From: Yinghai Lu Date: Mon, 8 Sep 2008 00:58:56 +0000 (-0700) Subject: x86: make 64 bit to use amd.c X-Git-Tag: v2.6.28-rc1~711^2^2~15 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=ff73152ced60871f7d5fb7dee52fa499902a3c6d;p=linux-2.6-omap-h63xx.git x86: make 64 bit to use amd.c arch/x86/kernel/cpu/amd.c is now 100% identical to arch/x86/kernel/cpu/amd_64.c, so use amd.c on 64-bit too and fix up the namespace impact. Simplify the Kconfig glue as well. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 6156ac25ff8..ab77d409fee 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -444,17 +444,9 @@ config CPU_SUP_CYRIX_32 help This enables extended support for Cyrix processors -config CPU_SUP_AMD_32 +config CPU_SUP_AMD default y bool "Support AMD processors" if PROCESSOR_SELECT - depends on !64BIT - help - This enables extended support for AMD processors - -config CPU_SUP_AMD_64 - default y - bool "Support AMD processors" if PROCESSOR_SELECT - depends on 64BIT help This enables extended support for AMD processors diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index d031f248dfc..510d1bcb058 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -10,8 +10,7 @@ obj-$(CONFIG_X86_64) += bugs_64.o obj-$(CONFIG_CPU_SUP_INTEL_32) += intel.o obj-$(CONFIG_CPU_SUP_INTEL_64) += intel_64.o -obj-$(CONFIG_CPU_SUP_AMD_32) += amd.o -obj-$(CONFIG_CPU_SUP_AMD_64) += amd_64.o +obj-$(CONFIG_CPU_SUP_AMD) += amd.o obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o obj-$(CONFIG_CPU_SUP_CENTAUR_32) += centaur.o obj-$(CONFIG_CPU_SUP_CENTAUR_64) += centaur_64.o diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c deleted file mode 100644 index 32e73520adf..00000000000 --- a/arch/x86/kernel/cpu/amd_64.c +++ /dev/null @@ -1,473 +0,0 @@ -#include -#include -#include - -#include -#include -#include - -#ifdef CONFIG_X86_64 -# include -# include -# include -#endif - -#include - -#include "cpu.h" - -#ifdef CONFIG_X86_32 -/* - * B step AMD K6 before B 9730xxxx have hardware bugs that can cause - * misexecution of code under Linux. Owners of such processors should - * contact AMD for precise details and a CPU swap. - * - * See http://www.multimania.com/poulot/k6bug.html - * http://www.amd.com/K6/k6docs/revgd.html - * - * The following test is erm.. interesting. AMD neglected to up - * the chip setting when fixing the bug but they also tweaked some - * performance at the same time.. - */ - -extern void vide(void); -__asm__(".align 4\nvide: ret"); - -static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c) -{ -/* - * General Systems BIOSen alias the cpu frequency registers - * of the Elan at 0x000df000. Unfortuantly, one of the Linux - * drivers subsequently pokes it, and changes the CPU speed. - * Workaround : Remove the unneeded alias. - */ -#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */ -#define CBAR_ENB (0x80000000) -#define CBAR_KEY (0X000000CB) - if (c->x86_model == 9 || c->x86_model == 10) { - if (inl (CBAR) & CBAR_ENB) - outl (0 | CBAR_KEY, CBAR); - } -} - - -static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c) -{ - u32 l, h; - int mbytes = num_physpages >> (20-PAGE_SHIFT); - - if (c->x86_model < 6) { - /* Based on AMD doc 20734R - June 2000 */ - if (c->x86_model == 0) { - clear_cpu_cap(c, X86_FEATURE_APIC); - set_cpu_cap(c, X86_FEATURE_PGE); - } - return; - } - - if (c->x86_model == 6 && c->x86_mask == 1) { - const int K6_BUG_LOOP = 1000000; - int n; - void (*f_vide)(void); - unsigned long d, d2; - - printk(KERN_INFO "AMD K6 stepping B detected - "); - - /* - * It looks like AMD fixed the 2.6.2 bug and improved indirect - * calls at the same time. - */ - - n = K6_BUG_LOOP; - f_vide = vide; - rdtscl(d); - while (n--) - f_vide(); - rdtscl(d2); - d = d2-d; - - if (d > 20*K6_BUG_LOOP) - printk("system stability may be impaired when more than 32 MB are used.\n"); - else - printk("probably OK (after B9730xxxx).\n"); - printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n"); - } - - /* K6 with old style WHCR */ - if (c->x86_model < 8 || - (c->x86_model == 8 && c->x86_mask < 8)) { - /* We can only write allocate on the low 508Mb */ - if (mbytes > 508) - mbytes = 508; - - rdmsr(MSR_K6_WHCR, l, h); - if ((l&0x0000FFFF) == 0) { - unsigned long flags; - l = (1<<0)|((mbytes/4)<<1); - local_irq_save(flags); - wbinvd(); - wrmsr(MSR_K6_WHCR, l, h); - local_irq_restore(flags); - printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n", - mbytes); - } - return; - } - - if ((c->x86_model == 8 && c->x86_mask > 7) || - c->x86_model == 9 || c->x86_model == 13) { - /* The more serious chips .. */ - - if (mbytes > 4092) - mbytes = 4092; - - rdmsr(MSR_K6_WHCR, l, h); - if ((l&0xFFFF0000) == 0) { - unsigned long flags; - l = ((mbytes>>2)<<22)|(1<<16); - local_irq_save(flags); - wbinvd(); - wrmsr(MSR_K6_WHCR, l, h); - local_irq_restore(flags); - printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n", - mbytes); - } - - return; - } - - if (c->x86_model == 10) { - /* AMD Geode LX is model 10 */ - /* placeholder for any needed mods */ - return; - } -} - -static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c) -{ - u32 l, h; - - /* - * Bit 15 of Athlon specific MSR 15, needs to be 0 - * to enable SSE on Palomino/Morgan/Barton CPU's. - * If the BIOS didn't enable it already, enable it here. - */ - if (c->x86_model >= 6 && c->x86_model <= 10) { - if (!cpu_has(c, X86_FEATURE_XMM)) { - printk(KERN_INFO "Enabling disabled K7/SSE Support.\n"); - rdmsr(MSR_K7_HWCR, l, h); - l &= ~0x00008000; - wrmsr(MSR_K7_HWCR, l, h); - set_cpu_cap(c, X86_FEATURE_XMM); - } - } - - /* - * It's been determined by AMD that Athlons since model 8 stepping 1 - * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx - * As per AMD technical note 27212 0.2 - */ - if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) { - rdmsr(MSR_K7_CLK_CTL, l, h); - if ((l & 0xfff00000) != 0x20000000) { - printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l, - ((l & 0x000fffff)|0x20000000)); - wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h); - } - } - - set_cpu_cap(c, X86_FEATURE_K7); -} -#endif - -#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) -static int __cpuinit nearby_node(int apicid) -{ - int i, node; - - for (i = apicid - 1; i >= 0; i--) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - return first_node(node_online_map); /* Shouldn't happen */ -} -#endif - -/* - * On a AMD dual core setup the lower bits of the APIC id distingush the cores. - * Assumes number of cores is a power of two. - */ -static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_X86_HT - unsigned bits; - - bits = c->x86_coreid_bits; - - /* Low order bits define the core id (index of core in socket) */ - c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); - /* Convert the initial APIC ID into the socket ID */ - c->phys_proc_id = c->initial_apicid >> bits; -#endif -} - -static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) -{ -#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) - int cpu = smp_processor_id(); - int node; - unsigned apicid = hard_smp_processor_id(); - - node = c->phys_proc_id; - if (apicid_to_node[apicid] != NUMA_NO_NODE) - node = apicid_to_node[apicid]; - if (!node_online(node)) { - /* Two possibilities here: - - The CPU is missing memory and no node was created. - In that case try picking one from a nearby CPU - - The APIC IDs differ from the HyperTransport node IDs - which the K8 northbridge parsing fills in. - Assume they are all increased by a constant offset, - but in the same order as the HT nodeids. - If that doesn't result in a usable node fall back to the - path for the previous case. */ - - int ht_nodeid = c->initial_apicid; - - if (ht_nodeid >= 0 && - apicid_to_node[ht_nodeid] != NUMA_NO_NODE) - node = apicid_to_node[ht_nodeid]; - /* Pick a nearby node */ - if (!node_online(node)) - node = nearby_node(apicid); - } - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -} - -static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_X86_HT - unsigned bits, ecx; - - /* Multi core CPU? */ - if (c->extended_cpuid_level < 0x80000008) - return; - - ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; - - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - - c->x86_coreid_bits = bits; -#endif -} - -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) -{ - early_init_amd_mc(c); - - /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - -#ifdef CONFIG_X86_64 - set_cpu_cap(c, X86_FEATURE_SYSCALL32); -#else - /* Set MTRR capability flag if appropriate */ - if (c->x86 == 5) - if (c->x86_model == 13 || c->x86_model == 9 || - (c->x86_model == 8 && c->x86_mask >= 8)) - set_cpu_cap(c, X86_FEATURE_K6_MTRR); -#endif -} - -static void __cpuinit init_amd(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned long long value; - - /* - * Disable TLB flush filter by setting HWCR.FFDIS on K8 - * bit 6 of msr C001_0015 - * - * Errata 63 for SH-B3 steppings - * Errata 122 for all steppings (F+ have it disabled by default) - */ - if (c->x86 == 0xf) { - rdmsrl(MSR_K7_HWCR, value); - value |= 1 << 6; - wrmsrl(MSR_K7_HWCR, value); - } -#endif - - early_init_amd(c); - - /* - * Bit 31 in normal CPUID used for nonstandard 3DNow ID; - * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway - */ - clear_cpu_cap(c, 0*32+31); - -#ifdef CONFIG_X86_64 - /* On C+ stepping K8 rep microcode works well for copy/memset */ - if (c->x86 == 0xf) { - u32 level; - - level = cpuid_eax(1); - if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - } - if (c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); -#else - - /* - * FIXME: We should handle the K5 here. Set up the write - * range and also turn on MSR 83 bits 4 and 31 (write alloc, - * no bus pipeline) - */ - - switch (c->x86) { - case 4: - init_amd_k5(c); - break; - case 5: - init_amd_k6(c); - break; - case 6: /* An Athlon/Duron */ - init_amd_k7(c); - break; - } - - /* K6s reports MCEs but don't actually have all the MSRs */ - if (c->x86 < 6) - clear_cpu_cap(c, X86_FEATURE_MCE); -#endif - - /* Enable workaround for FXSAVE leak */ - if (c->x86 >= 6) - set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - - if (!c->x86_model_id[0]) { - switch (c->x86) { - case 0xf: - /* Should distinguish Models here, but this is only - a fallback anyways. */ - strcpy(c->x86_model_id, "Hammer"); - break; - } - } - - display_cacheinfo(c); - - /* Multi core CPU? */ - if (c->extended_cpuid_level >= 0x80000008) { - amd_detect_cmp(c); - srat_detect_node(c); - } - -#ifdef CONFIG_X86_32 - detect_ht(c); -#endif - - if (c->extended_cpuid_level >= 0x80000006) { - if ((c->x86 >= 0x0f) && (cpuid_edx(0x80000006) & 0xf000)) - num_cache_leaves = 4; - else - num_cache_leaves = 3; - } - - if (c->x86 >= 0xf && c->x86 <= 0x11) - set_cpu_cap(c, X86_FEATURE_K8); - - if (cpu_has_xmm2) { - /* MFENCE stops RDTSC speculation */ - set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); - } - -#ifdef CONFIG_X86_64 - if (c->x86 == 0x10) { - /* do this for boot cpu */ - if (c == &boot_cpu_data) - check_enable_amd_mmconf_dmi(); - - fam10h_check_enable_mmcfg(); - } - - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { - unsigned long long tseg; - - /* - * Split up direct mapping around the TSEG SMM area. - * Don't do it for gbpages because there seems very little - * benefit in doing so. - */ - if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) { - printk(KERN_DEBUG "tseg: %010llx\n", tseg); - if ((tseg>>PMD_SHIFT) < - (max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) || - ((tseg>>PMD_SHIFT) < - (max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) && - (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT)))) - set_memory_4k((unsigned long)__va(tseg), 1); - } - } -#endif -} - -#ifdef CONFIG_X86_32 -static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size) -{ - /* AMD errata T13 (order #21922) */ - if ((c->x86 == 6)) { - if (c->x86_model == 3 && c->x86_mask == 0) /* Duron Rev A0 */ - size = 64; - if (c->x86_model == 4 && - (c->x86_mask == 0 || c->x86_mask == 1)) /* Tbird rev A1/A2 */ - size = 256; - } - return size; -} -#endif - -static struct cpu_dev amd_cpu_dev __cpuinitdata = { - .c_vendor = "AMD", - .c_ident = { "AuthenticAMD" }, -#ifdef CONFIG_X86_32 - .c_models = { - { .vendor = X86_VENDOR_AMD, .family = 4, .model_names = - { - [3] = "486 DX/2", - [7] = "486 DX/2-WB", - [8] = "486 DX/4", - [9] = "486 DX/4-WB", - [14] = "Am5x86-WT", - [15] = "Am5x86-WB" - } - }, - }, - .c_size_cache = amd_size_cache, -#endif - .c_early_init = early_init_amd, - .c_init = init_amd, - .c_x86_vendor = X86_VENDOR_AMD, -}; - -cpu_dev_register(amd_cpu_dev);