From: Chris Dearman Date: Mon, 26 Mar 2007 13:48:50 +0000 (+0100) Subject: [MIPS] lockdep: Deal with interrupt disable hazard in TRACE_IRQFLAGS X-Git-Tag: v2.6.21-rc6~45^2~5 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=fe99f1b184efb75c50dd8cbdfff99b559c2cb3b3;p=linux-2.6-omap-h63xx.git [MIPS] lockdep: Deal with interrupt disable hazard in TRACE_IRQFLAGS Between the mtc0 or di instruction that disables interrupts and the following hazard barrier a processor may still take interrupts. If an interrupt is taken after interrupts are disabled but before the state is updated it will appear to restore_all that it is incorrectly returning with interrupts disabled. Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 83843a229be..297bd56c234 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -128,6 +128,37 @@ handle_vcei: .align 5 NESTED(handle_int, PT_SIZE, sp) +#ifdef CONFIG_TRACE_IRQFLAGS + /* + * Check to see if the interrupted code has just disabled + * interrupts and ignore this interrupt for now if so. + * + * local_irq_disable() disables interrupts and then calls + * trace_hardirqs_off() to track the state. If an interrupt is taken + * after interrupts are disabled but before the state is updated + * it will appear to restore_all that it is incorrectly returning with + * interrupts disabled + */ + .set push + .set noat + mfc0 k0, CP0_STATUS +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + and k0, ST0_IEP + bnez k0, 1f + + mfc0 k0, EP0_EPC + .set noreorder + j k0 + rfe +#else + and k0, ST0_IE + bnez k0, 1f + + eret +#endif +1: + .set pop +#endif SAVE_ALL CLI TRACE_IRQS_OFF