:44: error: expected declaration specifiers or '...' before 'dma_addr_t'
include2/asm/machvec.h:44: error: expected declaration specifiers or '...' before 'dma_addr_t'
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/alpha/kernel/asm-offsets.c:12:
include2/asm/io.h:94: warning: type defaults to 'int' in declaration of 'dma_addr_t'
include2/asm/io.h:94: warning: variable 'dma_addr_t' declared 'inline'
include2/asm/io.h:94: error: expected ',' or ';' before 'isa_page_to_bus'
make[2]: *** [arch/alpha/kernel/asm-offsets.s] Error 1
<-- snip -->
Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
projects / linux-2.6-omap-h63xx.git / log