James Bottomley [Mon, 28 Nov 2005 21:41:58 +0000 (15:41 -0600)]
[SCSI] SPI DV: be more conservative about echo buffer usage
Some SCSI devices apparently get very confused if we try to use the
echo buffer on a non-DT negotiated bus (this mirrors the problems of
using PPR on non-LVD for some devices). The fix is to be far more
conservative about when we use an echo buffer. With this patch, we'll
now see what parameters are negotiated by the read only test, and only
look for an echo buffer if DT is negotiated.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Vasily Averin [Sun, 27 Nov 2005 17:15:06 +0000 (20:15 +0300)]
[SCSI] aic7xxx: reset handler selects a wrong command
To transport scsi reset command to device aic7xxx reset handler looks
at the driver's pending_list and searches any proper command. However
the search condition has been inverted: ahc_match_scb() returns TRUE
if a matched command is found. As a result the reset on required
devices did not turn out well, a correctly working neighbour device
may be surprised by the reset. aic7xxx reset handler reports about the
success, but really the original situation is not corrected yet.
Signed-off-by: Vasily Averin <vvs@sw.ru>
Naturally, there's a corresponding problem in the aic79xx driver, so
I've also added the same fix for that.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Trond Myklebust [Fri, 25 Nov 2005 22:10:11 +0000 (17:10 -0500)]
SUNRPC: Funny looking code in __rpc_purge_upcall
In __rpc_purge_upcall (net/sunrpc/rpc_pipe.c), the newer code to clean up
the in_upcall list has a typo.
Thanks to Vince Busam <vbusam@google.com> for spotting this!
Trond Myklebust [Fri, 25 Nov 2005 22:10:06 +0000 (17:10 -0500)]
NFS: Fix a spinlock recursion inside nfs_update_inode()
In cases where the server has gone insane, nfs_update_inode() may end
up calling nfs_invalidate_inode(), which again calls stuff that takes
the inode->i_lock that we're already holding.
In addition, given the sort of things we have in NFS these days that
need to be cleaned up on inode release, I'm not sure we should ever
be calling make_bad_inode().
Fix up spinlock recursion, and limit nfs_invalidate_inode() to clearing
the caches, and marking the inode as being stale.
Thanks to Steve Dickson <SteveD@redhat.com> for spotting this.
David Gibson [Thu, 24 Nov 2005 02:34:56 +0000 (13:34 +1100)]
[PATCH] powerpc: More hugepage boundary case fixes
Blah. The patch [0] I recently sent fixing errors with
in_hugepage_area() and prepare_hugepage_range() for powerpc itself has
an off-by-one bug. Furthermore, the related functions
touches_hugepage_*_range() and within_hugepage_*_range() are also
buggy. Some of the bugs, like those addressed in [0] originated with
commit 7d24f0b8a53261709938ffabe3e00f88f6498df9 where we tweaked the
semantics of where hugepages are allowed. Other bugs have been there
essentially forever, and are due to the undefined behaviour of '<<'
with shift counts greater than the type width (LOW_ESID_MASK could
return non-zero for high ranges with the right congruences).
The good news is that I now have a testsuite which should pick up
things like this if they creep in again.
Stephen Rothwell [Tue, 22 Nov 2005 01:05:26 +0000 (12:05 +1100)]
[PATCH] powerpc: remove arch/powerpc/include hack for 64 bit
With the removal of include/asm-powerpc, we no longer need
arch/powerpc/include/asm for the 64 bit build. We also do not need
-Iarch/powerpc for the 64 bit build either.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Felix Blyakher [Fri, 25 Nov 2005 05:42:13 +0000 (16:42 +1100)]
[XFS] Tight loop in xfs_finish_reclaim_all prevented the xfslogd to run
its queue of IO completion callbacks, thus creating the deadlock between
umount and xfslogd. Breaking the loop solves the problem.
Jasper Spaans [Thu, 24 Nov 2005 15:53:36 +0000 (16:53 +0100)]
[PATCH] fbcon: fix obvious bug in fbcon logo rotation code
This code fixes a tiny problem with the recent fbcon rotation changes:
fb_prepare_logo doesn't check the return value of fb_find_logo and that
causes a crash for my while booting.
Dave Airlie [Thu, 24 Nov 2005 10:41:14 +0000 (21:41 +1100)]
drm: fix quiescent locking
A fix for a locking bug which is triggered when a client tries to lock with
flag DMA_QUIESCENT (typically the X server), but gets interrupted by a signal.
The locking IOCTL should then return an error, but if DMA_QUIESCENT succeeds
it returns 0, and the client falsely thinks it has the lock. In addition
The client waits for DMA_QUISCENT and possibly DMA_READY without having the lock.
From: Thomas Hellstrom Signed-off-by: Dave Airlie <airlied@linux.ie>
David Härdeman [Wed, 23 Nov 2005 23:45:49 +0000 (15:45 -0800)]
[PATCH] USB: fix USB key generates ioctl_internal_command errors issue
On Wed, Nov 16, 2005 at 06:34:24PM -0800, Pete Zaitcev wrote:
>On Wed, 16 Nov 2005 23:52:32 +0100, David Härdeman <david@2gen.com> wrote:
>> usb-storage: waiting for device to settle before scanning
>> Vendor: I0MEGA Model: UMni1GB*IOM2K4 Rev: 1.01
>> Type: Direct-Access ANSI SCSI revision: 02
>> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
>> sda: Write Protect is off
>> sda: Mode Sense: 00 00 00 00
>> sda: assuming drive cache: write through
>> ioctl_internal_command: <8 0 0 0> return code = 8000002
>> : Current: sense key=0x0
>> ASC=0x0 ASCQ=0x0
>> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
>
>I think it's harmless. I saw things like that, and initially I plugged
>them with workarounds like this:
Thanks for the pointer, and yes, it is harmless, but it floods the
console with the messages which hides other (potentially important)
messages...following your example I've made a patch which fixes the
problem.
This should fix a suspend/resume issues that appear with OHCI on some
PPC hardware. The PCI layer should doesn't have the hooks needed for
such ASIC-specific hooks (in this case, software clock gating), so
this moves the code to do that into hcd-pci.c ... where it can be
done after the relevant PCI PM state transition (to/from D3).
David Brownell [Wed, 23 Nov 2005 23:45:37 +0000 (15:45 -0800)]
[PATCH] USB: EHCI updates split init/reinit logic for resume
Moving the PCI-specific parts of the EHCI driver into their own file
created a few issues ... notably on resume paths which (like swsusp)
require re-initializing the controller. This patch:
- Splits the EHCI startup code into run-once HCD setup code and
separate "init the hardware" reinit code. (That reinit code is
a superset of the "early usb handoff" code.)
- Then it makes the PCI init code run both, and the resume code only
run the reinit code.
- It also removes needless pci wrappers around EHCI start/stop methods.
- Removes a byteswap issue that would be seen on big-endian hardware.
The HCD glue still doesn't actually provide a good way to do all this
run-one init stuff in one place though.
David Brownell [Wed, 23 Nov 2005 23:45:28 +0000 (15:45 -0800)]
[PATCH] USB: EHCI updates
This fixes some bugs in EHCI suspend/resume that joined us over the past
few releases (as usbcore, PCI, pmcore, and other components evolved):
- Removes suspend and resume recursion from the EHCI driver, getting
rid of the USB_SUSPEND special casing.
- Updates the wakeup mechanism to work again; there's a newish usbcore
call it needs to use.
- Provide simpler tests for "do we need to restart from scratch", to
address another case where PCI Vaux was lost. (In this case it was
restoring a swsusp snapshot, but there could be others.)
Un-exports a symbol that was temporarily exported.
A notable change from previous version is that this doesn't move
the spinlock init, so there's still a resume/reinit path bug.
Ian Abbott [Wed, 23 Nov 2005 23:45:23 +0000 (15:45 -0800)]
[PATCH] USB: ftdi_sio: new IDs for KOBIL devices
This patch adds two new devices to the ftdi_sio driver's device ID
table. The device IDs were supplied by Stefan Nies of KOBIL Systems for
two of their devices using the FTDI chip.
Damian Wrobel [Wed, 23 Nov 2005 23:45:17 +0000 (15:45 -0800)]
[PATCH] USB: SN9C10x driver - bad page state fix
This patch solves the following problem I've already discovered on the
latest 2.6.15-rc1-git1 kernel:
Nov 13 07:37:28 wrobel kernel: Bad page state at free_hot_cold_page (in process 'motion', page c164e020)
Nov 13 07:37:28 wrobel kernel: flags:0x40000400 mapping:00000000 mapcount:0 count:0
Nov 13 07:37:28 wrobel kernel: Backtrace:
Nov 13 07:37:28 wrobel kernel: [<c0146d86>] bad_page+0x85/0xbe
Nov 13 07:37:28 wrobel kernel: [<c0147629>] free_hot_cold_page+0x54/0x129
Nov 13 07:37:28 wrobel kernel: [<c01598c6>] __vunmap+0xa9/0xfe
Nov 13 07:37:28 wrobel kernel: [<c0154114>] vmalloc_to_page+0x34/0x55
Nov 13 07:37:28 wrobel kernel: [<c0159942>] vfree+0x27/0x35
Nov 13 07:37:28 wrobel kernel: [<f8a20292>] sn9c102_release_buffers+0x30/0x3f [sn9c102]
Nov 13 07:37:28 wrobel kernel: [<f8a231c2>] sn9c102_release+0x37/0xeb [sn9c102]
Nov 13 07:37:28 wrobel kernel: [<c0163e74>] __fput+0xa9/0x1aa
Nov 13 07:37:28 wrobel kernel: [<c01624f7>] filp_close+0x49/0x6d
Nov 13 07:37:30 wrobel kernel: [<c016258f>] sys_close+0x74/0x95
Nov 13 07:37:30 wrobel kernel: [<c0102ef9>] syscall_call+0x7/0xb
Nov 13 07:37:31 wrobel kernel: Trying to fix it up, but a reboot is needed
When attempting to hotadd a PCI card with a bridge on it, I saw
the kernel reporting resource collision errors even when there were
really no collisions. The problem is that the code doesn't skip
over "invalid" resources with their resource type flag not set.
Others have reported similar problems at boot time and for
non-bridge PCI card hotplug too, where the code flags a
resource collision for disabled ROMs. This patch fixes both
problems.
Rajesh Shah [Wed, 23 Nov 2005 23:44:54 +0000 (15:44 -0800)]
[PATCH] PCI Express Hotplug: clear sticky power-fault bit
Per the PCI Express spec, the power-fault-detected bit in the
slot status register can be set anytime hardware detects a power
fault, regardless of whether the slot has a device populated in
it or not. This bit is sticky and must be explicitly cleared.
This patch is needed to allow hot-add after such a power fault
has been detected.
Jean Delvare [Wed, 23 Nov 2005 23:44:31 +0000 (15:44 -0800)]
[PATCH] hwmon: Fix missing it87 fan div init
Fix a bug where setting the low fan speed limits will not work if no
data was ever read through the sysfs interface and the fan clock
dividers have not been explicitely set yet either. The reason is that
data->fan_div[nr] may currently be used before it is initialized from
the chip register values. The fix is to explicitely initialize
data->fan_div[nr] before using it.
Jean Delvare [Wed, 23 Nov 2005 23:44:26 +0000 (15:44 -0800)]
[PATCH] hwmon: Fix lm78 VID conversion
Fix the lm78 VID reading, which I accidentally broke while making
this driver use the common vid_from_reg function rather than
reimplementing its own in 2.6.14-rc1.
Jody McIntyre [Wed, 23 Nov 2005 23:44:03 +0000 (15:44 -0800)]
[PATCH] Clarify T: field in MAINTAINERS
Pavel Machek points out that for git repos, what we include is not
actually a URL. It is undesirable to use a URL since git repos can be
accessed in many different ways.
Olaf Rempel [Thu, 24 Nov 2005 03:04:08 +0000 (19:04 -0800)]
[BRIDGE]: recompute features when adding a new device
We must recompute bridge features everytime the list of underlying
devices changes, or we might end up with features that are not
supported by all devices (eg. NETIF_F_TSO)
This patch adds the missing recompute when adding a device to the bridge.
Signed-off-by: Olaf Rempel <razzor@kopf-tisch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
net/ipv4/netfilter/ip_conntrack_netlink.c: In function 'ctnetlink_dump_table':
net/ipv4/netfilter/ip_conntrack_netlink.c:409: warning: implicit declaration of function 'local_bh_disable'
net/ipv4/netfilter/ip_conntrack_netlink.c:427: warning: implicit declaration of function 'local_bh_enable'
Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David Gibson [Wed, 23 Nov 2005 21:37:45 +0000 (13:37 -0800)]
[PATCH] powerpc: fix for hugepage areas straddling 4GB boundary
Commit 7d24f0b8a53261709938ffabe3e00f88f6498df9 fixed bugs in the ppc64 SLB
miss handler with respect to hugepage handling, and in the process tweaked
the semantics of the hugepage address masks in mm_context_t.
Unfortunately, it left out a couple of necessary changes to go with that
change. First, the in_hugepage_area() macro was not updated to match,
second prepare_hugepage_range() was not updated to correctly handle
hugepages regions which straddled the 4GB point.
The latter appears only to cause process-hangs when attempting to map such
a region, but the former can cause oopses if a get_user_pages() is
triggered at the wrong point. This patch addresses both bugs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If unregister_console() is inadvertently called while no consoles are
registered, it will crash trying to dereference NULL pointer. It is
necessary to fix that because register_console() provides no indication
that it actually registered the console passed in. In fact, it may well
decide not to register it based on various things...
(akpm: It'd be better to make register_console() return something and fix the
callers. All 106 of them...)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jim Keniston [Wed, 23 Nov 2005 21:37:42 +0000 (13:37 -0800)]
[PATCH] kprobes: Fix return probes on sys_execve
Fix a bug in kprobes that can cause an Oops or even a crash when a return
probe is installed on one of the following functions: sys_execve,
do_execve, load_*_binary, flush_old_exec, or flush_thread. The fix is to
remove the call to kprobe_flush_task() in flush_thread(). This fix has
been tested on all architectures for which the return-probes feature has
been implemented (i386, x86_64, ppc64, ia64). Please apply.
BACKGROUND
Up to now, we have called kprobe_flush_task() under two situations: when a
task exits, and when it execs. Flushing kretprobe_instances on exit is
correct because (a) do_exit() doesn't return, and (b) one or more
return-probed functions may be active when a task calls do_exit(). Neither
is the case for sys_execve() and its callees.
Initially, the mistaken call to kprobe_flush_task() on exec was harmless
because we put the "real" return address of each active probed function
back in the stack, just to be safe, when we recycled its
kretprobe_instance. When support for ppc64 and ia64 was added, this safety
measure couldn't be employed, and was eventually dropped even for i386 and
x86_64. sys_execve() and its callees were informally blacklisted for
return probes until this fix was developed.
Acked-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Wed, 23 Nov 2005 21:37:40 +0000 (13:37 -0800)]
[PATCH] mm: fill arch atomic64 gaps
alpha, sparc64, x86_64 are each missing some primitives from their atomic64
support: fill in the gaps I've noticed by extrapolating asm, follow the
groupings in each file. But powerpc and parisc still lack atomic64.
Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <ak@muc.de> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Wed, 23 Nov 2005 21:37:39 +0000 (13:37 -0800)]
[PATCH] mm: powerpc ptlock comments
Update comments (only) on page_table_lock and mmap_sem in arch/powerpc.
Removed the comment on page_table_lock from hash_huge_page: since it's no
longer taking page_table_lock itself, it's irrelevant whether others are; but
how it is safe (even against huge file truncation?) I can't say.
Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Wed, 23 Nov 2005 21:37:38 +0000 (13:37 -0800)]
[PATCH] mm: unbloat get_futex_key
The follow_page changes in get_futex_key have left it with two almost
identical blocks, when handling the rare case of a futex in a nonlinear vma.
get_user_pages will itself do that follow_page, and its additional
find_extend_vma is hardly any overhead since the vma is already cached. Let's
just delete the follow_page block and let get_user_pages do it.
Hugh Dickins [Wed, 23 Nov 2005 21:37:37 +0000 (13:37 -0800)]
[PATCH] mm: update split ptlock Kconfig
Closer attention to the arithmetic shows that neither ppc64 nor sparc really
uses one page for multiple page tables: how on earth could they, while
pte_alloc_one returns just a struct page pointer, with no offset?
Well, arm26 manages it by returning a pte_t pointer cast to a struct page
pointer, harumph, then compensating in its pmd_populate. But arm26 is never
SMP, so it's not a problem for split ptlock either.
And the PA-RISC situation has been recently improved: CONFIG_PA20 works
without the 16-byte alignment which inflated its spinlock_t. But the current
union of spinlock_t with private does make the 7xxx struct page significantly
larger, even without debug, so disable its split ptlock.
Changing the #define to an inline function breaks on non-SMP builds,
since wuite a few places in the kernel do not implement the ipi handler
when compiling for UP.
Dave Airlie [Wed, 23 Nov 2005 11:12:59 +0000 (22:12 +1100)]
drm: move is_pci to the end of the structure
We memset the structure across opens except for the flags. The correct
fix is more intrusive but this should fix a problem with bad iounmaps
seen on AGP radeons acting like PCI ones.
Dave Airlie [Wed, 23 Nov 2005 10:45:43 +0000 (21:45 +1100)]
I think that if a PCI bus is a root bus, attached to a host bridge not a
PCI->PCI bridge, then bus->self is allowed to be NULL. Certainly that's
the case on my Pegasos, and it makes the MGA DRM driver oops...
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
Linus Torvalds [Wed, 23 Nov 2005 03:39:30 +0000 (19:39 -0800)]
Fix up GFP_ZONEMASK for GFP_DMA32 usage
There was some confusion about the different zone usage, this should fix
up the resulting mess in the GFP zonemask handling.
The different zone usage is still confusing (it's very easy to mix up
the individual zone numbers with the GFP zone _list_ numbers), so we
might want to clean up some of this in the future, but in the meantime
this should fix the actual problems.
Neil Horman [Tue, 22 Nov 2005 22:56:32 +0000 (14:56 -0800)]
[NET]: Fix ifenslave to not fail on lack of IP information
Patch to ifenslave so that under older ABI versions, a failure to propogate ip
information from master to slave does not result in a filure to enslave the
slave device.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Remove proto == NULL checking since ip_conntrack_[nat_]proto_find_get
always returns a valid pointer.
Fix missing ip_conntrack_proto_put in some paths.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Tue, 22 Nov 2005 22:47:37 +0000 (14:47 -0800)]
[IPV4]: Fix secondary IP addresses after promotion
This patch fixes the problem with promoting aliases when:
a) a single primary and > 1 secondary addresses
b) multiple primary addresses each with at least one secondary address
Based on earlier efforts from Brian Pomerantz <bapper@piratehaven.org>,
Patrick McHardy <kaber@trash.net> and Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Zippel [Tue, 22 Nov 2005 05:32:38 +0000 (21:32 -0800)]
[PATCH] prefer pkg-config for the QT check
This makes pkg-config now the prefered way to configure QT and properly
fixes the recent Fedora breakage and leaves the old QT detection as
fallback mechanism.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] device-mapper raid1: drop mark_region spinlock fix
The spinlock region_lock is held while calling mark_region which can sleep.
Drop the spinlock before calling that function.
A region's state and inclusion in the clean list are altered by rh_inc and
rh_dec. The state variable is set to RH_CLEAN in rh_dec, but only if
'pending' is zero. It is set to RH_DIRTY in rh_inc, but not if it is already
so. The changes to 'pending', the state, and the region's inclusion in the
clean list need to be atomicly.
Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The linux bitset operators (test_bit, set_bit etc) work on arrays of "unsigned
long". dm-log uses such bitsets but treats them as arrays of uint32_t, only
allocating and zeroing a multiple of 4 bytes (as 'clean_bits' is a uint32_t).
The patch below fixes this problem.
The problem is specific to 64-bit big endian machines such as s390x or ppc-64
and can prevent pvmove terminating.
In the simplest case, if "region_count" were (say) 30, then
bitset_size (below) would be 4 and bitset_uint32_count would be 1.
Thus the memory for this butset, after allocation and zeroing would
be
0 0 0 0 X X X X
On a bigendian 64bit machine, bit 0 for this bitset is in the 8th
byte! (and every bit that dm-log would use would be in the X area).
0 0 0 0 X X X X
^
here
which hasn't been cleared properly.
As the dm-raid1 code only syncs and counts regions which have a 0 in the
'sync_bits' bitset, and only finishes when it has counted high enough, a large
number of 1's among those 'X's will cause the sync to not complete.
It is worth noting that the code uses the same bitsets for in-memory and
on-disk logs. As these bitsets are host-endian and host-sized, this means
that they cannot safely be moved between computers with
Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In some circumstances the LIST_VERSIONS output is truncated because the size
calculation forgets about a 'uint32_t' in each structure - but the inclusion
of the whole of ALIGN_MASK frequently compensates for the omission.
This is a quick workaround to use an upper bound. (The code ought to be fixed
to supply the actual size.)
Running 'dmsetup targets' may demonstrate the problem: when I run it, the last
line comes out as 'erro' instead of 'error'. Consequently, 'lvcreate --type
error' doesn't work.
Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Matthew Dobson [Tue, 22 Nov 2005 05:32:29 +0000 (21:32 -0800)]
[PATCH] Fix a bug in scsi_get_command
scsi_get_command() attempts to write into a structure that may not have
been successfully allocated. Move this write inside the if statement that
ensures we won't panic the kernel with a NULL pointer dereference.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Grant Coady [Tue, 22 Nov 2005 05:32:28 +0000 (21:32 -0800)]
[PATCH] cpufreq: silence cpufreq for UP
drivers/cpufreq/cpufreq.c: In function `cpufreq_remove_dev':
drivers/cpufreq/cpufreq.c:696: warning: unused variable `cpu_sys_dev'
Signed-off-by: Grant Coady <gcoady@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Paris [Tue, 22 Nov 2005 05:32:28 +0000 (21:32 -0800)]
[PATCH] hugetlb: fix race in set_max_huge_pages for multiple updaters of nr_huge_pages
If there are multiple updaters to /proc/sys/vm/nr_hugepages simultaneously
it is possible for the nr_huge_pages variable to become incorrect. There
is no locking in the set_max_huge_pages function around
alloc_fresh_huge_page which is able to update nr_huge_pages. Two callers
to alloc_fresh_huge_page could race against each other as could a call to
alloc_fresh_huge_page and a call to update_and_free_page. This patch just
expands the area covered by the hugetlb_lock to cover the call into
alloc_fresh_huge_page. I'm not sure how we could say that a sysctl section
is performance critical where more specific locking would be needed.
My reproducer was to run a couple copies of the following script
simultaneously
and then watch /proc/meminfo and eventually you will see things like
HugePages_Total: 100
HugePages_Free: 109
After applying the patch all seemed well.
Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: William Irwin <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] vgacon: Fix usage of stale height value on vc initialization
Reported by: Wayne E. Harlan
"[1.] One line summary of the problem:
When the kernel option "vga=1" is used, additional tty's (alt+control+Fx
with x=2,3,4,5, etc) do not provide the full 50 lines of output. The first
one does have 50 lines, however.
[2.] Full description of the problem/report:
These addtitional tty's show only 39 lines plus the top pixel of the 40-th
line. The remaining lines are black and not shown. Kernel version
2.6.13.4 does not show this problem."
This bug is caused by using a stale font height value on vgacon_init.
Booting with vga=1 gives an 80x50 screen with an 8x8 font. Somewhere
during the initialization, the font was changed to 8x9 and the first
vc was correctly resized to 80x44. However, the rest of the vc's were
not allocated yet, and when they were subsequently initialized, they
still used a font height of 8 (instead of 9) causing the mentioned bug.
Fix by saving the new font height to vga_video_font_height.
The shift value (amount to shift the bitmap so first pixel starts at
origin(0,0)) is incorrect. This causes corrupted characters or a kernel crash
if fontwidth is not divisible by 8 at 270 degrees, or fontheight not divisible
by 8 at 180 degrees.
Report and part of the fix contributed by Knut Petersen.
David Gibson [Tue, 22 Nov 2005 05:32:24 +0000 (21:32 -0800)]
[PATCH] Fix hugetlbfs_statfs() reporting of block limits
Currently, if a hugetlbfs is mounted without limits (the default), statfs()
will return -1 for max/free/used blocks. This does not appear to be in
line with normal convention: simple_statfs() and shmem_statfs() both return
0 in similar cases. Worse, it confuses the translation logic in
put_compat_statfs(), causing it to return -EOVERFLOW on such a mount.
This patch alters hugetlbfs_statfs() to return 0 for max/free/used blocks
on a mount without limits. Note that we need the test in the patch below,
rather than just using 0 in the sbinfo structure, because the -1 marked in
the free blocks field is used internally to tell the
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
David Gibson [Tue, 22 Nov 2005 05:32:23 +0000 (21:32 -0800)]
[PATCH] Fix error handling with put_compat_statfs()
In fs/compat.c, whenever put_compat_statfs() returns an error, the
containing syscall returns -EFAULT. This is presumably by analogy with the
non-compat case, where any non-zero code from copy_to_user() should be
translated into an EFAULT. However, put_compat_statfs() is also return
-EOVERFLOW. The same applies for put_compat_statfs64().
This bug can be observed with a statfs() on a hugetlbfs directory.
hugetlbfs, when mounted without limits reports available, free and total
blocks as -1 (itself a bug, another patch coming). statfs() will
mysteriously return EFAULT although it's parameters are perfectly valid
addresses.
This patch causes the compat versions of statfs() and statfs64() to
correctly propogate the return values from put_compat_statfs() and
put_compat_statfs64().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Hugh Dickins [Tue, 22 Nov 2005 05:32:22 +0000 (21:32 -0800)]
[PATCH] unpaged: fix sound Bad page states
Earlier I unifdefed PageCompound, so that snd_pcm_mmap_control_nopage and
others can give out a 0-order component of a higher-order page, which won't
be mistakenly freed when zap_pte_range unmaps it. But many Bad page states
reported a PG_reserved was freed after all: I had missed that we need to
say __GFP_COMP to get compound page behaviour.
Some of these higher-order pages are allocated by snd_malloc_pages, some by
snd_malloc_dev_pages; or if SBUS, by sbus_alloc_consistent - but that has
no gfp arg, so add __GFP_COMP into its sparc32/64 implementations.
I'm still rather puzzled that DRM seems not to need a similar change.
Hugh Dickins [Tue, 22 Nov 2005 05:32:20 +0000 (21:32 -0800)]
[PATCH] unpaged: PG_reserved bad_page
It used to be the case that PG_reserved pages were silently never freed, but
in 2.6.15-rc1 they may be freed with a "Bad page state" message. We should
work through such cases as they appear, fixing the code; but for now it's
safer to issue the message without freeing the page, leaving PG_reserved set.
Hugh Dickins [Tue, 22 Nov 2005 05:32:19 +0000 (21:32 -0800)]
[PATCH] unpaged: ZERO_PAGE in VM_UNPAGED
It's strange enough to be looking out for anonymous pages in VM_UNPAGED areas,
let's not insert the ZERO_PAGE there - though whether it would matter will
depend on what we decide about ZERO_PAGE refcounting.
But whereas do_anonymous_page may (exceptionally) be called on a VM_UNPAGED
area, do_no_page should never be: just BUG_ON.
Hugh Dickins [Tue, 22 Nov 2005 05:32:18 +0000 (21:32 -0800)]
[PATCH] unpaged: anon in VM_UNPAGED
copy_one_pte needs to copy the anonymous COWed pages in a VM_UNPAGED area,
zap_pte_range needs to free them, do_wp_page needs to COW them: just like
ordinary pages, not like the unpaged.
But recognizing them is a little subtle: because PageReserved is no longer a
condition for remap_pfn_range, we can now mmap all of /dev/mem (whether the
distro permits, and whether it's advisable on this or that architecture, is
another matter). So if we can see a PageAnon, it may not be ours to mess with
(or may be ours from elsewhere in the address space). I suspect there's an
entertaining insoluble self-referential problem here, but the page_is_anon
function does a good practical job, and MAP_PRIVATE PROT_WRITE VM_UNPAGED will
always be an odd choice.
In updating the comment on page_address_in_vma, noticed a potential NULL
dereference, in a path we don't actually take, but fixed it.
Hugh Dickins [Tue, 22 Nov 2005 05:32:17 +0000 (21:32 -0800)]
[PATCH] unpaged: COW on VM_UNPAGED
Remove the BUG_ON(vma->vm_flags & VM_UNPAGED) from do_wp_page, and let it do
Copy-On-Write without touching the VM_UNPAGED's page counts - but this is
incomplete, because the anonymous page it inserts will itself need to be
handled, here and in other functions - next patch.
We still don't copy the page if the pfn is invalid, because the
copy_user_highpage interface does not allow it. But that's not been a problem
in the past: can be added in later if the need arises.
Hugh Dickins [Tue, 22 Nov 2005 05:32:16 +0000 (21:32 -0800)]
[PATCH] unpaged: VM_NONLINEAR VM_RESERVED
There's one peculiar use of VM_RESERVED which the previous patch left behind:
because VM_NONLINEAR's try_to_unmap_cluster uses vm_private_data as a swapout
cursor, but should never meet VM_RESERVED vmas, it was a way of extending
VM_NONLINEAR to VM_RESERVED vmas using vm_private_data for some other purpose.
But that's an empty set - they don't have the populate function required. So
just throw away those VM_RESERVED tests.
But one more interesting in rmap.c has to go too: try_to_unmap_one will want
to swap out an anonymous page from VM_RESERVED or VM_UNPAGED area.
projects / linux-2.6-omap-h63xx.git / log