From: Erik Andrén Date: Wed, 26 Nov 2008 07:12:59 +0000 (-0300) Subject: V4L/DVB (10014): gspca - m5602: Remove all sensor specific write functions. X-Git-Tag: v2.6.29-rc1~556^2~98 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=fce65f6515f049dea9451afaa0e85af01aecd190;p=linux-2.6-omap-h63xx.git V4L/DVB (10014): gspca - m5602: Remove all sensor specific write functions. Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.c b/drivers/media/video/gspca/m5602/m5602_mt9m111.c index 0dedd3102a5..ae3b62ab452 100644 --- a/drivers/media/video/gspca/m5602/m5602_mt9m111.c +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.c @@ -266,50 +266,6 @@ out: return err; } -int mt9m111_write_sensor(struct sd *sd, const u8 address, - u8 *i2c_data, const u8 len) -{ - int err, i; - u8 *p; - struct usb_device *udev = sd->gspca_dev.dev; - __u8 *buf = sd->gspca_dev.usb_buf; - - /* No sensor with a data width larger - than 16 bits has yet been seen, nor with 0 :p*/ - if (len > 2 || !len) - return -EINVAL; - - memcpy(buf, sensor_urb_skeleton, - sizeof(sensor_urb_skeleton)); - - buf[11] = sd->sensor->i2c_slave_id; - buf[15] = address; - - p = buf + 16; - - /* Copy a four byte write sequence for each byte to be written to */ - for (i = 0; i < len; i++) { - memcpy(p, sensor_urb_skeleton + 16, 4); - p[3] = i2c_data[i]; - p += 4; - PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", - address, i2c_data[i]); - } - - /* Copy the tailer */ - memcpy(p, sensor_urb_skeleton + 20, 4); - - /* Set the total length */ - p[3] = 0x10 + len; - - err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x04, 0x40, 0x19, - 0x0000, buf, - 20 + len * 4, M5602_URB_MSG_TIMEOUT); - - return (err < 0) ? err : 0; -} - static void mt9m111_dump_registers(struct sd *sd) { u8 address, value[2] = {0x00, 0x00}; diff --git a/drivers/media/video/gspca/m5602/m5602_mt9m111.h b/drivers/media/video/gspca/m5602/m5602_mt9m111.h index 2c7b2a49c44..763b17ee617 100644 --- a/drivers/media/video/gspca/m5602/m5602_mt9m111.h +++ b/drivers/media/video/gspca/m5602/m5602_mt9m111.h @@ -90,9 +90,6 @@ int mt9m111_power_down(struct sd *sd); int mt9m111_read_sensor(struct sd *sd, const u8 address, u8 *i2c_data, const u8 len); -int mt9m111_write_sensor(struct sd *sd, const u8 address, - u8 *i2c_data, const u8 len); - int mt9m111_set_vflip(struct gspca_dev *gspca_dev, __s32 val); int mt9m111_get_vflip(struct gspca_dev *gspca_dev, __s32 *val); int mt9m111_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/video/gspca/m5602/m5602_ov9650.c index 5324397daf8..197a2026ec5 100644 --- a/drivers/media/video/gspca/m5602/m5602_ov9650.c +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.c @@ -102,50 +102,6 @@ out: return (err < 0) ? err : 0; } -int ov9650_write_sensor(struct sd *sd, const u8 address, - u8 *i2c_data, const u8 len) -{ - int err, i; - u8 *p; - struct usb_device *udev = sd->gspca_dev.dev; - __u8 *buf = sd->gspca_dev.usb_buf; - - /* The ov9650 only supports one byte writes */ - if (len > 1 || !len) - return -EINVAL; - - memcpy(buf, sensor_urb_skeleton, - sizeof(sensor_urb_skeleton)); - - buf[11] = sd->sensor->i2c_slave_id; - buf[15] = address; - - /* Special case larger sensor writes */ - p = buf + 16; - - /* Copy a four byte sequence for each byte to write over the I2C bus */ - for (i = 0; i < len; i++) { - memcpy(p, sensor_urb_skeleton + 16, 4); - p[3] = i2c_data[i]; - p += 4; - PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", - address, i2c_data[i]); - } - - /* Copy the tailer */ - memcpy(p, sensor_urb_skeleton + 20, 4); - - /* Set the total length */ - p[3] = 0x10 + len; - - err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x04, 0x40, 0x19, - 0x0000, buf, - 20 + len * 4, M5602_URB_MSG_TIMEOUT); - - return (err < 0) ? err : 0; -} - int ov9650_probe(struct sd *sd) { u8 prod_id = 0, ver_id = 0, i; diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.h b/drivers/media/video/gspca/m5602/m5602_ov9650.h index 293be3f7f76..1f33a7b8d6b 100644 --- a/drivers/media/video/gspca/m5602/m5602_ov9650.h +++ b/drivers/media/video/gspca/m5602/m5602_ov9650.h @@ -128,8 +128,6 @@ int ov9650_power_down(struct sd *sd); int ov9650_read_sensor(struct sd *sd, const u8 address, u8 *i2c_data, const u8 len); -int ov9650_write_sensor(struct sd *sd, const u8 address, - u8 *i2c_data, const u8 len); int ov9650_set_exposure(struct gspca_dev *gspca_dev, __s32 val); int ov9650_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.c b/drivers/media/video/gspca/m5602/m5602_po1030.c index 2c65f0c37ff..f52a3cd3343 100644 --- a/drivers/media/video/gspca/m5602/m5602_po1030.c +++ b/drivers/media/video/gspca/m5602/m5602_po1030.c @@ -99,48 +99,6 @@ out: return err; } -int po1030_write_sensor(struct sd *sd, const u8 address, - u8 *i2c_data, const u8 len) -{ - int err, i; - u8 *p; - struct usb_device *udev = sd->gspca_dev.dev; - __u8 *buf = sd->gspca_dev.usb_buf; - - /* The po1030 only supports one byte writes */ - if (len > 1 || !len) - return -EINVAL; - - memcpy(buf, sensor_urb_skeleton, sizeof(sensor_urb_skeleton)); - - buf[11] = sd->sensor->i2c_slave_id; - buf[15] = address; - - p = buf + 16; - - /* Copy a four byte write sequence for each byte to be written to */ - for (i = 0; i < len; i++) { - memcpy(p, sensor_urb_skeleton + 16, 4); - p[3] = i2c_data[i]; - p += 4; - PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", - address, i2c_data[i]); - } - - /* Copy the footer */ - memcpy(p, sensor_urb_skeleton + 20, 4); - - /* Set the total length */ - p[3] = 0x10 + len; - - err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x04, 0x40, 0x19, - 0x0000, buf, - 20 + len * 4, M5602_URB_MSG_TIMEOUT); - - return (err < 0) ? err : 0; -} - int po1030_init(struct sd *sd) { int i, err = 0; diff --git a/drivers/media/video/gspca/m5602/m5602_po1030.h b/drivers/media/video/gspca/m5602/m5602_po1030.h index 3a49d15bd35..c4dad64496c 100644 --- a/drivers/media/video/gspca/m5602/m5602_po1030.h +++ b/drivers/media/video/gspca/m5602/m5602_po1030.h @@ -130,8 +130,6 @@ int po1030_power_down(struct sd *sd); int po1030_read_sensor(struct sd *sd, const u8 address, u8 *i2c_data, const u8 len); -int po1030_write_sensor(struct sd *sd, const u8 address, - u8 *i2c_data, const u8 len); int po1030_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val); diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index 1c85453463c..acc0514f6ed 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -159,50 +159,6 @@ out: return err; } -int s5k4aa_write_sensor(struct sd *sd, const u8 address, - u8 *i2c_data, const u8 len) -{ - int err, i; - u8 *p; - struct usb_device *udev = sd->gspca_dev.dev; - __u8 *buf = sd->gspca_dev.usb_buf; - - /* No sensor with a data width larger than 16 bits has yet been seen */ - if (len > 2 || !len) - return -EINVAL; - - memcpy(buf, sensor_urb_skeleton, - sizeof(sensor_urb_skeleton)); - - buf[11] = sd->sensor->i2c_slave_id; - buf[15] = address; - - /* Special case larger sensor writes */ - p = buf + 16; - - /* Copy a four byte write sequence for each byte to be written to */ - for (i = 0; i < len; i++) { - memcpy(p, sensor_urb_skeleton + 16, 4); - p[3] = i2c_data[i]; - p += 4; - PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", - address, i2c_data[i]); - } - - /* Copy the tailer */ - memcpy(p, sensor_urb_skeleton + 20, 4); - - /* Set the total length */ - p[3] = 0x10 + len; - - err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x04, 0x40, 0x19, - 0x0000, buf, - 20 + len * 4, M5602_URB_MSG_TIMEOUT); - - return (err < 0) ? err : 0; -} - int s5k4aa_init(struct sd *sd) { int i, err = 0; diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h index 3d04ff9b264..a38103a88e1 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.h +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.h @@ -69,8 +69,6 @@ int s5k4aa_power_down(struct sd *sd); int s5k4aa_read_sensor(struct sd *sd, const u8 address, u8 *i2c_data, const u8 len); -int s5k4aa_write_sensor(struct sd *sd, const u8 address, - u8 *i2c_data, const u8 len); int s5k4aa_get_exposure(struct gspca_dev *gspca_dev, __s32 *val); int s5k4aa_set_exposure(struct gspca_dev *gspca_dev, __s32 val); diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.c b/drivers/media/video/gspca/m5602/m5602_s5k83a.c index 84a648d707c..3723030744f 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k83a.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.c @@ -107,50 +107,6 @@ out: return err; } -int s5k83a_write_sensor(struct sd *sd, const u8 address, - u8 *i2c_data, const u8 len) -{ - int err, i; - u8 *p; - struct usb_device *udev = sd->gspca_dev.dev; - __u8 *buf = sd->gspca_dev.usb_buf; - - /* No sensor with a data width larger than 16 bits has yet been seen */ - if (len > 2 || !len) - return -EINVAL; - - memcpy(buf, sensor_urb_skeleton, - sizeof(sensor_urb_skeleton)); - - buf[11] = sd->sensor->i2c_slave_id; - buf[15] = address; - - /* Special case larger sensor writes */ - p = buf + 16; - - /* Copy a four byte write sequence for each byte to be written to */ - for (i = 0; i < len; i++) { - memcpy(p, sensor_urb_skeleton + 16, 4); - p[3] = i2c_data[i]; - p += 4; - PDEBUG(D_CONF, "Writing sensor register 0x%x with 0x%x", - address, i2c_data[i]); - } - - /* Copy the tailer */ - memcpy(p, sensor_urb_skeleton + 20, 4); - - /* Set the total length */ - p[3] = 0x10 + len; - - err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x04, 0x40, 0x19, - 0x0000, buf, - 20 + len * 4, M5602_URB_MSG_TIMEOUT); - - return (err < 0) ? err : 0; -} - int s5k83a_init(struct sd *sd) { int i, err = 0; diff --git a/drivers/media/video/gspca/m5602/m5602_s5k83a.h b/drivers/media/video/gspca/m5602/m5602_s5k83a.h index 6a884d73ee7..73570112796 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k83a.h +++ b/drivers/media/video/gspca/m5602/m5602_s5k83a.h @@ -48,8 +48,6 @@ int s5k83a_power_down(struct sd *sd); int s5k83a_read_sensor(struct sd *sd, const u8 address, u8 *i2c_data, const u8 len); -int s5k83a_write_sensor(struct sd *sd, const u8 address, - u8 *i2c_data, const u8 len); int s5k83a_set_brightness(struct gspca_dev *gspca_dev, __s32 val); int s5k83a_get_brightness(struct gspca_dev *gspca_dev, __s32 *val); @@ -62,7 +60,6 @@ int s5k83a_set_vflip(struct gspca_dev *gspca_dev, __s32 val); int s5k83a_get_hflip(struct gspca_dev *gspca_dev, __s32 *val); int s5k83a_set_hflip(struct gspca_dev *gspca_dev, __s32 val); - static struct m5602_sensor s5k83a = { .name = "S5K83A", .probe = s5k83a_probe,