From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Mon, 2 Jun 2008 04:39:45 +0000 (-0400)
Subject: Input: atkbd - use ushort instead of uchar keymap
X-Git-Tag: v2.6.27-rc1~958^2~31
X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=f6d65610df3bd4e7138da03aec391224219df135;p=linux-2.6-omap-h63xx.git

Input: atkbd - use ushort instead of uchar keymap

Since some of the keycodes defined in input.h have values greater
than 255 we should use unsigned shorts in keymaps.

Tested-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 4a95adc4cc7..56857d1e56d 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -68,7 +68,7 @@ MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and
  * are loadable via an userland utility.
  */
 
-static unsigned char atkbd_set2_keycode[512] = {
+static const unsigned short atkbd_set2_keycode[512] = {
 
 #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
 
@@ -99,7 +99,7 @@ static unsigned char atkbd_set2_keycode[512] = {
 #endif
 };
 
-static unsigned char atkbd_set3_keycode[512] = {
+static const unsigned short atkbd_set3_keycode[512] = {
 
 	  0,  0,  0,  0,  0,  0,  0, 59,  1,138,128,129,130, 15, 41, 60,
 	131, 29, 42, 86, 58, 16,  2, 61,133, 56, 44, 31, 30, 17,  3, 62,
@@ -115,7 +115,7 @@ static unsigned char atkbd_set3_keycode[512] = {
 	148,149,147,140
 };
 
-static unsigned char atkbd_unxlate_table[128] = {
+static const unsigned short atkbd_unxlate_table[128] = {
           0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
          21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27,
          35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42,
@@ -161,7 +161,7 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_SCR_LEFT		249
 #define ATKBD_SCR_RIGHT		248
 
-#define ATKBD_SPECIAL		248
+#define ATKBD_SPECIAL		ATKBD_SCR_RIGHT
 
 #define ATKBD_LED_EVENT_BIT	0
 #define ATKBD_REP_EVENT_BIT	1
@@ -173,7 +173,7 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_XL_HANGEUL	0x10
 #define ATKBD_XL_HANJA		0x20
 
-static struct {
+static const struct {
 	unsigned char keycode;
 	unsigned char set2;
 } atkbd_scroll_keys[] = {
@@ -200,7 +200,7 @@ struct atkbd {
 	char phys[32];
 
 	unsigned short id;
-	unsigned char keycode[512];
+	unsigned short keycode[512];
 	DECLARE_BITMAP(force_release_mask, 512);
 	unsigned char set;
 	unsigned char translated;
@@ -357,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 	unsigned int code = data;
 	int scroll = 0, hscroll = 0, click = -1;
 	int value;
-	unsigned char keycode;
+	unsigned short keycode;
 
 #ifdef ATKBD_DEBUG
 	printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
@@ -959,16 +959,16 @@ static void atkbd_set_device_attrs(struct atkbd *atkbd)
 		input_dev->evbit[0] |= BIT_MASK(EV_REL);
 		input_dev->relbit[0] = BIT_MASK(REL_WHEEL) |
 			BIT_MASK(REL_HWHEEL);
-		set_bit(BTN_MIDDLE, input_dev->keybit);
+		__set_bit(BTN_MIDDLE, input_dev->keybit);
 	}
 
 	input_dev->keycode = atkbd->keycode;
-	input_dev->keycodesize = sizeof(unsigned char);
+	input_dev->keycodesize = sizeof(unsigned short);
 	input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
 
 	for (i = 0; i < 512; i++)
 		if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
-			set_bit(atkbd->keycode[i], input_dev->keybit);
+			__set_bit(atkbd->keycode[i], input_dev->keybit);
 }
 
 /*
diff --git a/include/linux/input.h b/include/linux/input.h
index eff711d8a45..af9c6314153 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -373,6 +373,8 @@ struct input_absinfo {
 
 #define KEY_WIMAX		246
 
+/* Range 248 - 255 is reserved for special needs of AT keyboard driver */
+
 #define BTN_MISC		0x100
 #define BTN_0			0x100
 #define BTN_1			0x101