From: Malli Chilakala Date: Sat, 18 Jun 2005 00:30:22 +0000 (-0700) Subject: [PATCH] e100: e100_eeprom_load was called after e100_phy_init X-Git-Tag: v2.6.13-rc1~51^2~40^2~22 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=f92d872876617cddbb0532291034f88941e855fd;p=linux-2.6-omap-h63xx.git [PATCH] e100: e100_eeprom_load was called after e100_phy_init e100_eeprom_load was called after e100_phy_init causing phy_init not to use values set in EEPROM - from emann@mrv.com Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak --- diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 7e46d038b9f..8c7e2d17e75 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2340,11 +2340,11 @@ static int __devinit e100_probe(struct pci_dev *pdev, goto err_out_iounmap; } - e100_phy_init(nic); - if((err = e100_eeprom_load(nic))) goto err_out_free; + e100_phy_init(nic); + memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN); if(!is_valid_ether_addr(netdev->dev_addr)) { DPRINTK(PROBE, ERR, "Invalid MAC address from "