From: Jeff Kirsher Date: Fri, 13 Jan 2006 00:50:39 +0000 (-0800) Subject: [PATCH] e1000: Fix adapter structure and prepare for multique fix X-Git-Tag: v2.6.16-rc2~366^2~42 X-Git-Url: http://pilppa.com/gitweb/?a=commitdiff_plain;h=f56799ea39a85a6f3760a134aa0e6d1c17eea369;p=linux-2.6-omap-h63xx.git [PATCH] e1000: Fix adapter structure and prepare for multique fix Fix adapter structure to handle multiple queues and prepping the driver for full multiple queue support, some changes are ifdef'd our unless you define CONFIG_E1000_MQ. Signed-off-by: Jeff Kirsher Signed-off-by: Jesse Brandeburg Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 4dd1326dd04..5940f7a223b 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -268,6 +268,7 @@ struct e1000_adapter { #ifdef CONFIG_E1000_MQ struct e1000_tx_ring **cpu_tx_ring; /* per-cpu */ #endif + unsigned long tx_queue_len; uint32_t txd_cmd; uint32_t tx_int_delay; uint32_t tx_abs_int_delay; @@ -303,7 +304,8 @@ struct e1000_adapter { struct call_async_data_struct rx_sched_call_data; int cpu_for_queue[4]; #endif - int num_queues; + int num_tx_queues; + int num_rx_queues; uint64_t hw_csum_err; uint64_t hw_csum_good; @@ -336,6 +338,7 @@ struct e1000_adapter { struct e1000_rx_ring test_rx_ring; + u32 *config_space; int msg_enable; #ifdef CONFIG_PCI_MSI boolean_t have_msi; diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 54ae8805e79..fa9a4659369 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -614,8 +614,8 @@ e1000_set_ringparam(struct net_device *netdev, struct e1000_rx_ring *rxdr, *rx_old, *rx_new; int i, err, tx_ring_size, rx_ring_size; - tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_queues; - rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_queues; + tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues; + rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues; if (netif_running(adapter->netdev)) e1000_down(adapter); @@ -654,10 +654,10 @@ e1000_set_ringparam(struct net_device *netdev, E1000_MAX_TXD : E1000_MAX_82544_TXD)); E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE); - for (i = 0; i < adapter->num_queues; i++) { + for (i = 0; i < adapter->num_tx_queues; i++) txdr[i].count = txdr->count; + for (i = 0; i < adapter->num_rx_queues; i++) rxdr[i].count = rxdr->count; - } if(netif_running(adapter->netdev)) { /* Try to get new resources before deleting old */ diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 7caa35748ce..1ddfd56fc5d 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -1497,6 +1497,7 @@ struct e1000_hw { #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ #define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */ #define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ +#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 #define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 #define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000 diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 5f848b3a3a4..540c8561fc2 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -411,8 +411,9 @@ e1000_up(struct e1000_adapter *adapter) e1000_configure_tx(adapter); e1000_setup_rctl(adapter); e1000_configure_rx(adapter); - for (i = 0; i < adapter->num_queues; i++) + for (i = 0; i < adapter->num_rx_queues; i++) { adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i]); + } #ifdef CONFIG_PCI_MSI if(adapter->hw.mac_type > e1000_82547_rev_2) { @@ -867,7 +868,7 @@ e1000_remove(struct pci_dev *pdev) unregister_netdev(netdev); #ifdef CONFIG_E1000_NAPI - for (i = 0; i < adapter->num_queues; i++) + for (i = 0; i < adapter->num_rx_queues; i++) __dev_put(&adapter->polling_netdev[i]); #endif @@ -972,15 +973,25 @@ e1000_sw_init(struct e1000_adapter *adapter) switch (hw->mac_type) { case e1000_82571: case e1000_82572: - adapter->num_queues = 2; + /* These controllers support 2 tx queues, but with a single + * qdisc implementation, multiple tx queues aren't quite as + * interesting. If we can find a logical way of mapping + * flows to a queue, then perhaps we can up the num_tx_queue + * count back to its default. Until then, we run the risk of + * terrible performance due to SACK overload. */ + adapter->num_tx_queues = 1; + adapter->num_rx_queues = 2; break; default: - adapter->num_queues = 1; + adapter->num_tx_queues = 1; + adapter->num_rx_queues = 1; break; } - adapter->num_queues = min(adapter->num_queues, num_online_cpus()); + adapter->num_rx_queues = min(adapter->num_rx_queues, num_online_cpus()); + adapter->num_tx_queues = min(adapter->num_tx_queues, num_online_cpus()); #else - adapter->num_queues = 1; + adapter->num_tx_queues = 1; + adapter->num_rx_queues = 1; #endif if (e1000_alloc_queues(adapter)) { @@ -989,7 +1000,7 @@ e1000_sw_init(struct e1000_adapter *adapter) } #ifdef CONFIG_E1000_NAPI - for (i = 0; i < adapter->num_queues; i++) { + for (i = 0; i < adapter->num_rx_queues; i++) { adapter->polling_netdev[i].priv = adapter; adapter->polling_netdev[i].poll = &e1000_clean; adapter->polling_netdev[i].weight = 64; @@ -1022,13 +1033,13 @@ e1000_alloc_queues(struct e1000_adapter *adapter) { int size; - size = sizeof(struct e1000_tx_ring) * adapter->num_queues; + size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues; adapter->tx_ring = kmalloc(size, GFP_KERNEL); if (!adapter->tx_ring) return -ENOMEM; memset(adapter->tx_ring, 0, size); - size = sizeof(struct e1000_rx_ring) * adapter->num_queues; + size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues; adapter->rx_ring = kmalloc(size, GFP_KERNEL); if (!adapter->rx_ring) { kfree(adapter->tx_ring); @@ -1037,7 +1048,7 @@ e1000_alloc_queues(struct e1000_adapter *adapter) memset(adapter->rx_ring, 0, size); #ifdef CONFIG_E1000_NAPI - size = sizeof(struct net_device) * adapter->num_queues; + size = sizeof(struct net_device) * adapter->num_rx_queues; adapter->polling_netdev = kmalloc(size, GFP_KERNEL); if (!adapter->polling_netdev) { kfree(adapter->tx_ring); @@ -1066,12 +1077,12 @@ e1000_setup_queue_mapping(struct e1000_adapter *adapter) lock_cpu_hotplug(); i = 0; for_each_online_cpu(cpu) { - *per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_queues]; + *per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_tx_queues]; /* This is incomplete because we'd like to assign separate * physical cpus to these netdev polling structures and * avoid saturating a subset of cpus. */ - if (i < adapter->num_queues) { + if (i < adapter->num_rx_queues) { *per_cpu_ptr(adapter->cpu_netdev, cpu) = &adapter->polling_netdev[i]; adapter->cpu_for_queue[i] = cpu; } else @@ -1291,7 +1302,7 @@ e1000_setup_all_tx_resources(struct e1000_adapter *adapter) { int i, err = 0; - for (i = 0; i < adapter->num_queues; i++) { + for (i = 0; i < adapter->num_tx_queues; i++) { err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]); if (err) { DPRINTK(PROBE, ERR, @@ -1319,7 +1330,7 @@ e1000_configure_tx(struct e1000_adapter *adapter) /* Setup the HW Tx Head and Tail descriptor pointers */ - switch (adapter->num_queues) { + switch (adapter->num_tx_queues) { case 2: tdba = adapter->tx_ring[1].dma; tdlen = adapter->tx_ring[1].count * @@ -1537,7 +1548,7 @@ e1000_setup_all_rx_resources(struct e1000_adapter *adapter) { int i, err = 0; - for (i = 0; i < adapter->num_queues; i++) { + for (i = 0; i < adapter->num_rx_queues; i++) { err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]); if (err) { DPRINTK(PROBE, ERR, @@ -1709,7 +1720,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ - switch (adapter->num_queues) { + switch (adapter->num_rx_queues) { #ifdef CONFIG_E1000_MQ case 2: rdba = adapter->rx_ring[1].dma; @@ -1736,7 +1747,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) } #ifdef CONFIG_E1000_MQ - if (adapter->num_queues > 1) { + if (adapter->num_rx_queues > 1) { uint32_t random[10]; get_random_bytes(&random[0], 40); @@ -1746,7 +1757,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) E1000_WRITE_REG(hw, RSSIM, 0); } - switch (adapter->num_queues) { + switch (adapter->num_rx_queues) { case 2: default: reta = 0x00800080; @@ -1838,7 +1849,7 @@ e1000_free_all_tx_resources(struct e1000_adapter *adapter) { int i; - for (i = 0; i < adapter->num_queues; i++) + for (i = 0; i < adapter->num_tx_queues; i++) e1000_free_tx_resources(adapter, &adapter->tx_ring[i]); } @@ -1905,7 +1916,7 @@ e1000_clean_all_tx_rings(struct e1000_adapter *adapter) { int i; - for (i = 0; i < adapter->num_queues; i++) + for (i = 0; i < adapter->num_tx_queues; i++) e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]); } @@ -1949,7 +1960,7 @@ e1000_free_all_rx_resources(struct e1000_adapter *adapter) { int i; - for (i = 0; i < adapter->num_queues; i++) + for (i = 0; i < adapter->num_rx_queues; i++) e1000_free_rx_resources(adapter, &adapter->rx_ring[i]); } @@ -2025,7 +2036,7 @@ e1000_clean_all_rx_rings(struct e1000_adapter *adapter) { int i; - for (i = 0; i < adapter->num_queues; i++) + for (i = 0; i < adapter->num_rx_queues; i++) e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]); } @@ -2325,7 +2336,10 @@ e1000_watchdog_task(struct e1000_adapter *adapter) e1000_update_adaptive(&adapter->hw); - if (adapter->num_queues == 1 && !netif_carrier_ok(netdev)) { +#ifdef CONFIG_E1000_MQ + txdr = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id()); +#endif + if (!netif_carrier_ok(netdev)) { if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) { /* We've lost link, so the controller stops DMA, * but we've got queued Tx work that's never going @@ -3197,14 +3211,12 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) E1000_WRITE_FLUSH(hw); #ifdef CONFIG_E1000_MQ if (atomic_read(&adapter->rx_sched_call_data.count) == 0) { - cpu_set(adapter->cpu_for_queue[0], - adapter->rx_sched_call_data.cpumask); - for (i = 1; i < adapter->num_queues; i++) { - cpu_set(adapter->cpu_for_queue[i], - adapter->rx_sched_call_data.cpumask); - atomic_inc(&adapter->irq_sem); - } - atomic_set(&adapter->rx_sched_call_data.count, i); + /* We must setup the cpumask once count == 0 since + * each cpu bit is cleared when the work is done. */ + adapter->rx_sched_call_data.cpumask = adapter->cpumask; + atomic_add(adapter->num_rx_queues - 1, &adapter->irq_sem); + atomic_set(&adapter->rx_sched_call_data.count, + adapter->num_rx_queues); smp_call_async_mask(&adapter->rx_sched_call_data); } else { printk("call_data.count == %u\n", atomic_read(&adapter->rx_sched_call_data.count)); @@ -3267,7 +3279,7 @@ e1000_clean(struct net_device *poll_dev, int *budget) while (poll_dev != &adapter->polling_netdev[i]) { i++; - if (unlikely(i == adapter->num_queues)) + if (unlikely(i == adapter->num_rx_queues)) BUG(); } diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 852841f12fb..b0be7d69af3 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -320,7 +320,7 @@ e1000_check_options(struct e1000_adapter *adapter) } else { tx_ring->count = opt.def; } - for (i = 0; i < adapter->num_queues; i++) + for (i = 0; i < adapter->num_tx_queues; i++) tx_ring[i].count = tx_ring->count; } { /* Receive Descriptor Count */ @@ -346,7 +346,7 @@ e1000_check_options(struct e1000_adapter *adapter) } else { rx_ring->count = opt.def; } - for (i = 0; i < adapter->num_queues; i++) + for (i = 0; i < adapter->num_rx_queues; i++) rx_ring[i].count = rx_ring->count; } { /* Checksum Offload Enable/Disable */