[NETFILTER]: ctnetlink: add support for master tuple event notification and dumping
This patch adds support for master tuple event notification and
dumping. Conntrackd needs this information to recover related
connections appropriately.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
[NETFILTER]: ctnetlink: add support for NAT sequence adjustments
The combination of NAT and helpers may produce TCP sequence adjustments.
In failover setups, this information needs to be replicated in order to
achieve a successful recovery of mangled, related connections. This patch is
particularly useful for conntrackd, see:
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin LaHaise [Tue, 18 Dec 2007 06:27:36 +0000 (22:27 -0800)]
[NETFILTER]: xt_TCPMSS: don't allow netfilter --setmss to increase mss
When terminating DSL connections for an assortment of random customers, I've
found it necessary to use iptables to clamp the MSS used for connections to
work around the various ICMP blackholes in the greater net. Unfortunately,
the current behaviour in Linux is imperfect and actually make things worse,
so I'm proposing the following: increasing the MSS in a packet can never be
a good thing, so make --set-mss only lower the MSS in a packet.
Yes, I am aware of --clamp-mss-to-pmtu, but it doesn't work for outgoing
connections from clients (ie web traffic), as it only looks at the PMTU on
the destination route, not the source of the packet (the DSL interfaces in
question have a 1442 byte MTU while the destination ethernet interface is
1500 -- there are problematic hosts which use a 1300 byte MTU). Reworking
that is probably a good idea at some point, but it's more work than this is.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 18 Dec 2007 05:47:32 +0000 (21:47 -0800)]
[NETFILTER]: ip_tables: fix compat types
Use compat types and compat iterators when dealing with compat entries for
clarity. This doesn't actually make a difference for ip_tables, but is
needed for ip6_tables and arp_tables.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Patrick McHardy [Tue, 18 Dec 2007 05:47:14 +0000 (21:47 -0800)]
[NETFILTER]: ip_tables: account for struct ipt_entry/struct compat_ipt_entry size diff
Account for size differences when dumping entries or calculating the
entry positions. This doesn't actually make any difference for IPv4
since the structures have the same size, but its logically correct
and needed for IPv6.
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Tue, 4 Dec 2007 19:33:40 +0000 (20:33 +0100)]
wireless: make drivers include the TSF RX flag where appropriate
These drivers pass full mactime information to the stack, make them
indicate this via the new RX_FLAG_TSFT to get mac80211 to show this
information in monitor mode.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Williams [Wed, 12 Dec 2007 15:25:07 +0000 (10:25 -0500)]
introduce WEXT scan capabilities
Introduce scan capabilities to WEXT so that userspace can do intelligent
things with scan behavior such as handling hidden SSIDs more gracefully.
If the driver reports a specific scan capability, the driver must
respect the options specified in the iw_scan_req structure when handling
the SIOCSIWSCAN call, unless it's mode or state does not allow it to do
so, in which case it must return an error.
This version switches to Dave Kilroy's suggestion of claiming unused
padding space for the scan_capa field.
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Tue, 11 Dec 2007 20:33:42 +0000 (21:33 +0100)]
mac80211: conditionally include timestamp in radiotap information
This makes mac80211 include the low-level MAC timestamp
in the radiotap header if the driver indicated (by a new
RX flag) that the timestamp is valid.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Mon, 17 Dec 2007 14:58:04 +0000 (12:58 -0200)]
[DCCP]: Remove unused inline function
The function follows48(), which is a special-case of dccp_delta_seqno(),
is nowhere used in the DCCP code, thus removed by this patch.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Mon, 17 Dec 2007 14:57:43 +0000 (12:57 -0200)]
[CCID3]: Nofeedback timer according to rfc3448bis
This implements the changes to the nofeedback timer handling suggested
in draft rfc3448bis00, section 4.4. In particular, these changes mean:
* better handling of the lossless case (p == 0)
* the timestamp for computing t_ld becomes obsolete
* much more recent document (RFC 3448 is almost 5 years old)
* concepts in rfc3448bis arose from a real, working implementation
(cf. sec. 12)
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Mon, 17 Dec 2007 14:48:47 +0000 (12:48 -0200)]
[CCID3]: Implement rfc3448bis changes to feedback reception
This implements the algorithm to update the allowed sending rate X upon
receiving feedback packets, as described in draft rfc3448bis, 4.2/4.3.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Mon, 17 Dec 2007 12:25:06 +0000 (10:25 -0200)]
[CCID3]: Remove two irrelevant states in TX feedback handling
* the NO_SENT state is only triggered in bidirectional mode,
costing unnecessary processing.
* the TERM (terminating) state is irrelevant.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Mon, 17 Dec 2007 12:07:44 +0000 (10:07 -0200)]
[CCID3]: Use a function to update p_inv, and p is never used
This patch
1) concentrates previously scattered computation of p_inv into one function;
2) removes the `p' element of the CCID3 RX sock (it is redundant);
3) makes the tfrc_rx_info structure standalone, only used on demand.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Sun, 16 Dec 2007 22:06:41 +0000 (14:06 -0800)]
[SCTP]: Use crc32c library for checksum calculations.
The crc32c library used an identical table and algorithm
as SCTP. Switch to using the library instead of carrying
our own table. Using crypto layer proved to have too
much overhead compared to using the library directly.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sun, 16 Dec 2007 22:04:02 +0000 (14:04 -0800)]
[PACKET]: Fix /proc/net/packet crash due to bogus private pointer
The seq_open_net patch changed the meaning of seq->private.
Unfortunately it missed two spots in AF_PACKET, which still
used the old way of dereferencing seq->private, thus causing
weird and wonderful crashes when reading /proc/net/packet.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Sun, 16 Dec 2007 21:32:48 +0000 (13:32 -0800)]
[IPV4]: Switch users of ipv4_devconf(_all) to use the pernet one
These are scattered over the code, but almost all the
"critical" places already have the proper struct net
at hand except for snmp proc showing function and routing
rtnl handler.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Sun, 16 Dec 2007 21:31:14 +0000 (13:31 -0800)]
[IPV4]: Store the net pointer on devinet's ctl tables
Some handers and strategies of devinet sysctl tables need
to know the net to propagate the ctl change to all the
net devices.
I use the (currently unused) extra2 pointer on the tables
to get it.
Holding the reference on the struct net is not possible,
because otherwise we'll get a net->ctl_table->net circular
dependency. But since the ctl tables are unregistered during
the net destruction, this is safe to get it w/o additional
protection.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Sun, 16 Dec 2007 21:30:39 +0000 (13:30 -0800)]
[IPV4]: Pass the net pointer to the arp_req_set_proxy()
This one will need to set the IPV4_DEVCONF_ALL(PROXY_ARP), but
there's no ways to get the net right in place, so we have to
pull one from the inet_ioctl's struct sock.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Sun, 16 Dec 2007 21:30:07 +0000 (13:30 -0800)]
[IPV4]: Make __devinet_sysctl_register return an error
Currently, this function is void, so failures in creating
sysctls for new/renamed devices are not reported to anywhere.
Fixing this is another complex (needed?) task, but this
return value is needed during the namespaces creation to
handle the case, when we failed to create "all" and "default"
entries.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov [Fri, 14 Dec 2007 19:38:04 +0000 (11:38 -0800)]
[XFRM]: Fix potential race vs xfrm_state(only)_find and xfrm_hash_resize.
The _find calls calculate the hash value using the
xfrm_state_hmask, without the xfrm_state_lock. But the
value of this mask can change in the _resize call under
the state_lock, so we risk to fail in finding the desired
entry in hash.
I think, that the hash value is better to calculate
under the state lock.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
[PPP] synchronous tty: convert dead_sem to completion
PPP synchronous tty channel driver: convert the semaphore dead_sem to a
completion
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Fri, 14 Dec 2007 19:25:26 +0000 (11:25 -0800)]
[UDP]: Move udp_stats_in6 into net/ipv4/udp.c
Now that external users may increment the counters directly, we need
to ensure that udp_stats_in6 is always available. Otherwise we'd
either have to requrie the external users to be built as modules or
ipv6 to be built-in.
This isn't too bad because udp_stats_in6 is just a pair of pointers
plus an EXPORT, e.g., just 40 (16 + 24) bytes on x86-64.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Fri, 14 Dec 2007 01:37:55 +0000 (23:37 -0200)]
[DCCP]: Introducing CCMPS
This introduces a CCMPS field for setting a CCID-specific upper bound on the application payload
size, as is defined in RFC 4340, section 14.
Only the TX CCID is considered in setting this limit, since the RX CCID generates comparatively
small (DCCP-Ack) feedback packets. The CCMPS field includes network and transport layer header
lengths. The only current CCMPS customer is CCID4 (via RFC 4828).
A wrapper is used to allow querying the CCMPS even at times where the CCID modules may not have
been fully negotiated yet.
In dccp_sync_mss() the variable `mss_now' has been renamed into `cur_mps', to reflect that we are
dealing with an MPS, but not an MSS.
Since the DCCP code closely follows the TCP code, the identifiers `dccp_sync_mss' and
`dccps_mss_cache' have been kept, as they have direct TCP counterparts.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
To allow spaces in the name, the slab name string has been changed to
refer to the numeric CCID identifier, using the same format as before.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Fri, 14 Dec 2007 01:31:14 +0000 (23:31 -0200)]
[DCCP]: Documentation for CCID operations
This adds documentation for the ccid_operations structure.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 13 Dec 2007 17:47:57 +0000 (09:47 -0800)]
[IPV4]: Thresholds in fib_trie.c are used as consts, so make them const.
There are several thresholds for trie fib hash management. They are used
in the code as a constants. Make them constants from the compiler point of
view.
Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Schmidt [Thu, 13 Dec 2007 17:47:00 +0000 (09:47 -0800)]
[IPV6] sit: Rebinding of SIT tunnels to other interfaces
This is similar to the change already done for IPIP tunnels.
Once created, a SIT tunnel can't be bound to another device.
To reproduce:
# create a tunnel:
ip tunnel add tunneltest0 mode sit remote 10.0.0.1 dev eth0
# try to change the bounding device from eth0 to eth1:
ip tunnel change tunneltest0 dev eth1
# show the result:
ip tunnel show tunneltest0
tunneltest0: ipv6/ip remote 10.0.0.1 local any dev eth0 ttl inherit
Notice the bound device has not changed from eth0 to eth1.
This patch fixes it. When changing the binding, it also recalculates the
MTU according to the new bound device's MTU.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Schmidt [Thu, 13 Dec 2007 17:46:32 +0000 (09:46 -0800)]
[IP_GRE]: Rebinding of GRE tunnels to other interfaces
This is similar to the change already done for IPIP tunnels.
Once created, a GRE tunnel can't be bound to another device.
To reproduce:
# create a tunnel:
ip tunnel add tunneltest0 mode gre remote 10.0.0.1 dev eth0
# try to change the bounding device from eth0 to eth1:
ip tunnel change tunneltest0 dev eth1
# show the result:
ip tunnel show tunneltest0
tunneltest0: gre/ip remote 10.0.0.1 local any dev eth0 ttl inherit
Notice the bound device has not changed from eth0 to eth1.
This patch fixes it. When changing the binding, it also recalculates the
MTU according to the new bound device's MTU.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Thu, 13 Dec 2007 17:30:59 +0000 (09:30 -0800)]
[IPSEC]: Fix zero return value in xfrm_lookup on error
Further testing shows that my ICMP relookup patch can cause xfrm_lookup
to return zero on error which isn't very nice since it leads to the caller
dying on null pointer dereference. The bug is due to not setting err
to ENOENT just before we leave xfrm_lookup in case of no policy.
This patch moves the err setting to where it should be.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 13 Dec 2007 14:48:19 +0000 (12:48 -0200)]
[DCCP]: Ignore feature negotiation on Data packets
This implements [RFC 4340, p. 32]: "any feature negotiation options received
on DCCP-Data packets MUST be ignored".
Also added a FIXME for further processing, since the code currently (wrongly)
classifies empty Confirm options as invalid - this needs to be resolved in
a separate patch.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 13 Dec 2007 14:41:46 +0000 (12:41 -0200)]
[DCCP]: Make code assumptions explicit
This removes several `XXX' references which indicate a missing support
for non-1-byte feature values: this is unnecessary, as all currently known
(standardised) SP feature values are 1-byte quantities.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 13 Dec 2007 14:40:40 +0000 (12:40 -0200)]
[DCCP]: Remove unused and redundant validation functions
This removes two inlines which were both called in a single function only:
1) dccp_feat_change() is always called with either DCCPO_CHANGE_L or DCCPO_CHANGE_R as argument
* from dccp_set_socktopt_change() via do_dccp_setsockopt() with DCCP_SOCKOPT_CHANGE_R/L
* from __dccp_feat_init() via dccp_feat_init() also with DCCP_SOCKOPT_CHANGE_R/L.
Hence the dccp_feat_is_valid_type() is completely unnecessary and always returns true.
2) Due to (1), the length test reduces to 'len >= 4', which in turn makes
dccp_feat_is_valid_length() unnecessary.
Furthermore, the inline function dccp_feat_is_reserved() was unfolded,
since only called in a single place.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 13 Dec 2007 14:38:11 +0000 (12:38 -0200)]
[DCCP]: Support inserting options during the 3-way handshake
This provides a separate routine to insert options during the initial handshake.
The main purpose is to conduct feature negotiation, for the moment the only user
is the timestamp echo needed for the (CCID3) handshake RTT sample.
Padding of options has been put into a small separate routine, to be shared among
the two functions. This could also be used as a generic routine to finish inserting
options.
Also removed an `XXX' comment since its content was obvious.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 13 Dec 2007 14:37:19 +0000 (12:37 -0200)]
[DCCP]: Handle timestamps on Request/Response exchange separately
In DCCP, timestamps can occur on packets anytime, CCID3 uses a timestamp(/echo) on the Request/Response
exchange. This patch addresses the following situation:
* timestamps are recorded on the listening socket;
* Responses are sent from dccp_request_sockets;
* suppose two connections reach the listening socket with very small time in between:
* the first timestamp value gets overwritten by the second connection request.
This is not really good, so this patch separates timestamps into
* those which are received by the server during the initial handshake (on dccp_request_sock);
* those which are received by the client or the client after connection establishment.
As before, a timestamp of 0 is regarded as indicating that no (meaningful) timestamp has been
received (in addition, a warning message is printed if hosts send 0-valued timestamps).
The timestamp-echoing now works as follows:
* when a timestamp is present on the initial Request, it is placed into dreq, due to the
call to dccp_parse_options in dccp_v{4,6}_conn_request;
* when a timestamp is present on the Ack leading from RESPOND => OPEN, it is copied over
from the request_sock into the child cocket in dccp_create_openreq_child;
* timestamps received on an (established) dccp_sock are treated as before.
Since Elapsed Time is measured in hundredths of milliseconds (13.2), the new dccp_timestamp()
function is used, as it is expected that the time between receiving the timestamp and
sending the timestamp echo will be very small against the wrap-around time. As a byproduct,
this allows smaller timestamping-time fields.
Furthermore, inserting the Timestamp Echo option has been taken out of the block starting with
'!dccp_packet_without_ack()', since Timestamp Echo can be carried on any packet (5.8 and 13.3).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 13 Dec 2007 14:31:26 +0000 (12:31 -0200)]
[DCCP]: Add (missing) option parsing to request_sock processing
This adds option-parsing code to processing of Acks in the listening state
on request_socks on the server, serving two purposes
(i) resolves a FIXME (removed);
(ii) paves the way for feature-negotiation during connection-setup.
There is an intended subtlety here with regard to dccp_check_req:
Parsing options happens only after testing whether the received packet is
a retransmitted Request. Otherwise, if the Request contained (a possibly
large number of) feature-negotiation options, recomputing state would have to
happen each time a retransmitted Request arrives, which opens the door to an
easy DoS attack. Since in a genuine retransmission the options should not be
different from the original, reusing the already computed state seems better.
The other point is - if there are timestamp options on the Request, they will
not be answered; which means that in the presence of retransmission (likely
due to loss and/or other problems), the use of Request/Response RTT sampling
is suspended, so that startup problems here do not propagate.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 13 Dec 2007 14:29:24 +0000 (12:29 -0200)]
[DCCP]: Allow to parse options on Request Sockets
The option parsing code currently only parses on full sk's. This causes a problem for
options sent during the initial handshake (in particular timestamps and feature-negotiation
options). Therefore, this patch extends the option parsing code with an additional argument
for request_socks: if it is non-NULL, options are parsed on the request socket, otherwise
the normal path (parsing on the sk) is used.
Subsequent patches, which implement feature negotiation during connection setup, make use
of this facility.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 13 Dec 2007 14:27:14 +0000 (12:27 -0200)]
[DCCP]: Collapse repeated `len' statements into one
This replaces 4 individual assignments for `len' with a single
one, placed where the control flow of those 4 leads to.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 13 Dec 2007 14:25:01 +0000 (12:25 -0200)]
[DCCP]: Support for server holding timewait state
This adds a socket option and signalling support for the case where the server
holds timewait state on closing the connection, as described in RFC 4340, 8.3.
Since holding timewait state at the server is the non-usual case, it is enabled
via a socket option. Documentation for this socket option has been added.
The setsockopt statement has been made resilient against different possible cases
of expressing boolean `true' values using a suggestion by Ian McDonald.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 13 Dec 2007 14:16:23 +0000 (12:16 -0200)]
[DCCP]: Use maximum-RTO backoff from DCCP spec
This removes another Fixme, using the TCP maximum RTO rather than the value
specified by the DCCP specification. Across the sections in RFC 4340, 64
seconds is consistently suggested as maximum RTO backoff value; and this is
the value which is now used.
I have checked both termination cases for retransmissions of Close/CloseReq:
with the default value 15 of `retries2', and an initial icsk_retransmit = 0,
it takes about 614 seconds to declare a non-responding peer as dead, after
which the final terminating Reset is sent. With the TCP maximum RTO value of
120 seconds it takes (as might be expected) almost twice as long, about 23
minutes.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 13 Dec 2007 14:02:43 +0000 (12:02 -0200)]
[DCCP]: Shift the retransmit timer for active-close into output.c
When performing active close, RFC 4340, 8.3. requires to retransmit the
Close/CloseReq with a backoff-retransmit timer starting at intially 2 RTTs.
This patch shifts the existing code for active-close retransmit timer
into output.c, so that the retransmit timer is started when the first
Close/CloseReq is sent. Previously, the timer was started when, after
releasing the socket in dccp_close(), the actively-closing side had not yet
reached the CLOSED/TIMEWAIT state.
The patch further reduces the initial timeout from 3 seconds to the required
2 RTTs, where - in absence of a known RTT - the fallback value specified in
RFC 4340, 3.4 is used.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Lezcano [Thu, 13 Dec 2007 13:34:58 +0000 (05:34 -0800)]
[IPV6]: fix section mismatch warnings
Removed useless and buggy __exit section in the different
ipv6 subsystems. Otherwise they will be called inside an
init section during rollbacking in case of an error in the
protocol initialization.
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerrit Renker [Thu, 13 Dec 2007 13:28:43 +0000 (11:28 -0200)]
[DCCP]: Perform SHUT_RD and SHUT_WR on receiving close
This patch performs two changes:
1) Close the write-end in addition to the read-end when a fin-like segment
(Close or CloseReq) is received by DCCP. This accounts for the fact that DCCP,
in contrast to TCP, does not have a half-close. RFC 4340 says in this respect
that when a fin-like segment has been sent there is no guarantee at all that
any further data will be processed.
Thus this patch performs SHUT_WR in addition to the SHUT_RD when a fin-like
segment is encountered.
2) Minor change: I noted that code appears twice in different places and think it
makes sense to put this into a self-contained function (dccp_enqueue()).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-2.6-omap-h63xx.git / log