fbdev: add fb_read/fb_write functions for framebuffers in system RAM
The functions fb_read() and fb_write in fbmem.c assume that the framebuffer
is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb)
where the framebuffer is allocated from system RAM (via vmalloc). Using
__raw_read/__raw_write (fb_readl/fb_writel) for these drivers is
illegal, especially in other platforms.
Create file read and write methods for these types of drivers. These are
named fb_sys_read() and fb_sys_write().
fbdev: pass struct fb_info to fb_read and fb_write
It is unnecessary to pass struct file to fb_read() and fb_write() in struct
fb_ops. For consistency with the other methods, pass struct fb_info instead.
Signed-off-by: Antonino Daplas <adaplas@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fbdev: add drawing functions for framebuffers in system RAM
The generic drawing functions (cfbimgblt, cfbcopyarea, cfbfillrect) assume
that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb,
arcfb, and vfb) where the framebuffer is allocated from system RAM (via
vmalloc). Using _raw_read/write and family for these drivers (as used in
the cfb* functions) is illegal, especially in other platforms.
Create 3 new drawing functions, based almost entirely from the original
except that the framebuffer memory is assumed to be in system RAM.
These are named as sysimgblt, syscopyarea, and sysfillrect.
Fix a long-standing bug. The mask used to detect a 100Mhz or 133Mhz chipset
is incorrect. (The only side effect of this bug is that it will choose an
incorrect watermark).
fbcon: delay screen update when setting the mode of all consoles
If the current framebuffer console is rotated (rotate != 0), doing an
"fbset -a" will corrupt the current console. Fix by updating the current
console only after all non-visible consoles have been updated.
Allow the saving and restoration of VGA text mode. The state is saved on the
first open and restored on the last close. Because of the VGA registers are
linearly mapped to the MMIO space, MMIO access is used which is not limited to
X86 platforms nor to the primary display device.
An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from
graphics to text mode.
Allow the saving and restoration of VGA text mode. The state is saved on the
first open and restored on the last close. Because of the non-linear mapping
of the VGA registers to the MMIO space, this will be done only on X86
platforms where the device is the primary display.
An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from
graphics to text mode.
VIDEO: add spaces on either side of the case "..." operator
Following the programming advice laid down in the gcc manual, make
sure the case "..." operator has spaces on either side.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jean Delvare [Tue, 8 May 2007 07:38:20 +0000 (00:38 -0700)]
rivafb/nvidiafb: Various cleanups
Various cleanups to rivafb/nvidiafb's I2C code:
* Drop useless par->bus.
* Refactor I2C bus deletion code.
* Drop useless variable initialization.
* Remove unneeded include of <linux/i2c-id.h>.
* Simplify +1/-1.
* Add __devinit tags where possible.
[adaplas]
The varible initialization are not useless. However, rivafb must
check if i2c bus are created properly before reading the EDID
block.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fbdev: don't show logo if driver or fbcon are modular
It was always intended for the logo to be drawn only if both fbcon and the
driver that is mapped to it are both compiled statically. Currently, if fbcon
is loaded prior to the driver, the logo is not shown. Reverse the order, and
the code may attempt to draw the logo which is __initdata. By accident, this
bug is rarely seen because this method of loading the modules is not common
and secondly, a code in fb_prepare_logo() that checks the height of the logo
(now a random value) rarely succeeds.
Fix by drawing the logo only if both fbcon and the driver are statically
compiled.
Signed-off-by: Antonino Daplas <adaplas@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vt: expose system-wide UTF-8 default setting via sysfs
Create a variable, default_utf8, that defines the system-wide default UTF-8
setting. This variable can be altered via sysfs. If the variable is properly
set, this should mimimize breakage of UTF-8 encoded consoles when doing a
reset or echo -e '\033c' and of newly opened/allocated consoles.
This is based from patches by Jan Engelhardt and Paul LeoNerd Evans.
Signed-off-by: Antonino Daplas <adaplas@gmail.com> Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Cc: Paul LeoNerd Evans <leonerd@leonerd.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the cursor and echo are disabled on the current console, pressing a
key will cause a black rectangle to be painted in the cursor's position.
Fix this by not touching the framebuffer in fbcon_cursor() when the
cursor is off.
Signed-off-by: Michal Januszewski <spock@gentoo.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Petr Vandrovec [Tue, 8 May 2007 07:38:02 +0000 (00:38 -0700)]
nvidiafb: Fix reversed DDC port
After I added some debugging printks I've found that code became a bit
confused because it believed that primary monitor is 1920x540, but later it
found in CRTC0's registers that panel size is 1920x1200 (Windows also agree
that 1920x1200 is primary monitor, and 1920x1080i secondary one).
When I applied attached patch then my monitor became as happy as it was
before I connected HDMI cable to secondary output.
Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fb_do_show_logo() updates:
- Use width and height of the passed image instead of the global variable
fb_logo
- Explicitly pass the number of logos to draw
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-By: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
James Simmons [Tue, 8 May 2007 07:37:50 +0000 (00:37 -0700)]
tgafb accelerated code
Add accelerated panning and accelerated color and mono image drawing.
Please apply.
Signed-off-by: James Simmons <jsimmons@infradead.org> Acked-by: Maciej W. Rozycki <macro@linux-mips.org> (tested, too!) Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is support for the TC variations of the TGA boards (properly known as
SFB+ or Smart Frame Buffer Plus boards). The 8-plane SFB+ board uses the
Bt459 RAMDAC (unlike its PCI TGA counterpart, which uses the Bt485), so
bits have been added to support this chip as well.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: James Simmons <jsimmons@infradead.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Tue, 8 May 2007 07:37:45 +0000 (00:37 -0700)]
drivers/video/hecubafb.c: make 4 functions static
This patch makes the following needlessly global functions static:
- hcb_wait_for_ack()
- hcb_wait_for_ack_clear()
- apollo_send_data()
- apollo_send_command()
Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Mundt [Tue, 8 May 2007 07:37:41 +0000 (00:37 -0700)]
fb: fsync() method for deferred I/O flush.
There are cases when we do not want to wait on the delay for automatically
updating the "real" framebuffer, this implements a simple ->fsync() hook
for explicitly flushing the deferred I/O work. The ->page_mkwrite()
handler will rearm the work queue normally.
Jaya Kumar [Tue, 8 May 2007 07:37:37 +0000 (00:37 -0700)]
fbdev: mm: Deferred IO support
This implements deferred IO support in fbdev. Deferred IO is a way to delay
and repurpose IO. This implementation is done using mm's page_mkwrite and
page_mkclean hooks in order to detect, delay and then rewrite IO. This
functionality is used by hecubafb.
[adaplas]
This is useful for graphics hardware with no directly addressable/mappable
framebuffer. Implementing this will allow the "framebuffer" to be accesible
from user space via mmap().
fbdev: ignore VESA modes if framebuffer is disabled
If the option vga=<VESA graphics mode> is added to the boot parameter, it will
activate graphics mode, but without any framebuffer support, the user is left
with an unusable display.
Change the behavior such that the user is instead prompted for another mode
(ala vga=ask).
NOTE: People can always use vbetool to set a graphics mode if this is really
desired, but the number of people doing this approaches zero.
Make nvidiafb use fb_ddc_read(). This patch was submitted before but was
reverted due to problems in a non-x86 platform. This includes a fix for that
where ddc reading is bypassed if there is no DDC bus (duh).
fbdev: add Ultrasharp UXGA to broken monitor database
This particular monitor does not have a limits block and has only one set of
monitor timings. Fix by adding a limits block to the EDID and extend the
horizontal sync frequency range to 30 kHz and 75 Khz.
James Simmons [Tue, 8 May 2007 07:37:15 +0000 (00:37 -0700)]
fbdev: display class
Add the new display class. This is meant to unite the various solutions to
display units ie acpi output device, auxdisplay and the defunct lcd class
in the backlight directory.
Signed-off-by: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prarit Bhargava [Tue, 8 May 2007 07:37:10 +0000 (00:37 -0700)]
change rivafb_remove to __devexit
Change rivafb_remove to __deviexit to fix MODPOST warnings:
WARNING: drivers/video/riva/rivafb.o - Section mismatch: reference to
.exit.text:rivafb_remove from .data.rel.local after 'rivafb_driver' (at offset 0x28)
Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have a problem with blanking. The soundcard uses speakers of the monitor.
Sound is muted when the screen blanks due to a bug in aty128fb.c.
Here is a fragment of linux/fb.h
/* VESA Blanking Levels */
#define VESA_NO_BLANKING 0
#define VESA_VSYNC_SUSPEND 1
#define VESA_HSYNC_SUSPEND 2
#define VESA_POWERDOWN 3
enum {
/* screen: unblanked, hsync: on, vsync: on */
FB_BLANK_UNBLANK = VESA_NO_BLANKING,
/* screen: blanked, hsync: on, vsync: on */
FB_BLANK_NORMAL = VESA_NO_BLANKING + 1,
/* screen: blanked, hsync: on, vsync: off */
FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
So FB_BLANK_NORMAL is 1, FB_BLANK_VSYNC_SUSPEND is 2,
FB_BLANK_HSYNC_SUSPEND is 3, FB_BLANK_POWERDOWN is 4.
And now:
blank = FB_BLANK_NORMAL (1)
blank & FB_BLANK_HSYNC_SUSPEND (1 & 3) is true,
so normal blank caused hsync suspend and sound is muted.
Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby [Tue, 8 May 2007 07:36:46 +0000 (00:36 -0700)]
Char: cyclades, simplify variables initialization
- do not init static variables to 0
- simplify cy_init_card -- use memset(0) and do not zero each element
separately, also reorder init, so that same entries are inited at one
place
Bjorn Helgaas [Tue, 8 May 2007 07:36:07 +0000 (00:36 -0700)]
x86, serial: convert legacy COM ports to platform devices
Make x86 COM ports into platform devices and don't probe for them
if we have PNP.
This prevents double discovery, where a device was found both by
the legacy probe and by 8250_pnp, e.g.,
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
This also means IRDA devices without a UART PNP ID will no longer be
claimed by the serial driver, which might require changes in IRDA
drivers and administration.
In addition to this patch, you may need to configure a setserial init
script, e.g., /etc/init.d/setserial, so it doesn't poke legacy UART
stuff back in. On Debian, "dpkg-reconfigure setserial" with the "kernel"
option does this.
To force the old legacy probe behavior even when we have PNPBIOS or
ACPI, load the new legacy_serial module (or build 8250 static) with
the "legacy_serial.force" option.
[akpm@linux-foundation.org: fix makefiles] Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Keith Owens <kaos@ocs.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu CASTET <castet.matthieu@free.fr> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Russell King <rmk+serial@arm.linux.org.uk> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6-omap-h63xx.git / log