Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (47 commits)
[MAINTAINERS] The ham radio code now has website at http://www.linux-ax25.org.
[MIPS] Use __ffs() instead of ffs() for waybit calculation.
[MIPS] Fix Makefile bugs for MIPS32/MIPS64 R1 and R2.
[MIPS] Handle IDE PIO cache aliases on SMP.
[MIPS] Make mips_srs_init static.
[MIPS] MIPS boards: Set HZ to 100.
[MIPS] kgdb: Let gcc compute the array size itself.
[MIPS] FPU affinity for MT ASE.
[MIPS] MT: Improved multithreading support.
[MIPS] kpsd and other AP/SP improvements.
[MIPS] R2: Instruction hazard barrier.
[MIPS] Fix genrtc compilation.
[MIPS] R2: Implement shadow register allocation without spinlock.
[MIPS] Fix VR41xx build errors.
[MIPS] Fix tx49_blast_icache32_page_indexed.
[MIPS] Enable SCHED_NO_NO_OMIT_FRAME_POINTER for MIPS.
[MIPS] Use "R" constraint for cache_op.
[MIPS] Rewrite all the assembler interrupt handlers to C.
[MIPS] Fix the crime against humanity that mipsIRQ.S is.
[MIPS] Fixup damage done by 22a9835c350782a5c3257343713932af3ac92ee0.
...
[MIPS] Rewrite all the assembler interrupt handlers to C.
Saves like 1,600 lines of code, is way easier to debug, compilers
frequently do a better job than the cut and paste type of handlers many
boards had. And finally having all the stuff done in a single place
also means alot of bug potencial for the MT ASE is gone.
The only surviving handler in assembler is the DECstation one; I hope
Maciej will rewrite it.
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[NET]: Remove redundant NULL checks before [kv]free
unaligned access in sk_run_filter()
[IPV6]: Clean up hop-by-hop options handler.
[IPV6] XFRM: Fix decoding session with preceding extension header(s).
[IPV6] XFRM: Don't use old copy of pointer after pskb_may_pull().
[IPV6]: Ensure to have hop-by-hop options in our header of &sk_buff.
[TCP]: Fix truesize underflow
- Removed unused argument (nhoff) for ipv6_parse_hopopts().
- Make ipv6_parse_hopopts() to align with other extension header
handlers.
- Removed pointless assignment (hdr), which is not used afterwards.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
[IPV6] XFRM: Fix decoding session with preceding extension header(s).
We did not correctly decode session with preceding extension
header(s). This was because we had already pulled preceding
headers, skb->nh.raw + 40 + 1 - skb->data was minus, and
pskb_may_pull() failed.
We now have IP6CB(skb)->nhoff and skb->h.raw, and we can
start parsing / decoding upper layer protocol from current
position.
Tracked down by Noriaki TAKAMIYA <takamiya@po.ntts.co.jp>
and tested by Kazunori Miyazawa <kazunori@miyazawa.org>.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Tue, 18 Apr 2006 20:24:14 +0000 (13:24 -0700)]
[TCP]: Fix truesize underflow
There is a problem with the TSO packet trimming code. The cause of
this lies in the tcp_fragment() function.
When we allocate a fragment for a completely non-linear packet the
truesize is calculated for a payload length of zero. This means that
truesize could in fact be less than the real payload length.
When that happens the TSO packet trimming can cause truesize to become
negative. This in turn can cause sk_forward_alloc to be -n * PAGE_SIZE
which would trigger the warning.
I've copied the code DaveM used in tso_fragment which should work here.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Renninger [Thu, 13 Apr 2006 13:14:04 +0000 (15:14 +0200)]
[CPUFREQ] If max_freq got reduced (e.g. by _PPC) a write to sysfs scaling_governor let cpufreq core stuck at low max_freq for ever
The previous patch had bugs (locking and refcount).
This one could also be related to the latest DELL reports.
But they only slip into this if a user prog (e.g. powersave daemon does when
AC got (un) plugged due to a scheme change) echos something to
/sys/../cpufreq/scaling_governor
while the frequencies got limited by BIOS.
This one works:
Subject: Max freq stucks at low freq if reduced by _PPC and sysfs gov access
The problem is reproducable by(if machine is limiting freqs via BIOS):
- Unplugging AC -> max freq gets limited
- echo ${governor} >/sys/.../cpufreq/scaling_governor (policy->user_data.max
gets overridden with policy->max and will never come up again.)
This patch exchanged the cpufreq_set_policy call to __cpufreq_set_policy and
duplicated it's functionality but did not override user_data.max.
The same happens with overridding min/max values. If freqs are limited and
you override the min freq value, the max freq global value will also get
stuck to the limited freq, even if BIOS allows all freqs again.
Last scenario does only happen if BIOS does not reduce the frequency
to the lowest value (should never happen, just for correctness...)
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
Move platform_scoop_config from the SharpSL scoop PCMCIA driver to
the SCOOP driver. This avoids build failures when PCMCIA is not built
or is modular (scoop.c itself cannot be modular).
Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
x86: don't allow tail-calls in sys_ftruncate[64]()
Gcc thinks it owns the incoming argument stack, but that's not true for
"asmlinkage" functions, and it corrupts the caller-set-up argument stack
when it pushes the third argument onto the stack. Which can result in
%ebx getting corrupted in user space.
Now, normally nobody sane would ever notice, since libc will save and
restore %ebx anyway over the system call, but it's still wrong.
I'd much rather have "asmlinkage" tell gcc directly that it doesn't own
the stack, but no such attribute exists, so we're stuck with our hacky
manual "prevent_tail_call()" macro once more (we've had the same issue
before with sys_waitpid() and sys_wait4()).
Thanks to Hans-Werner Hilse <hilse@sub.uni-goettingen.de> for reporting
the issue and testing the fix.
Merge branch 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm: Fix further issues in drivers/char/drm/via_irq.c
drivers/char/drm/drm_memory.c: possible cleanups
drm: deline a few large inlines in DRM code
drm: remove master setting from add/remove context
drm: drm_pci needs dma-mapping.h
[PATCH] drm: Fix issue reported by Coverity in drivers/char/drm/via_irq.c
o Start booting into the capture kernel after an Oops if system is in a
unrecoverable state. System will boot into the capture kernel, if one is
pre-loaded by the user, and capture the kernel core dump.
o One of the following conditions should be true to trigger the booting of
capture kernel.
- panic_on_oops is set.
- pid of current thread is 0
- pid of current thread is 1
- Oops happened inside interrupt context.
The patch I submitted earlier to fix disabled LAPIC handling in ACPI
was mismerged for some reason I still don't quite understand. Parts
of it was applied to the wrong function.
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge:
powerpc: Use correct sequence for putting CPU into nap mode
[PATCH] spufs: fix context-switch decrementer code
[PATCH] powerpc32: Set cpu explicitly in kernel compiles
[PATCH] powerpc/pseries: bugfix: balance calls to pci_device_put
[PATCH] powerpc: Fix machine detection in prom_init.c
[PATCH] ppc32: Fix string comparing in platform_notify_map
[PATCH] powerpc: Avoid __initcall warnings
[PATCH] powerpc: Ensure runlatch is off in the idle loop
powerpc: Fix CHRP booting - needs a define_machine call
powerpc: iSeries has only 256 IRQs
[PATCH] cfq: Further rbtree traversal and cfq_exit_queue() race fix
In current code, we are re-reading cic->key after dead cic->key check.
So, in theory, it may really re-read *after* cfq_exit_queue() seted NULL.
To avoid race, we copy it to stack, then use it. With this change, I
guess gcc will assign cic->key to a register or stack, and it wouldn't
be re-readed.
Paul Mackerras [Tue, 18 Apr 2006 11:49:11 +0000 (21:49 +1000)]
powerpc: Use correct sequence for putting CPU into nap mode
We weren't using the recommended sequence for putting the CPU into
nap mode. When I changed the idle loop, for some reason 7447A cpus
started hanging when we put them into nap mode. Changing to the
recommended sequence fixes that.
The complexity here is that the recommended sequence is a loop that
keeps putting the cpu back into nap mode. Clearly we need some way
to break out of the loop when an interrupt (external interrupt,
decrementer, performance monitor) occurs. Here we use a bit in
the thread_info struct to indicate that we need this, and the exception
entry code notices this and arranges for the exception to return
to the value in the link register, thus breaking out of the loop.
We use a new `local_flags' field in the thread_info which we can
alter without needing to use an atomic update sequence.
The PPC970 has the same recommended sequence, so we do the same thing
there too.
This also fixes a bug in the kernel stack overflow handling code on
32-bit, since it was causing a value that we needed in a register to
get trashed.
When queue dies, we set cic->key=NULL as dead mark. So, when we
traverse a rbtree, we must check whether it's still valid key. if it
was invalidated, drop it, then restart the traversal from top.
[PATCH] IPC: access to unmapped vmalloc area in grow_ary()
grow_ary() should not copy struct ipc_id_ary (it copies new->p, not
new). Due to this, memcpy() src pointer could hit unmapped vmalloc page
when near page boundary.
This fixes http://bugzilla.kernel.org/show_bug.cgi?id=6388
The bug is caused by ip_route_input dereferencing skb->nh.protocol of
the dummy skb passed dow from inet_rtm_getroute (Thanks Thomas for seeing
it). It only happens if the route requested is for a multicast IP
address.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
[PATCH] shmat: stop mprotect from giving write permission to a readonly attachment (CVE-2006-1524)
I found that all of 2.4 and 2.6 have been letting mprotect give write
permission to a readonly attachment of shared memory, whether or not IPC
would give the caller that permission.
SUS says "The behaviour of this function [mprotect] is unspecified if the
mapping was not established by a call to mmap", but I don't think we can
interpret that as allowing it to subvert IPC permissions.
I haven't tried 2.2, but the 2.2.26 source looks like it gets it right; and
the patch below reproduces that behaviour - mprotect cannot be used to add
write permission to a shared memory segment attached readonly.
This patch is simple, and I'm sure it's what we should have done in 2.4.0:
if you want to go on to switch write permission on and off with mprotect,
just don't attach the segment readonly in the first place.
However, we could have accumulated apps which attach readonly (even though
they would be permitted to attach read/write), and which subsequently use
mprotect to switch write permission on and off: it's not unreasonable.
I was going to add a second ipcperms check in do_shmat, to check for
writable when readonly, and if not writable find_vma and clear VM_MAYWRITE.
But security_ipc_permission might do auditing, and it seems wrong to
report an attempt for write permission when there has been none. Or we
could flag the vma as SHM, note the shmid or shp in vm_private_data, and
then get mprotect to check.
But the patch below is a lot simpler: I'd rather stick with it, if we can
convince ourselves somehow that it'll be safe.
Mike Miller [Mon, 10 Apr 2006 22:38:07 +0000 (15:38 -0700)]
[PATCH] cciss: bug fix for crash when running hpacucli
Fix a crash when running hpacucli with multiple logical volumes on a cciss
controller. We were not properly initializing the disk->queue and causing
a fault.
Thanks to Hasso Tepper for reporting the problem. Thanks to Steve Cameron
for root causing the problem. Most of the patch just moves things around.
The fix is a one-liner.
Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Stephen Cameron <steve.cameron@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Stephen Rothwell [Mon, 10 Apr 2006 07:17:20 +0000 (00:17 -0700)]
[PATCH] Fix block device symlink name
As noted further on the this file, some block devices have a / in their
name, so fix the "block:..." symlink name the same as the /sys/block name.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Russell King [Sat, 15 Apr 2006 19:46:11 +0000 (20:46 +0100)]
[SERIAL] Update serial driver documentation
Improve serial driver documentation:
- Remove CVS id.
- Update pointer to reference driver documentation.
- Add comments about new uart_write_console function.
- Add TIOCM_LOOP modem control bit description.
- Add commentry about enable_ms method being called multiple times.
- Add commentry about startup/shutdown method calling.
- Mention that dereferencing port->info after shutdown is invalid.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
David Brownell [Sat, 15 Apr 2006 01:05:38 +0000 (18:05 -0700)]
Fix AT91RM9200 build breakage
The at91_cf driver got out of sync with certain changes in the PCMCIA
layer, notably getting rid of some duplication of data ... causing the
version merged to kernel.org to fail compiling.
This patch gives the at91_cf platform device a new iomem resource, using
it so this new pcmcia scheme works. It also cleans up some whitepsace
bugs that have accumulated over time (mostly too-long lines).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
projects / linux-2.6-omap-h63xx.git / log