Sean Hefty [Thu, 1 Sep 2005 16:28:03 +0000 (09:28 -0700)]
[PATCH] IB: Add user-supplied context to userspace CM ABI
- Add user specified context to all uCM events. Users will not retrieve
any events associated with the context after destroying the corresponding
cm_id.
- Provide the ib_cm_init_qp_attr() call to userspace clients of the CM.
This call may be used to set QP attributes properly before modifying the QP.
- Fixes some error handling synchonization and cleanup issues.
- Performs some minor code cleanup.
Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
David Gibson [Tue, 6 Sep 2005 04:59:47 +0000 (14:59 +1000)]
[PATCH] Invert sense of SLB class bit
Currently, we set the class bit in kernel SLB entries, and clear it on
user SLB entries. On POWER5, ERAT entries created in real mode have
the class bit clear. So to avoid flushing kernel ERAT entries on each
context switch, this patch inverts our usage of the class bit, setting
it on user SLB entries and clearing it on kernel SLB entries.
Booted on POWER5 and G5.
Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Al Viro [Tue, 6 Sep 2005 06:35:41 +0000 (23:35 -0700)]
[SPARC64]: Kconfig fix (GEN_RTC dependencies)
Yet another architecture not coverd by GEN_RTC - sparc64 never picked
it until now and it doesn't have asm/rtc.h to go with it, so it
wouldn't compile anyway (or have these ioctls in the user-visible
headers, for that matter).
FWIW, I'm very tempted to introduce ARCH_HAS_GEN_RTC and have it set
in arch/*/Kconfig for architectures that know what to do with this
stuff - for something supposedly generic the list of architectures
where it doesn't work is getting too long...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Al Viro [Tue, 6 Sep 2005 06:30:15 +0000 (23:30 -0700)]
[MOXA]: Fix this driver properly.
Actually, proper fix of that breakage is embarrassingly simple - it's yet
another gratitious leftover include of asm/segment.h, so incremental to the
previos would be removal of that BROKEN and removal of bogus include from
mxser.c itself.
Signed-off-by: David S. Miller <davem@davemloft.net>
[PATCH] ppc64: Allow world readable /proc/ppc64/lparcfg
I would like to be able to read the lparcfg data from any user so we
can make "intelligent" decisions based on underlying attributes when
running in lpars. Yes there's software that likes to do this :) and
runs as non-root.
It's very similar to say VM where you can get CP to provide feedback
of the real hardware inside a VM guest.
Signed-off-by: Wim Coekaerts <wim.coekaerts@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Becky Bruce [Sun, 4 Sep 2005 00:01:57 +0000 (19:01 -0500)]
[PATCH] Move 3 more headers to asm-powerpc
Merged several nearly-identical header files from asm-ppc and asm-ppc64
into asm-powerpc.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
The following patch fixes 2 issues:
1) use PLATFORM_LPAR bit to test if running in LPAR mode
2) systemcfg pointer is assigned from static data in
arch/ppc64/kernel/pacaData.c. The file arch/ppc64/kernel/head.S
now refers to is using the GOT binding to the pointer and hence
must deref it.
Signed-off-by: Jimi Xenidis <jimix@watson.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Milton Miller [Tue, 6 Sep 2005 01:55:00 +0000 (11:55 +1000)]
[PATCH] ppc64: Clean up CR handling
Make the 16550 and real mode 16550 use tail recursion like the scc code
instead of repeating the routine except for the character sent.
Gcc recoginizes the tail recursion and handles it efficently without
stack allocations. The maple real putc shrinks from 188 to 104 bytes
of instructions. udbg_putc drops from 188 to 140 bytes.
Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Herbert Xu [Tue, 6 Sep 2005 01:55:48 +0000 (18:55 -0700)]
[TCP]: Fix TCP_OFF() bug check introduced by previous change.
The TCP_OFF assignment at the bottom of that if block can indeed set
TCP_OFF without setting TCP_PAGE. Since there is not much to be
gained from avoiding this situation, we might as well just zap the
offset. The following patch should fix it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 6 Sep 2005 01:44:37 +0000 (18:44 -0700)]
[NET]: 2.6.13 breaks libpcap (and tcpdump)
Patrick McHardy says:
Never mind, I got it, we never fall through to the second switch
statement anymore. I think we could simply break when load_pointer
returns NULL. The switch statement will fall through to the default
case and return 0 for all cases but 0 > k >= SKF_AD_OFF.
Here's a patch to do just that.
I left BPF_MSH alone because it's really a hack to calculate the IP
header length, which makes no sense when applied to the special data.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 6 Sep 2005 00:53:32 +0000 (17:53 -0700)]
[TG3]: Use status tag to check for new events
Use the status tag to determine if there are new events in
tg3_interrupt_tagged(). We discussed about this a while ago with Grant
Grundler and DaveM. This scheme makes it unnecessary to clear the
updated bit in the status block when using tagged mode, and only
a simple comparison is needed to determine if there are new events.
The tp->lock around netif_rx_complete() and tg3_restart_ints() is also
removed. It is unnecessary with DaveM's new locking scheme.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 6 Sep 2005 00:53:19 +0000 (17:53 -0700)]
[TG3]: Remove status block access in tg3_msi() and add prefetches
Remove unnecessary status block accesses in tg3_msi(). Since MSI is
not shared, it is unnecessary to read the status block to determine if
there are any new events in the MSI handler. It is also unnecessary to
clear the updated bit in the status block.
Since the poll list is per-cpu, tg3_poll() will be scheduled to run on
the same CPU that received the MSI. Prefetches for the status block
and the next rx descriptors are added in tg3_msi() to improve their
access times when tg3_poll() runs.
In the non-MSI irq handlers, we need to check the status block because
interrupts may be shared. Only prefetches for the next rx descriptors
are added.
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Reinecke [Fri, 15 Jul 2005 08:09:25 +0000 (10:09 +0200)]
[PATCH] Floppy: Add cmos attribute to floppy driver
Currently only a device 'fdX' shows up in sysfs; the other possible
device for this drive (like fd0h1440 etc) must be guessed from there.
This patch corrects the floppy driver to create a platform device for
each floppy found; each platform device also has an attribute 'cmos'
which represents the cmos type for this drive. From this attribute the
other possible device types can be computed.
From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[PATCH] Driver core: link device and all class devices derived from it.
Driver core: link device and all class devices derived from it.
To ease the task of locating class devices derived from a certain
device create symlinks from parent device to its class devices.
Change USB host class device name from usbX to usb_hostX to avoid
conflict when creating aforementioned links.
Tweaked by Greg to have the symlink be "class_name:class_device_name" in
order to prevent duplicate links.
Fix for manual binding of drivers to devices. Problem is if you pass in
a valid device id, but the driver refuses to bind. Infinite loop as
write() tries to resubmit the data it just sent.
Thanks to Michal Ostrowski <mostrows@watson.ibm.com> for pointing the
problem out.
Driver for 802.11b cards using RAM-loadable Symbol firmware, such as
Symbol Wireless Networker LA4100, CompactFlash cards by Socket
Communications and Intel PRO/Wireless 2011B.
The driver implements Symbol firmware download. The rest is handled
in hermes.c and orinoco.c.
Utilities for downloading the Symbol firmware are available at
http://sourceforge.net/projects/orinoco/ Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This is a driver for Nortel emobility PCI adaptors, which consist of an
Orinoco compatible PCMCIA card and a simple PCI-to-PCMCIA bridge. The
driver initializes the device and uses Orinoco core driver for actual
wireless networking. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
It is not supported by this driver because it has no firmware in
flash. spectrum_cs is needed for this device. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Change orinoco_translate_scan() to return error code on error.
Adjust the caller to check for errors and clean up if needed. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
mv643xx_eth_get_config_reg() was reading the wrong register.
mv643xx_eth_set_config_reg() was or'ing instead of setting the
register. These functions are trivial and both are called only from
mv643xx_eth_set_rx_mode() when changing to/from promiscuous mode.
Remove both functions and do the operations directly in
mv643xx_eth_set_rx_mode().
Also, maintain promiscuous mode setting across port resets.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This patch corrects the accounting of outstanding tx skbs. It fixes
a bug that causes "Error on Queue Full" messages seen since scatter-gather
was enabled by using the hardware tcp/udp checksum generator.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This patch fixes an skb memory leak under heavy receive load
(whenever the more packets have been received than the NAPI budget
allows to be processed).
Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
The sis191 is the gigabit brother of the sis190. SiS's driver suggests
that the register set is backward compatible: this should hopefully
give a basic driver.
The device should allow the usual features from a modern ethernet
adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far
the relevant register layout is not documented. SiS's driver does
not provide these features either (at least not for Linux).
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
[PATCH] sis190: make 10Mbps the default when handling the StationControl register
This patch does three things:
- widen the access to the StationControl register (note the SIS_W16
versus SIS_W32 change);
- default to 10Mbps half duplex when the LPA can not be evaluated
(reg31->ctl is identical for both). It can be argued that it makes
sense as the lowest common denominator when everything else failed.
Btw it works better than the current code. :o)
- remove some enums: they do not document anymore.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
[PATCH] sis190: recent chipsets from SiS include a RGMII
Extracted from SiS's GPLed driver. From the few pdf available at SiS's,
it seems that the 965 and the 966 south bridge include this interface
whereas the 965L (and anything below) does not. It is expected to be a
sis191 related feature and should not hurt the existing sis190 driver.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Peter Chubb [Sat, 3 Sep 2005 21:05:06 +0000 (14:05 -0700)]
[PATCH] 'mdio_bus_exit' in discarded section .text.exit
When building with CONFIG_PHYLIB=y on Itanium, I see:
`mdio_bus_exit' referenced in section `.init.text' of
drivers/built-in.o: defined in discarded section `.exit.text' of
drivers/built-in.o
I believe that mdio_bus_exit should not be declared __exit, because it is
referencesd from __init sections in, say, phy_init().
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Adrian Bunk [Sat, 3 Sep 2005 21:04:55 +0000 (14:04 -0700)]
[PATCH] drivers/net/ne3210.c: cleanups
- make two needlessly global functions static
- kill an ancient version variable
Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Richard Purdie [Mon, 5 Sep 2005 19:49:54 +0000 (20:49 +0100)]
[ARM] 2882/1: pxa2xx_sharpsl: Update PCMCIA driver to support variety of new hardware
Patch from Richard Purdie
This patch updates the PCMCIA pxa2xx_sharpsl driver to support multiple scoop
devices by adding a scoop to pcmcia slot mapping structure. It adds platform
support for poodle, is known to work on spitz (which is dual slot) and
should also support collie with a minor amount of further work.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Ben Dooks [Mon, 5 Sep 2005 19:47:53 +0000 (20:47 +0100)]
[ARM] 2876/1: N30 - remove task to toggle USB D+ line
Patch from Ben Dooks
The n30 machine file is using a kernel thread to change the
state of the USB D+ pull-up resistor, which is not the proper
way to do this. Once the usb-gadget support for the 24xx is
merge, the proper access method will be added.
This patch also removes the problem of using HZ for the
msleep calls, from Nishanth Aravamudan.
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Jean Delvare [Sat, 3 Sep 2005 08:52:11 +0000 (10:52 +0200)]
[PATCH] I2C: Drop the I2C_ACK_TEST ioctl
Drop the I2C_ACK_TEST ioctl, which was commented out. It never really
existed (not after 1999 anyway), and there is no such thing as a ack
test on I2C/SMBus anyway.
Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jim Cromie [Fri, 2 Sep 2005 20:57:52 +0000 (22:57 +0200)]
[PATCH] hwmon: (2/3) pc87360 driver update
pc87360: number-skew to init
The temp, therm, fan, pwm callbacks all have an offset skew in the code
which accommodates attribute numbering conventions under
/sys/bus/i2c/devices/9191-6620/ (ie they start at 1)
This patch moves that skew into the declaration, and out of the
functions (except for therm, where we simplify from 2 skews to 1). The
declarative skew is clearer, less error-prone, and more efficient.
The use of 11+offset-4 below reflects the fact that the sysfs numbering
of these units is 4, 5, 6, but they use internal VLM units 11, 12, 13 to
measure the thermistor voltages.
There's one remaining skew factor, in *_crit callbacks below, because
there are no critical thresholds for voltages 0-10, only for those
supporting the thermistors.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jim Cromie [Fri, 2 Sep 2005 20:52:43 +0000 (22:52 +0200)]
[PATCH] hwmon: (1/3) pc87360 driver update
Use the new "dynamic sysfs callbacks", as introduced recently by Yani
Ioannou, in pc87360.
Note that this change isn't indiscriminate. Only those attributes that
would benefit from having an index (i.e., those which are
macro-repeated) have been converted.
This significantly shrinks the size of the module:
before: 49235 drivers/hwmon/pc87360.ko
after: 32532 drivers/hwmon/pc87360.ko
Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / linux-2.6-omap-h63xx.git / log