From: Boaz Harrosh Date: Sun, 9 Sep 2007 18:06:23 +0000 (+0300) Subject: [SCSI] atp870u: convert to accessors and !use_sg cleanup X-Git-Tag: v2.6.25-rc1~1230^2~166 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=fe7ed98fd49a28287aca8b0ba8da8fb9ca35a055;p=linux-2.6-omap-h63xx.git [SCSI] atp870u: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh Acked-by: Christoph Hellwig Cc: jameshsu Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c index fec58cc47f1..db6de5e6afb 100644 --- a/drivers/scsi/atp870u.c +++ b/drivers/scsi/atp870u.c @@ -471,18 +471,8 @@ go_42: /* * Complete the command */ - if (workreq->use_sg) { - pci_unmap_sg(dev->pdev, - (struct scatterlist *)workreq->request_buffer, - workreq->use_sg, - workreq->sc_data_direction); - } else if (workreq->request_bufflen && - workreq->sc_data_direction != DMA_NONE) { - pci_unmap_single(dev->pdev, - workreq->SCp.dma_handle, - workreq->request_bufflen, - workreq->sc_data_direction); - } + scsi_dma_unmap(workreq); + spin_lock_irqsave(dev->host->host_lock, flags); (*workreq->scsi_done) (workreq); #ifdef ED_DBGP @@ -624,7 +614,7 @@ static int atp870u_queuecommand(struct scsi_cmnd * req_p, c = scmd_channel(req_p); req_p->sense_buffer[0]=0; - req_p->resid = 0; + scsi_set_resid(req_p, 0); if (scmd_channel(req_p) > 1) { req_p->result = 0x00040000; done(req_p); @@ -722,7 +712,6 @@ static void send_s870(struct atp_unit *dev,unsigned char c) unsigned short int tmpcip, w; unsigned long l, bttl = 0; unsigned int workport; - struct scatterlist *sgpnt; unsigned long sg_count; if (dev->in_snd[c] != 0) { @@ -793,6 +782,8 @@ oktosend: } printk("\n"); #endif + l = scsi_bufflen(workreq); + if (dev->dev_id == ATP885_DEVID) { j = inb(dev->baseport + 0x29) & 0xfe; outb(j, dev->baseport + 0x29); @@ -800,12 +791,11 @@ oktosend: } if (workreq->cmnd[0] == READ_CAPACITY) { - if (workreq->request_bufflen > 8) { - workreq->request_bufflen = 0x08; - } + if (l > 8) + l = 8; } if (workreq->cmnd[0] == 0x00) { - workreq->request_bufflen = 0; + l = 0; } tmport = workport + 0x1b; @@ -852,40 +842,8 @@ oktosend: #ifdef ED_DBGP printk("dev->id[%d][%d].devsp = %2x\n",c,target_id,dev->id[c][target_id].devsp); #endif - /* - * Figure out the transfer size - */ - if (workreq->use_sg) { -#ifdef ED_DBGP - printk("Using SGL\n"); -#endif - l = 0; - - sgpnt = (struct scatterlist *) workreq->request_buffer; - sg_count = pci_map_sg(dev->pdev, sgpnt, workreq->use_sg, - workreq->sc_data_direction); - - for (i = 0; i < workreq->use_sg; i++) { - if (sgpnt[i].length == 0 || workreq->use_sg > ATP870U_SCATTER) { - panic("Foooooooood fight!"); - } - l += sgpnt[i].length; - } -#ifdef ED_DBGP - printk( "send_s870: workreq->use_sg %d, sg_count %d l %8ld\n", workreq->use_sg, sg_count, l); -#endif - } else if(workreq->request_bufflen && workreq->sc_data_direction != PCI_DMA_NONE) { -#ifdef ED_DBGP - printk("Not using SGL\n"); -#endif - workreq->SCp.dma_handle = pci_map_single(dev->pdev, workreq->request_buffer, - workreq->request_bufflen, - workreq->sc_data_direction); - l = workreq->request_bufflen; -#ifdef ED_DBGP - printk( "send_s870: workreq->use_sg %d, l %8ld\n", workreq->use_sg, l); -#endif - } else l = 0; + + sg_count = scsi_dma_map(workreq); /* * Write transfer size */ @@ -938,16 +896,16 @@ oktosend: * a linear chain. */ - if (workreq->use_sg) { - sgpnt = (struct scatterlist *) workreq->request_buffer; + if (l) { + struct scatterlist *sgpnt; i = 0; - for (j = 0; j < workreq->use_sg; j++) { - bttl = sg_dma_address(&sgpnt[j]); - l=sg_dma_len(&sgpnt[j]); + scsi_for_each_sg(workreq, sgpnt, sg_count, j) { + bttl = sg_dma_address(sgpnt); + l=sg_dma_len(sgpnt); #ifdef ED_DBGP - printk("1. bttl %x, l %x\n",bttl, l); + printk("1. bttl %x, l %x\n",bttl, l); #endif - while (l > 0x10000) { + while (l > 0x10000) { (((u16 *) (prd))[i + 3]) = 0x0000; (((u16 *) (prd))[i + 2]) = 0x0000; (((u32 *) (prd))[i >> 1]) = cpu_to_le32(bttl); @@ -965,32 +923,6 @@ oktosend: printk("prd %4x %4x %4x %4x\n",(((unsigned short int *)prd)[0]),(((unsigned short int *)prd)[1]),(((unsigned short int *)prd)[2]),(((unsigned short int *)prd)[3])); printk("2. bttl %x, l %x\n",bttl, l); #endif - } else { - /* - * For a linear request write a chain of blocks - */ - bttl = workreq->SCp.dma_handle; - l = workreq->request_bufflen; - i = 0; -#ifdef ED_DBGP - printk("3. bttl %x, l %x\n",bttl, l); -#endif - while (l > 0x10000) { - (((u16 *) (prd))[i + 3]) = 0x0000; - (((u16 *) (prd))[i + 2]) = 0x0000; - (((u32 *) (prd))[i >> 1]) = cpu_to_le32(bttl); - l -= 0x10000; - bttl += 0x10000; - i += 0x04; - } - (((u16 *) (prd))[i + 3]) = cpu_to_le16(0x8000); - (((u16 *) (prd))[i + 2]) = cpu_to_le16(l); - (((u32 *) (prd))[i >> 1]) = cpu_to_le32(bttl); -#ifdef ED_DBGP - printk("prd %4x %4x %4x %4x\n",(((unsigned short int *)prd)[0]),(((unsigned short int *)prd)[1]),(((unsigned short int *)prd)[2]),(((unsigned short int *)prd)[3])); - printk("4. bttl %x, l %x\n",bttl, l); -#endif - } tmpcip += 4; #ifdef ED_DBGP