* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
ucc_geth: use correct UCCE macros
net_dma: acquire/release dma channels on ifup/ifdown
cxgb3: Keep LRO off if disabled when interface is down
sfc: SFT9001: Fix condition for LNPGA power-off
dccp ccid-3: Fix RFC reference
smsc911x: register irq with device name, not driver name
smsc911x: fix smsc911x_reg_read compiler warning
forcedeth: napi schedule lock fix
net: fix section mismatch warnings in dccp/ccids/lib/tfrc.c
forcedeth: remove mgmt unit for mcp79 chipset
qlge: Remove dynamic alloc of rx ring control blocks.
qlge: Fix schedule while atomic issue.
qlge: Remove support for device ID 8000.
qlge: Get rid of split addresses in hardware control blocks.
qlge: Get rid of volatile usage for shadow register.
forcedeth: version bump and copyright
forcedeth: xmit lock fix
netdev: missing validate_address hooks
netdev: add missing set_mac_address hook
netdev: gianfar: add MII ioctl handler
...
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc: Fix asm/signal.h for 32-bit.
sparc: Eliminate PROMLIB_INTERNAL as it does nothing
sparc: Kill exports of prom internal functions
sparc64: move EXPORT_SYMBOL to the symbols definition
sparc: move EXPORT_SYMBOL to the symbols definition
sparc: Create a new file lib/ksyms.c and add export of all symbols defined in assembler in lib/ to this file.
sparc: Most unaligned_64.c tweaks for branch tracer warnings.
sparc: Fix sun4d_irq.c build.
sparc: Update 32-bit defconfig.
sparc64: fix warnings in psycho_common after ull conversion
Linus Torvalds [Mon, 12 Jan 2009 23:57:34 +0000 (15:57 -0800)]
Merge branch 'for_2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6
* 'for_2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6:
Fix small typo
misdn: indentation and braces disagree - add braces
misdn: one handmade ARRAY_SIZE converted
drivers/isdn/hardware/mISDN: move a dereference below a NULL test
indentation & braces disagree - add braces
Make parameter debug writable
BUGFIX: used NULL pointer at ioctl(sk,IMGETDEVINFO,&devinfo) when devinfo.id not registered
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
[WATCHDOG] Pika Warp appliance watchdog timer
[WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610
[WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timer
[WATCHDOG] wm8350: Fix section annotations
Linus Torvalds [Mon, 12 Jan 2009 23:53:58 +0000 (15:53 -0800)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
Revert "cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write"
x86: fix apic.c build error on latest git
x86: fix mpparse.c build error on latest git
x86: avoid theoretical vmalloc fault loop
x86, mtrr: fix types used in userspace exported header
Linus Torvalds [Mon, 12 Jan 2009 23:53:02 +0000 (15:53 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - Use own workqueue
ALSA: hda - add support for Intel DX58SO board
ASoC: TWL4030: Module unloading fix
ALSA: hda - create hda_codec.control_mutex for kcontrol->private_value
ALSA: caiaq - Version 1.3.10
ALSA: hda - Add quirk for Dell Inspiron Mini9
ALSA: caiaq - Fix Oops with MIDI
ASoC: TWL4030: Change the soc_value_enum back to soc_enum
ASoC: Merge the soc_value_enum to soc_enum struct
ALSA: hda - Add quirks for Acer Aspire 5930G and 6930G
ALSA: hda - Add codec ID for MCP73 HDMI
ALSA: hda - Fix typos for AD1882 codecs
ALSA: hda - Add quirk for HP 2230s
Martyn Welch [Mon, 10 Nov 2008 12:31:33 +0000 (12:31 +0000)]
[WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610
Support for the FPGA based watchdog timer on GE Fanuc's SBC610.
This patch enables one of the watchdog timers found on the SBC610. There are
two identical watchdog timers at different offsets in the above mentioned
boards, however the current driver is only capable of supporting one of them.
The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Martyn Welch [Mon, 10 Nov 2008 12:31:26 +0000 (12:31 +0000)]
[WATCHDOG] Basic support for GE Fanuc's FPGA based watchdog timer
GE Fanuc SBC610
Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310,
SBC610 and PPC9A Single Board Computers.
This patch adds support for the watchdog timer found in one of the devices
FPGAs. There are two identical watchdog timers at different offsets in the
above mentioned boards, this driver is capable of supporting one of them.
The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
warning: ignoring return value of 'device_register', declared with attribute
warn_unused_result
warning: ignoring return value of 'device_create_file', declared with
attribute warn_unused_result
warning: ignoring return value of 'device_register', declared with attribute
warn_unused_result
warning: ignoring return value of 'device_create_file', declared with
attribute warn_unused_result
m68k: Kill several external declarations in source files
- Replace external declarations by proper includes where availiable.
The accesses to some symbols had to be modified, as before they were
declared using e.g. "extern int _end", while asm-generic/sections.h uses
e.g. "extern char _end[]"
- Remove unused or superfluous external declarations
Andreas Bombe [Wed, 10 Dec 2008 01:02:19 +0000 (02:02 +0100)]
m68k: amiflop - Get rid of sleep_on calls
Apart from sleep_on() calls that could be easily converted to
wait_event() and completion calls amiflop also used a flag in ms_delay()
and ms_isr() as a custom mutex for ms_delay() without a need for
explicit unlocking. I converted that to a standard mutex.
The replacement for the unconditional sleep_on() in fd_motor_on() is a
complete_all() together with a INIT_COMPLETION() before the mod_timer()
call. It appears to me that fd_motor_on() might be called concurrently
and fd_select() does not guarantee mutual exclusivity in the case the
same drive gets selected again.
- Improve comments and naming
- Convert macros to static inline functions
- Remove superfluous `break' after `return'
- Make sure we get a build-time error (undefined reference to
'c2p_unsupported') in case of future misuse
- Replace `unsigned long' by `u32' in comp(), as that's what all callers use
- Use {get,put}_unaligned_be32() in store_planar{,_masked}()
- Use void * for arbitrary pointers
- Use a union to represent pixels/words, to avoid casts
- 16 bpp must use the cfb_*() ops
- 16 bpp needs to set up info->pseudo_palette[] (was fbcon_cfb16_cmap[] in
2.4.x)
- Kill commented out 2.4.x fbcon remnants
- Make sure par->next_line is always set (this was done for Falcon only),
as all the text console drawing operations need a valid par->next_line,
- Make sure fix->line_length is always set, as some userspace applications
need it because they don't have fallback code for the case where it's zero.
Dieter Ries reported bootup soft-hangs and bisected it back to
this commit, and reverting this commit gave him a working system.
The commit introduces work_on_cpu() use into the cpufreq code,
but that is subtly problematic from a lock hierarchy POV: the
hotplug-cpu lock is an highlevel lock that is taken before
lowlevel locks, and in this codepath we are called with the
policy lock taken.
Dieter did not have lockdep enabled so we dont have a nice stack
trace proof for this, but using work_on_cpu() in such a lowlevel
place certainly looks wrong, so we revert the patch.
work_on_cpu() needs to be reworked to be more generally usable.
Here the intention is to get the pgd corresponding to the current process
and sync it up with the pgd in init_mm(obtained from pgd_offset_k).
However, for kernel threads current->mm is NULL and hence pgd =
pgd_offset(init_mm, address) = pgd_ref which means the fault handler
returns without setting the pgd entry in the MM structure in the context
of which the kernel thread has faulted. This could lead to never-ending
faults and busy looping of kernel threads like pdflush. So, shouldn't the
pgd = pgd_offset(current->mm ?: &init_mm, address); be pgd =
pgd_offset(current->active_mm ?: &init_mm, address);
We can use active_mm unconditionally because it should be always set.
Takashi Iwai [Mon, 12 Jan 2009 09:09:24 +0000 (10:09 +0100)]
ALSA: hda - Use own workqueue
snd-hda-intel driver used schedule_work() fot the delayed DMA pointer
updates, but this has several potential problems:
- it may block other eventsd works longer
- it may deadlock when probing fails and flush_scheduled_work() is
called during probe callback (as probe callback itself could be
invoked from eventd)
This patch adds an own workq for each driver instance to solve these
problems.
powerpc: Fix cpufreq drivers after cpufreq core changes
This updates the cpufreq drivers in arch/powerpc so they build again
after the core cpufreq changes that broke them in commit
in835481d9bcd65720b473db6b38746a74a3964218.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Timur Tabi [Sun, 11 Jan 2009 08:25:21 +0000 (00:25 -0800)]
ucc_geth: use correct UCCE macros
The UCC Event Register (UCCE) already has unambigous macro definitions in qe.h,
so we should not be defining our own in the UCC Ethernet driver.
Removed unused local variable 'dev' from ucc_geth_poll(), which fixes
a warning caused by commit 908a7a16b852ffd618a9127be8d62432182d81b4
("net: Remove unused netdev arg from some NAPI interfaces.").
Replaced in_be/out_be pairs with setbits32 or clrbits32, where applicable.
Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Williams [Sun, 11 Jan 2009 08:20:39 +0000 (00:20 -0800)]
net_dma: acquire/release dma channels on ifup/ifdown
The recent dmaengine rework removed the capability to remove dma device
driver modules while net_dma is active. Rather than notify
dmaengine-clients that channels are trying to be removed, we now rely on
clients to notify dmaengine when they no longer have a need for
channels. Teach net_dma to release channels by taking dmaengine
references at netdevice open and dropping references at netdevice close.
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Roland Dreier [Sun, 11 Jan 2009 08:19:36 +0000 (00:19 -0800)]
cxgb3: Keep LRO off if disabled when interface is down
I have a system with a Chelsio adapter (driven by cxgb3) whose ports are
part of a Linux bridge. Recently I updated the kernel and discovered
that things stopped working because cxgb3 was doing LRO on packets that
were passed into the bridge code for forwarding. (Incidentally, this
problem manifested itself in a strange way that made debugging a bit
interesting -- for some reason, the skb_warn_if_lro() check in bridge
didn't trigger and these LROed packets were forwarded out a forcedeth
interface, and caused the forcedeth transmit path to get stuck)
This is because cxgb3 has no way of keeping state for the LRO flag until
the interface is brought up, so if the bridging code disables LRO while
the interface is down, then cxgb3_up() will just reenable LRO, and on my
Debian system at least, the init scripts add interfaces to a bridge
before bringing the interfaces up.
Fix this by keeping track of each interface's LRO state in cxgb3 so that
when bridge disables LRO, it stays disabled in cxgb3_up() when the
interface is brought up. I did this by changing the rx_csum_offload
flag into a pair of bit flags; the effect of this on the rx_eth() fast
path is miniscule enough that it should be fine (eg on x86, a cmpb
instruction becomes a testb instruction).
Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ayaz Abdulla [Sun, 11 Jan 2009 08:09:04 +0000 (00:09 -0800)]
forcedeth: napi schedule lock fix
This patch fixes a potential race condition between scheduling napi and
completing napi poll. The call to netif_rx_schedule should be under
protection of the lock (as is the completion), otherwise, interrupts
could be masked off.
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Leonardo Potenza [Sat, 10 Jan 2009 07:06:28 +0000 (23:06 -0800)]
net: fix section mismatch warnings in dccp/ccids/lib/tfrc.c
Removed the __exit annotation of tfrc_lib_exit(), in order to suppress the following section mismatch messages:
WARNING: net/dccp/dccp.o(.text+0xd9): Section mismatch in reference from the function ccid_cleanup_builtins() to the function .exit.text:tfrc_lib_exit()
The function ccid_cleanup_builtins() references a function in an exit section.
Often the function tfrc_lib_exit() has valid usage outside the exit section
and the fix is to remove the __exit annotation of tfrc_lib_exit.
WARNING: net/dccp/dccp.o(.init.text+0x48): Section mismatch in reference from the function ccid_initialize_builtins() to the function .exit.text:tfrc_lib_exit()
The function __init ccid_initialize_builtins() references
a function __exit tfrc_lib_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
tfrc_lib_exit() so it may be used outside an exit section.
Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Ayaz Abdulla [Fri, 9 Jan 2009 11:03:44 +0000 (11:03 +0000)]
forcedeth: xmit lock fix
This patch fixes a potential race condition between xmit thread and xmit
completion thread. The calculation of empty tx descriptors is not
performed under the lock. This could cause it to set the stop flag while
the completion thread finishes all tx's. This will result in the tx
queue in stopped state and no one to wake it up.
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Clifford Wolf [Fri, 9 Jan 2009 10:23:11 +0000 (10:23 +0000)]
netdev: gianfar: add MII ioctl handler
This is the same kind of wrapper that can also be found in many
other network device drivers.
Tested with a freescale MPC8349E host CPU:
Toggled the interface LEDs on a DP83865 PHY.
Signed-off-by: Clifford Wolf <clifford@clifford.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Fri, 9 Jan 2009 10:23:10 +0000 (10:23 +0000)]
drivers/net/wireless/libertas: move a dereference below a NULL test
In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test. I have also taken advantage of the availability
of the value of priv->dev in the subsequent calls to netif_stop_queue and
netif_carrier_off.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
wimax: fix typo in kernel-doc for debugfs_dentry in struct wimax_dev
The kernel-doc was referring to member @debufs_dentry instead of
@debugfs_dentry.
Reported by Randy Dunlap http://marc.info/?l=linux-netdev&m=123147942302885&w=2
As well, escape the colon in the field's text description, as it is
causing the generated text to be erraticly broken up (with paragraphs
moved down). Could not find a reason why it is happening so, even when
other field descriptions use colons and work as expected.
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Since dev->power.should_wakeup bit is used by the PCI core to
decide whether the device should wake up the system from sleep
states, set this bit by calling device_set_wakeup_enable().
This restores proper WOL for the 3c59x driver.
Reported-and-tested-by: Graeme Wilford <gwilford@gmail.com> Reported-by: Gunnar Degnbol <degnbol@danbbs.dk> Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Name interrupt vectors according to the new naming standard, by Robert
Olsson and DaveM.
The qlge driver were very close to the new standard, thus the change
is kind of trivial.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Fri, 9 Jan 2009 02:39:57 +0000 (02:39 +0000)]
b44: fix misalignment and wasted space in rx handling
Broadcom 4400 puts a header of configurable size (apparently needs
to be at least 28 bytes) in front of received packets. When handling
this, the previous code accidentally added the offset 30 *twice* for
the software and once for the hardware, thereby cancelling out the
IP alignment effect of the 30 byte padding and wasting an additional
30 bytes of memory per packet.
This patch fixes this problem and improves routing throughput by
about 30% on MIPS, where unaligned access is expensive.
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Thu, 8 Jan 2009 21:27:06 +0000 (21:27 +0000)]
ipcomp: Remove spurious truesize increase
When I made ipcomp use frags, I forgot to take out the original
truesize update that was added for pskb_expand_head. As we no
longer expand the head of skb, that update should have been removed.
This bug is not related to the truesize warnings since we only
made it bigger than what it should've been.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
David Graham [Thu, 8 Jan 2009 16:03:29 +0000 (16:03 +0000)]
e1000e: Add process name to WARN message when detecting Mutex contention
Adds process name of the current mutex holder to the WARN message output
when the e1000e driver attempts to acquire the nvm_mutex and finds that
it is already being held. With this patch the WARN message indicates
both the process name of the current mutex holder and the process name of
the attempted acquisition, which together will help to identify the
contending codepaths.
Signed-off-by: David Graham <david.graham@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 10 Jan 2009 07:19:26 +0000 (23:19 -0800)]
r6040: fix ifconfig down and freeing of tx/rx descriptors
This patch fixes warnings and such traces that appear when doing
an ifconfig down on the interface:
WARNING: at arch/x86/kernel/pci-dma.c:376 dma_free_coherent+0x40/0x7d()
Modules linked in:
Signed-off-by: Joe Chou <joe.chou@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-2.6-omap-h63xx.git / log