Keith Owens [Tue, 26 Jun 2007 06:25:22 +0000 (16:25 +1000)]
[IA64] Correct unwind validation code
Both rp_loc and pfs_loc can be in the register stack area _or_ they can
be in the memory stack area, the latter occurs when a struct pt_regs is
pushed. Correct the validation check on these fields to check for both
stack areas. Not allowing for memory stack locations means no
backtrace past ia64_leave_kernel, or any other code that uses
PT_REGS_UNWIND_INFO.
Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
Thomas Gleixner [Sat, 23 Jun 2007 09:48:40 +0000 (11:48 +0200)]
FUTEX: Restore the dropped ERSCH fix
The return value of futex_find_get_task() needs to be -ESRCH in case
that the search fails. This was part of the original futex fixes and
got accidentally dropped, when the futex-tidy-up patch was split out.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Stable Team <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 24 Jun 2007 16:42:15 +0000 (09:42 -0700)]
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[NET]: Make skb_seq_read unmap the last fragment
[NET]: Re-enable irqs before pushing pending DMA requests
[TCP] tcp_read_sock: Allow recv_actor() return return negative error value.
[PPP]: Fix osize too small errors when decoding mppe.
[PPP]: Revert 606f585e363527da9feaed79465132c0c661fd9e
[TIPC]: Fix infinite loop in netlink handler
[SKBUFF]: Fix incorrect config #ifdef around skb_copy_secmark
[IPV4]: include sysctl.h from inetdevice.h
[IPV6] NDISC: Fix thinko to control Router Preference support.
[NETFILTER]: nfctnetlink: Don't allow to change helper
[NETFILTER]: nf_conntrack_sip: add missing message types containing RTP info
Tian Kevin [Sun, 24 Jun 2007 00:16:52 +0000 (17:16 -0700)]
ACPI: preserve the ebx value in acpi_copy_wakeup_routine
Register %ebx serves as the "global offset table base register" for
position-independent code. For absolute code, %ebx serves as a local
register and has no specified role in the function calling sequence. In
either case, a function must preserve the register value for the caller.
acpi_copy_wakeup_routine overrides %ebx without saving it, this may corrupt
the called data.
Kevin found that most time the value of Sx is saved in %esi, however
sometimes compiler also uses %ebx. When this happens, suspends fails since
sleep value in ebx is changed by acpi_copy_wakeup_routine.
The same funtion in X86_64 doesn't have this problem.
Signed-off-by: Zhang Rui <rui.zhang@intel.com> Looks-okay-to: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Carsten Otte [Sun, 24 Jun 2007 00:16:46 +0000 (17:16 -0700)]
ext2: disallow setting xip on remount
Yan Zheng pointed out that ext2_remount lacks checking if -o xip should be
enabled or not. This patch checks for presence of direct_access on the
backing block device and if the blocksize meets the requirements.
Signed-off-by: Carsten Otte <cotte@de.ibm.com> Cc: Yan Zheng <yanzheng@21cn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joshua Wise [Sun, 24 Jun 2007 00:16:45 +0000 (17:16 -0700)]
x86_64: fix misplaced `continue' in mce.c
Background:
When a userspace application wants to know about machine check events, it
opens /dev/mcelog and does a read(). Usually, we found that this interface
works well, but in some cases, when the system was taking large numbers of
machine check exceptions, the read() would hang. The system would output a
soft-lockup warning, and the daemon reading from /dev/mcelog would suck up
as much of a single CPU as it could spinning in system space.
Description:
This patch fixes this bug. In particular, there was a "continue" inside a
timeout loop that presumably was intended to break out of the outer loop,
but instead caused the inner loop to continue. This patch also makes the
condition for the break-out a little more evident by changing a
!time_before to a time_after_eq.
Result:
The read() no longer hangs in this test case.
Testing:
On my system, I could replicate the bug with the following command:
# for i in `seq 15000`; do ./inject_sbe.sh; done
where inject_sbe.sh contains commands to inject a single-bit error into the
next memory write transaction.
Andy Whitcroft [Sun, 24 Jun 2007 00:16:44 +0000 (17:16 -0700)]
update checkpatch.pl to version 0.06
Update to checkpatch.pl v0.06. Of note:
- do { and else handled correctly as control structures for { matching
- trailing whitespace correctly tripped when line otherwise empty
- support for const, including const foo * const bar
- multiline macros defining values correctly reported
This version of checkpatch.pl can be found at the following URL:
Andy Whitcroft (14):
Version: 0.06
cleanup the Type regular expression declarations
fix up block counting
end of line counts as a space for ++ and --
do { needs the same checks as if, for et al
handle "const foo * const a" as a valid type
add spacing checks following ;
complete whitespace lines should trip trailing whitespace check
else is also a block control structure
badly formatted else can trip function declaration
detect and report trailing statements after else
types need to be terminated by a boundary
multiline macros defining values should be surrounded by parentheses
soften the wording of the Signed-off-by: warnings
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Hansen [Sun, 24 Jun 2007 00:16:42 +0000 (17:16 -0700)]
document nlink function
These should have been documented from the beginning. Fix it.
Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Dike [Sun, 24 Jun 2007 00:16:39 +0000 (17:16 -0700)]
uml: add asm/paravirt.h
Add asm-um/paravirt.h so that i386 headers that get pulled into UML
don't cause build failures when they want asm/paravirt.h.
Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ingo Korb [Sun, 24 Jun 2007 00:16:35 +0000 (17:16 -0700)]
Char: stallion, fix oops during init with ISA cards
The stallion driver oopses while initializing ISA cards due to an
uninitialized variable. This patch changes the initialisation order to
match the PCI code path.
Ivan Kokshaysky [Sun, 24 Jun 2007 00:16:35 +0000 (17:16 -0700)]
alpha: fix alignment problem in csum_ipv6_magic()
Hopefully this fixes http://bugzilla.kernel.org/show_bug.cgi?id=8635
The struct in6_addr passed to csum_ipv6_magic() is 4 byte aligned, so we
can't use the regular 64-bit loads. Since the cost of handling of 4 byte
and 1 byte aligned 64-bit data is roughly the same, this code can cope with
any src/dst [mis]alignment.
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Dustin Marquess <jailbird@alcatraz.fdf.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Whitcroft [Sun, 24 Jun 2007 00:16:34 +0000 (17:16 -0700)]
update checkpatch.pl to version 0.05
This version brings a some new tests, and a host of changes to fix
false positives, of particular note:
- detect 'var ++;' and 'var --;' as a bad combination
- multistatement #defines are now checked based on statement count
- multistatement #defines with initialisation correctly reported
- checks the location of the inline keywords
- EXPORT_SYMBOL for variables are now understood
- typedefs are loosened to handle sparse etc
This version of checkpatch.pl can be found at the following URL:
Andy Whitcroft (18):
Version: 0.05
macro definition checks should be for a single statement
avoid assignements only in if conditionals
declarations of function pointers need no space
multiline macros which are purely initialisation cannot be wrapped
EXPORT_SYMBOL can also directly follow a variable definition
check on the location of the inline keyword
EXPORT_SYMBOL needs to allow for attributes
ensure we do not find C99 // in strings
handle malformed #include lines
accept the {0,} form
typedefs are sensible for defining function pointer parameters
ensure { handling correctly handles nested switch() statements
trailing whitespace checks are not anchored
typedefs for sparse bitwise annotations make sense
update the type matcher to include sparse annotations
clean up indent and spacing
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sched: fix next_interval determination in idle_balance()
The intervals of domains that do not have SD_BALANCE_NEWIDLE must be
considered for the calculation of the time of the next balance. Otherwise
we may defer rebalancing forever.
Siddha also spotted that the conversion of the balance interval
to jiffies is missing. Fix that to.
also continue the loop if !(sd->flags & SD_LOAD_BALANCE).
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It did in fact trigger under all three of mainline, CFS, and -rt including CFS
-- see below for a couple of emails from last Friday giving results for these
three on the AMD box (where it happened) and on a single-quad NUMA-Q system
(where it did not, at least not with such severity).
Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLUB: fix behavior if the text output of list_locations overflows PAGE_SIZE
If slabs are allocated or freed from a large set of call sites (typical for
the kmalloc area) then we may create more output than fits into a single
PAGE and sysfs only gives us one page. The output should be truncated.
This patch fixes the checks to do the truncation properly.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks [Sun, 24 Jun 2007 00:16:29 +0000 (17:16 -0700)]
SM501: Fix sm501_init_reg() mask/set order
The order of the set and mask operation in sm501_init_reg() was setting and
then masking the bits set. Correct the order so that we do not end up with
288MHz SDRAM clocks on certain systems.
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks [Sun, 24 Jun 2007 00:16:29 +0000 (17:16 -0700)]
SM501: initialise SDRAM clock before bus clocks
This init sequence of setting the SDRAM clock before the bus clock is
recommend by Silicon Motion to stop problems with writes not sticking into
registers.
Signed-off-by: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Egmont Koblinger [Sun, 24 Jun 2007 00:16:27 +0000 (17:16 -0700)]
console UTF-8 fixes (fix)
Recently my console UTF-8 patch went mainline. Here is an additional patch
that fixes two nasty issues and improves a third one, namely:
1. My patch changed the behavior if a glyph is not found in the Unicode
mapping table. Previously for Unicode values less than 256 or 512 the
kernel tried to display the glyph from that position of the glyph table,
which could lead to a different accented letter being displayed. I
removed this fallback possibility and changed it to display the
replacement symbol.
As Behdad pointed out, some fonts (e.g. sun12x22 from the kbd package)
lack Unicode mapping information, hence all you get is lots of question
marks. Though theoretically it's actually a user-space bug (the font
should be fixed), Behdad and I both believe that it'd be good to work
around in the kernel by re-introducing the fallback solution for ASCII
characters only. This sounds a quite reasonable decision, since all fonts
ship the ASCII characters in the first 128 positions. This way users
won't be surprised by lots of question marks just because s/he issued a
not-so-perfectly parameterized setfont command. As this fallback is only
re-introduced for code points below 128, you still won't see an accented
letter replaced by another, but at least you'll always get the English
letters right.
2. My patch introduced "question mark with inverted color attributes" as a
last resort fallback glyph. Though it perfectly works on VGA console, on
framebuffer you may end up with question marks that are highlighed but
shouldn't be, and normal characters that are accidentally highlighed.
This is caused by missing FLUSHes when changing the color attribute.
3. I've updated the table of double-width character based on Markus's
updated version. Only ten new code poings (one interval) is added.
Jean Delvare [Sun, 24 Jun 2007 00:16:24 +0000 (17:16 -0700)]
hwmon/coretemp: fix a broken error path
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Olaf Kirch [Sun, 24 Jun 2007 06:11:52 +0000 (23:11 -0700)]
[NET]: Make skb_seq_read unmap the last fragment
Having walked through the entire skbuff, skb_seq_read would leave the
last fragment mapped. As a consequence, the unwary caller would leak
kmaps, and proceed with preempt_count off by one. The only (kind of
non-intuitive) workaround is to use skb_seq_read_abort.
This patch makes sure skb_seq_read always unmaps frag_data after
having cycled through the skb's paged part.
Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Sun, 24 Jun 2007 06:09:23 +0000 (23:09 -0700)]
[NET]: Re-enable irqs before pushing pending DMA requests
This moves the local_irq_enable() call in net_rx_action() to before
calling the CONFIG_NET_DMA's dma_async_memcpy_issue_pending() rather
than after. This shortens the irq disabled window and allows for DMA
drivers that need to do their own irq hold.
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_read_sock() currently assumes that the recv_actor() only returns
number of bytes copied. For network splice receive, we may have to
return an error in some cases. So allow the actor to return a negative
error value.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
[PPP]: Fix osize too small errors when decoding mppe.
The mppe_decompress() function required a buffer that is 1 byte too
small when receiving a message of mru size. This fixes buffer
allocation to prevent this from occurring.
Signed-off-by: Konstantin Sharlaimov <konstantin.sharlaimov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Sun, 24 Jun 2007 05:59:40 +0000 (22:59 -0700)]
[TIPC]: Fix infinite loop in netlink handler
The tipc netlink config handler uses the nlmsg_pid from the
request header as destination for its reply. If the application
initialized nlmsg_pid to 0, the reply is looped back to the kernel,
causing hangup. Fix: use nlmsg_pid of the skb that triggered the
request.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Always disable/enable interrupts in the acpi idle routine,
even in the error path.
This is required as the 2.6.20 change in git commit d331e739f5ad2aaa9...
"Fix interrupt race in idle callback" expects the idle handler
to enable interrupt before returning.
There was a case in acpi idle routine, in which interrupt was not being
enabled before return, which caused the system to hang at bootup, while
enabling C-states on an SMP system.
The signature of the hang was that "processor.nocst"
was required to enable boot.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Update defconfigs for ATNGW100 and ATSTK1002. This will enable the
SLUB allocator by default on both, and will enable NFS root on
ATSTK1002 (ATNGW100 had it enabled before.)
[AVR32] NGW100, Remove relics of the old USART mapping scheme
USART mapping used to be accomplished by the manual filling of
at32_usart_map[] and at32_nr_usarts. This has now been replaced
with at32_map_usart() so we can remove these variables.
Signed-off-by: Ben Nizette <ben.nizette@iinet.net.au> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
If (start + size) is not cacheline aligned and (start & mask) > (end &
mask), the last but one cacheline won't be invalidated as it should.
Fix this by rounding `end' down to the nearest cacheline boundary if
it gets adjusted due to misalignment.
Also flush the write buffer unconditionally -- if the dcache wrote
back a line just before we invalidated it, the dirty data may be
sitting in the write buffer waiting to corrupt our buffer later.
Andi Kleen [Sat, 23 Jun 2007 00:29:23 +0000 (02:29 +0200)]
i386: Make CMPXCHG64 only dependent on PAE
It is only used for PAE kernels in set_64bit.
The problem is that due to a old Windows bug many CPUs need magic MSRs
to enable CMPXCHG64, and we can't do that nicely early enough before
it is potentially used.
But since we only need it in PAE kernels so only force the checking
for CMPXCHG65 with PAE.
Satyam Sharma [Sat, 23 Jun 2007 00:04:27 +0000 (17:04 -0700)]
[IPV4]: include sysctl.h from inetdevice.h
When CONFIG_INET=y and CONFIG_SYSCTL=n:
In file included from net/core/netpoll.c:16:
include/linux/inetdevice.h:15: error:
'__NET_IPV4_CONF_MAX' undeclared here (not in a function)
make[2]: *** [net/core/netpoll.o] Error 1
make[1]: *** [net/core] Error 2
make: *** [net] Error 2
So #include sysctl.h from inetdevice.h.
Signed-off-by: Satyam Sharma <satyam.sharma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yasuyuki Kozakai [Fri, 22 Jun 2007 21:10:22 +0000 (14:10 -0700)]
[NETFILTER]: nfctnetlink: Don't allow to change helper
There is no realistic situation to change helper (Who wants IRC helper to
track FTP traffic ?). Moreover, if we want to do that, we need to fix race
issue by nfctnetlink and running helper. That will add overhead to packet
processing. It wouldn't pay. So this rejects the request to change
helper. The requests to add or remove helper are accepted as ever.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Jerome Borsboom [Fri, 22 Jun 2007 21:08:17 +0000 (14:08 -0700)]
[NETFILTER]: nf_conntrack_sip: add missing message types containing RTP info
Signed-off-by: Jerome Borsboom <j.borsboom@erasmusmc.nl> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 22 Jun 2007 18:11:33 +0000 (11:11 -0700)]
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
Blackfin arch: add proper const volatile to addr argument to the read functions
Blackfin arch: Add definition of dma_mapping_error
Blackfin arch: move cond_syscall() behind __KERNEL__ like all other architectures
Blackfin arch: match kernel startup messaage with new linker script
Blackfin arch: add missing braces around array bfin serial init
Blackfin arch: update printk to use KERN_EMERG and reformat crash output
Blackfin arch: update ANOMALY handling
Linus Torvalds [Fri, 22 Jun 2007 18:10:34 +0000 (11:10 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/mlx4: Correct max_srq_wr returned from mlx4_ib_query_device()
IPoIB/cm: Remove dead definition of struct ipoib_cm_id
IPoIB/cm: Fix interoperability when MTU doesn't match
IPoIB/cm: Initialize RX before moving QP to RTR
IB/umem: Fix possible hang on process exit
Linus Torvalds [Fri, 22 Jun 2007 18:10:05 +0000 (11:10 -0700)]
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[AF_RXRPC]: Return the number of bytes buffered in rxrpc_send_data()
[IPVS]: Fix state variable on failure to start ipvs threads
[XFRM]: Fix MTU calculation for non-ESP SAs
Arjan van de Ven [Thu, 21 Jun 2007 05:23:21 +0000 (22:23 -0700)]
Allow DEBUG_RODATA and KPROBES to co-exist
Do not mark the kernel text read only if KPROBES is in the kernel;
kprobes needs to hot-patch the kernel text to insert it's
instrumentation.
In this case, only mark the .rodata segment as read only.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Tested-by: S. P. Prasanna <prasanna@in.ibm.com> Cc: Andi Kleen <ak@suse.de> Cc: William Cohen <wcohen@redhat.com> Cc: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Thu, 21 Jun 2007 20:45:15 +0000 (20:45 +0000)]
posix-timers: Prevent softirq starvation by small intervals and SIG_IGN
posix-timers which deliver an ignored signal are currently rearmed in
the timer softirq: This is necessary because the timer needs to be
delivered again when SIG_IGN is removed. This is not a problem, when
the interval is reasonable.
With high resolution timers enabled one might arm a posix timer with a
very small interval and ignore the signal. This might lead to a
softirq starvation when the interval is so small that the timer is
requeued onto the softirq pending list right away.
This problem was pointed out by Jan Kiszka. Thanks Jan !
The correct solution would be to stop the timer, when the signal is
ignored and rearm it when SIG_IGN is removed. Unfortunately this
requires modification in sigaction and involves non trivial sighand
locking. It's too late in the release cycle for such a change.
For now we just keep the timer running and enforce that the timer only
fires every jiffie. This does not break anything as we keep the
overrun counter correct. It adds a little inaccuracy to the
timer_gettime() interface, but...
The more complex change is necessary anyway to fix another short
coming of the current implementation, which I discovered while looking
at this problem: A pending signal is discarded when SIG_IGN is set. In
case that a posixtimer signal is pending then it is discarded as well,
but when SIG_IGN is removed later nothing rearms the timer. This is
not new, it's that way since posix timers have been merged. So nothing
to worry about right now.
I have a working solution to fix all of this, but the impact is too
large for both stable and 2.6.22. I'm going to send it out for review
in the next days.
This should go into 2.6.21.stable as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Stable Team <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Thu, 21 Jun 2007 22:27:45 +0000 (23:27 +0100)]
page_mapping must avoid slub pages
Nicolas Ferre reports oops from flush_dcache_page() on ARM when using
SLUB: which reuses page->mapping as page->slab. The page_mapping()
function, used by ARM and PA-RISC flush_dcache_page() implementations,
must not confuse SLUB pages with those which have page->mapping set.
Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randolph Chung [Tue, 12 Jun 2007 06:27:32 +0000 (14:27 +0800)]
[PARISC] unwinder improvements
Add special-case handling for "handle_interruption" so that we can rewind
past the interruption. This is useful for seeing what caused a BUG() or
WARN_ON(); otherwise the unwind stops at the interruption.
Helge Deller [Tue, 19 Dec 2006 18:28:33 +0000 (19:28 +0100)]
[PARISC] Handle wrapping in expand_upwards()
Function expand_upwards() did not guarded against wrapping
around to address 0. This fixes the adjtimex02 testcase from
the Linux Test Project on a 32bit PARISC kernel.
[expand_upwards is only used on parisc and ia64; it looks like it does
the right thing on both. --kyle]
Jack Morgenstein [Thu, 21 Jun 2007 20:39:10 +0000 (13:39 -0700)]
IB/mlx4: Correct max_srq_wr returned from mlx4_ib_query_device()
We need to keep a spare entry in the SRQ so that there always is a
next WQE available when posting receives (so that we can tell the
difference between a full queue and an empty queue). So subtract 1
from the value HW gives us before reporting the limit on SRQ entries
to consumers.
Found by Mellanox QA.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
IPoIB/cm: Fix interoperability when MTU doesn't match
IPoIB connected mode currently rejects a connection request unless the
supported MTU is >= the local netdevice MTU. This breaks
interoperability with implementations that might have tweaked
IPOIB_CM_MTU, and there's real no longer a reason to do so: this test
is just a leftover from when we did not tweak MTU per-connection. Fix
this by making the test as permissive as possible.
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Fix a crasher bug in IPoIB CM: once a QP is in the RTR state, a
receive completion (or even an asynchronous error) might be observed
on this QP, so we have to initialize all of our receive data
structures before moving to the RTR state.
As an optimization (since modify_qp might take a long time), the
jiffies update done when moving RX to the passive_ids list is also
left in place to reduce the chance of the RX being misdetected as
stale.
This fixes bug <https://bugs.openfabrics.org/show_bug.cgi?id=662>.
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Roland Dreier [Thu, 21 Jun 2007 18:05:58 +0000 (11:05 -0700)]
IB/umem: Fix possible hang on process exit
If ib_umem_release() is called after ib_uverbs_close() sets context->closing,
then a process can get stuck in a D state, because the code boils down to
if (down_write_trylock(&mm->mmap_sem))
down_write(&mm->mmap_sem);
which is obviously a stupid instant deadlock. Fix the code so that we
only try to take the lock once.
This bug was introduced in commit f7c6a7b5 ("IB/uverbs: Export
ib_umem_get()/ib_umem_release() to modules") which fortunately never
made it into a release, and was reported by Pete Wyckoff <pw@osc.edu>.
Wang Zhenyu [Thu, 21 Jun 2007 05:43:18 +0000 (13:43 +0800)]
[AGPGART] intel_agp: don't load if no IGD and AGP port
After i915 chip, GMCH has no AGP port. Origin bridge driver in device
table will try to access illegal regs like APBASE, APSIZE, etc. This
may cause problem.
So mark them as NULL in the table, we won't load if no IGD got detect
and bridge has no AGP port.
Signed-off-by: Wang Zhenyu <zhenyu.z.wang@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
Linus Torvalds [Thu, 21 Jun 2007 00:11:44 +0000 (17:11 -0700)]
Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
fix module_param mistake in it821x
ahci: fix PORTS_IMPL override
kerneldoc fix in libata
libata: more NONCQ devices
pata_it821x: (partially) fix DMA in RAID mode
PATA: Add the MCP73/77 support to PATA driver
Stas Sergeev [Wed, 20 Jun 2007 18:42:13 +0000 (22:42 +0400)]
fix module_param mistake in it821x
The attached patch fixes a trivial
mistake in a MODULE_PARAM_DESC of pata_it821x
driver. The parameter name in MODULE_PARAM_DESC
should match the one in module_param_named.
Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Tue, 19 Jun 2007 09:52:56 +0000 (18:52 +0900)]
ahci: fix PORTS_IMPL override
If PORTS_IMPL register is zero, ahci initialize it to full mask
corresponding to nr_ports in the CAP register. hpriv->cap, which is
initialized at the end of the function, is incorrectly used as value
of CAP causing ahci to always override PORTS_IMPL to 0x1 if it's zero.
Fix it.
This fixes a bug where early ich6 ahci can only access the first port.
Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Code intended to check DMA status was checking DMA command register.
Moreover firmware seems to "forget" to set DMA capable bit for the
slave device (at least in RAID mode but without ITE RAID volumes) so
check device ID for DMA capable bit when deciding whether to use DMA
and remove DMA status check completely.
Thanks to Pavol Simo for the bugreport and testing the initial fix.
This change unfortunately still doesn't fix DMA in RAID mode (which
works fine with IDE it821x) but Alan is working on the missing pieces
(pata_it821x vs libata EH issues).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Divy Le Ray [Wed, 30 May 2007 17:01:44 +0000 (10:01 -0700)]
cxgb3 - Stop mac RX when changing MTU
Rx traffic needs to be halted when the MTU is changed
to avoid a potential chip hang.
Reset/restore MAC filters around a MTU change.
Also fix the pause frames high materwark setting.
Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tim Mann [Thu, 14 Jun 2007 20:16:38 +0000 (13:16 -0700)]
forcedeth: use unicast receive mode for WoL
I happened to notice that a system with an NVidia NIC using the
forcedeth driver won't wake-on-LAN if the interface was in promiscuous
mode when you power off. By experiment, it looks like
the hardware needs to have NvRegPacketFilterFlags set to
NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR (i.e., receive unicast packets to my
address) in order for WoL to work.
Jeff Garzik writes: "NVIDIA says the patch looks OK." I didn't venture
to insert a signed-off-by line with his name on it, though.
Signed-off-by: Tim Mann <mann@vmware.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
The recent iucv rework patches re-introduced some unnecessary inlines.
Remove them again.
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Ursula Braun [Wed, 20 Jun 2007 11:01:30 +0000 (13:01 +0200)]
s390: don't call iucv_path_connect from tasklet context
net/iucv/iucv.c creates the requirement for
iucv_path_connect not to be called from tasklet context anymore.
An extra checking is added in case of a failing netiucv_tx
to fulfil this requirement for netiucv.
Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Frank Pavlic [Wed, 20 Jun 2007 10:59:14 +0000 (12:59 +0200)]
s390: qeth: wrong packet length in qdio header
Packets Length in qdio header is broken when using
EDDP on Layer2 devices. This leads to skb_under_panic on receiver
system when running on z/VM GuestLAN devices.
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Ursula Braun [Wed, 20 Jun 2007 10:58:02 +0000 (12:58 +0200)]
s390: avoid inconsistent lock state in qeth
ipv6_regen_rndid in net/ipv6/addrconf.c makes use of "write_lock_bh"
for its inet6_dev->lock. It may run in softirq-context.
qeth makes use of "read_lock" for the same inet6_dev->lock.
To avoid a potential deadlock situation, qeth should make use of
"read_lock_bh" for its usages of inet6_dev->lock.
Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Ursula Braun [Wed, 20 Jun 2007 10:56:49 +0000 (12:56 +0200)]
s390: qeth driver does not recover
While first recovery continues, the card issues
a STARTLAN command itself. In this case qeth
schedules another recovery. This second
recovery is cancelled because of an already running first recovery.
Stop first recovery in case of 0xe080.
Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
projects / linux-2.6-omap-h63xx.git / log