]> pilppa.com Git - linux-2.6-omap-h63xx.git/log
linux-2.6-omap-h63xx.git
16 years agox86: KVM guest: use paravirt function to calculate cpu khz
Glauber Costa [Mon, 28 Jul 2008 14:47:53 +0000 (11:47 -0300)]
x86: KVM guest: use paravirt function to calculate cpu khz

We're currently facing timing problems in guests that do
calibration under heavy load, and then the load vanishes.
This means we'll have a much lower lpj than we actually should,
and delays end up taking less time than they should, which is a
nasty bug.

Solution is to pass on the lpj value from host to guest, and have it
preset.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agox86: paravirt: factor out cpu_khz to common code
Glauber Costa [Mon, 28 Jul 2008 14:47:52 +0000 (11:47 -0300)]
x86: paravirt: factor out cpu_khz to common code

KVM intends to use paravirt code to calibrate khz. Xen
current code will do just fine. So as a first step, factor out
code to pvclock.c.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: PIT: fix injection logic and count
Marcelo Tosatti [Sat, 26 Jul 2008 20:01:01 +0000 (17:01 -0300)]
KVM: PIT: fix injection logic and count

The PIT injection logic is problematic under the following cases:

1) If there is a higher priority vector to be delivered by the time
kvm_pit_timer_intr_post is invoked ps->inject_pending won't be set.
This opens the possibility for missing many PIT event injections (say if
guest executes hlt at this point).

2) ps->inject_pending is racy with more than two vcpus. Since there's no locking
around read/dec of pt->pending, two vcpu's can inject two interrupts for a single
pt->pending count.

Fix 1 by using an irq ack notifier: only reinject when the previous irq
has been acked. Fix 2 with appropriate locking around manipulation of
pending count and irq_ack by the injection / ack paths.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: irq ack notification
Marcelo Tosatti [Sat, 26 Jul 2008 20:01:00 +0000 (17:01 -0300)]
KVM: irq ack notification

Based on a patch from: Ben-Ami Yassour <benami@il.ibm.com>
which was based on a patch from: Amit Shah <amit.shah@qumranet.com>

Notify IRQ acking on PIC/APIC emulation. The previous patch missed two things:

- Edge triggered interrupts on IOAPIC
- PIC reset with IRR/ISR set should be equivalent to ack (LAPIC probably
needs something similar).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Amit Shah <amit.shah@qumranet.com>
CC: Ben-Ami Yassour <benami@il.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: Add irq ack notifier list
Avi Kivity [Sat, 26 Jul 2008 20:00:59 +0000 (17:00 -0300)]
KVM: Add irq ack notifier list

This can be used by kvm subsystems that are interested in when
interrupts are acked, for example time drift compensation.

Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: powerpc: Map guest userspace with TID=0 mappings
Hollis Blanchard [Fri, 25 Jul 2008 18:54:53 +0000 (13:54 -0500)]
KVM: powerpc: Map guest userspace with TID=0 mappings

When we use TID=N userspace mappings, we must ensure that kernel mappings have
been destroyed when entering userspace. Using TID=1/TID=0 for kernel/user
mappings and running userspace with PID=0 means that userspace can't access the
kernel mappings, but the kernel can directly access userspace.

The net is that we don't need to flush the TLB on privilege switches, but we do
on guest context switches (which are far more infrequent). Guest boot time
performance improvement: about 30%.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: ppc: Write only modified shadow entries into the TLB on exit
Hollis Blanchard [Fri, 25 Jul 2008 18:54:52 +0000 (13:54 -0500)]
KVM: ppc: Write only modified shadow entries into the TLB on exit

Track which TLB entries need to be written, instead of overwriting everything
below the high water mark. Typically only a single guest TLB entry will be
modified in a single exit.

Guest boot time performance improvement: about 15%.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: ppc: Stop saving host TLB state
Hollis Blanchard [Fri, 25 Jul 2008 18:54:51 +0000 (13:54 -0500)]
KVM: ppc: Stop saving host TLB state

We're saving the host TLB state to memory on every exit, but never using it.
Originally I had thought that we'd want to restore host TLB for heavyweight
exits, but that could actually hurt when context switching to an unrelated host
process (i.e. not qemu).

Since this decreases the performance penalty of all exits, this patch improves
guest boot time by about 15%.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: ppc: guest breakpoint support
Hollis Blanchard [Fri, 25 Jul 2008 18:54:49 +0000 (13:54 -0500)]
KVM: ppc: guest breakpoint support

Allow host userspace to program hardware debug registers to set breakpoints
inside guests.

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: Ignore DEBUGCTL MSRs with no effect
Alexander Graf [Tue, 22 Jul 2008 06:00:45 +0000 (08:00 +0200)]
KVM: Ignore DEBUGCTL MSRs with no effect

Netware writes to DEBUGCTL and reads from the DEBUGCTL and LAST*IP MSRs
without further checks and is really confused to receive a #GP during that.
To make it happy we should just make them stubs, which is exactly what SVM
already does.

Writes to DEBUGCTL that are vendor-specific are resembled to behave as if the
virtual CPU does not know them.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: VMX: Avoid vmwrite(HOST_RSP) when possible
Avi Kivity [Thu, 17 Jul 2008 15:04:30 +0000 (18:04 +0300)]
KVM: VMX: Avoid vmwrite(HOST_RSP) when possible

Usually HOST_RSP retains its value across guest entries.  Take advantage
of this and avoid a vmwrite() when this is so.

Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: ppc: trace powerpc instruction emulation
Christian Ehrhardt [Mon, 14 Jul 2008 12:00:04 +0000 (14:00 +0200)]
KVM: ppc: trace powerpc instruction emulation

This patch adds a trace point for the instruction emulation on embedded powerpc
utilizing the KVM_TRACE interface.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: ppc: adds trace points for ppc tlb activity
Jerone Young [Mon, 14 Jul 2008 12:00:03 +0000 (14:00 +0200)]
KVM: ppc: adds trace points for ppc tlb activity

This patch adds trace points to track powerpc TLB activities using the
KVM_TRACE infrastructure.

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: ppc: enable KVM_TRACE building for powerpc
Jerone Young [Mon, 14 Jul 2008 12:00:02 +0000 (14:00 +0200)]
KVM: ppc: enable KVM_TRACE building for powerpc

This patch enables KVM_TRACE to build for PowerPC arch. This means just
adding sections to Kconfig and Makefile.

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: kvmtrace: replace get_cycles with ktime_get v3
Christian Ehrhardt [Mon, 14 Jul 2008 12:00:01 +0000 (14:00 +0200)]
KVM: kvmtrace: replace get_cycles with ktime_get v3

The current kvmtrace code uses get_cycles() while the interpretation would be
easier using using nanoseconds. ktime_get() should give at least the same
accuracy as get_cycles on all architectures (even better on 32bit archs) but
at a better unit (e.g. comparable between hosts with different frequencies.

[avi: avoid ktime_t in public header]

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: kvmtrace: Remove use of bit fields in kvm trace structure
Christian Ehrhardt [Mon, 14 Jul 2008 12:00:00 +0000 (14:00 +0200)]
KVM: kvmtrace: Remove use of bit fields in kvm trace structure

This patch fixes kvmtrace use on big endian systems. When using bit fields the
compiler will lay data out in the wrong order expected when laid down into a
file.
This fixes it by using one variable instead of using bit fields.

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: SVM: Unify register save/restore across 32 and 64 bit hosts
Avi Kivity [Mon, 14 Jul 2008 11:44:59 +0000 (14:44 +0300)]
KVM: SVM: Unify register save/restore across 32 and 64 bit hosts

Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: VMX: Unify register save/restore across 32 and 64 bit hosts
Avi Kivity [Mon, 14 Jul 2008 11:44:59 +0000 (14:44 +0300)]
KVM: VMX: Unify register save/restore across 32 and 64 bit hosts

Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: VMX: Reinject real mode exception
Jan Kiszka [Mon, 14 Jul 2008 10:28:51 +0000 (12:28 +0200)]
KVM: VMX: Reinject real mode exception

As we execute real mode guests in VM86 mode, exception have to be
reinjected appropriately when the guest triggered them. For this purpose
the patch adopts the real-mode injection pattern used in vmx_inject_irq
to vmx_queue_exception, additionally taking care that the IP is set
correctly for #BP exceptions. Furthermore it extends
handle_rmode_exception to reinject all those exceptions that can be
raised in real mode.

This fixes the execution of himem.exe from FreeDOS and also makes its
debug.com work properly.

Note that guest debugging in real mode is broken now. This has to be
fixed by the scheduled debugging infrastructure rework (will be done
once base patches for QEMU have been accepted).

Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: Consolidate XX_VECTOR defines
Jan Kiszka [Sun, 13 Jul 2008 11:40:55 +0000 (13:40 +0200)]
KVM: Consolidate XX_VECTOR defines

Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: Consolidate PIC isr clearing into a function
Avi Kivity [Mon, 7 Jul 2008 11:45:39 +0000 (14:45 +0300)]
KVM: Consolidate PIC isr clearing into a function

Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: VMX: Remove redundant check in handle_rmode_exception
Mohammed Gamal [Sat, 12 Jul 2008 13:02:08 +0000 (16:02 +0300)]
KVM: VMX: Remove redundant check in handle_rmode_exception

Since checking for vcpu->arch.rmode.active is already done whenever we
call handle_rmode_exception(), checking it inside the function is redundant.

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: VMX: Move interrupt post-processing to vmx_complete_interrupts()
Avi Kivity [Thu, 3 Jul 2008 13:14:28 +0000 (16:14 +0300)]
KVM: VMX: Move interrupt post-processing to vmx_complete_interrupts()

Instead of looking at failed injections in the vm entry path, move
processing to the exit path in vmx_complete_interrupts().  This simplifes
the logic and removes any state that is hidden in vmx registers.

Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: Add a pending interrupt queue
Avi Kivity [Thu, 3 Jul 2008 12:17:01 +0000 (15:17 +0300)]
KVM: Add a pending interrupt queue

Similar to the exception queue, this hold interrupts that have been
accepted by the virtual processor core but not yet injected.

Not yet used.

Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: VMX: Fix pending exception processing
Avi Kivity [Thu, 3 Jul 2008 11:50:12 +0000 (14:50 +0300)]
KVM: VMX: Fix pending exception processing

The vmx code assumes that IDT-Vectoring can only be set when an exception
is injected due to the exception in question.  That's not true, however:
if the exception is injected correctly, and later another exception occurs
but its delivery is blocked due to a fault, then we will incorrectly assume
the first exception was not delivered.

Fix by unconditionally dequeuing the pending exception, and requeuing it
(or the second exception) if we see it in the IDT-Vectoring field.

Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: Clear exception queue before emulating an instruction
Avi Kivity [Thu, 3 Jul 2008 11:59:22 +0000 (14:59 +0300)]
KVM: Clear exception queue before emulating an instruction

If we're emulating an instruction, either it will succeed, in which case
any previously queued exception will be spurious, or we will requeue the
same exception.

Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: VMX: Move nmi injection failure processing to vm exit path
Avi Kivity [Wed, 2 Jul 2008 06:28:55 +0000 (09:28 +0300)]
KVM: VMX: Move nmi injection failure processing to vm exit path

Instead of processing nmi injection failure in the vm entry path, move
it to the vm exit path (vm_complete_interrupts()).  This separates nmi
injection from nmi post-processing, and moves the nmi state from the VT
state into vcpu state (new variable nmi_injected specifying an injection
in progress).

Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: Move NMI IRET fault processing to new vmx_complete_interrupts()
Avi Kivity [Tue, 1 Jul 2008 13:20:21 +0000 (16:20 +0300)]
KVM: Move NMI IRET fault processing to new vmx_complete_interrupts()

Currently most interrupt exit processing is handled on the entry path,
which is confusing.  Move the NMI IRET fault processing to a new function,
vmx_complete_interrupts(), which is called on the vmexit path.

Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: MMU: Simplify kvm_mmu_zap_page()
Avi Kivity [Fri, 11 Jul 2008 15:07:26 +0000 (18:07 +0300)]
KVM: MMU: Simplify kvm_mmu_zap_page()

The twisty maze of conditionals can be reduced.

[joerg: fix tlb flushing]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: MMU: Separate the code for unlinking a shadow page from its parents
Avi Kivity [Fri, 11 Jul 2008 14:59:46 +0000 (17:59 +0300)]
KVM: MMU: Separate the code for unlinking a shadow page from its parents

Place into own function, in preparation for further cleanups.

Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: Introduce kvm_set_irq to inject interrupts in guests
Amit Shah [Fri, 27 Jun 2008 12:55:02 +0000 (15:55 +0300)]
KVM: Introduce kvm_set_irq to inject interrupts in guests

This function injects an interrupt into the guest given the kvm struct,
the (guest) irq number and the interrupt level.

Signed-off-by: Amit Shah <amit.shah@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: Move KVM TRACE DEFINITIONS to common header
Hollis Blanchard [Tue, 1 Jul 2008 21:23:49 +0000 (16:23 -0500)]
KVM: Move KVM TRACE DEFINITIONS to common header

Move KVM trace definitions from x86 specific kvm headers to common kvm
headers to create a cross-architecture numbering scheme for trace
events. This means the kvmtrace_format userspace tool won't need to know
which architecture produced the log file being processed.

Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: x86: accessors for guest registers
Marcelo Tosatti [Fri, 27 Jun 2008 17:58:02 +0000 (14:58 -0300)]
KVM: x86: accessors for guest registers

As suggested by Avi, introduce accessors to read/write guest registers.
This simplifies the ->cache_regs/->decache_regs interface, and improves
register caching which is important for VMX, where the cost of
vmcs_read/vmcs_write is significant.

[avi: fix warnings]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoKVM: VMX: Rename misnamed msr bits
Sheng Yang [Tue, 24 Jun 2008 09:02:38 +0000 (17:02 +0800)]
KVM: VMX: Rename misnamed msr bits

MSR_IA32_FEATURE_LOCKED is just a bit in fact, which shouldn't be prefixed with
MSR_.  So is MSR_IA32_FEATURE_VMXON_ENABLED.

Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
16 years agoMerge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Tue, 14 Oct 2008 23:53:02 +0000 (16:53 -0700)]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c-viapro: Add support for SMBus Process Call transactions
  i2c: Restore i2c_smbus_process_call function
  i2c: Do earlier driver model init
  i2c: Only build Tyan SMBus mux drivers on x86
  i2c: Guard against oopses from bad init sequences
  i2c: Document the implementation details of the /dev interface
  i2c: Improve dev-interface documentation
  i2c-parport-light: Don't register a platform device resource
  hwmon: (dme1737) Convert to a new-style i2c driver
  hwmon: (dme1737) Be less i2c-centric
  i2c/tps65010: Vibrator hookup to gpiolib
  i2c-viapro: Add VX800/VX820 support
  i2c: Renesas Highlander FPGA SMBus support
  i2c-pca-isa: Don't grab arbitrary resources
  i2c/isp1301_omap: Convert to a new-style i2c driver, part 2
  i2c/isp1301_omap: Convert to a new-style i2c driver, part 1

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Tue, 14 Oct 2008 23:35:43 +0000 (16:35 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits)
  HID: build drivers for all quirky devices by default
  HID: add missing blacklist entry for Apple ATV ircontrol
  HID: add support for Bright ABNT2 brazilian device
  HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers
  HID: fix numlock led on Dell device 0x413c/0x2105
  HID: remove warn() macro from usb hid drivers
  HID: remove info() macro from usb HID drivers
  HID: add appletv IR receiver quirk
  HID: fix a lockup regression when using force feedback on a PID device
  HID: hiddev.h: Fix example code.
  HID: hiddev.h: Fix mixed space and tabs in example code.
  HID: convert to dev_* prints
  HID: remove hid-ff
  HID: move zeroplus FF processing
  HID: move thrustmaster FF processing
  HID: move pantherlord FF processing
  HID: fix incorrent length condition in hidraw_write()
  HID: fix tty<->hid deadlock
  HID: ignore iBuddy devices
  HID: report descriptor fix for remaining MacBook JIS keyboards
  ...

16 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Tue, 14 Oct 2008 23:34:11 +0000 (16:34 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (56 commits)
  ocfs2: Make cached block reads the common case.
  ocfs2: Kill the last naked wait_on_buffer() for cached reads.
  ocfs2: Move ocfs2_bread() into dir.c
  ocfs2: Simplify ocfs2_read_block()
  ocfs2: Require an inode for ocfs2_read_block(s)().
  ocfs2: Separate out sync reads from ocfs2_read_blocks()
  ocfs2: Refactor xattr list and remove ocfs2_xattr_handler().
  ocfs2: Calculate EA hash only by its suffix.
  ocfs2: Move trusted and user attribute support into xattr.c
  ocfs2: Uninline ocfs2_xattr_name_hash()
  ocfs2: Don't check for NULL before brelse()
  ocfs2: use smaller counters in ocfs2_remove_xattr_clusters_from_cache
  ocfs2: Documentation update for user_xattr / nouser_xattr mount options
  ocfs2: make la_debug_mutex static
  ocfs2: Remove pointless !!
  ocfs2: Add empty bucket support in xattr.
  ocfs2/xattr.c: Fix a bug when inserting xattr.
  ocfs2: Add xattr mount option in ocfs2_show_options()
  ocfs2: Switch over to JBD2.
  ocfs2: Add the 'inode64' mount option.
  ...

16 years agortc-cmos: look for PNP RTC first, then for platform RTC
Bjorn Helgaas [Tue, 14 Oct 2008 23:01:59 +0000 (17:01 -0600)]
rtc-cmos: look for PNP RTC first, then for platform RTC

We shouldn't rely on "pnp_platform_devices" to tell us whether there
is a PNP RTC device.

I introduced "pnp_platform_devices", but I think it was a mistake.
All it tells us is whether we found any PNPBIOS or PNPACPI devices.
Many machines have some PNP devices, but do not describe the RTC
via PNP.  On those machines, we need to do the platform driver probe
to find the RTC.

We should just register the PNP driver and see whether it claims anything.
If we don't find a PNP RTC, fall back to the platform driver probe.

This (in conjunction with the arch/x86/kernel/rtc.c patch to add
a platform RTC device when PNP doesn't have one) should resolve
these issues:

    http://bugzilla.kernel.org/show_bug.cgi?id=11580
    https://bugzilla.redhat.com/show_bug.cgi?id=451188

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Reported-by: Rik Theys <rik.theys@esat.kuleuven.be>
Reported-by: shr_msn@yahoo.com.tw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agox86: register a platform RTC device if PNP doesn't describe it
Bjorn Helgaas [Tue, 14 Oct 2008 23:01:03 +0000 (17:01 -0600)]
x86: register a platform RTC device if PNP doesn't describe it

Most if not all x86 platforms have an RTC device, but sometimes the RTC
is not exposed as a PNP0b00/PNP0b01/PNP0b02 device in PNPBIOS or ACPI:

    http://bugzilla.kernel.org/show_bug.cgi?id=11580
    https://bugzilla.redhat.com/show_bug.cgi?id=451188

It's best if we can discover the RTC via PNP because then we know
which flavor of device it is, where it lives, and which IRQ it uses.

But if we can't, we should register a platform device using the
compiled-in RTC_PORT/RTC_IRQ resource assumptions.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Reported-by: Rik Theys <rik.theys@esat.kuleuven.be>
Reported-by: shr_msn@yahoo.com.tw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc-cmos: move wake setup from ACPI glue into RTC driver
Bjorn Helgaas [Tue, 14 Oct 2008 19:50:21 +0000 (13:50 -0600)]
rtc-cmos: move wake setup from ACPI glue into RTC driver

Move rtc_wake_setup() from drivers/acpi/glue.c into the RTC driver
in drivers/rtc/rtc-cmos.c.

This removes the ordering constraint between the module_init(acpi_rtc_init)
and the cmos_do_probe() code that depends on it.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoHID: build drivers for all quirky devices by default
Jiri Kosina [Tue, 14 Oct 2008 21:37:33 +0000 (23:37 +0200)]
HID: build drivers for all quirky devices by default

Once kernel configuration has CONFIG_HID turned on, let also all the
specialized drivers for quirky devices to be built (unless CONFIG_EMBEDDED is
specified), as usually users don't care that much which driver
gives them the functionality, but when they want generic support, they
probably want to have support for all the quirky devices as well.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: add missing blacklist entry for Apple ATV ircontrol
Jiri Kosina [Tue, 14 Oct 2008 20:45:40 +0000 (22:45 +0200)]
HID: add missing blacklist entry for Apple ATV ircontrol

This device is already handled by hid-apple driver, but the blacklist entry
was missing in generic driver.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: add support for Bright ABNT2 brazilian device
Mauro Carvalho Chehab [Tue, 14 Oct 2008 20:41:43 +0000 (22:41 +0200)]
HID: add support for Bright ABNT2 brazilian device

This keyboard needs to reset the LEDS during probe.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Don't let Avermedia Radio FM800 be handled by usb hid drivers
Mauro Carvalho Chehab [Tue, 14 Oct 2008 20:34:32 +0000 (22:34 +0200)]
HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers

Based on an original patch from Alexey Klimov <klimov.linux@gmail.com>,
against kernel version 2.6.27.

This device is already handled by radio-mr800 driver, and we therefore
want usbhid not to touch it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: fix numlock led on Dell device 0x413c/0x2105
Mauro Carvalho Chehab [Tue, 14 Oct 2008 13:08:47 +0000 (11:08 -0200)]
HID: fix numlock led on Dell device 0x413c/0x2105

This keyboard needs to re-sync numlock after probing.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: remove warn() macro from usb hid drivers
From: Greg Kroah-Hartman [Sat, 11 Oct 2008 22:25:51 +0000 (00:25 +0200)]
HID: remove warn() macro from usb hid drivers

USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible.  In the
few places that will not work out, use a basic printk().

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: remove info() macro from usb HID drivers
Greg Kroah-Hartman [Sat, 11 Oct 2008 22:14:23 +0000 (00:14 +0200)]
HID: remove info() macro from usb HID drivers

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: add appletv IR receiver quirk
Peter Korsgaard [Mon, 6 Oct 2008 09:15:34 +0000 (11:15 +0200)]
HID: add appletv IR receiver quirk

Similar to the existing IRCONTROL4 handling

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: fix a lockup regression when using force feedback on a PID device
Anssi Hannula [Sat, 4 Oct 2008 12:44:06 +0000 (14:44 +0200)]
HID: fix a lockup regression when using force feedback on a PID device

Commit 8006479c9b75fb6594a7b746af3d7f1fbb68f18f introduced a spinlock in
input_dev->event_lock, which is locked when handling input events.
However, the hid-pidff driver sleeps when handling events as it waits for
reports being sent to the device before changing the report contents
again.
This causes a system lockup when trying to use force feedback with a PID
device, a regression introduced in 2.6.24 and 2.6.23.15.

Fix it by extracting the raw report data from struct hid_report
immediately when hid_submit_report() is called, therefore allowing
drivers to change the contents of struct hid_report immediately without
affecting the already-queued transfer.

In hid-pidff, re-add the removed usbhid_wait_io() to
pidff_erase_effect() instead, to prevent a full report queue from causing
the submission to fail, thus not freeing up device memory.
pidff_erase_effect() is not called while dev->event_lock is held.

Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: hiddev.h: Fix example code.
Antonio Ospite [Thu, 2 Oct 2008 20:15:02 +0000 (22:15 +0200)]
HID: hiddev.h: Fix example code.

Fix hiddev.h example code.
To get the correct usage code, you need to set report_type and
report_id.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: hiddev.h: Fix mixed space and tabs in example code.
Antonio Ospite [Thu, 2 Oct 2008 20:14:54 +0000 (22:14 +0200)]
HID: hiddev.h: Fix mixed space and tabs in example code.

Fix mixed space and tabs in example code.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: convert to dev_* prints
Jiri Slaby [Thu, 18 Sep 2008 10:23:34 +0000 (12:23 +0200)]
HID: convert to dev_* prints

Since we have a real device bound to a driver, we may use struct
device for printing. Use dev_* functions instead of printks in
4 drivers.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: remove hid-ff
Jiri Slaby [Thu, 18 Sep 2008 10:23:33 +0000 (12:23 +0200)]
HID: remove hid-ff

hid-ff.c now calls only pidff (generic driver), the special ones are now
in separate drivers. Invoke pidff on all non-special directly.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move zeroplus FF processing
Jiri Slaby [Thu, 18 Sep 2008 10:23:32 +0000 (12:23 +0200)]
HID: move zeroplus FF processing

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move thrustmaster FF processing
Jiri Slaby [Thu, 18 Sep 2008 10:23:31 +0000 (12:23 +0200)]
HID: move thrustmaster FF processing

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move pantherlord FF processing
Jiri Slaby [Thu, 18 Sep 2008 17:43:32 +0000 (19:43 +0200)]
HID: move pantherlord FF processing

Move the force feedback processing into a separate module.

[jkosina@suse.cz: fix Kconfig texts a little bit]

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: fix incorrent length condition in hidraw_write()
Jiri Kosina [Wed, 17 Sep 2008 17:41:58 +0000 (19:41 +0200)]
HID: fix incorrent length condition in hidraw_write()

The bound check on the buffer length

if (count > HID_MIN_BUFFER_SIZE)

is of course incorrent, the proper check is

if (count > HID_MAX_BUFFER_SIZE)

Fix it.

Reported-by: Jerry Ryle <jerry@mindtribe.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: fix tty<->hid deadlock
Jiri Slaby [Mon, 8 Sep 2008 23:23:03 +0000 (01:23 +0200)]
HID: fix tty<->hid deadlock

hid_compat_load() runs on the default workqueue, it request_module(), it
execs modprobe, it exits, tty flushes default workqueue, it hangs, because
we are still in it.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Tested-by: <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: ignore iBuddy devices
Remi Cattiau [Mon, 8 Sep 2008 23:39:33 +0000 (01:39 +0200)]
HID: ignore iBuddy devices

iBuddy devices claim to be HID devices, but they are not.
Add them to the blacklist.

Signed-off-by: Remi Cattiau <remi@cattiau.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: report descriptor fix for remaining MacBook JIS keyboards
Tomoya Adachi [Thu, 4 Sep 2008 09:29:27 +0000 (11:29 +0200)]
HID: report descriptor fix for remaining MacBook JIS keyboards

This patch fixes a problem that MacBook JIS keyboard sends wrong report
descriptors. Although it has already been fixed in the first Core 2 Duo model,
it still remains in other models of MacBook.

Signed-off-by: Tomoya Adachi <adachi@il.is.s.u-tokyo.ac.jp>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: fix gyration build error
Randy Dunlap [Thu, 4 Sep 2008 08:55:00 +0000 (10:55 +0200)]
HID: fix gyration build error

Fix config symbol name in ifdef to fix build error:

ERROR: "hid_compat_gyration" [drivers/hid/hid-dummy.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: Autocentering support for Logitech MOMO Racing Wheel
Sergey Belyashov [Tue, 2 Sep 2008 15:31:16 +0000 (17:31 +0200)]
HID: Autocentering support for Logitech MOMO Racing Wheel

Current kernel has no support for autocentering for Logitech wheels.  By
default autocentering enabled in wheel and constant effect does not work
properly. Using USB sniffer I found command which change autocentering
settings: 0xFE, 0x0D, 0x0R, 0x0L, 0x80, 0x00, 0x00, where R - clockwise force,
L - counter-clockwise (0x0-0xF, 0xC = 100%).

Signed-off-by: Sergey Belyashov <Sergey.Belyashov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: fix grammo in HID_COMPAT Kconfig help text
Alex Chiang [Wed, 27 Aug 2008 11:36:18 +0000 (13:36 +0200)]
HID: fix grammo in HID_COMPAT Kconfig help text

The Kconfig option for HID_COMPAT should read "lose", not "loose".

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: add support for Super Dual Box Pro USB PS2/PS2 adapter
Jiri Kosina [Wed, 27 Aug 2008 09:21:42 +0000 (11:21 +0200)]
HID: add support for Super Dual Box Pro USB PS2/PS2 adapter

This seems to be the very same device, as already supported Smartjoy
dual Plus, but with slightly different vendor ID. Let's support this
one too.

Reported-by: David Ashley <dashxdr@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: remove ignore quirk for MGE UPS devices
Richard Hughes [Wed, 27 Aug 2008 09:19:37 +0000 (11:19 +0200)]
HID: remove ignore quirk for MGE UPS devices

This patch reverts the change made four years ago here:
http://www.vg.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-hid-2.4.25-pre7.patch

UPS's made by MGE can be used with usbhid just fine, and by removing the
ignore quirk allows them to be used with HAL so they just work when plugged
in, without needing to be manually configured.

With the ignore quirk in place a user would have to configure NUT before the
UPS could be used, as NUT uses it's own internal USB matching framework
to match against the USB devices, do low level control messages on the
device and then parse the HID tables all in userspace.

This is not needed, as allowing the device to be claimed as a usbhid device
allows it to be used like any other USB UPS device. The devices correctly
advertise the power device page which can be queried for the device state.

I assume the quirk was changed so that people using < libusb 0.1.8 could
still use NUT's internal HID code to manage the UPS.
libusb 0.1.8 was released quite some time ago: 2004-02-11.

This patch does not break NUT as in drivers/libusb.c the device is force
unbound from the kernel driver using usb_detach_kernel_driver_np () where
it can be controlled like normal.

[jkosina@suse.cz: adapt to the new hidbus code]

Signed-off-by: Richard Hughes <rhughes@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: introduce list for hiddev creation forcing
Jiri Kosina [Wed, 20 Aug 2008 17:13:52 +0000 (19:13 +0200)]
HID: introduce list for hiddev creation forcing

Introduce a list of devices for which there is need to
force a creation of the hiddev interface, but still they
are operated by generic driver (i.e. certain UPS).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move logitech FF processing
Jiri Slaby [Fri, 4 Jul 2008 21:06:45 +0000 (23:06 +0200)]
HID: move logitech FF processing

Merge the logitech force feedback processing directly into logitech
driver from the usbhid core.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move reset leds quirk
Jiri Slaby [Fri, 27 Jun 2008 18:41:02 +0000 (20:41 +0200)]
HID: move reset leds quirk

Move the handling of the leds resetting from the core to
the dell and logitech drivers.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move connect quirks
Jiri Slaby [Thu, 26 Jun 2008 22:04:24 +0000 (00:04 +0200)]
HID: move connect quirks

Move connecting from usbhid to the hid layer and fix also hidp in
that manner.
This removes all the ignore/force hidinput/hiddev connecting quirks.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move dell quirks
Jiri Slaby [Thu, 26 Jun 2008 20:25:33 +0000 (22:25 +0200)]
HID: move dell quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move sony quirks
Jiri Slaby [Wed, 25 Jun 2008 21:47:04 +0000 (23:47 +0200)]
HID: move sony quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: remove rdesc quirk support
Jiri Slaby [Wed, 25 Jun 2008 21:03:55 +0000 (23:03 +0200)]
HID: remove rdesc quirk support

Remove support for both dynamic and static report descriptor
quirks. There is no longer rdesc code which it would support,
so it's useless.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: remove hid-input-quirks
Jiri Slaby [Thu, 31 Jul 2008 09:09:37 +0000 (11:09 +0200)]
HID: remove hid-input-quirks

Remove the file since these is no user now.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move samsung quirks
Jiri Slaby [Wed, 25 Jun 2008 20:31:48 +0000 (22:31 +0200)]
HID: move samsung quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move gyration quirks
Jiri Slaby [Thu, 24 Jul 2008 21:35:13 +0000 (23:35 +0200)]
HID: move gyration quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move monterey quirks
Jiri Slaby [Tue, 24 Jun 2008 22:07:50 +0000 (00:07 +0200)]
HID: move monterey quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move petalynx quirks
Jiri Slaby [Tue, 24 Jun 2008 21:46:21 +0000 (23:46 +0200)]
HID: move petalynx quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move belkin quirks
Jiri Slaby [Tue, 24 Jun 2008 21:24:57 +0000 (23:24 +0200)]
HID: move belkin quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move chicony quirks
Jiri Slaby [Tue, 24 Jun 2008 20:48:52 +0000 (22:48 +0200)]
HID: move chicony quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move ezkey quirks
Jiri Slaby [Tue, 24 Jun 2008 19:11:21 +0000 (21:11 +0200)]
HID: move ezkey quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move cherry quirks
Jiri Slaby [Tue, 24 Jun 2008 18:42:25 +0000 (20:42 +0200)]
HID: move cherry quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move a4tech quirks
Jiri Slaby [Mon, 23 Jun 2008 21:31:09 +0000 (23:31 +0200)]
HID: move a4tech quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move cypress quirks
Jiri Slaby [Mon, 23 Jun 2008 20:54:08 +0000 (22:54 +0200)]
HID: move cypress quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move sunplus quirks
Jiri Slaby [Mon, 23 Jun 2008 19:56:07 +0000 (21:56 +0200)]
HID: move sunplus quirks

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move microsoft quirks
Jiri Slaby [Fri, 20 Jun 2008 19:26:11 +0000 (21:26 +0200)]
HID: move microsoft quirks

Move them from the core code to a separate driver.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: indent switches/cases
Jiri Slaby [Wed, 18 Jun 2008 21:55:41 +0000 (23:55 +0200)]
HID: indent switches/cases

Bring switch and cases into coding style and save thus some
indentation to make the code tighter.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: add compat support
Jiri Slaby [Fri, 16 May 2008 09:49:22 +0000 (11:49 +0200)]
HID: add compat support

Add compat option to hid code to allow loading of all modules on
systems which don't allow autoloading because of old userspace.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move apple quirks
Jiri Slaby [Wed, 18 Jun 2008 21:36:49 +0000 (23:36 +0200)]
HID: move apple quirks

Move them from the core code to a separate driver.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move ignore quirks
Jiri Slaby [Fri, 16 May 2008 09:49:20 +0000 (11:49 +0200)]
HID: move ignore quirks

Move ignore quirks from usbhid-quirks into hid-core code. Also don't output
warning when ENODEV is error code in usbhid and try ordinal input in hidp
when that error is returned.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move logitech quirks
Jiri Slaby [Fri, 16 May 2008 09:49:19 +0000 (11:49 +0200)]
HID: move logitech quirks

Move them from the core and input code to a separate driver.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move usage input mapping to hid.h
Jiri Slaby [Fri, 16 May 2008 09:49:18 +0000 (11:49 +0200)]
HID: move usage input mapping to hid.h

This mapping are currently used on 2 placces and will be needed by more
quirk drivers, so move them to hid.h to allow them to use it.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: move ids into separate file
Jiri Slaby [Wed, 4 Jun 2008 09:02:56 +0000 (11:02 +0200)]
HID: move ids into separate file

Move ids from hid-quirks.c into separate file, since it will be needed in
more than one place.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: hid, make parsing event driven
Jiri Slaby [Fri, 16 May 2008 09:49:16 +0000 (11:49 +0200)]
HID: hid, make parsing event driven

Next step for complete hid bus, this patch includes:
- call parser either from probe or from hid-core if there is no probe.
- add ll_driver structure and centralize some stuff there (open, close...)
- split and merge usb_hid_configure and hid_probe into several functions
  to allow hooks/fixes between them

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoHID: make a bus from hid code
Jiri Slaby [Fri, 16 May 2008 09:49:15 +0000 (11:49 +0200)]
HID: make a bus from hid code

Make a bus from hid core. This is the first step for converting all the
quirks and separate almost-drivers into real drivers attached to this bus.

It's implemented to change behaviour in very tiny manner, so that no driver
needs to be changed this time.

Also add generic drivers for both usb and bt into usbhid or hidp
respectively which will bind all non-blacklisted device. Those blacklisted
will be either grabbed by special drivers or by nobody if they are broken at
the very rude base.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agomodpost: add support for hid
Jiri Slaby [Mon, 19 May 2008 13:50:01 +0000 (15:50 +0200)]
modpost: add support for hid

Generate aliases for hid device modules to support autoloading.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
16 years agoMerge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Tue, 14 Oct 2008 19:31:14 +0000 (12:31 -0700)]
Merge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux: (59 commits)
  svcrdma: Fix IRD/ORD polarity
  svcrdma: Update svc_rdma_send_error to use DMA LKEY
  svcrdma: Modify the RPC reply path to use FRMR when available
  svcrdma: Modify the RPC recv path to use FRMR when available
  svcrdma: Add support to svc_rdma_send to handle chained WR
  svcrdma: Modify post recv path to use local dma key
  svcrdma: Add a service to register a Fast Reg MR with the device
  svcrdma: Query device for Fast Reg support during connection setup
  svcrdma: Add FRMR get/put services
  NLM: Remove unused argument from svc_addsock() function
  NLM: Remove "proto" argument from lockd_up()
  NLM: Always start both UDP and TCP listeners
  lockd: Remove unused fields in the nlm_reboot structure
  lockd: Add helper to sanity check incoming NOTIFY requests
  lockd: change nlmclnt_grant() to take a "struct sockaddr *"
  lockd: Adjust nlmsvc_lookup_host() to accomodate AF_INET6 addresses
  lockd: Adjust nlmclnt_lookup_host() signature to accomodate non-AF_INET
  lockd: Support non-AF_INET addresses in nlm_lookup_host()
  NLM: Convert nlm_lookup_host() to use a single argument
  svcrdma: Add Fast Reg MR Data Types
  ...

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
Linus Torvalds [Tue, 14 Oct 2008 19:28:55 +0000 (12:28 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (26 commits)
  mfd: Fix warning in WM8350
  mfd: Add placeholders for WM8350 client devices
  da903x: add regulator support for DA9030/DA9034
  mfd: Add WM8350 subdevice registration helper
  regulator: Add WM8350 regulator support
  mfd: Add WM8350 interrupt support
  mfd: Add initialisation callback for WM8350
  mfd: Add GPIO pin configuration support for WM8350
  mfd: Add I2C control support for WM8350
  mfd: Core support for the WM8350 AudioPlus PMIC
  mfd: Add WM8350 watchdog register definitions
  mfd: Add WM8350 RTC register definitions
  mfd: Add WM8350 comparator register definitions
  mfd: Add WM8350 PMU register definitions
  mfd: Add WM8350 PMIC register definitions
  mfd: Add WM8350 GPIO register definitions
  mfd: Add WM8350 audio register definitions
  regulator: Export regulator name via sysfs
  regulator: Add WM8400 regulator support
  mfd: Core support for the WM8400 AudioPlus HiFi CODEC and PMU
  ...

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux...
Linus Torvalds [Tue, 14 Oct 2008 19:28:02 +0000 (12:28 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-fastboot

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-fastboot:
  raid, fastboot: hide RAID autodetect option if MD is compiled as a module
  raid: make RAID autodetect default a KConfig option
  warning: fix init do_mounts_md c
  fastboot: make the RAID autostart code print a message just before waiting
  fastboot: make the raid autodetect code wait for all devices to init
  fastboot: Fix bootgraph.pl initcall name regexp
  fastboot: fix issues and improve output of bootgraph.pl
  Add a script to visualize the kernel boot process / time

16 years agoRevert "vt: fix background color on line feed"
Linus Torvalds [Tue, 14 Oct 2008 19:12:02 +0000 (12:12 -0700)]
Revert "vt: fix background color on line feed"

This reverts commit c9e587abfdec2c2aaa55fab83bcb4972e2f84f9b, and the
subsequent commits that fixed it up:

 - afa9b649 "fbcon: prevent cursor disappearance after switching to 512
   character font"

 - d850a2fa "vt/fbcon: fix background color on line feed"

 - 7fe3915a "vt/fbcon: update scrl_erase_char after 256/512-glyph font
   switch"

by request of Alan Cox. Quoth Alan:
  "Unfortunately it's wrong and its been causing breakages because
   various apps like ncurses expect our previous (and correct)
   behaviour."

Alexander sent out a similar patch.

Requested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Tested-by: Jan Engelhardt <jengelh@medozas.de>
Cc: Alexander V. Lukyanov <lav@netis.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoocfs2: Make cached block reads the common case.
Joel Becker [Fri, 10 Oct 2008 00:20:34 +0000 (17:20 -0700)]
ocfs2: Make cached block reads the common case.

ocfs2_read_blocks() currently requires the CACHED flag for cached I/O.
However, that's the common case.  Let's flip it around and provide an
IGNORE_CACHE flag for the special users.  This has the added benefit of
cleaning up the code some (ignore_cache takes on its special meaning
earlier in the loop).

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>